Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    Paw Friwa PDF

    Uploaded by

    Goheim
    The FriWa module is a compact pre-assembled fresh water heating system that heats water on demand, without needing a warm water storage tank. It uses a highly efficient heat exchanger to transfer heat from a buffer storage, such as a solar thermal system or boiler, to potable water. This allows warm, hygienic water to be available anytime with low primary circuit temperatures and flow rates. The FriWa module is suitable for various applications like homes or facilities and integrates easily into heating systems with buffer storage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Paw Friwa PDF

    Uploaded by

    Goheim
    114 views2 pages
    The FriWa module is a compact pre-assembled fresh water heating system that heats water on demand, without needing a warm water storage tank. It uses a highly efficient heat exchanger to transfer heat from a buffer storage, such as a solar thermal system or boiler, to potable water. This allows warm, hygienic water to be available anytime with low primary circuit temperatures and flow rates. The FriWa module is suitable for various applications like homes or facilities and integrates easily into heating systems with buffer storage.

    Original Title

    paw_friwa.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The FriWa module is a compact pre-assembled fresh water heating system that heats water on demand, without needing a warm water storage tank. It uses a highly efficient heat exchanger to transfer heat from a buffer storage, such as a solar thermal system or boiler, to potable water. This allows warm, hygienic water to be available anytime with low primary circuit temperatures and flow rates. The FriWa module is suitable for various applications like homes or facilities and integrates easily into heating systems with buffer storage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    114 views2 pages

    Paw Friwa PDF

    Uploaded by

    Goheim
    The FriWa module is a compact pre-assembled fresh water heating system that heats water on demand, without needing a warm water storage tank. It uses a highly efficient heat exchanger to transfer heat from a buffer storage, such as a solar thermal system or boiler, to potable water. This allows warm, hygienic water to be available anytime with low primary circuit temperatures and flow rates. The FriWa module is suitable for various applications like homes or facilities and integrates easily into heating systems with buffer storage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PAW GmbH & Co.

    KG
    phone: +49-5151-9856-0, fax: +49-5151-9856-98

    Fresh Water Module “FriWa”

    primary circuit
    The compact and completely pre-assembled station heats water in a comfortab-
    le and hygienic way only when it is needed. The warm water is heated up only
    at the moment it is needed – quickly, safely and cleanly – so that fresh warm
    hygenical water is available at any time withour having to use a warm water
    storage tank. The energy necessary for the heating of potable water comes
    from a buffer storage which acn be heated via various systems: solar systems
    as well as solid combustibles, traditional oil or gas boilers or other systems.
    The FriWa module is suited very well for the application in connection with a
    solar thermal installation and/or a low-temperature heating system thanks to
    the low primary temperatures necessary.

    Your advantages:

    Connections:
    primary circuit 3/4’’ female, potable water circuit 1’’ male, circulation line
    (optional) 3/4’’ male

    With pre-assembled steel wall brackt


    can be mounted easily onto the wall

    Fully assembled with flat sealing union connections

    Full port ball valves

    Flow check valve inside the return pipe of the primary circuit,
    manual opener, 200 mm WC, prevent any gravity circulations; inside the
    circulation line (optional) located before the pump

    Potable water circuit with piston valves


    easy handling, ball valves inside the primary circuit key-activated

    With solar circulation pumps by WILO


    pre-assembled and prewired,

    completely isolatable
    no emptying necessary for servicing

    Flowmeter on the cold water supply outlet warm


    for electronic measurement of the flow rate and heat measurement. warm
    primary inlet return
    Circulation pump (optional) for maximum comfort circuit cold circulation
    event-driven (depending on the needs), time- or temperature-driven return water

    Flushing unit integrated on the potable water side


    two drain valves (on the elbow unions on the heat exchanger) permit flushing
    the heat exchanger. On the primary side with deculator on the topmost
    point on the heat exchanger and drain valve for the emptying of the heat
    exchanger.

    accessories
    see page
    146-149
    Solex

    Performance characteristics of the FriWa module, for cold water entry temperature = 10 °C
    warm water tap potential of 45°C transmission primary flow temperature primary return
    temperature warm water at the temperature necessary temperature
    set preset warm water
    temperature

    45°C 21 l/min 50 kW 50,0 °C 23°C


    45 l/min 110 kW 75,0 °C 15°C
    04/2007

    55°C 24 l/min 61 kW 60,0 °C 27°C


    40 l/min 103 kW 75,0 °C 19°C

    122
    PAW GmbH & Co. KG
    phone: +49-5151-9856-0, fax: +49-5151-9856-98

    Fresh Water Module “FriWa”

    Highly efficient stainless steel plate heat exchanger


    especially long, designed for low-flow operation, generous-
    ly dimensioned, for the transfer of high power outputs
    with slight temperature differences, permits a low primary
    flow and return temperature, completely integrated into
    the insulation.

    High tap potential until 45 l/min


    Like this, the FriWa module has various fields of application
    as for example in detached houses, houses for several
    families, sporting facilities, nursing homes etc.

    Safety valve 10 bar


    on the potable water side

    Integrated regulation
    completely pre-assembled, preset and prewired. The tem-
    perature- and flow rate-depending speed control of the
    primary pump permits a quick and precise adjustment of
    the preset water temperature.
    The circulation pump (optional) can be operated on de-
    mand (by tap impulse) time- or temperature-depending.
    Additionally, it is possible to pilote a three-way reversing
    valve (not included in the delivery). This way, very warm
    primary return water (evolving during the operation of the
    circulation pump or during phases of low tap potentials)
    can be returned to the buffers torage on a higher level so
    that the colder, lower part of the buffer storage remains. Hydraulic scheme FriWa
    The integrated heat quantity survey permits a simple
    overview over the energy needed for the preparation of
    the warm potable water.

    Fresh Water module by PAW


    Advantages Benefits

    • No warm water storage • Warm water is always fresh


    TECHNICAL DATA FriWa necessary and hygienical
    Dimension DN 20 - 3/4“ • Tap potential of up to 45 l/ min • multiple fields of application:
    Material fittings brass / red brass detached houses, houses for
    • optimum cooling
    gaskets Klingersil / EPDM several families, sporting facilities,
    of the heating water
    insulation EPP nursing homes etc
    • compact design
    check valves modified PPS • particularly suitable for the
    heat exchanger plates + sockets: 1.4400 • plug-in solution application in heating installations
    solder: 99,99% copper • The FriWa module offers with solar thermal systems
    Techn. Data max. pressure 10 bar different operational modes • can be integrated easily into
    max. temperature 130 °C, temporarily 160 °C of the circulation existing heating systems with
    Equipment safety valve 10 bar, for potable water • low primary flow temperature buffer storage
    primary pump 25 - 90 Watt of 50 °C suffices for the • simple assembly and installation
    circulation pump 38 Watt (optional) preparation of 45°C warm water
    • optimum adaption to the
    heat exchanger 30 plates, type 1P • heat quantity survey different user’s demands
    Measurements connections primary circuit: 3/4“ female of the warm water consumed
    • optimum incorporation into low
    potable water circuit: temperature heating systems and
    1“ male, flat sealing solar systems
    Solex

    optional: circulation pipe: 3/4“ male


    • simple overview of the need of the
    flat sealing energy needed for the preparation
    over-all width 560 mm of the warm potable water
    over-all height 880 mm

    pump version SI Item n°

    primary: Wilo RS 15 / 6-3, with circulation connection and pump Wilo Z20 / 1 640 4630 WIZ
    primary: Wilo RS 15 / 6-3, without circulation pump, connection 1’’ male with tap 640 4630 WI
    04/2007

    Circulation set, for fresh water module without circulation pump,


    with pump Wilo Star-Z 20/1, insert stop and valve, 1“ male 640 413

    Accessories are storage items; dispatch usually 2 days after order processing
    123

    You might also like