Cme Sip

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

My CCIE Voice Preparation

Friday, December 28, 2012 Categories

CCIE Voice General (2)


CME SIP Configuration CME (11)
CUCM (8)
In this post, I want to share with you how to configure CME running in a SIP mode. Please follow my instructions step by step:
CUE (8)
Step 1: Fax (1)
Configure a DHCP pool for CME. Gatekeeper (1)
Gateway (11)
Step 2: Presence Server (1)
The firmware files should be there on the router flash for the phones to bootup. If the phone has already been booted up on a CME QoS (1)
system then you may skip this step. If not, load the firmware files on to flash from a TFTP server. Configure CME as a TFTP server
SRST (4)
pointing to the firmware files:
UCCX (2)
Voice Applications (4)
tftp-server flash:PHONE/7945-7965/apps45.8-3-2-27.sbn alias apps45.8-3-2-27.sbn Voicemail (6)
tftp-server flash:PHONE/7945-7965/cnu45.8-3-2-27.sbn alias cnu45.8-3-2-27.sbn
tftp-server flash:PHONE/7945-7965/cvm45sip.8-3-2-27.sbn alias cvm45sip.8-3-2-27.sbn
Blog Archive
tftp-server flash:PHONE/7945-7965/dsp45.8-3-2-27.sbn alias dsp45.8-3-2-27.sbn
tftp-server flash:PHONE/7945-7965/jar45sip.8-3-2-27.sbn alias jar45sipp.8-3-2-27.sbn 2013 (24)
tftp-server flash:PHONE/7945-7965/SIP45.8-3-3S.loads alias SIPP45.8-3-3S.loads 2012 (10)
tftp-server flash:PHONE/7945-7965/term45.default.loads alias term45.default.loads December (6)
tftp-server flash:PHONE/7945-7965/term65.default.loads alias term65.default.loads CUE Setup and Integration with
CME SCCP Configuration

In this example, the firmware files are located on flash under PHONE directory. You need to instruct the phone with the following CME SIP Configuration
command to download the firmware: Auto-Alternate-Routing (AAR)
Fax in General
voice register global
... CME - Enable Web Access

load 7965 SIP45.8-3-3s [Without the .loads extension] November (3)


...
July (1)

2011 (5)
Step 3:
This is an example of a CME configuration running in a SIP mode:
Search This Blog

! Se
voice service voip
allow-connections sip to sip [Required for SIP to SIP calls]
About Me
sip
registrar server expires max 1200 min 300 duzceli1979
bind all source-interface fast ethernet 0/0 [Binds media/control signaling to interface defined
View my complete prof
in "voice register global"]
!
!
!
voice register global Helpful Links
mode cme [Without this command, CUCME will function in SRST mode]
source-address 192.168.10.1 port 5060 http://www.ipexpert.com/Cisco/CC
ce/Free-Resources
max-dn 20
http://ciscovoiceguru.com/
max-pool 10
http://voiceonbits.com/
load 7970 SIP70.8-2-1S
http://cciev.wordpress.com/
authenticate register [Required if some phones are on remote subnet]
authenticate realm cisco.com
voicemail 100 [Defines voicemail pilot number that is dialed when pressing message key]
tftp-path flash:
create profile sync 0000589556325309 [Enter this after EVERY change!]
!

voice register dn 1
number 101
call-forward b2bua noan 100 timeout 20 [CUE is setup as a B2BUA connected via SIP dial-peer]
allow watch [Allows phone line to be monitored by a watcher in a presence service]
name Phone1 [Configures caller ID that is sent to other phones and over dial-peers]
label 4085251001 [Configures line label on physical phone]
!
voice register dn 2
number 102
call-forward b2bua noan 100 timeout 20
allow watch
name Phone2
label 4085251002
!
voice register pool 1
id mac 0016.47CD.9BD7
type 7965
number 1 dn 1 [Without this, I've seen phones experience registration issues]
presence call-list [Enables BLF monitoring that appear in call lists and directories on this
phone]
dtmf-relay sip-notify
username user1 password cisco [Required for "authenticate register" command]
codec g711ulaw
blf-speed-dial 2 102 label Phone2 [Enables BLF monitoring of a number associated with a speed-
dial number on the phone]
blf-speed-dial 3 103 label 3911-1
blf-speed-dial 4 104 label 3911-2
!
voice register pool 2
id mac 0014.6948.1D52
type 7965
number 1 dn 2
dtmf-relay sip-notify
username user2 password cisco
codec g711ulaw
!
voice hunt-group 1 parallel
final 100
list 102,103,104
pilot 180
!
!
presence [Enables presence service and enters presence configuration mode]
presence call-list [Globally enables BLF monitoring for directory numbers in call lists and
directories on all locally register phones]
max-subscription 120 [Maximum number of concurrent watch sessions that are allowed]
!
sip-ua
presence enable [Allows the router to accept incoming presence requests]
!

Posted by duzceli1979 at 6:25 AM Recommend this on Google

Labels: CME

No comments:

Post a Comment

Enter your comment...

Comment as: Google Account

Publish Preview

Newer Post Home Older Post

Subscribe to: Post Comments (Atom)

Simple template. Powered by Blogger.

You might also like