LCD/LED

TELEVISION

1st proof - 15-7-13

SANSUI COMBO - LED (1100098898) 13-7-13
Shri. Ganesh Lasane sir / Shri. Snehal Sir
 MESSAGE FROM THE VICE CHAIRMAN & CEO

Dear Customer,

It gives me great pleasure to welcome you to the SANSUI family.

Our sincere endeavour is to provide you with best quality products & service

support, which lay the foundation for a binding relationship with you. One that

stands the test of time to grow stronger with our every interaction.

At SANSUI, we have set ourselves a goal to continuously challenge ourselves

to contribute towards your happiness. That’s how with extensive research and

creativity we present a whole new range of products - designed with superior

technology in both picture and sound - so that nothing (else) sounds better.

Warm regards,

(Vice Chairman & CEO)

1. INTRODUCTION.......................................................................................... 2

2. WARNING AND SAFETY PRECAUTIONS................................................. 2

3. ANTENNA AND EXTERNAL EQUIPMENT CONNECTION........................ 3

4. NAMES AND FUNCTIONS OF CONTROLS ON SET................................. 4

5. NAMES AND FUNCTIONS OF CONTROLS ON REMOTE........................ 5

6. BATTERY INSTALLATION.......................................................................... 8

7. PICTURE MENU......................................................................................... 8

8. SOUND MENU............................................................................................ 9

9. CHANNEL MENU........................................................................................ 9

10. SETTING MENU.........................................................................................10

10.1. EASY CONNECT & DEVICE MENU INFORMATION..............................10

11. PARENTAL MENU....................................................................................... 11

12. MULTIMEDIA GUIDE BAR INFORMATION................................................12

13. MULTIMEDIA SUPPORT FORMATS..........................................................12

14. TECHNICAL SPECIFICATION....................................................................14

15. TROUBLESHOOTING................................................................................15

NOTE : Pictures and OSD shown in this User Guide Book are just for representation.
Actual product may look differ than representation.

Product disposal Guidelines:

For the purpose of recycling to facilitate effective utilization of resources, please
return this product to a nearby authorized collection center, registered dismantler,
recycler, service center when disposing of this product.
In case of further assistance, you may contact nearest authorized service center.
Or Please see the Company website for further information on collection centers etc.
Visit-http://www.sansui-india.com

( )
Thank you for choosing our product. You can use it as a color television or as a PC
monitor. To be able to make use of all application options, we recommend that you should
read this operating manual carefully and keep it somewhere where you have quick access
to it, if required.
Do not touch any parts in the set and do not make changes to any settings not described
in this operating manual.
The LCD/LED screen is a high-tech product consisting of more than 900000 control elements.
Any non-active red, blue or green spots that might appear on the screen occasionally have
no effect on the performance of the screen.

Cleaning :
For safety, remove the AC plug from the wall outlet before cleaning the set.
Clean the dust on set by wiping the screen and the cabinet with a soft, clean cloth. If the
screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners
or aerosol cleaners or liquid containing benzol, petroleum or a chemicals.
 ANTENNA CONNECTION: -
Connect Antenna cable to the ANT IN Socket on rear of the TV. For Good
operation of the set, good signal is required. In the strong signal area, an
AV OUT ANT IN ANT IN
AV OUT
indoor antenna could be used, otherwise an outdoor antenna should be used
Note: - The aerial cable should not be bundled to the power cord.

YPbPr L IN 1 R IN 1 V IN 1
L1in R1in V1 in COMPONENT (YCbCr/YPbPr) DVD INPUT: -
1. Connect the component outputs (YCbCr / YPbPr) of DVD player to the
component (YPbPr) input of the TV.
2. Connect audio outputs (L/R) of a DVD player to the audio input YPbPr.
3. Press the PLAY button on the DVD player.
CD/DVD Player
AV INPUT: - 1.Connect the composite VIDEO output of player to AV1.
AV INPUT 2. Connect audio outputs (L/R) of a player to the audio input AV in.
YPbPr INPUT
3. Press the PLAY button on the Player.

Note : Selecting a Source

Press TV/AV key on remote or SOURCE key on front panel keypad. A source OSD will appear to select a
source press OK/Right or Left key on the remote or VOL + key from front panel. Press TV/AV key or source
key repeatedly to change and select source. Up/Down key on the remote or CH+/- on front panel
can be used to change sources.

VGA
VGA INPUT: - 1. Connect the VGA cable from the monitor
HDMI
Audio in
output socket of the PC to the VGA IN socket of the TV.
2. Connect the audio cable from the PC to the VGA Audio
IN socket of the set.
3. Switch on the PC and PC screen appears on the TV set.
The set can be operated as PC monitor.
Note: - A. If the set is cold, there may be a small flicker
when the set is switched ON. This is normal, there is
VGA INPUT nothing wrong with the set.
HDMI INPUT
B. Some dot defects may appear on the screen, like Red/
Green/Blue spots. However, this will have no impact or
effect on the TV/Monitor performance.
HDMI INPUT: - 1. Connect the HDMI(High Definition Multimedia Interface) cable from the DVD HDMI
Output socket to the HDMI socket of the TV.
2. Set the HDMI mode in DVD Player (Refer User Manual of DVD Player).
Note: - TV can receive the Video and Audio signal simultaneously by using HDMI cable.

R L VIDEO
AV OUT: - This connection is used for connecting the TV/AV,
signal from TV SET 1 to TV SET 2.

USB MULTIMEDIA: - Connect / Insert standard USB and select

HDMI Multimedia source on source OSD by pressing TV/AV key.
Press OK / Right key on remote, connected USB is listed,
press OK to enter in selected USB Multimedia. Similarly front
AV OUT ANT IN
panel keys CH+/- and VOL+ can be operated as Up/Down
and OK/Right keys on remote respectively.

NOTE: - CH +/CH- keys on Remote are represented by CH+/CH- on the TV set.

VOL+/VOL- keys on remote are represented by VOL+/VOL- on the TV set.
4. NAMES AND FUNCTION OF CONTROLS ON SET

A) Front Panel Control/Keys (Optional)

1
2
3
4
5
6
7
8
9

9 8 9

1) VOL+ 6) TV/AV 11) USB 16) L1

2) VOL- 7) Stand By 12) HDMI 17) R1
3) CH+_ 8) LED INDICATOR 13) VGA Audio In 18) V1
4) CH- 9) IR SENSOR 14) VGA IN 19) AV Out
5) MENU 10) AC Power in 15) YPbPr In 20) ANT In

10

YPbPr

11 12 13 14 15 16 17 18 19 20

Note :
1) Above Sketches are just representation. Actual TV set may look differ than these sketches.
2) When press a key on TV key pad i.e. keys from 1 to 7, a key press indicator will appear on the
TV screen. When a key is pressed, the indicator of that key is highlighted. This is to indicate
the function of the key you are pressing. (This is an optional feature).
 E-SAVER PLAY/PAUSE POWER

TXT INDEX CANCEL

1 2 3
ECO GUIDE INFO RETURN
4 5 6
MIX HOLD REVEAL

DISPLAY REPEAT FREEZE ANGLE 7 8 9

PICTURE SOUND
0
SLEEP
CH

MUTE

VOL

CH VOL

PIP/POP PIP-POS PIP-ZOOM SWAP

GUIDE INFO RETURN ECO

TXT INDEX CANCEL

REPEAT FREEZE ANGLE CC

MIX HOLD REVEAL SUPAG

PICTURE SOUND
I/II
QV ENERGY
METER
SCENE
SELECT
MTS VCHIP

ZOOM TV/AV MENU

(OPTIONAL) (OPTIONAL) (OPTIONAL)

NOTE : This is for representation actual remote and ley printing may differ.

5
 POWER
Turns TV into STANDBY ON / OFF
DISPLAY MUTE DISPLAY: - Displays present source information with details of input signal connected.
MUTE: - Turns sound OFF or ON.

SOURCE SELECTION (TV/AV)

TV/AV
Press TV/AV key on remote or SOURCE key on front panel keypad, a source OSD
will appear to select a source press OK/Right key on the remote or VOL + key from
front panel to select the source. Up/Down key on the remote or CH+/- on front panel
can be used to navigate in source list.
SLEEP SLEEP:- "Sleep timer max time is 120 min in steps of 5,10, 30, 60,120 minutes.
NOTE:- Sleep Timer is deactivated when set is switch to stand by or mains power supply is switched Off.
PICTURE SOUND PICTURE: - Recalls/changes preset picture settings.
SOUND: - Recalls/changes preset sound settings.

This digit is also used for go to time in multimedia in guide Bar.

1 2 3 4 Selects program number 1 - 200 directly by using direct digit keys.
- To select 1 digit program number press desired program number & wait for few
5 6 7 8 seconds selected program number will appears on screen
- To select 2 digit or 3 digit program number press 1st, 2nd, or 3rd digit within
9 0 2 sec. after pressing 1 & 2 digit respectively.
- To enter password to lock or unlock channel and to set New Password.
- To enter Time in Timer Menu and in Multimedia mode in Guide bar.
- Will operate only in TV source for Channel change
QUICK VIEW(Q. V.):- Selects to previously viewed channel in TV Source.
QV ZOOM
ZOOM:- Zoom is for adjusting aspect ratio such as Auto/16:9/4:3/Zoom1/Zoom2 in
RF/AV1/ AV2/YPbPr/HDMI sources and 16:9/4:3 in VGA sources & Auto/16:9/4:3 in Multimedia mode.
CH+/CH– :- Navigate Up/Down the RF channel. & to turn ON TV set from Standby.
CH VOL
VOL+/VOL– :- To increase / decrease the volume level in all sources.
- Navigates vertically up/down through the Menu/Sub menu.
- To enter characters / numbers in program name parameter.
- Navigates Horizontally Right/Left through the Menu/Sub menu.
- To enter in Menu/Sub Menus.
- To navigate the letters in program name parameter.
- To set the time.
- Select source by Right arrow key.
- Increase/Decrease the value of selected items and to set the
parameter On/Off.
OK:- - To enter in Sub menu.
- Enter to edit program name parameter.
- Select source.

MENU MENU: - To Select menu OSD window and to Return from Existing menu OSD.
PIP/POP PIP-POS PIP/POP: - This key/feature is Not Applicable.
PIP-POS: - This key/feature is Not Applicable.
PIP-ZOOM SWAP PIP-ZOOM: - This key/feature is Not Applicable.
SWAP: - This key/feature is Not Applicable.

PREV PREV (PREVIOUS): - PREV key is used to select the previous track/item in multimedia
source and in Easy Connect feature in HDMI source.
FR FR (FAST REVERSE): - FR key is used for backward the playing track / item by
the speed of (X2, X4, X8, X16)
FF FF (FAST FORWARD): - FF key is used for forward the playing track/item by the
the speed of (X2, X4, X8, X16)
NEXT NEXT: - NEXT key is used to select next track/item for play in multimedia source.
STOP: - Press this key to stop the playback and press Play to resume the playback
STOP again. In Easy connect in HDMI source, select the last viewed file and then press Play to
resume. To view images as thumbnail this keys can be used.

6
 USB / PIP RELATED TELETEXT RELATED
KEYS (OPTIONAL) KEYS (OPTIONAL)

PLAY/PAUSE: - Press this keys to play or pause TXT: -Used to enter "Teletext
PLAY/PAUSE track/item in multimedia source & in Easy Connect
feature. mode" (analog and digital). In
analog mode press repeatedly to
GUIDE: - When playing the multimedia file and in Easy access-full page text picture and
GUIDE TXT Connect mode in HDMI source, press [GUIDE] key. The text, text and text and off.
task bar will show for guiding the Multimedia and Easy
connect operation in HDMI source.
INDEX: - Used to get to text a-z
INFO INDEX INFO: - Use this key to view the details of the index page.
Multimedia file you are playing Music/Photo/Video. This
will display the information of that file in separate window. CANCEL:- Analog TV text option
To exit from this Info Window, press OK key on CANCEL used to temporarily display TV
RETURN CANCEL icon. picture until text page refreshes,
gives notification of content
RETURN:- Use this key to return to main multimedia change on screen.
ECO menu while playing a track/item.

ECO: - This key provides the different power savings MIX: - Mix. TV picture and text as
modes. The current mode is displayed with ecovision an overly (analog only)
symbol on the screen, in audio only mode display is off
REPEAT MIX HOLD: - Used to freeze the sub
and only audio is on. Press Menu key to exit audio only
mode. page on screen, press again to
release (only used in analog text
REPEAT: - Press REPEAT on remote ,then in guide bar mode).
menu the symbol of none, one ,all will show one after
FREEZE HOLD another for repeat sequences. While playing image/
video the repeat options are displayed on the screen and REVEAL:- Use this key to display
can be changed by pressing this key. /height information in certain text
ANGLE REVEAL
pages-quiz game solution.
CC SUPAG
FREEZE: - This key is used to Freeze the moving
picture. To exit again press Freeze key. Not effective in CC: - Display the consumer
multimedia. electronics control menu.
ANGLE: - This key is used for displaying the images in SUPAG: -This key can be used for
Different angles 90/180/270/360 degree, when images
subpage index display.
are viewed in multimedia.
I/II: -If received signal is NICAM, by
pressing this key sound can be
(RED KEY) FAVORITE: - RED KEY, GREEN KEY, YELLOW KEY,
selected stereo/mono, if received
BLUE KEY are the favorite keys used for selecting
(GREEN KEY) favorite channels for four users in TV source. Use this
signal is NICAM dual signal sound
key to set/clear a channel from favourite list.
can be selected dual I/ dual/II and
(YELLOW KEY) mono.
MTS: -1)Use this key to enable
(BLUE KEY) /disable BTSC sound (mono/streo)
for the current program being
watched(This Feature is Optional)
ENERGY METER / E-SAVER: - Use this key to VCHIP:- VCHIP function is not
available in India.
ENERGY
METER display the energy saving of the TV. The TELETEXT:-TEXT, MIX ,HOLD,
energy meter is displayed on the screen with CANCEL,INDEX REVEAL,
the current energy saving. Not effective in SUPAG ,RED, GREEN, BLUE,
multimedia source. YELLOW are the key’s for teletext
SCENE function.
SELECT SCENE SELECT:- This key/feature is Not
Applicable. Note : Teletext, I/II, MTS, VCHIP
is not available in India.

I/II VCHIP
MTS

NOTE: 1.) Teletext is not available in india.

2.) I/II is not available in india.
3.) Depending up on remote some key may not be available.

7
 UM-4”AAA”
UM-4”AAA”

7. PICTURE MENU
This function is used to select the preset picture settings. (User/Hi-Bright/Vivid
Picture mode /Sports/Cinema)
Contrast/ These settings are used to adjust the Contrast(0-100), Brightness(0-100),Saturation
Brightness/ (0-100), Sharpness(0-100), and Hue(0-100) values for fine picture adjustment.
Saturation/ NOTE: Hue is enabled for NTSC channels only.
Sharpness/Hue
PICTURE

Color Temp. Use this option to select and change color temperature (Normal/Warm/Cool).
Black Back This function is used to ON/OFF the black back in no Signal condition.
CTI This improves color and sharpness of the picture.
The DNR (Off/Low/Middle/High) reduce the noise by applying
DNR temporal and spatial noise reduction filters to Video data.
Advance
Adaptive
Picture Adjust Luma Control This function improves Adaptive Luminance (On/Off).
Color Improve The Color improve (On/Off) adjust the color.
Auto setting allows the PC screen of TV to self adjust. This automatically sets the H-position
Auto Setting
GEOMETRIC

V- position, Phase and clock.

H Position If picture is not Ok with auto setting then adjust Horizontal position(0-100)/Vertical position
V Position (0-100) manually to adjust the desired picture settings.

Manual Clock Adjust the phase (0-31) and clock(0-100) to remove or reduce picture noise. If noise
Phase appears adjust frequency by clock for fine adjustments.
Note : 1) The Geometric menu will be enabled for VGA source only. TV menu is disabled for
VGA Source.

8
 8. SOUND MENU
Audio Mode This function is used to select the preset sound modes (User, Standard, Music, Speech).
Equalizer The Equilizer 120Hz, 500Hz, 1.5KHz, 5KHz, 10KHz, (0-100) can be changed by other user.
Bass The bass function is used to vary the bass level from 0 - 100.
SOUND

Treble The treble function is used to vary the treble level from 0 - 100.
Balance User can select the left/right speaker intensity by changing balance (-50 - +50).
Volume The main speaker volume can be adjusted by varying this volume bar (0-100).
Speaker The main speaker can be made On/Off by this option.
AVL This function is used to for automatic adjustment of volume level(On/Off).
AV Out This parameter is Fix and Variable. In Fix mode, the AV out volume is 100 by default. In Variable
AV Out Volume mode, the AVout volume can be varied from 0-100 with navigation keys.

9. CHANNEL MENU
Program No. Displays the current Program number
Change the color system (AUTO/PAL/SECAM) setting if picture is not reproduced properly.
Color System
Note : For INDIA Color system is AUTO or PAL
Change the sound system (BG/I/DK) setting if sound is not reproduced properly.
Sound System Note : For INDIA Sound system is BG.
Auto Search Press right arrow key or OK key to start searching & tuning all the available channels.
Current Displays the current displayed channel. Press Left/Right navigation keys
Channel of remote to change the program no.
Manual Search Store To Displays channel no. to store the current program. Press Left/Right navigation keys of
Channel remote to change the program no.
System Displays the Sound system of the currect tuned program.
Press Left/Right Navigation keys of remote to search the program. Also the program
Search
can be selected by directly entering the Program freq. with remote no. keys.
CHANNEL

Select this option for Fine tunning the channel with Left right navigation keys
Fine Tune
at which either Picture or Sound is not clear even after Auto Searching.
Frequency Displays the frequency of the current Program (channel).
User can edit the programs by Delete, Rename, Move, Skip, operation
1.To delete, Navigate to a channel to delete, press1,the channel will be deleted
2.To Rename the channel name press 2 on this option and use Up/Down keys to select
letters and Left/Right key to navigate between the characters of program name
3.To Move a channel to other program location, Press digit “3”on remote and navigate
to list for location to place this channel. Again press “3” to fix location for this channel.
4. To skip any program, press digit key 4 on that channel, then the channel will be marked in the
list. When come out of menu and navigate channels, then the channel will not appear
Program
Favorite
Edit Favorite channels group can be selected with (Red,Green,Yellow,Blue) keys on remote. Navigate
to a channel to be included in favorite list, press a color key, the color box same as key pressed
appear in front of channel and the channel is included in list to remove the channel from favorite list
press same key again, exit menu and press color key, the favorite OSD appear with selected channels
to change favorite channel keep pressing color key, channel will be changed. Four favorite groups
can be created with four color keys and same channel can be selected in multiple favorites.
(Favorite feature is optional).
Note : 1) Channel menu will be disabled in other source accept TV source & when Parental-
Disable Search option in Hotel Mode is ON.

9
 10. SETTING MENU

Input Select this option for display current input source and source can be changed with
Source Up/Down navigation keys.
Back The backlight value can be varied (0-10) This function is used to adjust brightness
Light level of panel (This feature is optional).
Eco TV is in Normal state when made on. To save the power consumption, select power saving modes as
Power Saving low/Mid/High/Audio only. In Audio Only mode only audio is On and Picture
Vision is off. In Audio only mode, all audio controls as Vol+/-, & mute keys on remote will
operate to control audio. Press menu key to exit audio only mode.
Switch User can make this Switch Off/On to enable the switch on music. The music will be played
On Music while standby Off/On. (This Feature is Optional).
SETTING

Shop This feature is used to ON/OFF the Shop mode feature. This displays the TV features
mode with description. This is for use on Shop floor only. (This feature is Optional)
This feature operates only in HDMI source. If a CEC compliant device like Home theater or
DVD player is connected to TV in HDMI mode, then the Player controls can be operated through
TV remote. Below are the sub Menu in Easy connect.(Easy Connect feature is optional).
Easy Press Left/Right navigation keys of TV remote to Switch On/Off the Easy Connect feature.
Connect When make this ON, then all other parameters become active.
Easy Auto Press Left/Right Navigation keys for ON/OFF of this feature. If make LCD set off, then
Connect the connected CEC device go to stand by. If CEC device is made ON then LCD also
Turn Off
becomes ON from Stand by.
Device Press OK key of TV remote to search the Devices connected in HDMI source It will
Search show the no. of connected devices.
Device Press Ok key of TV remote on this option, then it will show the list of devices connected
List with the LCD in HDMI source.
Device When press Ok key of TV remote to operate this feature, then the main Menu disappears
Menu and the Easy Connect Guide Menu bar is displayed on screen. The Guide bar can also
be accessed with Guide key of Remote.
The details of Easy Connect Guide menu are on next Page.
Software This is for LCD TV Software update. (For Service only)
Update
Reset Select this option to reset all Feature, Audio, Video parameters to Default value

10.1. EASY CONNECT DEVICE MENU INFORMATION

Play Select this option with OK key of TV Remote to PLAY file in list of connected player
Select this option with Navigation key and OK key of TV remote. This is used to PAUSE
Pause the running file in connected device.
Select this option with Navigation key and OK key of TV remote. This is used to fast
FR
Rewind the running file of connected player.
Select this option with Navigation key and OK key of TV remote. This is used to Fast
FF
Forward the running file of connected player.
Select this option with Navigation key and OK key of TV remote. This is used to
Prev. select Previous file in Player list.
Select this option with Navigation key and OK key of TV remote. This is used to
Next. select Previous file in Player list.
Select this option with Navigation key when press OK key of TV remote then It will
Stop
stop the running file in Player and will return to main menu of the connected player.
By using this option, the connected player can be made OFF to stand by. When the
Power the player is switched OFF, the TV will return to last viewed source. To switch ON the
player again, go to HDMI source and goto Guide bar menu and again select Power option.

10
 Below options are present on second page of Guide bar. Select with remote navigation
Home key. When select this option with TV remote OK key, then the running media file will
stop and it will return to Player Home menu.
This key works to select the Player menu functions and files etc. Press TV remote
OK Select OK key to operate this function.

These functions are used to navigate in the Player menu and player functions in Up/Down
Up Down and Left/Right directions. These controls work same as TV remote navigation keys.

Left Right
Setup When select this function with TV navigation and OK keys, then it will display the
Setup menu of the connected Player.
Return This function is used to go to previous menu or screen of the Player, when selected
with TV remote OK key.

Note: -
1) The Easy connect guide menu can be accessed from Settings menu as well as Guide Key of TV remote.
2) The above functions may work different depending on player connected with TV.
3) If connected CEC compatible device is not functioning in Easy connect, then kindly check the device settings.

11. PARENTAL MENU

PARENTAL CONTROL

Parent Lock Make the parental switch On to lock/unlock the sources (TV/AV1/YPbPr/HDMI/VGA/
Switch Multimedia)/channels (1-200).
Change Select this option to change the password (default - 0000) Enter new password
Password and confirm the same.
Channel Lock Press DIGIT KEY 2 key to Lock/Unlock the channels (01-200).
Clear All Select this option to reset all Parental options to default value.

Hotel Mode Make this switch On to Activate the Hotel Mode options selected by user. When
Switch Switch is Off the Hotel Mode, its options will not Operate.
Change Select this option to change the password (default - 0000) Enter new password
HOTEL MODE CONTROL

Password and confirm the same.

OSD Display Making this option On, the Display OSD will not appear by pressing Display
Disable Key on remote.
Key Lock Select this option On, panel keys will not operate.
Disable Search Making this option On, the search options/TV menu will be disabled for user.
Max Volume The main volume is limited by setting MAX volume (0-100), User cannot
increase the main volume greater than MAX volume selected.
Power On Power On Select the power on source (TV/AV1/YPbPr/HDMI/VGA/Multimedia)
Set Source after the TV ON, the power on source will be same as specified here.
Power On Select the power on source (1-200), after the TV ON, the power
Channel on source will be same as specified here.
Power On By setting the power on volume (0-100), this volume will
Volume be set after set gets ON.
Clear All Select this option to reset all Hotel Mode options to default.

Note :
1) Use Left/Right keys on the remote change the option and up/down to navigate.
2) Press OK/Right key on remote to enter into the submenu.
3) Press CH+/- key on front panel to navigate, Vol+/- key to enter/back and to change option.
4) Default password is "0000" for parental and hotel mode.
5) If any of your CEC compatible device is not connected in Easy connect of LCDTV/LEDTV, thenPlease check your device
settings.

11
 12.MULTIMEDIA GUIDE BAR INFORMATION
Play/Pause Use this option to Pause the running Media. Again Press the same key to resume/Play the file.

FF Use this option to Fast Forward FF or Fast Rewind FR the running file.
FR
PREV NEXT Use this option to select Next or Previous Media file in your Play list.
VIDEO / MUSIC / PHOTO / TEXT

STOP Use this option to Stop the running Media file. If press OK on this icon, then it will return
to your play list from current playing File.
Use this option to Repeat the Media files with options as None/One/All files to repeat.
All Press OK key to operate. Also can use Repeat key on remote.
Use this option to set the selection points in Media file. Press OK key and select Point
AB A again Press OK key and select Point B. Now the Video between A and B will repeat
Set A
again and again. To stop repetitions again Press OK key. Applicable in Video files only.
By pressing OK key on this Icon, will display all Media files present in that particular
Playlist
Folder i.e. Audio or Video or Photo.
By pressing OK key on this Icon, it will display the Information about the Media file being
INFO
played. To close this window press Down Navigation Key till Close icon and press OK key on remote
This option is used to slow Forward the Video file in steps of 2X/4X/8X/16X. If select, then
Slow the audio will not come. After 16X, the normal Play will resume. Applicable in Video.
This Option is used to move the Video file in steps. For normal operation, again press
Step Play Key. Applicable in Video files.
By selecting this option, can jump at any timing of the Video i.e. the Video will start
Goto Time from that time of total Video time .Applicable in Video and Music files.
Zoom IN / OUT This is used to Zoom in or out the media file. Applicable for Images only. For Video use
Zoom key on remote.
This option is used to move the position of the Image file. This will be used if Image
Move file is Zoomed into big size. Applicable for Image files only..
Rotate This option is used to Rotate the Image file clockwise in 90/180/270/360 deg. Used for
Image files Only
This is a short cut for Music filed to play in background with Image files running on screen.
Music To operate this, first go to Music folder, then select the Music files to be played by OK
key. then go to Photo folder. play Photos. Then goto Music Icon and press OK key.
Then the Music will start playing in background of Images. There is no control on background
music files. Applicable for Photo folder only.
Note: - 1.) Guide bar will be present permanently in Music Folder with Play list. To exit from this press Return key on remote.
2.) To View Guide bar in Video and Image files, press Guide key on Remote.

13.MULTIMEDIA FORMAT SUPPORT

File Type File Format File suffix
Photo: JPEG\ BMP\ PNG .jpg\ .bmp\ .png
MPEG1\ MPEG2\ MPEG4\ RM\ RMVB\ .avi\.mpg\.mpeg\.dat\.rm\.mp4\.ts\.trp\
Video: MJPEG\FLV\ H.264 .asf\ flv
Audio WMA\ Mp3 .wma\ .mp3

Image Formats Details

File Format Resolution Compressed Format Support Range
Progressive JPEG Only Support 1024x768
JPEG 15360X8640 Baseline(Standard) Support
Baseline(Optimize) Support
Single Color Support
16 Color Support
256 Color Support
BMP 9600X6400
16 Bit Support
24 Bit Support
32 Bit Support
Progressive Support
PNG 9600X6400
Interlaced Only Support 1200x800

12
 Audio Formats Details
File Format Sampling Baud Rate Audio Channel
WMA 8K~48KHz 32K~320Kbps Mono, Stereo
Mp3 32K~48KHz 32K~320Kbps Mono, Stereo
Mp4 (AAC) 8K~48KHz 32K~320Kbps Mono, Stereo

Video Formats Details

File Format Support Suffix Internal Encoder Resolution Baud Rate
MPEG1 .DAT/.MPG/.MPEG 1920x1080P @ 30P Max 20Mbps
MPEG2 .MPG 1920x1080P @ 30P Max 20Mbps
MPEG4 .AVI/.MP4 DIVX,XVID 1920x1080P @ 30P Max 20Mbps
RM\RMVB .RM/.RMVB RV8, RV9, RV10 1920x1080P @ 30P Max 10Mbps
MKV .MKV/.MOV MPEG1,2,4 1920x1080P @ 30P Max 20Mbps
MJPEG .AVI 640x480P @ 30P Max 10Mbps

DivX .DIVX/.AVI MPEG, DIVX, H.264 1920x1080P @ 30P Max 20Mbps

H.264 .MKV/.MOV H.264 1920x1080P @ 30P Max 20Mbps
FLV .FLV H.264 1920x1080P @ 30P Max 20Mbps
VC1 .ASF VC-1 1920x1080P @ 30P Max 20Mbps
Hard Disk Drive3 Support: -
You can also access below type of Hard Disk with existing USB port of TV set
Format: - FAT16, FAT32, NTFS. Capacity: - 500GB
Note :
1. The multimedia features/functions may vary from file to file depending on relative information present in the file.
2. If can't detect the connected device, it would be caused by connected device driver not by TV failure.
3. USB port of device provides 5V & max current 500mA. Because port specs adopted by certain storage
device is different from that of standard USB, so it may affect the correct identifications.
4. The reading speed will be variable due to different connected devices & different storage capacities.
5. SANSUI is not responsible if USB device is not supported, nor it is responsible for damage or loss of data.
6. Due to difference of equipment & storage capacity the time need to read information also different. The
speed of reading information may slow down temporarily, note that this is not breakdown of this unit.
7. When system is executing your last operation , please do not press function keys continuously, otherwise
it will affect processing speed of system.
8. SANSUI uses the best of the display panels. However there may be bright dots visible, which is not
a defect and does not deteriorate the product performance, viewing and Reliability.

Resolution support :
YPbPr mode 480i (60Hz), 480p (60Hz), 576i(50Hz), 576p(50Hz), 720p,(50Hz, 60Hz),1080i, (50hz, 60Hz)
VGA mode 640x480(60Hz,72Hz,75Hz), 800x600(56Hz,60Hz,72Hz,75Hz),1024x768(60Hz,70Hz,75Hz)
1280x1024(60Hz),1280x768(60Hz),1600x1200 (60Hz)
HDMI 480i(60Hz), 480P (60Hz), 576i (50Hz), 576p (50Hz) 720p (60Hz), 1080i(50Hz,60Hz),
1080P (50Hz,60Hz)
Note: - If abnormal picture is observed on screen make power Off and On.
- The set might be operate abnormally if a non standard video format is selected.

13
 NOTE

conditions.
SCREEN SIZE 19.5” HD LED 22” FHD LED 23” HD LED 24” FHD LED 32” HD LED

LCD/LED Type 47cm LED 54.68cm LED 58.42cm LED 60.97cm LED 81cm LED

Display Resolution 1600 X 900 1920 X 1080 1366 X 768 1920 X 1080 1366 X 768

Viewing Angle 170(H)x170(V) 170(H)x170(V) 178(H)x178(V) 178(H)x178(V) 178(H)x178(V)

Power Consumption 35W 40W 35W 45W 50W
(Avg.)
Audio Output (RMS) 8W x 2

14
PAL BG/I/DK and NTSC(3.58/4.43) [NTSC- in playback only]

details please contact service provider.

VHF-2-12; UHF21-69; CATV (X~Z+2,S1~S41)
14 TECHNICAL SPECIFICATIONS

Power Supply AC 110-240V~50/60Hz

Antenna I/p
Impedance

1) Design and specifications are subject to change without prior notice.

2) Stand assembly and Wall Mounting assembly are optional. For more

3) Power consumption mentioned is average with standard picture/sound

15. TROUBLESHOOTING

Manually trail to adjust HV position.

Auto Adjust, try to adjust clock manually.

15
A
B
C
D
SERVICE CELL, VIL CAMPUS,
15km STONE, AURANGABAD -PAITHAN ROAD,
CHITEGAON, TALUKA PAITHAN,
DISTRICT AURANGABAD - 431 105
PHONE NO. : (02431) - 329271, 329783, 251598
E MAIL : [email protected]
BRANCH OFFICES
 SANSUI COMBO-LED (1100098898)
Rev.00 Rajmudra

Marketed by - KAIL LIMITED,

Auto Cars Compound, Adalat Road, Aurangabad,
Maharashtra, 431005, INDIA.