Scribd Logo
Upload

Welcome to Scribd!

  • 173 views

    Davit Cal 2251B Davit Arm Calculation

    Uploaded by

    Karina Roquel
    The document describes the design of a davit pipe according to pressure vessel design standards. It provides calculations to determine: (1) the axial and bending stresses on the pipe, (2) the bending moments at different points, and (3) verifies that the selected pipe size and material can withstand the calculated stresses. An 88.9mm diameter pipe made of SA-106 Gr B steel is determined to be adequate, with combined stresses below allowable limits.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Davit Cal 2251B Davit Arm Calculation

    Uploaded by

    Karina Roquel
    173 views4 pages
    The document describes the design of a davit pipe according to pressure vessel design standards. It provides calculations to determine: (1) the axial and bending stresses on the pipe, (2) the bending moments at different points, and (3) verifies that the selected pipe size and material can withstand the calculated stresses. An 88.9mm diameter pipe made of SA-106 Gr B steel is determined to be adequate, with combined stresses below allowable limits.

    Original Description:

    gruas

    Original Title

    292419530 Davit Cal 2251B Davit Arm Calculation

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the design of a davit pipe according to pressure vessel design standards. It provides calculations to determine: (1) the axial and bending stresses on the pipe, (2) the bending moments at different points, and (3) verifies that the selected pipe size and material can withstand the calculated stresses. An 88.9mm diameter pipe made of SA-106 Gr B steel is determined to be adequate, with combined stresses below allowable limits.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    173 views4 pages

    Davit Cal 2251B Davit Arm Calculation

    Uploaded by

    Karina Roquel
    The document describes the design of a davit pipe according to pressure vessel design standards. It provides calculations to determine: (1) the axial and bending stresses on the pipe, (2) the bending moments at different points, and (3) verifies that the selected pipe size and material can withstand the calculated stresses. An 88.9mm diameter pipe made of SA-106 Gr B steel is determined to be adequate, with combined stresses below allowable limits.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 4

    V-2251 B

    Doc No JI-191-030020-DM05-013 - Rev B2

    Page 97
    DESIGN OF DAVIT
    In accordance with pressure vessel design manual by Dennis Moss

    Notation : -
    P Axial Load 335 kg = 739 lbs
    A Cross-sectional area 19.458 cm = 3.016 in
    Z Section modulus 36.46 cm = 2.225 in
    r Radius of gyration 2.885 cm = 1.136 in
    tp Wall thickness of pipe davit 7.62 mm = 0.3 in
    a Outside radius of pipe 44.45 mm = 1.75 in
    L1 Length of davit 562 mm = 22.12 in
    L2 Height of pipe from support 375 mm = 14.76 in
    fa Axial Stress 17.22 kg/cm = 244.78 lb/in
    fb Bending stress
    Fa Allowable axial stress 13250 psi
    Fb Allowable bending stress 21000 psi
    K Stress coefficients
    R Radius of bent of davit 305 mm = 12 in
    M1 Bending moment in davit at top support
    M2 Maximum bending moment in curved davit
    I Moment of Inertia 162.09 cm4 = 3.8943 in4
    Fy Minimum specified yield stress 35000 psi
    fv Vertical force 335 kg = 739 lbs
    fh Horizontal force 335 kg = 739 lbs
    W1 Weight of davit 16 kg = 35 lbs

    Size of davit pipe used - OD 88.9mm * 7.62mm thk


    Weight of blind flange - 293.00 kg
    Weight of nozzle N2 - 24.00 kg
    Weight of nozzle N5 - 5.8 kg
    Miscellaneous weight - 10 kg
    Hence Total weight of the blind flange is 332.8 kg ~ 335 kg

    Material Specification of davit pipe - SA-106 Gr B


    Yield strength of pipe = Fy = 35000 psi
    Allowable bending stress Fb = 0.6*Fy = 21000 psi
    Allowable axial stress Fa = 13250 psi (From sec VIII Div 1 Appendix-L, Ed 2007
    allowable compressive stress for columns)

    Axial Stress fa = P = 17.22 kg/cm2 = 244.78 lb/in


    A

    Page 98
    Bending moment in davit pipe at top support M1
    M1 = fv*L1 + 0.5*W1*L1 + fh*L2
    V-2251 B
    Doc No JI-191-030020-DM05-013 - Rev B2

    = 27641.42 in-lb

    Maximum bending moment incured at davit M2


    M2 = M1 (L2 - R)
    L2
    = 5168.72 in-lb

    Coefficients
    = tp* R= 1.176
    a

    = 6 = 0.45
    5+6*

    K= 1- 9 0.6617
    10+12

    Bending Stress at
    M1, fb = M1 12423.11 psi
    Z

    M2, fb = M2 * a * 2
    I (3K 3*)
    = 2011.68 psi

    Combined stress
    fa + fb = <1
    Fa Fb

    Hence combined stress at M1


    0.61 <1

    Hence combined stress at M2


    0.11 <1

    Thus we can conclude that the provided davit pipe is adequate as the combined stress is
    Lesser than 1.
    V-2251 B
    Doc No JI-191-030020-DM05-013 - Rev B2
    V-2251 B
    Doc No JI-191-030020-DM05-013 - Rev B2

    You might also like