www.FGWilson.

com

P2000/P2250E
Image for illustration purposes only.

Output Ratings Ratings and Performance Data

Voltage, Frequency Prime Standby Engine Make & Model: Perkins® 4016TAG2A
400V, 50 Hz 2000.0 kVA / 1600.0 kW 2250.0 kVA / 1800.0 kW Alternator manufactured for
Leroy Somer
FG Wilson by:
- / - - / -
Alternator Model: LL9324H
Ratings at 0.8 power factor. Control Panel: DCP-10

Please refer to the output ratings technical data section for Base Frame: Heavy Duty Fabricated Steel
specific generator set outputs per voltage. Circuit Breaker Type: / 3 Pole ACB-Option
Frequency: 50 Hz 60 Hz
Engine Speed: rpm 1500 -
Prime Rating
These ratings are applicable for supplying continuous electrical power Fuel Tank Capacity:
(at variable load) in lieu of commercially purchased power. There is no -
litres (US gal)
limitation to the annual hours of operation and this model can supply 10%
Fuel Consumption: l/hr (US gal/hr)
overload power for 1 hour in 12 hours.
(100% Load) - Prime 425.7 (112.5) -
Standby Rating
These ratings are applicable for supplying continuous electrical power (at - Standby 486.8 (128.6) -
variable load) in the event of a utility power failure. No overload is
permitted on these ratings. The alternator on this model is peak
continuous rated (as defined in ISO 8528-3).
Available Options
Standard Reference Conditions
Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m FG Wilson offer a range of optional features to tailor our generator
(328 ft) A.S.L. 30% relative humidity. sets to meet your power needs. Options include:
Fuel consumption data at full load with diesel fuel with specific gravity of z Upgrade to CE Certification
0.85 and conforming to BS2869: 1998, Class A2.
z A wide range of Sound Attenuated Enclosures
z A variety of generator set control and synchronising panels
z Additional alarms and shutdowns
z A selection of exhaust silencer noise levels
For further information on all of the standard and optional features
accompanying this product please contact your local Dealer or visit:
www.FGWilson.com

Dimensions and Weights

Length (L) Width (W) Height (H) Dry Wet

mm (in) mm (in) mm (in) kg (lb) kg (lb)

5799 (228.3) 2298 (90.5) 3068 (120.8) 15135 (33367) 15451 (34064)

Dry = With Lube Oil Wet = With Lube Oil and Coolant

Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1.22.
Generator set pictured may include optional accessories.
 Engine Technical Data Air Systems 50 Hz 60 Hz

No. of Cylinders / Alignment: 16 / Vee Air Filter Type: Replaceable Element

Cycle: 4 Stroke Combustion Air Flow: m³/min (cfm)

Bore / Stroke: mm (in) 160.0 (6.3)/190.0 (7.5) - Prime 137.0 (4838) -

Turbocharged Air To Air - Standby 145.0 (5121) -
Induction:
Charge Cooled
Max. Combustion Air Intake
Restriction: kPa (in H2O) 3.7 (14.9) -
Cooling Method: Water
Governing Type: Electronic
Governing Class: ISO 8528
Compression Ratio: 13.6:1
Cooling System 50 Hz 60 Hz
Displacement: l (cu. in) 61.1 (3730.0)
Cooling System Capacity: l (US gal) 316.0 (83.5) -
Moment of Inertia: kg m² (lb/in²) 20.72 (70803)
Water Pump Type: Centrifugal
Engine Electrical System:
Heat Rejected to Water & Lube Oil:
- Voltage / Ground 24/Negative
kW (Btu/min) - Prime 660.0 (37534) -
- Battery Charger Amps 40
- Standby 721.0 (41003) -
Weight: kg (lb) - Dry 5570 (12280)
Heat Radiation to Room: Heat radiated from engine and alternator
- Wet 5847 (12890) kW (Btu/min) - Prime 192.5 (10947)
- Standby 224.8 (12784)

Radiator Fan Load: kW (hp) 63.5 (85.2) -

Performance 50 Hz 60 Hz Radiator Cooling Airflow: m³/min (cfm) 2058.0 (72678) -

External Restriction to
Engine Speed: rpm 1500 - 250 (1.0) -
Cooling Airflow: Pa (in H2O)
Gross Engine Power: kW (hp)
Designed to operate in ambient conditions up to 50°C (122°F).
- Prime 1766.0 (2368.2) - Contact your local FG Wilson Dealer for power ratings at specific site conditions.

- Standby 1937.0 (2597.6) -

BMEP: kPa (psi)

- Prime 2311.1 (335.2) - Lubrication System

- Standby 2535.2 (367.7) - Oil Filter Type: Spin-On, Full Flow

Total Oil Capacity: l (US gal) 238.0 (62.9)
Oil Pan: l (US gal) 214.0 (56.5)
Oil Type: API CG4 15W-40

Fuel System Oil Cooling Method: Water

Fuel Filter Type: Replaceable Element

Recommended Fuel: Class A2 Diesel or BSEN590
Fuel Consumption: l/hr (US gal/hr) Exhaust System 50 Hz 60 Hz
110% 100% 75% 50% Maximum Allowable Back Pressure: 6.6 (1.9) -
kPa (in Hg)
Prime Load Load Load Load
Exhaust Gas Flow: m³/min (cfm)
50 Hz 486.8 (128.6) 425.7 (112.5) 313.1 (82.7) 213.0 (56.3)
- Prime 411.0 (14514) -
60 Hz - - - -
- Standby 411.0 (14514) -
Exhaust Gas Temperature: °C (°F)
100% 75% 50%
Standby Load Load Load - Prime 480 (896) -

50 Hz 486.8 (128.6) 353.9 (93.5) 236.8 (62.6) - Standby 480 (896) -

60 Hz - - -

(Based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869,
Class A2)
Alternator Physical Data Alternator Operating Data

Manufactured for FG Wilson by: Leroy Somer Overspeed: rpm 2250

Model: LL9324H Voltage Regulation: (Steady state) +/- 0.5%
No. of Bearings: 1 Wave Form NEMA = TIF: 50
Insulation Class: H Wave Form IEC = THF: 2.0%
Winding Pitch Code: 2/3 - 6S Total Harmonic content LL/LN: 3.5%
Suppression is in line with European
Wires: 6 Radio Interference: Standard EN61000-6
Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)
Excitation System: AREP - 50 Hz 74.8 (4254)
AVR Model: R449 - 60 Hz -

Alternator
50 Hz 60 Hz
Performance Data:

Data Item 415/240V 400/230V 380/220V

Motor Starting
6816 6351 5754
Capability* kVA

Short Circuit
300 300 300
Capacity** %

Reactances: Per Unit

Xd 3.170 3.413 3.781
X'd 0.244 0.263 0.291
X"d 0.128 0.138 0.152

Reactances shown are applicable to prime ratings.

*Based on 30% voltage dip at 0.4 power factor.
**With optional permanent magnet generator.

Output Ratings Technical Data 50 Hz Output Ratings Technical Data 60 Hz

Voltage Prime: Standby: Voltage Prime: Standby:
kVA kW kVA kW kVA kW kVA kW
415/240V 2000.0 1600.0 2250.0 1800.0

400/230V 2000.0 1600.0 2250.0 1800.0

380/220V 2000.0 1600.0 2250.0 1800.0

General Information

Documentation

A full set of operation and maintenance manuals and circuit wiring diagrams.

Generator Set Standards

The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22.

FG Wilson is a fully accredited ISO 9001 company.

Warranty

All prime equipment carries a one year manufacturer's warranty. Standby equipment, limited to 500 running hours per year, has a two year manufacturer's

warranty. For details on warranty cover please contact your local Dealer, or visit our website: FGWilson.com.

Dealer contact details:

FG Wilson manufactures product in the following locations:

Northern Ireland • Brazil • China • India • USA
With headquarters in Northern Ireland, FG Wilson operates through a Global Dealer Network.
To contact your local Sales Office please visit the FG Wilson website at www.FGWilson.com.
FG Wilson is a trading name of Caterpillar (NI) Limited.
In line with our policy of continuous product development, we reserve the right to change specification without notice. P2000 / P2250E/4PP/1115/GB