Made

in
U.S.A. ©

Quick Fix 117-032, 117-033, 117-034, 117-063, 2110, 83075, PM-120

WELDING
INSTRUCTION MANUAL & OWNERS GUIDE
Models: 117-034

© CMC July1995 Form No. 811-399-000 Rev. X

Note: Replacement Parts Lists are at the end of the manual

0.030 E71T flux core wire. If you have purchased the
optional gas conversion kit (2111) you should use 0.024
ER70S-6 wire. Use of larger diameter wires may reduce
performance and/or cause damage to the welder.
If you are using flux core wire (E-71T), use
only 0.030 (0.8mm) diameter wire. If you
have purchased the gas conversion kit
(2111) and are using solid (ER70S-6) wire,
use only 0.024 (0.6mm) diameter wire. Use
of larger diameter wires will reduce
performance and may damage the unit.
0.024 -------------------------------------------- 0.6mm
0.030 -------------------------------------------- 0.8mm
238-155, 4320, 238-224, M15174
 238-155, 4320, 238-224, M15174
Item Lincoln Stock # Lincoln Stock # Customer # Description
1 KP1942-1 334-203-300 43480 Standard Nozzle
KP1942-1 334-203-400 M15578 Standard Nozzle
KP1956-1 334-211-300 43290, M15577 Spot Nozzle, Notched
KP1942-3 334-210-300 43300 Aluminum Nozzle
2 KP2039-1B1 334-159-300 43090 0.024 Contact Tips (6)
KP2039-1B1 334-159-400 M15522 0.024 Contact Tips (6)
KP2039-2B1 334-160-300 43100 0.030 Contact Tips (6)
KP2039-2B1 334-160-400 M15523 0.030 Contact Tips (6)
KP2039-3B1 334-161-300 43110 0.035 Contact Tips (6)
KP2039-3B1 334-161-400 M15524 0.035 Contact Tips (6)
3 KP2040-1 334-228-000 35-50 Gas Diffuser
4 334-217-000 (35-70) Insulation
5 334-219-000 (35-80A-1) Handle Cap
6 334-227-000 35-60-60 Conductor Tube
7 334-220-000 (35-60-N) Nut
8 334-221-000 35-90 Trigger
9 860-744-000 Trigger Harness
10 084-019-000 Set Screw, #8-32 X 1/8"
Not Shown
11 KP1937-1 4331 Steel Liner
12 KP1959-1 4325 Teflon Liner
Complete 10' Gun Assy.
13 238-155-000 4320
Less tip and nozzle
 MANUFACTURER’S LIMITED WARRANTY
The manufacturer warrants that for 1 year from date of purchase for the MIG Welder and for 90 days from date of
purchase for the MIG Welding Gun, it will repair, at no charge for parts or labor, the MIG Welder or MIG Welding Gun,
proven defective in material or workmanship. If after reasonable efforts by the manufacturer, the MIG Welder or MIG
Welding Gun is deemed unrepairable, the manufacturer will, at its option, refund the original purchase price or supply a
replacement welder or gun (which ever is defective).
This warranty extends to the MIG Welder and MIG Welding Gun only and does not apply to any accessory items included
with the product which are subjected to wear from usage; the replacement or repair of these items shall be at the expense
of the owner.
This warranty does not extend to the following consumable parts. These parts are consumed in normal operation of MIG
Welder.
CONTACT TIPS, NOZZLES, GUN LINERS, DRIVE ROLLERS, and FELT WIRE CLEANERS.
In addition, this warranty does not extend to any damage caused by the untimely replacement or maintenance of any
of the above listed CONSUMABLE parts.
THE TERMS OF THE MANUFACTURER’S LIMITED WARRANTY CONSTITUTE THE BUYER’S SOLE AND
EXCLUSIVE REMEDY. THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN DURATION TO THIS EXPRESS WARRANTY. AFTER 1 YEAR FROM DATE OF
PURCHASE FOR THE MIG WELDER AND 90 DAYS FROM DATE OF PURCHASE FOR THE MIG WELDING GUN,
ALL RISK OF LOSS, FROM WHATEVER REASON, SHALL BE UPON THE PURCHASER. THE MANUFACTURER
SHALL NOT BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES:
THE MANUFACTURER’S LIABILITY, IF ANY, SHALL NEVER EXCEED THE PURCHASE PRICE OF THIS PRODUCT,
REGARDLESS OF WHETHER LIABILITY IS PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR
IMPLIED), NEGLIGENCE, STRICT TORT OR ANY OTHER THEORY.
This warranty extends to each person who acquires lawful ownership within one year of the original retail purchase for
the MIG Welder and within 90 days of the original retail purchase for the MIG Welding Gun, but is void if either has been
abused, altered, misused, or improperly packaged and damaged when returned for repair. Some states do not permit the
limitation of warranties or limitation of consequential or incidental damages, so the above disclaimer and limitation may
not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
TO OBTAIN SERVICES UNDER THIS WARRANTY:
Owner may avoid transportation charges, if he wishes, by calling MIG WELDER SERVICE, at one of the telephone
numbers listed below, for free diagnosis and immediate shipment of replacement parts. The owner, in this case,
assumes the responsibility for installation of parts.

US Customers: In Canada:
MIG Welder Service Authorized Century Repair CANADA
Minneapolis, Minnesota 55431 Markham, Ontario L3R 3L4
Telephone Numbers: Telephone Numbers:
Local: (952) 884-3211 (416) 239-6400 (416) 470-7033
866-236-0044, prompt 3
Toll Free: (800) 328-2921 Toll Free: (800) 668-8642

Form #811-399-000 Rev. X

117-034, 83075
 117-034, 75 Amp Quick Fix
Item Lincoln Stock # Customer # Description Item Lincoln Stock # Customer # Description
1 880-011-888 Main weld transformer Not Shown (23-32)
2 880-010-888 Reactor Coil w/ thermostat 24 410-575-030 Hood
246-310-000 Thermostat only 25 218-942-666 Polarity jumper
3 860-905-666 860-905-666 Rectifier assy. 26 412-280-666 Gun connector clamp
4 216-087-666 216-087-666 Fan motor 27 239-010-300 41000 Ground clamp
5 316-009-000 Fan blade 28 2111 Gas conversion kit
6 248-185-666 Power cord 29 2139 Wheel kit
7 312-076-666 312-076-666 Wire spindle 30 331-482-300 37340 .030, 2# Flux wire E71-T
43480, 334-203-300, KP1942-1,
8 131-419-000 131-350-001 Tension kit 33 KP21T-50 M15578
Steel welding nozzle
Drive roller, 0.024 / 0.030 /
9 310-122-500 4323 KP21T-62 43300, 334-210-300, KP1942-3 Aluminum welding nozzle
0.035
43290, 334-211-300, KP1956-1,
860-616-002 4324 Aluminum Drive Roller KP21-62-FAS M15577
Spot welding nozzle
43090, 334-203-300, KP2039-1B1,
10 880-089-666 Tension arm only 34 KP11-25, KH710 M15522
0.024 Contact Tips
239-123-666 43100, 334-160-300, KP2039-2B1,
11 Inlet guide tube KP11-30, KH711 M15523
0.030 Contact Tips
239-208-000
Quick release drive base 43110, 334-161-300, KP2039-3B1,
12 880-130-666 KP11-35, KH712 M15524
0.035 Contact Tips
assy. (includes 10-12)
13 216-089-666 216-089-666 Drive Motor w/gearbox 35 334-228-000 334-228-000 Gas diffuser
14 880-012-010 Handle 36 334-217-000 (35-70) Insulation
15 412-278-010 Hood hinge 334-227-000 334-227-000 Conductor Tube w/ insulation
16 410-568-020 Right side panel 37 334-219-000 (35-80A-1) Handle Cap
17 410-691-060 Front panel 38 S11604-51 084-019-000 Set Screw, #8-32 X 1/8"
18 880-094-666 880-094-666 Wire speed control assy 39 334-221-000 35-90 Trigger
19 246-041-666 246-107-000 Knob 40 KP45-40-15 4331, KP1937-1 Steel liner
20 246-177-666 High-Off-Low rocker switch KP1959-1 4325 Teflon liner

21 238-223-666 Ground cable assy. 41 860-744-000 Trigger harness

Mig Gun (see 33-42 for Standard
22 238-155-000 238-224-100 42 6-32 X 7/16" screw for trigger
parts) Hardware Item
23 410-557-020 Left side panel
1/10/2007

Duty Cycle at Rated Rated

Model Primary Input Input Plug Voltage Settings Agency Listing Max Output
Output Output
117-034 120V, 15 amp 15A 20% 75 amps 2 (low / high) CSA 70 amps
117-034, 83075
117-034, 83075