Standard and optional equipment Features

Standard equipment Linde hydrostatic transmission Robust chassis

3 No clutch, no reversing gears and none of 3 Enclosed chassis for maximum
the costs associated with these strength and component protection
General Safety components 3 Prevents ingress of dust and water
Linde hydrostatic transmission Three independent braking systems 3 Safe, rapid direction changes, with no 3 Low profile design for good
Liquid cooled engine: Asbestos-free brake components component stress or wear all-round visibility
3 The perfect system for intensive shunting 3 Low step access to spacious cab
VW/ADG diesel version Electric horn
and transfer duties 3 Compact, profiled design for
VW/ADF LPG version Hydraulic overload protection 3 No direction or gear lever for effortless excellent manoeuvrability
Two stage catalytic converter (LPG) Burst hose check valve productivity from the operator
Hydrostatic power steering Overhead guard 3 Automatic hydrostatic braking as

Illustrations and technical details non-binding for actual manufacture. All dimensions subject to manufacturing tolerances.
accelerator pedal is released
Dual axis hydraulic control lever Seat belt
Linde twin accelerator pedals
Full suspension PVC seat with seat belt
Pneumatic tyres (H 12/H 16)
Superelastic tyres (H 18/H 20)
Instrument display including hour meter
Clearview standard mast lift 3050 mm
Linde twin accelerator pedals Smooth hydraulic control Modern low emission engines
Fork length 1000 mm 3 Assured manoeuvring with Linde twin 3 A dual axis tactile lever actuates lift 3 Powerful yet fuel efficient
Standard colour scheme vermilion and charcoal grey accelerator pedals and tilt 3 Available in either diesel or LPG versions

The manufacturerreserves the right to alter specifications without notice.

Diesel and LPG Counterbalance Trucks 3 Effortless forward/reverse selection 3 Effortless, seamless control of all mast 3 Modern low emission, low noise design
places minimal demands on operator movements 3 Provides impressive, responsive
Capacity 1200 kg 2000 kg 3 Operator is able to maintain high 3 Automatic engine speed control as lift performance
efficiency and productivity levels lever is actuated results in reduced
H 12, H 16, H18, H 20 SERIES 350 engine rpm, lower fuel consumption and
longer engine life

Options

Standard mast lifts to 4850 mm Engine air pre-filter (diesel)

Duplex mast lifts to 3770 mm Soot particulate filter (diesel)
Triplex mast lifts to 6220 mm Catalytic exhaust converter - two stage (diesel)
Single accelerator pedal layout with direction selector Catalytic exhaust converter - three stage (LPG)
Individual hydraulic control levers Alternative tyre types and configurations
Fabric covered seat Alternative fork lengths Designed around the operator Maximum uptime The Linde clearview mast
3 Spacious cab with easy access, a comfort- 3 Intelligent electronic control system 3 A clearview mast using a unique
Integrated sideshift Audible reversing alarm Introduction
class seat and an intuitive control layout 3 Easy access to all key components nesting design and with the lift
Load backrest extension Alternative colour schemes This versatile and highly manoeuvrable series of compact 3 Hydrostatic power steering for effortless 3 Up to1000 operating hours between cylinders mounted behind the uprights
Additional hydraulic circuits engine powered hydrostatic models has established an manoeuvring services for optimum strength and visibility
Truck lighting/flashing amber beacon/working lamps Other options available on request enviable reputation for efficient and economic load 3 Excellent visibility of load and surrounding 3 Reduced service intervals 3 Sealed for life angled rollers for
environment efficient alignment and minimum
Overhead guard with: handling in a wide range of tasks including loading/
3 Instrument display for instant read-out of friction provide smooth lifting and
Laminated glass top screen unloading, storage/retrieval, block stacking and rapid truck status lowering
Polycarbonate top screen load transfer. 3 Chassis designed and built for maximum 3 Safe, precise load handling
Front screen, wiper and top screen Durability strength and durability
3 Resiliently mounted cab is isolated from
Front and rear screens, wipers and top screen Performance Linde engine powered forklifts are constructed to undertake
vibrations and road shocks
Cab heater and screen demister The unique and well proven Linde hydrostatic drive sustained heavy-duty tasks in their stride. The enclosed robot-
Full cab with hinged doors combined with modern low emission engines provides welded chassis is designed for maximum strength and
Rear view mirrors smooth, infinitely variable speed control for flexible high durability. The rugged construction and components ensure

Printed in United Kingdom DM5192/3/06

performance and productivity in intensive applications. long life and durability.

Operator comfort Maximum uptime and productivity

A perfect interface between operator and truck has been Efficiency at work, efficiency in servicing. The low
achieved with the Linde ergonomic design concept. The maintenance hydrostatic transmission and automatic engine
spacious, resiliently mounted cab, comfort-class seat and speed control result in productive uptime ratios of up to 1000
Linde Material Handling (UK) Ltd
intuitive control layout creates a superb environment that hours between services. Operating costs are therefore reduced Kingsclere Road, Basingstoke, Hampshire RG21 6XJ
motivates and promotes efficiency and high productivity. and maximum productivity is achieved. Tel +44(0)1256 342000, Fax +44(0)1256 342923, www.linde-mh.co.uk, [email protected]
Technical data Lifting capacity diagrams

H 12
1200
1100
1.1 Manufacturer LINDE LINDE LINDE LINDE LINDE LINDE LINDE LINDE 1000
900
1.2 Model designation H 12 D H 12 T H 16 D H 16 T H 18 D H 18 T H 20 D H 20 T 800 5200
700
1.3 Power unit: battery, diesel, petrol, LP gas, mains power Diesel LPG Diesel LPG Diesel LPG Diesel LPG
Characteristics

5500
600
5800
1.4 Operation: manual, pedestrian, stand-on, seated, order picker Seated Seated Seated Seated Seated Seated Seated Seated 500 6000
6220
1.5 Load capacity Q (kg) 1200 1200 1600 1600 1800 1800 2000 2000 400

1.6 Load centre c (mm) 500 500 500 500 500 500 500 500 300
500 600 700 800 900 1000
1.8 Axle centre to fork face x (mm) 375 375 375 375 380 380 384 384 kg mm
1.9 Wheelbase y (mm) 1460 1460 1460 1460 1500 1500 1560 1560
2.1 Service weight kg 2525 2525 2660 2660 2890 2890 3110 3110
H 16
Weight

1600
2.2 Axle load with load, front / rear kg 3125/600 3125/600 3700/560 3700/560 4070/620 4070/620 4380/730 4380/730 1500
1400
1300
2.3 Axle load without load, front / rear kg 1230/1295 1230/1295 1175/1485 1175/1485 1250/1640 1250/1640 1280/1830 1280/1830 1200
3.1 Tyres, front / rear (SE = superelastic, P = pneumatic) SE/SE SE/SE SE/SE SE/SE SE/SE SE/SE SE/SE SE/SE 1100
1000 4300
Wheels and tyres

3.2 Tyre size, front 18 x 7 8 18 x 7 8 18 x 7 8 18 x 7 8 200/50 10 200/50 10 200/50 10 200/50 10 900 5000
5200
800 5400
3.3 Tyre size, rear 18 x 7 8 18 x 7 8 18 x 7 8 18 x 7 8 18 x 7 8 18 x 7 8 18 x 7 8 18 x 7 8 700 5650
3.5 Wheels, number front / rear (x = driven) 2 x/2 2 x/2 2 x/2 2 x/2 2 x/2 2 x/2 2 x/2 2 x/2 600
3.6 Track width, front b10 (mm) 910 910 910 910 945 945 945 945 500 600 700 800 900 1000
kg mm
3.7 Track width, rear b11 (mm) 873 873 873 873 873 873 873 873
4.1 Mast / fork carriage tilt, forward / backward a/b () 6/10 6/10 6/10 6/10 6/10 6/10 6/10 6/10 H 18
1800
4.2 Height of mast, lowered h1 (mm) 2100 2100 2100 2100 2100 2100 2100 2100
1600
4.3 Free lift h2 (mm) 150 150 150 150 150 150 150 150 1400
1300
4.4 Lift h3 (mm) 3050 3050 3050 3050 3050 3050 3050 3050
1200 4500
4.5 Height of mast, extended h4 (mm) 3658 3658 3658 3658 3658 3658 3658 3658 1100 5000
4.7 Height of overhead guard (cab) h6 (mm) 2070 2070 2070 2070 2070 2070 2070 2070 1000
5300
900
4.8 Height of seat / stand-on platform h7 (mm) 1000 1000 1000 1000 1000 1000 1000 1000
800 5650
4.12 Towing coupling height h10 (mm) 560 560 560 560 560 560 560 560 500 600 700 800 900 1000
kg mm
4.19 Overall length l1 (mm) 3174 3174 3220 3220 3260 3260 3346 3346
Dimensions

4.20 Length to fork face l2 (mm) 2174 2174 2220 2220 2260 2260 2346 2346
H 20
4.21 Overall width b1/b2 (mm) 1087 1087 1168 1087 1168 1168 1168 1168 2000
1800
4.22 Fork dimensions s/e/l (mm) 40 x 80 x 1000 40 x 80 x 1000 40 x 80 x 1000 40 x 80 x 1000 45 x 100 x 1000 45 x 100 x 1000 45 x 100 x 1000 45 x 100 x 1000
1600
4.23 Fork carriage to DIN 15173, class /form A, B 2A 2A 2A 2A 2A 2A 2A 2A 1400
1300 4700
4.24 Width of fork carriage b3 (mm) 1040 1040 1040 1040 1040 1040 1040 1040 1200
5000
1100
4.31 Ground clearance, mast m1 (mm) 76 76 74 74 98 98 77 77 5200
1000
5400
4.32 Ground clearance, centre of wheelbase m2 (mm) 121 121 120 120 119 119 122 122 900
5650
4.33 Aisle width, pallet 1000 x 1200 across forks Ast (mm) 3523 3523 3565 3565 3606 3606 3689 3689 800
500 600 700 800 900 1000
4.34 Aisle width, pallet 800 x 1200 along forks Ast (mm) 3723 3723 3765 3765 3806 3806 3889 3889 kg mm
4.35 Turning radius Wa (mm) 1948 1948 1990 1990 2026 2026 2105 2105 Lifting capacity diagrams are valid for standard and duplex masts
4.36 Minimum pivot point distance b13 (mm) 590 590 590 590 605 605 630 630 without integrated sideshift with SE-tyres.
5.1 Travel speed, with / without load km/h 18/18.5 18/18.5 18/18.5 18/18.5 18/18.5 18/18.5 18/18.5 18/18.5
5.2 Lifting speed, with / without load m/s 0.57/0.58 0.57/0.58 0.57/0.58 0.57/0.58 0.57/0.58 0.57/0.58 0.57/0.58 0.57/0.58
Performance

5.3 Lowering speed, with / without load m/s 0.58/0.45 0.58/0.45 0.57/0.45 0.57/0.45 0.53/0.45 0.53/0.45 0.59/0.45 0.59/0.45
5.5 Tractive force, with / without load, 60 minute rating N 14200/9220 14200/9220 14200/9220 14200/9220 14200/9220 14200/9220 14200/9220 14200/9220 Standard mast
5.7 Climbing ability, with / without load, 30 minute rating % 42/30 42/30 34/26 34/26 31/26 31/26 31/26 31/26 Lift h3 3050 3250 3850 4250 4850
5.9 Acceleration time, with / without load (first 15 m) s 4.5/4.0 4.5/4.0 4.8/4.2 4.8/4.2 4.9/4.4 4.9/4.4 5.0/4.5 5.0/4.5 Height of mast, lowered (including 150 mm free lift) h1 2100 2200 2500 2700 3000
Height of mast, extended h4 3658 3858 4458 4858 5458
5.10 Service brake Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic
Free lift h2 150 150 150 150 150
7.1 Manufacturer of engine / type VW/ADG VW/ADF VW/ADG VW/ADF VW/ADG VW/ADF VW/ADG VW/ADF
7.2 Engine rated power to ISO 1585 kW 28 27 28 27 28 27 28 27 Duplex mast
Drive

7.3 Rated speed min1 2300 2300 2300 2300 2300 2300 2300 2300 Lift h3 2770 3070 3770
7.4 Number of cylinders / displacement cm3 4/1896 4/1781 4/1896 4/1781 4/1896 4/1781 4/1896 4/1781 Height of mast, lowered h1 1925 2075 2425
7.5 Fuel consumption to VDI l/h 2.1 2.1 2.2 2.2 2.3 2.3 2.4 2.4 Height of mast, extended h4 3378 3678 4378
Free lift h2 1318 1468 1818
8.1 Type of drive control Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission
8.2 Working pressure for attachments bar 175 175 215 215 230 230 250 250
Triplex mast
Other

8.3 Oil flow for attachments l/min 18 18 18 18 18 18 18 18

Lift h3 4020 4470 5470 5920 6220
8.4 Noise level at operators ear dB(A) 79 76 79 76 79 76 79 76 Height of mast, lowered h1 1925 2075 2475 2625 2725
8.5 Towing coupling, design / type Height of mast, extended h4 4628 5078 6078 6528 6828
Free lift h2 1318 1468 1868 2018 2118
All data based on standard equipment with standard mast 3050 mm (h3)

Alternative lift heights available on request. Lift height = h3+s.