Diesel Generator set

QST30 series engine

> Specification sheet

939kVA - 1110kVA 50Hz Power
835kW - 1012kW 60Hz Generation
Our energy working for you.™

Description Features
This Cummins® Power Generation commercial generator Cummins® Heavy-Duty Engine - Rugged 4-cycle
set is a fully integrated power generation system, industrial diesel delivers reliable power, low emissions
providing optimum performance, reliability, and versatility and fast response to load changes.
for stationary standby, prime power, and continuous duty
applications. Permanent Magnet Generator (PMG) - Offers
enhanced motor starting and fault clearing short circuit
capability.

This generator set is available with CE Alternator - Several alternator sizes offer selectable
certification. motor starting capability with low reactance 2/3 pitch
windings; low waveform distortion with non-linear loads,
All enclosed products are designed to meet fault clearing short-circuits capability, and class H
2000/14/EC or exceed EU noise legislation 2000/14/EC insulation.
step 2006.
Control System - Standard PowerCommand® electronic
This generator set has been designed to control provides total system integration including remote
ISO8528 comply with ISO8528 regulation. start/stop, precise frequency and voltage regulation,
alarm and status message display, AmpSentry protection,
This generator set is designed in facilities
output metering, auto-shutdown.
certified to ISO9001 and manufactured in
facilities certified to ISO9001 or ISO9002. Cooling System - Standard integral set-mounted
radiator system, designed and tested for rated ambient
temperatures, simplifies facility design requirements for
rejected heat.

Enclosures - Optional weather-protective and sound-

attenuated enclosures are available.

Warranty and Service - Backed by a comprehensive

warranty and worldwide distributor network.

Standby Rating Prime Rating Datasheet

50Hz 60Hz 50Hz 60Hz
Model 50Hz 60Hz
kVA (kW) kW (kVA) kVA (kW) kW (kVA)
C1000 D5 1041 (833) N/A 939 (751) N/A DS35-CPGK N/A
C1100 D5 1110 (888) N/A 1000 (800) N/A DS36-CPGK N/A
C900 D6 N/A 925 (1156) N/A 835 (1044) N/A DS80-CPGK
C1000 D6 N/A 1012 (1265) N/A 920 (1150) N/A DS82-CPGK

Our energy working for you.™

www.cumminspower.com
©
2007 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation and
Power
Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of Generation
Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS14-CPGK-RevA (9/07).
Generator Set Specifications
Governor Regulation Class ISO8528 G2
Voltage Regulation, No Load to Full Load ± 0.5%
Random Voltage Variation ± 0.5%
Frequency Regulation Isochronous
Random Frequency Variation ±0.25%
EMC Compatibility BS EN 61000-6-4 / BS EN 61000-6-2

Engine Specifications
Design 4 cycle, in line, turbo Charged and after-cooled
Bore 140.0mm (5.51in.)
Stroke 165.1mm (6.5in.)
Displacement 30.5 liters (1860in.3)
Cylinder Block Cast iron, 50°V 12 cylinder
Battery Capacity 1280 amps at ambient temperature 32°F (0°C)
Battery Charging Alternator 35 amps
Starting Voltage 24-volt, negative ground
Fuel System Direct injection
Fuel Filter Spin on fuel filters with water separator
Air Cleaner Type Dry replaceable element with restriction indicator
Lube Oil Filter Type(s) Four spin-on, full flow; two bypass oil filters
Standard Cooling System 122°F (50°C) ambient radiator

Alternator Specifications
Design Brushless, 4 pole, drip proof revolving field
Stator 2/3 pitch
Rotor Direct coupled by flexible disc
Insulation System Class H
Standard Temperature Rise 125°C Standby
Exciter Type PMG (Permanent Magnet Generator)
Phase Rotation A (U), B (V), C (W)
Alternator Cooling Direct drive centrifugal blower fan
AC Waveform Total Harmonic Distortion No load < 1.5%. Non distorting balanced linear load < 5%
Telephone Influence Factor (TIF) <50 per NEMA MG1-22.43
Telephone Harmonic Factor (THF) <3%

Available Voltages
50Hz Line – Neutral / Line – Line 60Hz Line – Neutral / Line – Line
• 110/190 • 220/380 • 110/190 • 139/240 • 255/440
• 115/200 • 230/400 • 115/200 • 220/380 • 277/480
• 120/208 • 240/416 • 120/208 • 230/380 • 347/600
• 127/220 • 255/440 • 127/220 • 240/416

Generator Set Options

Engine Alternator Warranty
• Heavy Duty air filter • Alternator heater • 5 years for Standby application
• Water jacket heater 220/240 v • High humidity isolation • 2 years for Prime application
Cooling • Exciter voltage regulator (PMG) Silencer
• Antifreeze 50/50 (Ethylene glycol) Control Panel • 9 dB attenuation critical silencer
Enclosure • 3 pole Main Circuit Breaker • 25 dB residential - delivered loose
• Sound attenuated canopy • 4 pole Main Circuit Breaker

*Note: Some options may not be available on all models – consult factory for availability.

Our energy working for you.™

www.cumminspower.com
©
2007 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation and
Power
Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of Generation
Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS14-CPGK-RevA (9/07).