50/60/70/90 and

X-Model Series
Rim Clamp® Tire Changers
For servicing single piece automotive
and most tubeless light truck tire/wheel
assemblies.
Any other type, including tube type and agricultrual, require
special handling. Tires identified as truck tires need to
adhere to OSHA standard 1910.177.

* 70X-EH-3 Shown

Parts Identification
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for ease
of reference by supervisors and operators.

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 615/641-7533 800/688/6359 www.ammcoats.com Manual Part No.: 85607317 12
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO®, COATS® and BADA® Automotive Service Equipment and Tools. Revision: 9/15
 Parts Identification
The following pages include parts breakdowns with
exploded view illustrations to help with ordering
replacement or spare kits. Assemblies are noted
where it is recommended that individual parts not be
ordered separately. Note that the parts view illustra-
tions are for multiple models and not all parts shown
are on all models. Every effort is made to supply
accurate exploded views, however, due to interim
changes in manufacturing operations, some units
may not be exactly as illustrated.

2 • COATS Tire Changer

 Table of Contents
Parts Identification......................................... 2
Chassis System.............................................. 4
BL Arm Assembly........................................... 5
Inflation Bracket and Tower Assembly........ 6
Robo-Arm® Assembly.................................... 8
Swing Arm Assembly.................................. 10
Helper Arm Assembly.................................. 12
Foot Pedal Assemblies................................. 14
Electric Model Foot Pedal Assembly........ 14
Air Model Foot Pedal Assembly................ 16
Table Top and Shaft Housing Assembly... 18
Inflation Guard Assembly - 6065, 7665...... 20
Valve Assemblies......................................... 22
Cylinder Assemblies..................................... 23
Leverless Bead Lifter.................................... 24
Electrical Schematics................................... 26
Domestic and C.S.A.................................. 26
115V Motor, 2-speed................................. 27
Pneumatic Diagram...................................... 28
Notes............................................................. 30
Rim Clamp® Tire Changer............................ 32

COATS Tire Changer • 3

 Chassis System
Item Part No. Description Item Part No. Description
**1 8000491 Lube Applicator 16 8120055 5/8-11 Hex Nut
**2 8106259 Lube Bottle (Red) 17 8182041 Chassis
**3 8106301 1/4" Hex Hd Self Tap Screw, Gr.5 18 8181851 B.L. Pad, Front
**4 8182809 Lube Bottle Bracket 19 8182088 5/16-18 x 1-1/4 TPHST Screw, Gr.5
5 8182811 Inflation Pedal Cover 20 8181855 B.L. Center Pad
6 8181285 Inflation Pedal Decal **21 8181354 Bead Lifting Tool (Not Standard On
7 85607585 Metal Side Panel Leverless Unit)
8 8182040 M10-1.5 x 55MM Hex Hd.Cap Scr, *22
* 85000783 Lift Tool Bootie Kit, Pkg of 10
Gr.8.8 23 924724 312-18 Hex Flange Nut
9 8301032 3/8 Flat Washer, Zinc Plate 24 8185629 Tank Reservoir w/Cap
10 8107715 3/8-16 x 1-1/4 Hex Hd. Cap Scr, Gr.5 25 81856301 Tank Reservoir Cap
11 8181964 Plastic Accessory Tray 26 8183452 5/16-18x5/8 HWHCS Screw
85608840 Plastic Accessory Tray for Air Nozzle **27 85000850 Tire Paste Brush
12 8183770 Lubricator Bracket **28 8183710 Universal Mounting Paste
13 8183778 Lubrication Notice Decal **29 85009048 Lube Bucket Bracket & Brush Kit
14 85608582 3/4 x 3-1/2 SHSHS Screw

** Accessory Item

4 • COATS Tire Changer

 BL Arm Assembly
Item Part No. Description
†1 81833123 B.L. Cylinder, 1/4" Fitting (Hand
Operated)
81833125 B.L. Cylinder, 1/4” Fitting (70
Series, Hand Operated)
8183312 B.L. Cylinder, 3/8” Fitting (Foot
Operated)
2 8181949 5/8 x 1-3/8 Clevis Pin
3 8181912 Clevis Clip
4 8182016 3/4"-10 Nylon Insert Lock Nut, Gr.5
**5 8183606 Shoe Bootie Kit, Pkg of 2
6 85608038 B.L. Shoe, Handle & Pivot W/C
(Hand Operated)
8183529 B.L. Shoe, w/handle (Foot
Operated)
7 8182043 5/8-11 Nylon Insert Lock Nut Gr.5
8 8181951 B.L. Shoe Pivot Bracket
­ 9 8100979 3/4", Rubber Hand Grip (Hand
Operated)
­ 7000230 1/2” Rubber Hand Grip (Foot
Operated)
10 8182011 5/8-11 x 5" Hex Hd Cap Scr, Gr.5
*11 85608033 B.L. Arm Valve Assembly
8185755 B.L. Arm Valve Assy (old style)
12 902189 1/4-20 x.504 HHCS
13 8­182009 3/4-10 x 3 3/4" HHCS
14 8120326 ø1/2" Hitch Pin
15 8180230 B.L. Spring
16 85607837 Pivot Pin, B.L. Cylinder Rod
(Hand Operated)
8182550 Pivot Pin, B.L. Cylinder Rod
(Foot Operated)
17 8181970 Bead Loosener Caution Decal
18 8182768 Bead Loosener Caution Decal
19 8182002 B.L. Arm
20 8185558 Shoulder Screw
21 85000047 10/24 x 1” HHCS Screw
22 8301035 3/8-16 Hex Nyloc Nut
23 8182682 10-24 Nylon Insert Lock Nut Gr.5
24 85608037 Lever Link
25 8106301 1/4” Hex Hd Self Tap Screw, Gr.5
26 8182044 Neoprene Cushion Clamp
27 85608034 B.L. Lever Assembly
28 85608569 Heim Joint
29 8182457 Washer
30 85608567 Spacer
31 85608566 Spacer
32 8182579 Screw

† Cylinder Assemblies
 * Valve Assemblies (available only as individual
components, see page 22)
** Accessory Item

COATS Tire Changer • 5

 Inflation Bracket and
Tower Assembly
Item Part No. Description
1 8181933 Pedal Inflation
2 8102459 3/8" Self Tap Screw Gr.5
3 8107407 Hitch Pin Retainer
4 8104613 5/8" Ext. Tooth Lock Washer
5 8104611 5/8" N.F. Jam Nut Gr.5
6 8104610 3/4" N.F. Jam Nut Gr.5
7 8104612 3/4" Ext. Tooth Lock Washer
8 8181932 Inflation Brkt.
9 8180103 3/8 x 3-1/4 Clevis Pin
10 8104674 Bushing (3/4" Valve)
11 8106298 3/4" Valve Ported 1/4"-18 NPT
12 8143169 1/4-20 Whiz Lock Nut, Gr.5
13 8104600 1/4" Valve Comp.
14 8104673 ­Bushing (1/4" Valve)
15 8120408 1/4-20 x 1-3/4 H.H. Cap Scr., Gr.5
16 8120424 3/8"-16 Wash Hd. Lock Nut Gr.5
17 8182076 Shim Kit
18 85000816 Pressure Limiter
19 8000240 Washer 1" OD x 13/32 ID x 3/16"
20 8107715 3/8-16 x 1-1/4 Hex Hd. Cap Scr, Gr.8.8
21 8106303 3/8" Whiz Lock Nut, Gr.5
22 8106302 3/8" Whiz Lock Screw, Gr.5
23 8101018 0.392 x 0.687 x 0.0478 Washer
24 8181137 3/8-16 x 2-1/4 Hex Hd.Cap Scr, Gr.5
25 8182373 Warning Decal
8182373FR Warning Decal, French

6 • COATS Tire Changer

Item Part No. Description
26 8182016 3/4"-10 Nylon Insert Lock Nut, Gr.5
27 8100994 3/4 Flat Washer
28 8181114 Adjusting Knob Assy
85607820 Adjusting Lock Knob (Leverless)
29 8107517 Gauge Lens, Screw On
30 8107983 Plastic Fastener
31 8107985 Flanged Air Gauge w/Fasteners
32 8109888 Inflation Warning Decal
33 8183597 Release Valve Decal
34 8182457 3/4" SAE Washer
35 8182059 Line Press Gauge Decal
36 8183635 3/4-10 x 14-1/2" Hex Hd. Cap Scr,
Gr.5
37 8108968 Air Gauge
38 8182599 Safety Valve
39 8183434 Manifold/Gauge
40 8000378 1/4" Brass St. Fitting
41 8182458 Plastic Cap (Tower)
42 8183622 Tower/Air Receiver
8183764 Tower/Air Receiver (7665)
43 8109471 1/8" Brass Hex Nipple
44 8109468 Pressure Repeater
45 8110497 Male Elbow 1/8 NPT x 1/4 Hose
46 8109472 1/8" Inline Filter
47 8111083 Regulator
48 8182035 1/8 NPT x 1/4 Tube Male St. Fit.
49 85606362 13mm Spring Hose Clamp
50 8103649 ø1/4 x 12" Hose
51 8110496 Volumn Chamber
52 8110325 1/4" NPT Male Run Tee
53 8109466 Piloted Valve
54 8111255 1/4 NPT x 3/8 x 1/4 Spl Tee
55 8184459 3/8 x 25" Black Rubber Hose
56 8182221 6" Hose Clamp
57 85610105 Accessory Box Assembly
58 8000491 Lube Applicator
59 8106259 Lube Bottle (Red)
60 8181554 Accessory Tray Kit
61 8182167 Lube Bottle Brkt-Red
8182809 Lube Bottle Brkt-Red
62 8101346 Hose Clamp
63 85608894 Inflation Nozzle Cone
64 8104573 3/4" Straight Fitting
65 85000103 3/4" 45° EL Fitting
66 8107924 3/4” 90° Nylon EL Fitting
67 8182805 Tower Support Cover

COATS Tire Changer • 7

 Robo-Arm® Assembly
Item Part No. Description IHose Reels
1 85009167 Plastic Foot Hold Down Item Part No. Description
2 8301017 ø1/2" Steel Ball 50-ft. 85000375 1/4" ID x 1/2" OD Black Rubber Hose
3 8183637 ø2 Ext. Retaining Ring 50-ft. 85000376 1/8” OD x 0.25 Plastic Tube
4 7000230 1/2" Rubber Hand Grip 100-ft. 85609142 3/8” OD x 0.05 Plastic Tube
5 8183649 1/4-20 x 5/16" Soc Hd Set Screw
6 8181983 10-24 x 3/4 Lg. BHSCS
*7 8185757 Robo Arm Valve Assembly
9 85608884 Cylinder Assembly 2.5” Diameter
12 8181996 1/4 NPT x 1/8 Tube St. Fitting
13 ** 1/8 x 6" Plastic Tube
14 8106301 1/4-20 x 3/4" Soc Hd HWHST
Screw
15 8182044 Neoprene Cushion Clamp
16 8182016 3/4"-10 Nylon Insert Lock Nut, Gr.5
17 8100994 3/4" x 2" OD Flat Washer
18 8181038 Swing Arm Pivot Pin
19 ** 1/4, 58" Black Rubber Hose
20 8184904 Rear Arm Weldment
21 8184905 Front Arm Weldment
22 8183703 3/4-10 x 10-1/2” HHCS, Gr5
23 8182457 3/4” x 1-1/2” OD SAE Flat Washer
24 8184226 1/4-28 Grease Fitting
25 8183635 3/4-10 x 14-1/2” HHCS, Gr.5
26 8184059 Manifold Assembly
27 8000378 1/4” Brass St. Fitting
28 8108968 Air Gauge
29 8183434 Manifold/Gauge
30 8182599 Safety Valve
31 8109481 1/4 NPT x 1/8 NPT RDCR Fitting

* Valve Assemblies (available only as individual

components, see page 22)
**Hose Reels

8 • COATS Tire Changer

COATS Tire Changer • 9
 Swing Arm Assembly
Item Part No. Description Item Part No. Description
1 8183151 5/16-18 x 0.75 SBHCS, Gr.8 25 8183061 Duckhead Mount/Demount Tool Kit
2 8181771 Vertical Slide Knob (Nylon)
3 8182028 Vertical Slide Spring 26 85607803 Roller Mount
83031235 Vertical Slide Spring (Leverless) 27 85606462 Bead Roller (Duckhead) Pkg.
4 8182339 Swing Arm Shim Kit 28 8184432 Duckhead Mount/Demount Tool Kit
5 8181038 Swing Arm Pivot Pin (Grey)
6 8182820-2 Swing Arm, for R.H. Cam Lock 29 8183055 3/8-16 x 0.750 SBHCS Screw
8182820-3 Swing Arm, Locking (Leverless) 30 85607820 Adjusting Lock Knob
7 8100979 Handle Grip, Black Flex 3/4 I.D. 31 85000317 5/16-18 x 1-1/2 HSWHCS Screw,
8 8183673 Lock Handle/Lift Cam W/C, R.H. Zinc
9 8181095 1-5/8 Snap Ring 32 8107635 5/16" Plain Washer
10 8182371 1-5/8 Dia. Wave Washer 33 85607814 Lock Assembly
11 8181113 1/2"-13 Jam Nut, Gr. 5 34 85607816 Lock Block
12 85606343 Lock Plate 35 7000230 1/2 x 3 Handle Grip
13 8181035 Lock Plate Lift Pin 36 85608961 Hybrid Duckhead Tail
14 8182812 Vertical Slide Shaft 37 85608959 Hybrid Duckhead Mount/Demount
15 8182031 Rubber Bumper Tool Lever Type
16 85606344 1/2 x 5/8 Shoulder Screw 38 8184600 Manual Bead Depressor
17 8182813 3/8-16 x 3/4" Ctr Bore Cap Scr, Gr.8
18 8182027 7 ga. x .406 ID x 1.28 OD Washer
19 8106302 3/8" Whiz Lock Screw, Gr.5
20 8140667 1/4-20 x 1/4 Soc.Hd.Set Scr, Gr.8
21 8182786 5MM x 25MM Dowel Pin
22 8182787 0.562 Diameter x 0.515 LG. Roller
23 8182788 Duckhead® Mount/Demount Tool Kit
(Metal)

10 • COATS Tire Changer

Note: Standard and optional mount/demount tools shown.

COATS Tire Changer • 11

 Helper Arm Assembly
Item Part No. Description
1 8100964 1-1/4-inch Retaining Ring
2 8185593 Auxillary Arm Small Roller
3 8181983 10-24 x 5/8 BHSCS, Gr.8
*4 85609907 Helper Arm Valve Assembly
5 8180217 5/16-18 x 3/8-inch Set Screw
6 85609884 Front Arm Weldment
7 8185594 Auxillary Roller Shaft
8 8185592 Auxillary Arm Large Roller
9 8182579 HHCS Screw
10 8182016 3/4-10/E23 Nylon Hex Nut
11 85609886 Rear Arm Weldment
12 85610016 3/4-10 x 7 HHCS Screw, Gr.5
13 8182044 Neoprene Cushion Clamp
14 8106301 1/4” Hex Hd Self Tap Screw, Gr.5
15 85607010 3-inch Cylinder Assembly
16 85606919 Ext. Retaining Ring
17 8185035 13mm Flat Screw
18 85609897 Cylinder Rod End
19 85610249 Vertical Slide
20 8182457 Washer
21 85610284 SCS Flat HD Screw
22 85610250 Long Guide Gib
23 8143815 3/8-16 x 3-1/2 HHC Screw
24 85609885 Tube Bracket Weldment
25 8181872 Torsion Spring Sleeve
26 85609899 Female Half Clamp
27 8301035 3/8-16 Hex Nyloc Nut
28 7000230 1/2” Rubber Hand Grip
29 8184226 1/4-28 Grease Fitting
30 8106303 3/8” Whiz Lock Nut, Gr.5
31 85610241 Spacer
32 8181997 90º Elbow 1/8 NPT x 1/8” Fitting
33 8109481 1/4 NPT x 1/8 NPT RDCR Fitting
34 871101642 1/4 NPTMX, 1/4F TEE FITTING

* Valve Assemblies (available only as individual

components, see page 22)

12 • COATS Tire Changer

COATS Tire Changer • 13
 Foot Pedal Assemblies
Electric Model Foot Pedal Assembly
Item Part No. Description Item Part No. Description
1 8181918 Valve Brkt. Spacer Bar 50 8301072 #6 Internal Tooth Lk Washer
2 8181872 Torsion Spring Sleeve 51 8182958 Reversing Switch, Kit
3 8181948 1/2" Nylinder Bearing 52 8181728 Switch Actuator Lever
4 8181675 Standard Pedal 53 8181983 10-24 x 5/8 BHSCS, Gr.8
5 8182327 Pedal Spacer 55 8181959 Cover-Switch
6 8181911 Pedal Spacer 57 8182332 Guard-Foot Pedal
7 8182358 Pedal Spacer 58 8106455 Clevis Pin
­ 8 8181369 1/4-20 Lock Nut, Nyl. Ins. Gr.5 59 8103737 Release Valve
9 8182670 Spring Stop Bracket 60 902189 1/4-20 x.504 HHCS
10 8181707 Torsion Spring 61 8111032 1/4" Heavy Fender Washer
11 8104945 1/4 x 1 HWHSTC, Gr.5 62 85609741 2-Speed, 2-Wire Harness
12 8181977 3/16" x 1-1/2" Clevis Pin 63 85609742 2-Speed, 4-Wire Harness
13 8120469 Hair Pin Cotter 64 85609743 Disk Switch
14 8181984 1/4-20 x 1" Hx.Hd.Cp.Scr., Gr.5 65 85609746 Foot Pedal Switch
15 8181923 Stop Washer 66 85609748 1/4-20 Allen Nut
17 8182682 10-24 Nylon Insert Lock Nut Gr.5 67 85609917 2-Speed, Switch Plate
18 8181699 Lever Assembly - Switch 68 95000064 #4-40 x 3/4 Lg. SHC Screw
19 8182743 10-24 x 3/8 SHCSS Gr.8
20 8182363 Spacer - Sw Pedal Lever-Red
21 85010038 Cam Lever Follower * Valve Assemblies (available only as individual
23 8107635 5/16" Flat Washer components, see page 22)
24 85608197 Pedal Stop ** Accessory Item
25 8111609 Hair Pin Cotter
26 8301121 Washer
27 8183398 Pedal Shaft
28 85009985 Valve Mounting Bracket
29 8106301 1/4" Hex Hd Self Tap Screw, Gr.5
30 8181989 10-24 x 3/8 SHCS, Gr.8
31 8182001 10-24 x 3/4 SHCS
37 85600262 Valve Assembly
38 8182588 Valve Assembly
44 85009982 Spacer-Valve, Clamp, TT
45 8301537 5/16-18 x 1/2 SHSHS Screw
46 85008195 Pivot Link
47 8184675 Oil Injector Assembly
48 85608560 Block-Lower Stop Pedal
49 8103737 Release Valve

14 • COATS Tire Changer

COATS Tire Changer • 15
Air Model Foot Pedal Assembly
Item Part No. Description
1 8181918 Bar-Valve Brkt. Spacer
2 8181872 Torsion Spring Sleeve
3 8181948 1/2" Nylinder Bearing
4 8181675 Standard Pedal
5 8182327 Pedal Spacer
6 8181911 Pedal Spacer
7 8182358 Pedal Spacer
­ 8 8181369 1/4-20 Lock Nut, Nyl. Ins. Gr.5
12 8181977 3/16" x 1-1/2" Clevis Pin
13 8120469 Hair Pin Cotter
14 8181984 1/4-20 x 1” Hx.Hd.Cp.Scr., Gr.5
16 8181708 Pedal Extension Spring
21 85010038 Cam Lever Follower
23 8107635 5/16” Flat Washer
24 85608197 Stop-Pedal
25 8111609 Hair Pin Cotter
26 8301121 Washer
27 8183398 Pedal Shaft
28 85009985 Valve Mounting Bracket
29 8106301 1/4" Hex Hd Self Tap Screw, Gr.5
30 8181989 10-24 x 3/8 SHCS, Gr.8
31 8182001 10-24 x 3/4 SHCS
36 8182066 Valve Assembly
37 85600262 Valve Assembly
38 8182588 Valve Assembly
40 85600263 Valve Assembly
44 85009982 Spacer-Valve, Clamp, TT
45 83015371 5/16-18 x 1/2 SHSHS Screw
46 85608195 Pivot Link
47 8184675 Oil Injector Assembly
48 85608560 Block-Lower Stop Pedal
49 8103737 Release Valve
57 8182332 Foot Pedal Guard
58 8106455 Clevis Pin

* Valve Assemblies (available only as individual

components, see page 22)
** Accessory Item

16 • COATS Tire Changer

COATS Tire Changer • 17
 Table Top and Shaft Housing
Assembly
Item Part No. Description Item Part No. Description
1 8181929 3/8-16 x 1”, Gr.8 Skt. Hd. Cap Scr. 31 8180047 Motor V-Belt, 4L380
2 8181704 Table Top Plate 85608496 Motor V-Belt, 4L390
3 8182024 Inflation Nozzle 32 8182178 5/16-18, Hex. Whiz Lock Nut
4 8182025 1/4" Steel Ball 33 85609921 Motor Mounting Bracket
5 8182083 3/4" Jam Nut 34 8143044 Tinnerman Sq. Captive Nut 3/8-16
6 8184126EX Adjustable Rim Clamp 35 8184691 Motor, Electric 115V
7 8182250 Adj. Clamp Plunger/Spring Assy. 8182621 Motor, Electric 220V, 50Hz, 1ø
8 8182248 Carrier/Cover - Cylinder End 85609751 Motor, Electric 115V, 60Hz, 2-speed
9 8101039 1/2" Lock Nut, Gr.5 (90x only)
10 8182249 Carrier/Cover - Clamp Adj. 36 8184562 Motor Cable Assy, 4-wire w/plug,
11 8181734 Pivot Link W/C 115V
12 8182279 Adj. Clamp Link Bolt 8181511 Motor Cable Assembly, 4-wire,
13 8181731 Table Top Pivot Plate 220V
14 8183476 ø1/4" x 3/4" Roll Pin 37 8181190 Air Motor, Gast. 6AM
15 8181733 Pivot Block 38 85606398 Exhaust Valve
16 8183452 5/16-18 x 5/8" Flange Whiz-lock Scr. 39 8181206 1/2" NPT Muffler
†17 8182613 Table Top Cylinder Assembly 40 85607160 3-position Laminated Clamp Cover
18 8182627 1-5/8” Dia. Cap Plug Plus Points
19 8181742 16MM x 40mm Hex Head Bolt 85607429 3-position Laminated Clamp Cover
Gr.10.9 Plus w/o Points
20 8182979 ø16mm Molded Washer 41 85607161 Laminated Clamp Plus Grip
21 8181990 Spider Assembly 42 85000610 1/4 x 1-1/4 x #10-24 Shoulder Screw
22 8182619 Rotary Coupling Assembly 43 85607159 3-position Laminated Clamp Plus
23 8182186 Transmission Dipstick & Tube **44 8183604 Bootie Kit, Rim Clamp, Pkg of 10
25 85606734 Transmission Pulley (3-hole) **45 85607787 Grip Max Plus™, Laminated
85607708 Transmission Pulley (4-hole) Clamps, Pkg. of 4
8181658 Transmission Pulley (6-hole) 85607786 Grip Max Plus™, Laminated Clamps
26 8140567 1/2-13, Hex. Whiz-lock Nut (External Clamp Only), Pkg. of 4
27 8183156 ø2" X ø2 3/4" x .010 Washer 46 8182682 #10-24 Rvsble Hex Lk Nut
28 85608497 Transmission Kit 47 8301805 #10 Washer
29 8120325­­ 5/16-18 x 1 Ser. Wash.Hd.Scr., Gr.5 48 85609097 Hole Plug (Table w/o Inflation Jets)
30 8184674 Motor Pulley 49 85610108 Transmission Hole Plug

† Cylinder Assemblies
** Accessory Item

18 • COATS Tire Changer

 Table Top and Shaft Housing Assembly

46
48 47
44 Torque to 40
20-35 ft. lb. 1 3 41
7 4
6 2 42
5 43
6 7
7
8 45 Grip-Max™ Plus
10

11
9

12
1/4 -1/2
Turn Loose
13
14
1/4 -1/2
Turn Loose 15
Torque to
16 14-18 ft. lb.
Torque to 9
18
175 ft. lb. 17
19

20 31

29
32
21 33
33
30
22 30
34 34
49
32
23
29
27 37
26 25 24 35

38
36
39
28

Electric Motor Air Motor

APPLY GREASE TO THESE LOCATIONS

COATS Tire Changer • 19

 Inflation Guard Assembly -
6065, 7665
Item Part No. Description
Item Part No. Description
1 8182318 Handle Spring-B.L. (7665)
19 8182090 3/4" x 61" Lg. Hose
2 8104611 5/8" N.F. Jam Nut Gr.5
31 8102048 ø1/4" x 15" Hose
3 8104613 5/8" Ext. Tooth Lock Washer
32 8110328 1/8" NPT Tee
4 8182981 Warning Decal
33 8181213 ø1/4" x 3" Hose
5 8120408 1/4-20 x 1-3/4 H.H. Cap Scr., Gr.5
34 8182367 1/4 NPT Brass Cross Fit.
6 8106301 1/4" Hex Hd Self Tap Screw, Gr.5
35 8108605 Female Coupling Assembly
7 8182862 Valve Actuator
36 8000580 1/4 NPT Close Nipple
8 8182842 Front Cover
37 8104969 Check Valve
9 8183067 19" Trim Strip
38 8183120 Inflation Guard Pkg
10 8104673 ­Bushing, 1/4" Valve
39 8183237 Safety Cage Handles Cover
11 8105671 End Cap, 1/4" Valve
40 920531 ø1" x 0.281 x 0.063 Washer
12 8102468 Poppet Spring, 1/4" Valve
41 8301035 3/8-16 Nylok Nut
13 8104649 Poppet, 1/4" Valve
42 8106302 3/8" Whiz Lock Screw, Gr.5
14 8104600 1/4" Valve Comp.
43 8182846 1/2-13 x 5 U-Bolt
15 8000378 1/4" Brass St. Fitting
44 8301122 0.500-13 NYLK Hex Nut
16 85606362 Hose Clamp-13mm Spring
17 8103649 ø1/4 x 12" Hose
18 8000376 ELL 90º 1/4 Hose Fitting
20 8106289 ø1/4” x 22” Hose
21 8110325 1/4” NPT Male Run Tee
22 8109466 Piloted Valve
23 8143169 1/4-20 Whiz Lock Nut, Gr.5
24 8110496 Volumn Chamber
25 8109471 1/8” Brass Hex Nipple
26 8109468 Pressure Repeater
27 8109472 1/8” Inline Filter
28 8111083 Regulator
29 8104844 1/8 NPT x 1/4 Hose St Fitting

20 • COATS Tire Changer

COATS Tire Changer • 21
 Valve Assemblies

Table Top Clamp Pedal Table Top Clamp Pedal Robo Arm Helper Arm
Valve Assembly Valve Assembly Valve Assembly Valve Assembly

Bead Loosener Arm Bead Loosener Arm Bead Loosener Arm Air Motor Pedal
Valve Assy (old style) Valve Assembly Valve Assembly Valve Assembly

Item Part No. Description Item Part No. Description

1 8000372 1/4 NPT, 90º St. ELL Fitting 13 8184469 1/4" NPT x 3/8 BRB x 1/4B Tee
2 8000378 1/4" Brass St. Fitting Fitting
3 8000376 ELL 90º 1/4 Hose Fitting 14 8181986 4-Way w/Pull Pin Valve
4 8185581 3 Position w/Handle Valve 15 906960 1/4 NPT Muffler
5 85607855 1/4 NPT Muffler, Small 16 8184256 1/4 NPT, 1/4 HSE ELL Fitting
6 8105615 Small Muffler 17 8184878 4-way Valve, Pedal Operated
7 8185585 3 Position Valve 18 85609908 3 Position Valve
8 8109481 1/4 NPT x 1/8 NPT RDCR Fitting
9 8181997 90º Elbow 1/8 NPT x 1/8" Fitting
10 8101898 St. 1/4" NPT 3/8" Hose Fitting
11 8184369 4-Way w/Pull Pin Valve
12 8184467 1/4" NPT x 3/8 BRB x 3/8B Tee
Fitting

22 • COATS Tire Changer

 Cylinder Assemblies
Item Part No. Description
1 8183310 B.L. Cylinder Bottom Cap
2 8182016 3/4"-10 Nylon Insert Nut, Gr.5
3 8181860 B.L. Cylinder Lower Washer
4 8181863 B.L. Cylinder Upper Washer
5 85607881 O-ring
6 8181574 B.L. Cylinder Barrel
7 8183309 B.L. Cylinder Top Cap
8 8181862 Tie Bolt, 1/2-13 x 10-1/4” Lg., Gr.5
9 8182079 Seal Kit, B.L. Cylinder
*10 8000376 ELL 90º 1/4 Hose Fitting - Hand B/L
8184256 ELL 90º 3/8 Hose Fitting - Foot B/L
11 8183311 Piston Rod, All 50 Series & 70 Series
w/ Foot B.L.
85608568 Piston Rod, 70 Series Hand B.L. w/
Heim Joint

Item Part No. Description

1 8181183 5/16-18 Nylon Insert Lock Nut Gr.5
2 8181622 Cylinder Bottom Cap
3 8182719 1/2-13 Locking Jam Nut, Gr.5
4 8183771 1-38 OD x 1/2 ID x 0.062 Washer
5 8181629 Shaft, Tabletop Cyl.
6 8181627 Sleeve, Cylinder
7 8181620 Cylinder Top Cap
8 8181633 Tie Bolt, Tabletop Cylinder
9 8183772 Table Top Cylinder Seal Kit

*Not Shown

COATS Tire Changer • 23

 Leverless Bead Lifter

I tem No Part No. Description I tem No Part No. Description

1 84297851 Handle 22 83017302 12/18/6, 5 Ferrule
2 87019215 Valve Box 23 83019210 Pin - 54mm long
3 84399954 8 x 20 Screw 24 83019214 Connection Rod
4 84395374 M8 Nut 25 84393753 5 x 8 Screw
5 83030571 6 x 4 Spiral Hose, L=1500 26 89233409 Front Slide
6 84198285 5-way Valve 27 83019212 Tool Pin - 26mm long
7 82006996 Valve 28 83019213 Touchless Tool
8 84198618 1/8" Union 29 83010284 D.14 x 45 M5 Control Handle
9 84399829 8 (8, 4 x 16 x 1,5) Washer 30 83019211 Cylinder Pin
10 84399900 M8 Self-locking Nut 31 83019561 Support Plate
11 84393957 10 x 12 Screw 32 84194004 MR 41 6 M6 Union
12 84399864 D.12 Seeger Ring 33 84199161 1/8" Plug
13 84395530 12 x 2 Screw 34 84199610 1/8" Silencer
14 84393346 Screw 35 84399957 6 x 8 Screw
15 89233409 Back Slide 36 82031707 Cylinder Unit
16 83033830 Touchless Mounting Tool 37 84399976 Nut M8
18 83019202 Connection Plate 38 84298822 O-ring D.68, 26 x 3, 53
19 84399434 12 x 20 Screw 39 84399865 Self-locking Nut M12
20 84398637 ID 12 x 21 x 2, 5 Washer 40 84198856 D.75 Piston
21 83017334 12/18/8, 2 Bush 41 83031708 Cylinder Shaft

24 • COATS Tire Changer

 70X Series

I tem No Part No. Description I tem No Part No. Description

42 83019208 8 x 1, 25 x 180 Special Screw 64 8101898 3/8" Barb
43 83019204 M8 X 1, 25 x 164 Special Screw 65 8000643 Tee
44 83031709 Cylinder Liner L=125 67 84395804 2 x 35 x 5, G Type 14, Washer
45 83015024 Flange 68 84395805 2 x 21 x 4, C Type 10, Washer
46 83199601 Scraper 69 8107715 3/8-16 UNC Screw, L=1.25"
47 83019467 D.75 SO Side Hole M6 Back *85 84199461 Adapter
Flange *86 84194089 1/8" Union
48 87019199 Tool Holder *87 84194088 Quick Union
49 83019959 6 x 6 Hose L=240 *88 84198993 1/8" Quick Union
51 84396878 12 x 25 x 0, 5 Steel Shim *89 84199026 Union
52 83031595 Threaded Tab 90 85608961 Hybrid Duckhead® Tail
53 8099053 1/4" Hose L=7.5 Ft 91 85608960 Hybrid Duckhead, Mount/Demount
54 83031235 Spring Tool, Leverless
55 8106301 1/4-20 Screw
58 8182044 Hose Clamp *Not Shown
59 85606362 1/4" Clamp
60 8000378 1/4" Barb
63 85606363 3/8" Clamp

COATS Tire Changer • 25

 Electrical Schematics
Domestic and C.S.A.

Power Cords
Part No. Description
8182257 115V
8184962 220V, 50 Hz
85606402 China Only
85609034 Australia Only

26 • COATS Tire Changer

115V Motor, 2-speed

COATS Tire Changer • 27

 Pneumatic Diagram

28 • COATS Tire Changer

COATS Tire Changer • 29
 Notes

30 • COATS Tire Changer

COATS Tire Changer • 31
 Rim Clamp® Tire Changer
All-Air Unit Compressed Air Requirements
COATS® Rim Clamp® tire changers that are powered entirely by air (no electric motor) require a single com-
pressed air power source. Refer to the table below for exact specifications.
Tire Changer Model Compressor Size Capable of
All 5 HP 14-15 SCFM at 150 PSI

Oil Injector Maintenance

The oil injector (on units so equipped) typically require annual service. The oil level in the oil reservoir tank should
be checked regularly.
1. Add oil to the oil reservoir tank if the fluid level in the tank is at the “add” mark. Remove cap from the oil
reservoir tank and add Chevron Regal® R & O 32 oil to the “full” mark. Replace the cap and clean up any spilled oil.
Important: If the hose between the reservoir and injector is ever empty of oil, an air lock will form. After filling
the reservoir tank, the line must be bled of air at the injector connection as follows:
a. Remove the side panel and locate the oil injector.
b. Loosen the bleeder screw until oil drips from the screw (or press bleeder button, if so equipped).
c. Retighten bleeder screw (if required).
d. Cycle the clamp valve a few times checking for oil and air leaks.
e. Test the machine for full function before returning the machine to operation.
Air Gauge Check and Recalibration
1. Inflate a standard 15" passenger car tire/wheel assembly to 32 PSI. Use a high quality stick-type pressure
gauge to verify the pressure. Attach the tire changer’s inflation hose to the valve stem and check the pressure
reading on the air gauge. If it does not read 32 PSI, recalibrate the gauge.
2. Remove the screw-on lens. Loosen the 2 screws on the face of the gauge. Loosen them just enough so that
the gauge face moves. Do not remove the screws.
3. Rotate the gauge face until the 32 PSI mark is aligned with the gauge needle. Tighten the 2 screws and
replace the lens.
Danger, Warning, Caution, and Instructional Decals
Always make the cleaning of these important decals a part of your regular maintenance routine. If they are dam-
aged or illegible, replace them immediately. Your safety, and the safety of others is involved!
Regal® is a trademark of Chevron Products Company

85607317 12 9/2015 © Copyright 2011 Hennessy Industries and COATS® All Rights Reserved. Printed in USA