A Prepaid Water Control Circuit System For Water Supply

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 3

A PREPAID WATER CONTROL CIRCUIT SYSTEM FOR WATER

SUPPLY

AIM:

The main aim of the project is to supply the water based on prepaid card and user time
period.

PURPOSE:

The purpose of the project is to stop the wastage of water and implement prepaid bill to
municipality department.

MOTOR CONTROL SECTION:

POWER
LCD DISPLAY
SUPPLY
(16 X 2 LINES)
SMART MAX
CARD 232 MICRO
READER CONTROLLER
RELAY
AT89S52
RTC

KEYS MOTOR
PUMP

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 /
040 44433434
POWER SUPPLY:

STEP DOWN BRIDGE FILTER REGULATOR

TRANSFORMER RECTIFIER CIRCUIT SECTION

DESCRIPTION:

Water supply and control is a very huge and vast network in any city and maintaining
and running it takes a lot of effort. In large cities and industries where supply and distribution
tanks are at a large distance from water control station, it is very difficult situation to monitor
and control the water tanks. Extra manpower and time is needed to do this work. By using
this project wastage of water can be controlled and can save the water. This project is also
helpful for the municipality for paying the water bills using smart card reader.
Here in this project we are proposing a system that how to save water and payment of
water by prepaid billing, we are designing a system with time based auto turn ON or OFF
motor pump using simple and low cost device.

In this project we have a smart card reader to read the prepaid cards of the user. The
user has to recharge the card and maintain sufficient amount so that he /she can use the water.
First we need to place the smartcard in smartcard reader and it will read by micro controller,
if it have sufficient amount then we can turn on the water pump using keys. Microcontroller
will switch ON the circuit and motor pump will ON. If the card does not have sufficient
balance then motor will not turn ON. RTC is used to set the time for water supply to turn ON
or OFF.

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 /
040 44433434
HARDWARE COMPONENTS:

1. Microcontroller (AT89S52)
2. LCD Display (16x2 lines)
3. Max 232
4. Smart card reader
5. RTC
6. Keys
7. Relay
8. Motor pump

SOFTWARE:

1. Kiel U vision
2. Express PCB
3. ISP

ADVANTAGES:

1. Industrial applications
2. No range limitation
3. Anyone can access

APPLICATIONS:

1. Industrial applications
2. Home application
3. Heavy load carrier belts

RESULT:

Hence we implemented a prepaid water control circuit system for water supply based
on time.

Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 /
040 44433434

You might also like