UNI D Solenoid Valve

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

2-WAY SOLENOID VALVE UW SERIES

2-WAY SOLENOID VALVE UW


SERIES

MODEL: 2/2 MAXIMUM REGUALR


TYPE. NORMALLY CLOSED
SOLENOID VALVE.
BORE: 3/8"~2" SCREWED END.
FLUID: WATER, AIR.

SPECIFICATION and CHARACTER:


1. UWF series is direct multiplex-drive, connected to diaphragm, open
type.
2. Valve body made of forged brass or cast bronze.
3. UW can be operated directly without pressure difference.
4. Standard voltage: AC110V/AC220V/DC24V(50/60Hz)
5. AC Voltage tolerance: ±10%. DC voltage tolerance: ±1%.
6. Screwed end to: BSPT, NPT or BSP.
7. Other special AC/DC voltages can be made to client's order.
8. In case use for special fluid, please state the type of fluid with your
order (such as gas, vacuum, diesel oil, gasoline).
9. In case fluid temperature must be range of 130℃, your may order
Viton, Silicon materials.
MAX. OPERATING
Size
CONNEC PRESSURE
ORIFICE FLUID (mm) weight
MODEL TIONPIPE Cv DIFF.KGf/c㎡
MM TEMP.℃ (kg)
SIZE LIGHT
AIR WATER L H D
OIL
-5℃
UW-10 3/8" 4.5 15mm 0-7 0-5 0-5 70 100 50 0.9
~80℃
-5℃
UW-15 1/2" 4.5 15mm 0-7 0-5 70 100 50 0.9
~80℃ 0-5
-5℃
UW-20 3/4" 8.6 20mm 0-7 0-5 0-5 73 102 50 1.0
~80℃
-5℃
UW-25 1" 12 25mm 0-7 0-5 0-5 93 106 50 1.8
~80℃
-5℃
UW-35 1-1/4" 24 35mm 0-7 0-5 0-5 125 140 58 3.2
~80℃
-5℃
UW-40 1-1/2" 28 40mm 0-7 0-5 0-5 125 140 58 3.5
~80℃
-5℃
UW-50 2" 48 40mm 0-7 0-5 0-5 167 170 58 5.4
~80℃
THE PRESSURE RATINGS INDICTED ABOVE ARE BASED ON
AC110V/220V. THE MAXIMUM PRESSURE MAY VERY IN CASE ON
DC/AC24V.
SPECIAL ORDER: AC380V, 415V, 440V, DC12V.
2-WAY SOLENOID VALVE UW-
NO SERIES

MODEL: 2/2 MAXIMUM REGUALR


TYPE. NORMALLY OPEN SOLENOID
VALVE.
BORE: 3/8"~2" SCREWED END.
FLUID: WATER, AIR.

SPECIFICATION and CHARACTER:


1. UW-NO series is direct multiplex-drive, connected to diaphragm, close type.
2. Valve body made of forged brass or cast bronze.

CONNEC MAX. OPERATING Size


FLUID PRESSURE DIFF.KGf/c㎡ (mm)
MODE TIONPIP ORIFIC weight
Cv TEMP.
L E E MM VACUU (kg)
℃ WATER AIR GAS L H D
SIZE M
UW-10- 4. -5℃
3/8" 15mm 0-5 0-7 70 126 58 1.1
NO 5 ~80℃
UW-15- 4. -5℃
1/2" 15mm 0-5 0-7 70 130 58 1.1
NO 5 ~80℃
UW-20- 8. -5℃
3/4" 20mm 0-5 0-7 73 135 58 1.2
NO 6 ~80℃
UW-25- -5℃
1" 12 25mm 0-5 0-7 93 106 58 1.8
NO ~80℃
UW-35- -5℃
1-1/4" 24 35mm 0-5 0-7 125 158 58 3.2
NO ~80℃
UW-40- -5℃
1-1/2" 28 40mm 0-5 0-7 125 158 58 3.5
NO ~80℃
UW-50- -5℃
2" 48 50mm 0-5 0-7 167 188 58 5.4
NO ~80℃
3. UW-NO can be operated directly without pressure difference.
4. Standard voltage: AC110V/AC220V/DC24V(50/60Hz)
5. AC Voltage tolerance: ±10%. DC voltage tolerance: ±1%.
6. Screwed end to: BSPT, NPT or BSP.
7. Other special AC/DC voltages can be made to client's order.
8. In case use for special fluid, please state the type of fluid with your order (such as
gas, vacuum, diesel oil, gasoline).
9. In case fluid temperature must be range of 130℃, your may order Viton, Silicon
materials.
10. 2 Way Normally open solenoid valve
11. Type UWNO is normally closed, can direct operation without pressure
THE PRESSURE RATINGS INDICTED ABOVE ARE BASED ON
AC110V/220V. THE MAXIMUM PRESSURE MAY VERY IN CASE ON
DC/AC24V.
SPECIAL ORDER: AC380V, 415V, 440V, DC12V.

You might also like