Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Accelerator Control System: Section

    Uploaded by

    Abbode Horani
    1) The document provides removal and installation instructions for the accelerator control system on a 2006 Sentra. It describes disconnecting the accelerator pedal position sensor connector and removing three nuts to remove the accelerator pedal assembly. 2) Specifications for the accelerator pedal travel are provided, stating the acceptable range is 52.6-58.2mm. 3) Cautions are described to avoid impact or water damage to the accelerator pedal assembly during removal and handling, and to perform an accelerator pedal released position learning procedure after reconnecting the position sensor connector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Accelerator Control System: Section

    Uploaded by

    Abbode Horani
    49 views4 pages
    1) The document provides removal and installation instructions for the accelerator control system on a 2006 Sentra. It describes disconnecting the accelerator pedal position sensor connector and removing three nuts to remove the accelerator pedal assembly. 2) Specifications for the accelerator pedal travel are provided, stating the acceptable range is 52.6-58.2mm. 3) Cautions are described to avoid impact or water damage to the accelerator pedal assembly during removal and handling, and to perform an accelerator pedal released position learning procedure after reconnecting the position sensor connector.

    Original Description:

    engine

    Original Title

    nissan

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document provides removal and installation instructions for the accelerator control system on a 2006 Sentra. It describes disconnecting the accelerator pedal position sensor connector and removing three nuts to remove the accelerator pedal assembly. 2) Specifications for the accelerator pedal travel are provided, stating the acceptable range is 52.6-58.2mm. 3) Cautions are described to avoid impact or water damage to the accelerator pedal assembly during removal and handling, and to perform an accelerator pedal released position learning procedure after reconnecting the position sensor connector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views4 pages

    Accelerator Control System: Section

    Uploaded by

    Abbode Horani
    1) The document provides removal and installation instructions for the accelerator control system on a 2006 Sentra. It describes disconnecting the accelerator pedal position sensor connector and removing three nuts to remove the accelerator pedal assembly. 2) Specifications for the accelerator pedal travel are provided, stating the acceptable range is 52.6-58.2mm. 3) Cautions are described to avoid impact or water damage to the accelerator pedal assembly during removal and handling, and to perform an accelerator pedal released position learning procedure after reconnecting the position sensor connector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    B ENGINE

    ACCELERATOR CONTROL SYSTEM


    SECTION ACC ACC

    E
    CONTENTS
    ACCELERATOR CONTROL SYSTEM ...................... 2 SERVICE DATA AND SPECIFICATIONS (SDS) ........ 3 F
    Removal and Installation .......................................... 2 Accelerator Control ................................................... 3
    REMOVAL ............................................................. 2 PEDAL TRAVEL .................................................... 3
    INSTALLATION ..................................................... 2 G

    Revision: December 2006 ACC-1 2006 Sentra


    ACCELERATOR CONTROL SYSTEM

    ACCELERATOR CONTROL SYSTEM PFP:18005

    Removal and Installation EBS00DTP

    REMOVAL
    1. Disconnect the accelerator pedal position sensor electrical con-
    nector.
    a. Pull the connector lock back to unlock the connector from the
    accelerator pedal position sensor.
    b. Pull up on the connector to disconnect it from the accelerator
    pedal position sensor.

    LBIA0333E

    2. Remove the two upper and one lower accelerator pedal assem-
    bly nuts.

    WBIA0520E

    3. Remove the accelerator pedal assembly.


    ● For electrical inspection of the accelerator pedal position sensor. Refer to EC-514, "DTC P2122, P2123
    APP SENSOR" and EC-521, "DTC P2127, P2128 APP SENSOR" (QG18DE) or EC-1110, "DTC
    P2122, P2123 APP SENSOR" and EC-1117, "DTC P2127, P2128 APP SENSOR" (QR25DE).
    CAUTION:
    ● Do not disassemble the accelerator pedal assembly. Do not remove the accelerator pedal posi-
    tion sensor from the accelerator pedal assembly.
    ● Avoid impact from dropping the accelerator pedal assembly during handling.

    ● Keep the accelerator pedal assembly away from water.

    INSTALLATION
    Installation is in the reverse order of removal.
    ● Check the accelerator pedal for smooth operation. There should
    be no binding or sticking when applying or releasing the acceler-
    ator pedal.
    ● Check that the accelerator pedal moves through the full speci-
    fied distance of the specified pedal travel “A”.
    Pedal Travel “A” : 52.6 - 58.2 mm (2.07 - 2.29 in)
    CAUTION:
    When the accelerator pedal position sensor harness connector
    is disconnected, perform the “Accelerator Pedal Released Posi- LBIA0062E

    tion Learning”. Refer to EC-670, "Accelerator Pedal Released


    Position Learning" .

    Revision: December 2006 ACC-2 2006 Sentra


    SERVICE DATA AND SPECIFICATIONS (SDS)

    SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030


    A
    Accelerator Control EBS00EWA

    PEDAL TRAVEL
    ACC

    LBIA0062E E
    Accelerator pedal - total travel “A” 52.6 - 58.2 mm (2.07 - 2.29 in)

    Revision: December 2006 ACC-3 2006 Sentra


    SERVICE DATA AND SPECIFICATIONS (SDS)

    Revision: December 2006 ACC-4 2006 Sentra

    You might also like