STRUCTURAL CALCULATION REPORT

RING BEAM FOUNDATION

POTABLE WATER STORAGE TANK

Potable Storage Water Tank

 QUALITY CONTROL SHEET

DOCUMENT STRUCTURAL DESIGN CALCULATION REPORT : RING BEAM FOUNDATION

PROJECT ABHA, in the Kingdom of Saudi Arabia

CODE Ring Beam Foundation

SIGNATURE AHN
AUTHOR DATE (DD/MM/YY)
10-12-2017
( REVISION)
SIGNATURE AHN
APPROVED
DATE 10-12-2017
DESTINATARY AZIZ Company for Contracting & Industrial Investment

Potable Storage Water Tank 1.

 INDEX

1. INTRODUCTION ................................................................................................................. 3
2. KEY PLAN .......................................................................................................................... 4
3. DESIGN CRITERIA ............................................................................................................ 5
3.1. REFERENCED CODES AND STANDARDS ..................................................................................... 5
4. MATERIALS ....................................................................................................................... 6
4.1. CONCRETE ...................................................................................................................................................... 6
4.2. STEEL REINFORCEMENT ........................................................................................................................ 6
5. CONSTRUCTION PROCESS............................................................................................. 7
5.1. FORM WORKS................................................................................................................................................ 7
5.2. PROTECTION OF CIVIL WORKS .......................................................................................................... 7
5.3. CONSTRUCTION JOINTS ......................................................................................................................... 7
6. GEOTECHNICAL DATA & CHECKS................................................................................. 8
6.1. NET SAFE BEARING CAPACITY ........................................................................................................... 8
6.2. FOUNDATION PROPOSAL ....................................................................................................................... 8
7. APPLIED LOADS ............................................................................................................... 9
7.1. LOADS ................................................................................................................................................................ 9
7.2. ROOF LIVE LOADS ...................................................................................................................................... 9
8. LOADS COMBINATIONS ................................................................................................ 10
9. DESIGN OF FOUNDATION ............................................................................................. 11
9.1. LOADS SUMMARY .................................................................................................................................... 11
9.2. TANK DATA ................................................................................................................................................... 11
9.3. MATERIALS ................................................................................................................................................... 11
9.4. SOIL PARAMETERS ................................................................................................................................. 12
9.5. FOOTING DIMENSIONS ......................................................................................................................... 12
9.6. LOAD TRANSFERE ................................................................................................................................... 13
9.7. LOAD CRITERIA DEFINATION ............................................................................................................ 13
9.8. LOADS RESULTANT TABLE................................................................................................................. 14
9.9. UN-FACTORED LOADING COMBINATIONS TABLE ................................................................ 15
9.10. SOIL PRESSURE CHECK TABLE ...................................................................................................... 16
9.11. OVER-TURNING CHECK TABLE ........................................................................................................ 17
9.12. SLIDING CHECK TABLE ......................................................................................................................... 18
9.13. STRENGTH DESIGN ................................................................................................................................ 19

Potable Storage Water Tank 2.

1. INTRODUCTION
ThepresentreportsrefertothestructuraldesignofRINGBEAMFOUNDATIONSTABILITY&STRENGTH
CHECKS.ForpotablewaterstoragetanksatsouthofABHAcity.

Potable Storage Water Tank 3.

2. KEY PLAN

Potable Storage Water Tank 4.

3. DESIGN CRITERIA

3.1. REFERENCED CODES AND STANDARDS

Thefollowingcodeswereusedinthepresentreport:
SaudiBuildingCodes(2007):
SBC301:LoadingandForces
SBC303:SoilandFoundations

InternationalandAmericanCodes:
IBC2006:InternationalBuildingCode
ASCE7:MinimumDesignLoadsforBuildingsandotherStructures,2005.
ASTM:formixdesignandconcreteproperties.
ACI31814:forconcretesectionsdesign.

Potable Storage Water Tank 5.

4. MATERIALS

4.1. CONCRETE
Blinding concrete shall comply with the Concrete Mix Class A Type SRC (Sulphate Resistance
PortlandcementTypeV):Minimumcharacteristicstrengthfc20MN/m2

Structuralconcretehastocomplywiththefollowingspecifications:
Minimumcharacteristicstrengthfc40MN/m2(at28daysperASTMC31/39cylindertest)
Minimumcementitiouscontent370kg/m3
Flyashcontentnotlessthan10%ofcementitiousmaterials50kg/m3
Max.Freewater/cementitiousmaterialratio0.40
Hot weather precautions: The overall maximum temperature limit for fresh concrete when
startingtoplaceitinitsfinalpositionis30C.
Concretecoverofsteelreinforcementbars:
70mmonanysteelincivilorplantworksincontactwithsoil,thetolerancesonthecoverlayer.
Measuredatanypointshallbe5mmontheabovedimensions.

fc
Element
(MPa)

PlainConcrete 20.0

ReinforcedConcrete 40.0

4.2. STEEL REINFORCEMENT

Steel reinforcement of concrete has to comply with ASTM A615/A615M14 Grade 60 (Standard
SpecificationforDeformedandPlainCarbonSteelBarsforConcreteReinforcement).Thetensileyield
strengthshallbenotlessthan420MPa.TheductilityclassBisrequired.

Fy
Element Grade
(MPa)

ReinforcementRebar ASTMA615 420.0

Potable Storage Water Tank 6.

5. CONSTRUCTION PROCESS

5.1. FORM WORKS

Allconcreteformworkshallbeimperviousinordertopreventmoistureloss.
All concrete surfaces below ground level shall have ordinary finish and all concrete surfaces above
groundlevelshallhavefairfaceconcretefinish.
Allvisiblecornersshallbechamferedwithtriangularfillets20/20mm.
Tiesthroughtheconcreteshallnotbeacceptedinstructures,whicharesubjectedtoaonesidewater
pressure.

5.2. PROTECTION OF CIVIL WORKS

All concrete structures with a floor level below permanent grade shall have the underground part
completelyencasedinatankingmadefromtwo layers bituminous coating insulation.
Thetankingonthesidesandthetopsofthestructuresshallbefullytorchappliedonabitumenprimed
surface. The tanking under the structure shall be laid on a concrete blinding. All overlaps shall be
minimum100mmandfullytorchwelded.
The protection material shall continue to a level not less than 0.20 m above final grade (Station
elevation).
Allexposedundergroundcoatingsandmembranesshallbeprotectedtopreventdamageduringbackfill.

5.3. CONSTRUCTION JOINTS

Constructionjointsarepreplannedandindicatedintheconstructiondrawings.

Potable Storage Water Tank 7.

6. GEOTECHNICAL DATA & CHECKS

6.1. NET SAFE BEARING CAPACITY

ItisrecommendedtodesignTankfoundationswithsafebearingcapacityof250KN/m2.
Themaximumexpectedsettlementwillbelessthan15mmundertheimposedpressureof250KN/m2.
Itisrecommendedtoremoveallbouldersfromthebottomoftheexcavationforfoundations.
The bottom of excavation for foundations shall be prepared using blinding concrete with a minimum
cementcontentof200kg/m3andacharacteristicstrengthofminimum20N/mm2.

6.2. FOUNDATION PROPOSAL

Sitepreparationwillbeinformofgradingandleveling.Beforestartingtheconstructionactivities,the
siteshallbestrippedandallthecobblesandbouldersmustberemoved.
Tomaketheprojectsiteleveled,cuttingandfillingactivitiesareinvolved.Incaseoffillingbelowthering
beamfoundation,blindingconcretewithaminimumcementcontentof200kg/m3andacharacteristic
strengthofminimum2N/mm2isrequired.
Shallowfoundationwithaconcreteringbeam(InvertedTSection)accordingtothesubmitteddrawings.

Potable Storage Water Tank 8.

7. APPLIED LOADS

7.1. LOADS
AllLoadswillbeaccordingtothedesignTHCEK&SungchangJVaspertablebelow:

7.2. ROOF LIVE LOADS

Theminimumdistributedandconcentratedloadsconsideredasimposedliveloadswillbeinaccordance
withthetablebelow:

Description Uniform Distributed Load (kN/m2) Concentrated Load (kN)

Inaccessible roof 1.00 ---

Potable Storage Water Tank 9.

8. LOADS COMBINATIONS

Potable Storage Water Tank 10.

9. DESIGN OF FOUNDATION

9.1. LOADS SUMMARY

9.2. TANK DATA

9.3. MATERIALS

Potable Storage Water Tank 11.

9.4. SOIL PARAMETERS

9.5. FOOTING DIMENSIONS

Potable Storage Water Tank 12.

9.6. LOAD TRANSFERE

9.7. LOAD CRITERIA DEFINATION

Potable Storage Water Tank 13.

9.8. LOADS RESULTANT TABLE

Potable Storage Water Tank 14.

9.9. UN-FACTORED LOADING COMBINATIONS TABLE

Potable Storage Water Tank 15.

9.10. SOIL PRESSURE CHECK TABLE

Potable Storage Water Tank 16.

9.11. OVER-TURNING CHECK TABLE

Potable Storage Water Tank 17.

9.12. SLIDING CHECK TABLE

Potable Storage Water Tank 18.

9.13. STRENGTH DESIGN

Steel Tank Loads

Potable Storage Water Tank 19.

 MaximumTension(T)=4953.87KN

Potable Storage Water Tank 20.



Potable Storage Water Tank 21.