Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    SVL488 Stainless Steel Safety Valve For Clean Service Applications-Technical Information

    Uploaded by

    hippong niswantoro
    tool

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SVL488 Stainless Steel Safety Valve For Clean Service Applications-Technical Information

    Uploaded by

    hippong niswantoro
    122 views5 pages
    tool

    Original Title

    SVL488 Stainless Steel Safety Valve for Clean Service Applications-Technical Information

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    tool

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    122 views5 pages

    SVL488 Stainless Steel Safety Valve For Clean Service Applications-Technical Information

    Uploaded by

    hippong niswantoro
    tool

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Local regulations may restrict the use of this product to below the conditions quoted.

    In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright 2014

    TI-P315-03

    CH Issue 7

    SVL488
    Stainless Steel
    Safety Valve for Clean Service Applications
    Description

    The SVL488 is a soft seated stainless steel, full lift, TV approved


    safety valve suitable for steam, gas and liquid applications.
    Applications
    The SVL488 is suitable for the overpressure protection of low
    pressure steam equipment, pipelines and pressure vessels,
    particularly within the brewing and beverage industries where
    extremely high standards of hygiene and cleanliness are required
    to maintain product quality and to minimise contamination of the
    process media.
    Available types
    Two main variations of the valve are available:
    SVL488-B with a sealed cap for liquid service.
    SVL488-C with a packed easing lever for steam (or other services
    where a lever is specified).
    Note: Both designs have a closed bonnet and EPDM soft seat seal
    and bellows as standard.
    Certification
    A manufactures' Typical Test Report is provided as standard for
    each valve including valve set and hydraulic pressure. Also
    available on request is material certification in accordance with
    EN 10204 3.1.
    Standards and approvals
    Approved by the TV to AD Merkblatt A2, TRD 421 and Vd TV
    SV100.
    The requirements of the European Pressure Equipment
    Directive, 97/23/EC have been satisfied and the valve belongs
    to Category 4, having been designed for use with fluids in
    Group 1 and 2 (gases and liquids). Always consult Spirax Sarco for
    fluid compatibility.

    Sizes and end connections

    Nominal inlet size DN 25 40 50 65 80 100


    Nominal outlet size DN 40 65 80 100 125 150
    Inlet clamp
    inch 1 2 2
    3 4 4
    Outlet clamp
    inch
    2 3 4 4
    5 6
    Pipe connections: Valves are available with flanged DIN 2633
    PN16 or sanitary clamp ISO 2852 (ISO 2037 pipe standard)
    connections. Please state connection required when placing an
    order.

    Optional extras

    The standard inlet wetted surface finish is 0.75 m Ra. Other finishes
    are available on request - Please contact Spirax Sarco.

    Page 1 of 5

    11

    7
    5
    EPDM soft seat seal
    6

    10

    12
    4
    14
    13
    3
    2

    Materials

    No. Part
    1 Body
    2 Seat

    Disc
    3
    Disc 'O' ring
    4 Guide/bush
    5 Bonnet
    6 Stem
    7 Spring plates (2)
    Adjustment screw
    8

    with bush
    9 Cap
    10 Spring
    11 Packed lever
    12 Clamp
    13 Bellows
    14 Body gasket

    TI-P315-03 CH Issue 7

    Material
    Stainless steel
    Stainless steel
    Stainless steel
    EPDM (FDA approved)
    Stainless steel
    Stainless steel
    Stainless steel
    Stainless steel
    Stainless steel
    PTFE + 15% glass
    Stainless steel
    Stainless steel
    Stainless steel
    Stainless steel
    EPDM (FDA approved)
    Laminated graphite

    1.4404
    1.4404
    1.4404
    1.4404/PTFE + 15% Glass
    1.4404
    1.4404
    1.4404
    1.4404

    SVL488 Stainless Steel Safety Valve for Clean Service Applications

    1.4404
    1.4310
    1.4404
    1.4401

    Page 2 of 5

    Pressure/temperature limits
    Temperature C

    
    Steam
    saturation
    curve

    
    
    
    

    
    
    
    Pressure bar g

    

    

    

    The product must not be used in this region.

    Body design conditions


    Maximum

    Maximum

    DN25 and DN40


    PN16
    16 bar g

    Minimum

    0.1 bar g
    15 bar g

    DN50

    Minimum
    Set pressure range


    Maximum
    DN65 and DN80

    Minimum

    Maximum

    With EPDM soft seat

    Maximum

    DN100

    Temperature

    All versions

    0.2 bar g
    10.34 bar g
    0.1 bar g
    8.2 bar g

    Minimum

    0.1 bar g
    150C

    Minimum

    -45C


    Overpressure

    Steam, gas

    Maximum

    10%

    Liquid

    Maximum

    10%



    Performance data
    Blowdown limits

    Steam, gas

    Maximum

    10%

    Liquids

    Maximum

    20%

    Steam, gas
    Derated coefficient of
    discharge values d Liquid

    0.70
    0.45

    Maximum permitted backpressure

    10% of set pressure

    Designed for a maximum inlet cold hydraulic test pressure of:

    24 bar g

    Table 1 - SVL488 flow capacity for dry saturated steam in kilogrammes per hour (kg/h)
    (calculated at 10% overpressure. In accordance with EN ISO 4126)
    Valve size DN in/out
    Flow diameter (mm)

    Flow area (mm)

    DN25/40
    DN40/65
    DN50/80
    DN65/100
    DN80/125
    DN100/150
    23 37 46 60 74 92
    416
    1075
    1662
    2827
    4301
    6648


    Dry saturated steam, kg/h
    Set pressure (bar g)
    0.2
    151 390 604 1027 1562 2415
    0.5
    214 554 857 1457 2217 3427
    1.0
    319
    825
    1275
    2169
    3300
    5100
    2.0
    504
    1303
    2015
    3427
    5213
    8058
    3.0
    678
    1751
    2707
    4605
    7006
    10829
    4.0
    843
    2177
    3366
    5726
    8711
    13465

    TI-P315-03 CH Issue 7

    SVL488 Stainless Steel Safety Valve for Clean Service Applications

    Page 3 of 5

    Table 2
    SVL488 flow capacity for air or normal cubic meters per hour (Nm3/h) at 0C and 1013 mbar
    (calculated in accordance with AD-MERKBLATT A2 and TRD 421)
    Valve size DN in/out

    Flow area (mm)

    25/40
    416

    40/65
    1075

    50/80
    1662

    65/100
    2827

    Set pressure (bar g)


    Flow capacity for air Nm3 /h
    1.0
    386
    999
    1545
    2628
    2.0
    625
    1617
    2499
    4251
    3.0
    852
    2204
    3406
    5795
    4.0
    1069
    2768
    4278
    7278
    5.0
    1287
    3331
    5149
    8761
    6.0
    1505
    3895
    6021
    10243
    7.0
    1723
    4459
    6892
    11726
    8.0
    1941
    5023
    7763
    13208
    8.2
    1985
    5136
    7937
    13505
    9.0
    2159
    5587
    8635
    14691
    10.0
    2377
    6150
    9506
    16173
    10.34
    2451
    6334
    9793
    16658
    12.0
    2812
    7278
    11249
    14.0
    3248
    8405
    12992
    15.0
    3466
    8957
    14735
    16.0
    3684
    9533

    80/125
    4301

    100/150
    6648

    3998
    6467
    8816
    11071
    13326
    15581
    17836
    20091
    20542
    22346
    24601
    25343

    6179
    9995
    13626
    17111
    20597
    24083
    27568
    31054
    31752

    The product must not be used in this region

    Table 3 - SVL488 flow capacity for water in kilogrammes per hour (kg/h) at 20C
    (calcualted in accordance with AD-MERKBLATT A2 and TRD 421 at 10% overpressure)
    Derated coefficient of discharge (Kdr) = 0.52
    Valve size DN in/out

    Flow area (mm)

    25/40
    416

    40/65
    1075

    Set pressure (bar g)


    1.0
    9970
    25800
    2.0
    14100
    36500
    3.0
    17300
    44700
    4.0
    19900
    51600
    5.0
    22300
    57700
    6.0
    24400
    63200
    7.0
    26400
    68300
    8.0
    28200
    73000
    8.2
    28500
    73900
    9.0
    29900
    77400
    10.0
    31500
    81600
    10.34
    32000
    82700
    12.0
    34600
    89400
    14.0
    37300
    96600
    15.0
    38600
    99700
    16.0
    39900
    103000

    50/80
    1662

    65/100
    2827

    Flow capacity for water kg/h


    39900
    67900
    56400
    96000
    69100
    118000
    79800
    136000
    89200
    152000
    97700
    166000
    106000
    180000
    113000
    192000
    114000
    194000
    120000
    204000
    126000
    215000
    128000
    218000
    138000
    149000
    154000

    80/125
    4301

    100/150
    6648

    103000
    126000
    179000
    206000
    231000
    253000
    273000
    292000
    292000
    310000
    326000
    334000

    160000
    226000
    276000
    319000
    357000
    391000
    422000
    451000
    458000

    The product must not be used in this region

    TI-P315-03 CH Issue 7

    SVL488 Stainless Steel Safety Valve for Clean Service Applications

    Page 4 of 5

    Dimensions / weights (approximate) in mm and kg



    Valve size A
    B C


    DIN 2633 ISO 2852
    DIN 2633 ISO 2852
    SVL488B SVL488C
    Inlet Outlet
    Flanged Sanitary
    Flanged Sanitary
    sealed Packed lever

    PN16
    clamp
    PN16
    clamp
    cap design design
    DN25 DN40

    134 112

    DN40 DN65
    DN50 DN80

    Weight

    99 75

    264 332

    9.0

    170 147

    114 92

    398 518

    20.0

    170 147

    123 99

    406 534

    21.7

    DN65 DN100

    170 153

    132 109

    415 552

    26.5

    DN80 DN125

    195 178

    148 124

    496 640

    47.0

    DN100 DN150

    198 181

    166 149

    514 684

    56.0

    Safety information, installation and maintenance


    For full details see the Installation and Maintenance Instructions
    supplied with the product.
    Installation note:
    The safety valve should always be fitted with the centre line of the
    housing vertically above the line.

    SVL488 safety valve selection guide


    Model type

    SVL488

    SVL488

    Configuration B = Closed bonnet /sealed cap



    C = Closed bonnet /packed easing lever
    Seal material E = EPDM (FDA) 'O' ring and bellows
    Inlet
    PN16 = Flanged PN16
    connection
    T = Sanitary clamp, ISO 2582
    SVL488

    B

    E
    PN16

    PN16

    How to order

    Example: 1 off Spirax Sarco DN50 SVL488-B-E-PN16 safety


    valve with a set pressure of 10 bar g. (If the bellows is not required,
    please add 'without bellows').

    TI-P315-03 CH Issue 7

    SVL488 Stainless Steel Safety Valve for Clean Service Applications

    Page 5 of 5

    You might also like