Application of Geotextiles in Pavement Drainage Systems: Dr. Umesh Sharma, Abhishek Kanaoungo and Ankita Khatri

International Journal of Civil Engineering Research.
ISSN 2278-3652 Volume 5, Number 4 (2014), pp. 385-390

© Research India Publications
http://www.ripublication.com/ijcer.htm
Application of Geotextiles in Pavement Drainage Systems
Dr. Umesh Sharmaa, Abhishek Kanaoungob and Ankita Khatric

a1
Deptt. of Civil Engineering , PEC University of Technology, Sector-12 Chandigarh,
b
P.G. Student, Deptt. of Civil Engineering , PEC University of Technology,
Sector-12 Chandigarh.
c
P.G. Student, Deptt. of Civil Engineering , PEC University of Technology,
Sector-12 Chandigarh.
Abstract
Geo-textiles are the permeable fabrics which, when used in association

with soil have the ability to separate, filter, reinforce, protect, or drain.
Typically made from polypropylene or polyester, geo-textile fabrics
come in three basic forms: woven, needle punched, or heat bonded.
The original and still sometimes used term for geo-textiles is filter
fabrics . Geo-textiles have many applications and currently support
many civil engineering applications including roads, airfields,
embankments, retaining structures, reservoirs and construction site.
Geo-textiles have a major role in construction of paved roads over
areas having high ground water table. There are several key
applications, construction of pavements, in asphalt concrete overlays
and for drainage systems, which helps in enhancing the performance
and extending the service life of roads. Drainage of water from
pavements has always been an important consideration in road design.
When functioning as a drain, geo-textiles acts as a conduit for the
movement of liquid or gases in the plane of geo-textile. Some of the
geo-textiles used for drainage are wick drains and blanket drains. In
this paper, various options available to the civil engineers in the use of
geo-textile in the pavement drainage systems have been highlighted.
Keywords: Geo-textiles, pavement, drainage.
1. Introduction
Geo-textiles were one of the first textile products in human history. Excavations of
ancient Egyptian sites show the use of mats made of grass and linen. Geo-textiles have
386 Dr. Umesh Sharma et al
been used very successfully in road construction for over 30 years. Water has lots of
adverse effects on pavement performance. In fact, moisture damage in asphalt
pavements is global concern. In situation when rainwater is not properly drained off
the pavement surface, it will penetrate into the pavement thereby deteriorating the
pavement layers. Geo-textiles when used for drainage purpose, it act as a permeable
separator that allows water to pass into the drainage system, while preventing
pavement layers. Key characteristics of drainage geo-textile are the AOS (Apparent
Opening Size), which indicates the size of openings in the material, and flow rate,
which indicates how much water, can pass through the geotextile.
2. Important Characteristics of Geotextiles

The characteristics of geo-textiles are broadly classified as:
2.1. Physical properties

Specific gravity, weight, thickness, stiffness, density
2.2 Mechanical properties

Tenacity, tensile strength, bursting strength, drapability, compatibility, flexibility,
tearing strength, frictional resistance.
2.3 Hydraulic properties

Porosity, permeability, permittivity, transitivity, turbidity /soil retention, filtration
length etc
2.4 Endurance properties

Elongation, abrasion resistance, clogging length and flow etc
Figure 1: Geo-textile used for drainage.
3. Types of Geotextiles
Geo-textiles are a permeable synthetic material made of textile materials. The geo-
textiles are further prepared in three different categories – woven fabrics, non-woven
fabrics and knitted fabrics
Application of Geotextiles in Pavement Drainage Systems 387
3.1 Woven fabrics

Large numbers of geo-synthetics are of woven type, which can be sub-divided into
several categories based upon their method of manufacture. As their name implies,
they are manufactured by adopting techniques which are similar to weaving usual
clothing textiles. This type has the characteristic appearance of two sets of parallel
threads or yarns-the yarn running along the length is called warp and the one
perpendicular is called weft.
The majority of low to medium strength woven geo synthetics are manufactured
from polypropylene which can be in the form of extruded tape, silt film, monofilament
or multifilament. Often a combination of yarn types is used in the warp and weft
directions to optimize the performance/cost. Higher permeability is obtained with
monofilament and multifilament than with flat construction only.
3.2 Non-woven
Non woven geo-synthetics can be manufactured from either short staple fibre or
continuous filament yarn. The fibers can be bonded together by adopting thermal,
chemical or mechanical techniques or a combination of techniques. The type of fibre
(staple or continuous) used has very little effect on the properties of the non – woven
geo synthetics. Non-woven geo-textiles are manufactured through a process of
mechanical interlocking or chemical or thermal bonding of fibres/filaments. Thermally
bonded non-wovens contain wide range of opening sizes and a typical thickness of
about 0.5-1 mm while chemically bonded non-wovens are comparatively thick usually
in the order of 3 mm. On the other hand mechanically bonded non-wovens have a
typical thickness in the range of 2-5 mm and also tend to be comparatively heavy
because a large quantity of polymer filament is required to provide sufficient number
of entangled filament cross wires for adequate bonding.
3.3 Knitted fabrics

Knitted geo-synthetics are manufactured using another process which is adopted from
the clothing textiles industry, namely that of knitting. In this process interlocking a
series of loops of yarn together is made. An example of a knitted fabric is illustrated in
figure. Only a very few knitted types are produced. All of the knitted geo-synthetics
are formed by using the knitting technique in conjunction with some other method of
geo-synthetics manufacture, such as weaving. Apart from these three main types of
geo-textiles, other geo-synthetics used are geo-nets, geo-grids, geo-cells, geo-
membranes, geo composites, etc. each having its own distinct features and used for
special applications.
4. Function of Geotextile in Drainage

In civil engineering, the need for drainage has long been recognized and has created
the need for filters to prevent in-situ soil from being washed into the drainage system.
Such wash in soil causes clogging of the drains and potential surface instability of land
adjacent to the drains. This refers to the ability of thick nonwoven geo-textile whose
three-dimensional structure provides an avenue for flow of water through the plane of
the geo-textile. Figure 6 also illustrates the transmissivity function of geo-textile. Here
the geo-textile promotes a lateral flow thereby dissipating the kinetic energy of the
capillary rise of ground water.
Figure 2: Geo-textile layer in sub-grade.
The use of geo-textiles to filter the soil and a more or less single size granular
material to transport water is increasingly seen as a technically and commercially
viable alternative to the conventional systems. Geo-textiles perform the filter
mechanism for drainages in earth dams, in roads and highways, in reservoirs, behind
retaining walls, deep drainage trenches and agriculture. When functioning as a drain, a
geo-textile acts as a conduit for the movement of liquids or gases in the plane of the
geo-textile. Examples are geo-textiles used as wick drains and blanket drains. The
relatively thick nonwoven geo-textiles are the products most commonly used.
Selection should be based on transmissivity, which is the capacity for in-plane flow.
Questions exist as to long term clogging potential of geo-textile drains. They are
known to be effective in short duration applications. Function of providing Geo-textile
with reference to drainage is to prevent soil particles to migrate and allowing passage
of water.
Geo-textile when used as drains, the water flows within the plane of Geo-textile i.e.
has high lateral permeability. Geo-textile should also have dimensional stability to
retain its thickness under pressure. An ideal Geo-textile should play the role by
removing free water from beneath the surface. It is observed that life of pavement
section is greatly influenced till the water remains under the structural section and
removal of water which depends on its drainage system. The use of Geo-textile has
resulted into changing the conventional procedure of using graded filters.
5. Advantages of using Geo-textile in Drainage

1. Eliminates the filter sand with dual media backfill.
2. Replaces well-graded lab analysis sand and gravel with less expansive non-
graded mix.
Application of Geotextiles in Pavement Drainage Systems 389
3. Eliminates the need for perforated pipe in some cases.

4. Cases where only sand backfill id available, Geo-textile can be used to wrap
the drainage pipe to act as a screening agent. Geo-textile results in preventing
sand entering the perforation in the pipe.
5. Trench excavation depth can be reduced using Geo-textile.
Figure 3: Use of fabrics in drainage.
6. Application of Geo-textile in Drainage

 Filter around trench drain and edge drain to prevent soil from migrating into
aggregates.
 Filters beneath pavement permeable bases, blanket drain and base courses.
 Drains for structure such as retaining wall and bridge abutment.
 Geo-textile wraps for slotted or joined drain and well pipes.
 Chimney and toe drains for earth dams and levees to provide seepage control.
7. Conclusion
Geo-textiles are widely used for drainage in earth and construction works. The
drainage function is defined as “The collecting and transporting of precipitation,
ground water and/or other fluids in the plane of the geo-textile”. In other words, it is
the ability of the geo-textile to drain fluids on its own, meaning that it is not part of a
drainage system, but is the drainage system itself. The drainage function is often
confused with the filtration function. When a geo-textile forms part of a drainage
system, where the geo-textile is used to separate a soil and a coarse-grained drainage
layer, the function is filtration.
Excess water is drained off the construction - not by passing through the Fibertex
Geo-textile as when used for filtration - but by flowing in the plane of the geo-textile
leading it away from the construction.
References
[1] Rankilor, P. R., Membranes in Ground Engineering, John Wiley and Sons,
New York, 1981.
[2] Abdullah, A. B. M., A Hand book of Geo-textiles, Particularly natural goe-
textiles from jute and other vegetable fibers, FAO-2000.
[3] Gregory, R. N., Barry, C. R., Geo-textiles in Transportation Applications,
Featured Short Course, 1998.

Application of Geotextiles in Pavement Drainage Systems: Dr. Umesh Sharma, Abhishek Kanaoungo and Ankita Khatri

Uploaded by

Copyright:

Available Formats

Application of Geotextiles in Pavement Drainage Systems: Dr. Umesh Sharma, Abhishek Kanaoungo and Ankita Khatri

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Application of Geotextiles in Pavement Drainage Systems: Dr. Umesh Sharma, Abhishek Kanaoungo and Ankita Khatri

Uploaded by

Copyright:

Available Formats

International Journal of Civil Engineering Research.

ISSN 2278-3652 Volume 5, Number 4 (2014), pp. 385-390

Application of Geotextiles in Pavement Drainage Systems

Dr. Umesh Sharmaa, Abhishek Kanaoungob and Ankita Khatric

Geo-textiles are the permeable fabrics which, when used in association

Keywords: Geo-textiles, pavement, drainage.

2. Important Characteristics of Geotextiles

2.1. Physical properties

2.2 Mechanical properties

2.3 Hydraulic properties

2.4 Endurance properties

Figure 1: Geo-textile used for drainage.

3.1 Woven fabrics

3.3 Knitted fabrics

4. Function of Geotextile in Drainage

Figure 2: Geo-textile layer in sub-grade.

5. Advantages of using Geo-textile in Drainage

3. Eliminates the need for perforated pipe in some cases.

Figure 3: Use of fabrics in drainage.

6. Application of Geo-textile in Drainage

You might also like