DIESEL GENERATOR SET

DE110E2

EU stage II emissions compliant.

Image shown may not reflect actual package

Output Ratings

Generator Set Model - 3 Phase Prime* Standby*

400/230 V, 50 Hz 100.0 kVA 110.0 kVA

80.0 kW 88.0 kW

480/277 V, 60 Hz 113.0 kVA 125.0 kVA

90.4 kW 100.0 kW

* Refer to ratings definitions on page 4.

Ratings at 0.8 power factor.

Technical Data
Engine Make & Model:
C4.4

Generator Model: LC3114F

Control Panel: EMCP 4.1

Base Frame Type: Heavy Duty Fabricated Steel

Circuit Breaker Type: 3PoleMCCB

Frequency: 50 Hz 60 Hz

Engine Speed: RPM 1500 1800

Fuel Tank Capacity: litres (US gal) 250 (66.0)
Fuel Consumption, Prime: l/hr (US gal/hr) 21.7 (5.7) 25.7 (6.8)

Fuel Consumption, Standby : l/hr (US gal/hr) 23.8 (6.3) 28.5 (7.5)


DIESEL GENERATOR SET

Engine Technical Data

Physical Data Lubrication System

Manufacturer: Caterpillar Oil Filter Type: Spin-On, Full Flow

Model: Total Oil Capacity l (US gal): 8.0 (2.1)
C4.4
No. of Cylinders/Alignment: 4 / In Line Oil Pan l (US gal): 7.0 (1.8)
Cycle: 4 Stroke Oil Type: API CC/SE
Induction: Cooling Method: Water
Turbocharged Air To Air
Charge Cooled
Cooling Method: Water Performance 50 Hz 60 Hz
Governing Type: Electronic
Engine Speed: RPM 1500 1800
Governing Class: ISO8528G2
Gross Engine Power: kW (hp)
Compression Ratio: 18.3:1
-Standby: 103.0 (138.0) 117.5 (158.0)
Displacement: l (cu.in) 4.4 (268.5)
-Prime: 93.6 (126.0) 106.8 (143.0)
Bore/Stroke: mm (in) 105.0 (4.1)/127.0 (5.0)
BMEP: kPa (psi)
Moment of Inertia: kg m (lb. in) 1.51 (5160) -Standby: 1873.0 (271.7) 1781.0 (258.3)
Engine Electrical System: -Prime: 1702.0 (246.9) 1619.0 (234.8)
-Voltage/Ground: 12/Negative Regenerative Power: kW 8.2 13.8
-Battery Charger Amps: 65
Weight: kg (lb) - Dry: 500 (1102) Fuel System
- Wet: 520 (1146) Fuel Filter Type: Replaceable Element
Recommended Fuel: Class A2 Diesel or BSEN590
Fuel Consumption: l/hr (US gal/hr)
Air System 50 Hz 60 Hz
110% 100% 75% 50%
Air Filter Type: Replaceable Element Load Load Load Load
Combustion Air Flow: Prime
m/min (cfm) -Standby: 6.3 (221) 7.8 (275) 50 Hz 23.8 (6.3) 21.7 (5.7) 16.5 (4.4) 11.7 (3.1)
-Prime: 6.0 (212) 7.8 (274) 60 Hz 28.5 (7.5) 25.7 (6.8) 19.6 (5.2) 14.1 (3.7)
Max. Combustion Air Intake
Restriction: kPa (in H2O) 8.0 (32.1) 8.0 (32.1) Standby
Radiator Cooling Air Flow: 50 Hz 23.8 (6.3) 18.0 (4.8) 12.6 (3.3)
m/min (cfm) 187.8 (6632) 244.2 (8624) 60 Hz 28.5 (7.5) 21.5 (5.7) 15.2 (4.0)
External Restriction to
(based on diesel fuel with a specific gravity of 0.85 and conforming to
Cooling Air Flow: Pa (in H2O) 125 (0.5) 125 (0.5) BS2869, Class A2)

Exhaust System 50 Hz 60 Hz
Cooling System 50 Hz 60 Hz
Silencer Type: Industrial
Cooling System Capacity: Silencer Model & Quantity: EXSY1 (1)
l (US gal) 17.5 (4.6) 17.5 (4.6) Pressure Drop Across
Water Pump Type: Centrifugal Silencer System: kPa (in Hg) 2.10 (0.620) 3.56 (1.051)
Heat Rejected to Water & Silencer Noise Reduction
Lube Oil: kW (Btu/min) Level: dB 22 17
-Standby: 50.7 (2883) 64.0 (3640) Max. Allowable Back
-Prime: 46.1 (2622) 57.7 (3281) Pressure: kPa (in. Hg) 18.0 (5.3) 15.0 (4.4)
Heat Radiation to Room: Heat radiated from engine and alternator Exhaust Gas Flow:
kW (Btu/min) -Standby: 15.3 (870) 17.7 (1007) m/min (cfm) -Standby: 16.3 (576) 20.4 (720)
-Prime: 13.7 (779) 15.7 (893) -Prime: 15.2 (537) 18.4 (650)
Radiator Fan Load: kW (hp) 2.8 (3.8) 4.8 (6.4) Exhaust Gas Temperature: C (F)

Cooling system designed to operate in ambient conditions up to 50C -Standby: 543 (1009) 574 (1065)
(122F). Contact your local Cat dealer for power ratings at specific site -Prime: 514 (957) 517 (963)
conditions.




DIESEL GENERATOR SET

Generator Performance Data

50 Hz 60 Hz
Data Item 415/240V 400/230V 380/220V 220/127V 480/277V 380/220V 240/120V 230/115V 440/254V
230/115V 220/110V 240/139V 220/110V 208/120V 220/127V
200/115V

Motor Starting
Capability* kVA 256 240 220 282 280 187 219 205 242

Short Circuit
Capacity** % 300 300 300 300 300 300 300 300 300

Reactances:
Per Unit

Xd 2.666 2.870 3.180 2.372 2.702 4.312 3.598 3.891 3.216

X'd 0.120 0.129 0.143 0.107 0.121 0.194 0.162 0.175 0.145

X''d 0.072 0.077 0.086 0.064 0.073 0.116 0.097 0.105 0.087

Reactances shown are applicable to prime ratings.

*Based on 30% voltage dip at 0.6 power factor and SHUNT excitation system.
** With optional Permanent Magnet generator.

Generator Technical Data

Physical Data Operating Data

 Overspeed: RPM 2250

Model: LC3114F Voltage Regulation: (steady state) +/- 0.5%

No. of Bearings: 1 Wave Form NEMA = TIF: 50

Insulation Class: H Wave Form IEC = THF: 2.0%

Winding Pitch - Code: 2/3 - 6 Total Harmonic Content LL/LN: 2.0%

Suppression is in line with European

Wires: 12 Radio Interference: Standard EN61000-6

Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)

Excitation System: -50 Hz: 7.8 (444)

SHUNT

-60 Hz: 8.3 (472)

AVR Model: R250




DIESEL GENERATOR SET

Technical Data

Voltage Voltage
Prime Standby Prime Standby
50 Hz 60 Hz
kVA kW kVA kW kVA kW kVA kW

415/240V 100.0 80.0 110.0 88.0 480/277V 113.0 90.4 125.0 100.0
400/230V 100.0 80.0 110.0 88.0 220/127V 113.0 90.4 125.0 100.0
380/220V 100.0 80.0 110.0 88.0 380/220V 113.0 90.4 125.0 100.0
230/115V 100.0 80.0 110.0 88.0 240/120V 113.0 90.4 125.0 100.0
220/127V 100.0 80.0 110.0 88.0 230/115V 113.0 90.4 125.0 100.0
220/110V 100.0 80.0 110.0 88.0 440/254V 113.0 90.4 125.0 100.0
200/115V 100.0 80.0 110.0 88.0 220/110V 113.0 90.4 125.0 100.0
208/120V 113.0 90.4 125.0 100.0
240/139V 113.0 90.4 125.0 100.0

Weights & Dimensions

Weights: kg (lb) Dimensions: mm (in)

Net (+ lube oil) 1129 (2490) Length 2089 (82.2)

Wet (+ lube oil & coolant) 1147 (2529) Width 1120 (44.1)
Fuel, lube oil & coolant 1358 (2994) Height 1375 (54.1)

Note: General configuration not to be used

for installation. See general dimension
drawings for detail.

Definitions General Data

Standby Rating Documents



  
 
   
   A full set of operation and maintenance manuals and circuit wiring
   !
 "# $ &
   " diagrams.
'   "
  
$ +#
 
 "  "

;!
<!!<#"
="
$
Quality Standards
Prime Rating The equipment meets the following standards: IEC60034-1,
Output available with varying load for an unlimited time. Average IEC60034-22, ISO3046, ISO8528, NEMA MG 1-32,
power output is 70% of the prime power rating. Typical peak NEMA MG 1-33, 2004/108/EC, 2006/42/EC, 2006/95/EC.
demand is 100% of prime rated ekW with 10% overload capability
for emergency use for a maximum of 1 hour in 12.
Overload opeation cannot exceed 25 hours per year.

.
Standard Reference Conditions
Note: Standard reference conditions 25C (77F) air inlet temp,
100m (328ft) A.S.L. 30% relative humidity. Fuel consumption data
at full load with diesel fuel with specific gravity of 0.85 and
conforming to BS2869: 1998, Class A2.

www.Cat-ElectricPower.com
>!
#?$@> J&;> JK
2014 Caterpillar
Q
 @ JZ [; JZ \; JZJ; JZJ[ All rights reserved.
Materials and specifications are subject to change without notice.
]$&$?!@JJ[J\J;JJ[J\J
The International System of Units (SI) is used in this publication.
^#@
 
^# CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," the
"Power Edge" trade dress, as well as corporate and product
_[`jJ{
identity used herein, are trademarks of Caterpillar and may not be
used without permission.