Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Specifications Infusion Pump Te112

    Uploaded by

    puskesmas
    The document provides specifications for the Terufusion Infusion Pump TE-112. It details the pumping system, delivery rates and accuracy, volume delivered limits and functions, alarms, power supply requirements, dimensions, and standard accessories. Key specifications include a peristaltic finger pumping method, delivery rates from 1-300 mL/hr or 1-75 drops/min, volume delivery accuracy of ±10% or ±2%, and alarms for issues like air, occlusion, empty, and low battery.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Specifications Infusion Pump Te112

    Uploaded by

    puskesmas
    2K views2 pages
    The document provides specifications for the Terufusion Infusion Pump TE-112. It details the pumping system, delivery rates and accuracy, volume delivered limits and functions, alarms, power supply requirements, dimensions, and standard accessories. Key specifications include a peristaltic finger pumping method, delivery rates from 1-300 mL/hr or 1-75 drops/min, volume delivery accuracy of ±10% or ±2%, and alarms for issues like air, occlusion, empty, and low battery.

    Original Description:

    dox

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for the Terufusion Infusion Pump TE-112. It details the pumping system, delivery rates and accuracy, volume delivered limits and functions, alarms, power supply requirements, dimensions, and standard accessories. Key specifications include a peristaltic finger pumping method, delivery rates from 1-300 mL/hr or 1-75 drops/min, volume delivery accuracy of ±10% or ±2%, and alarms for issues like air, occlusion, empty, and low battery.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views2 pages

    Specifications Infusion Pump Te112

    Uploaded by

    puskesmas
    The document provides specifications for the Terufusion Infusion Pump TE-112. It details the pumping system, delivery rates and accuracy, volume delivered limits and functions, alarms, power supply requirements, dimensions, and standard accessories. Key specifications include a peristaltic finger pumping method, delivery rates from 1-300 mL/hr or 1-75 drops/min, volume delivery accuracy of ±10% or ±2%, and alarms for issues like air, occlusion, empty, and low battery.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SPECIFICATIONS INFUSION PUMP TE-112

    Product Name
    Model
    Pumping System
    Delivery Rate

    Accuracy
    1. mL/h control mode

    2. drops/min control mode


    Volume Delivered
    Delivery Limit range
    Purge flow function
    Alarms

    TERUFUSION INFUSION PUMP TE-112


    TE 112
    Peristaltic Finger Method
    Infusion sets: 15, 19 or 20 drops/mL
    3 to 300 mL/hours ( 1 mL/h steps )
    1 to 75 drops/min ( 1 drops/min steps )
    Infusion sets: 60 drops/mL
    1 to 100 mL/h ( 1 mL/h steps )
    1 to 100 drops/min ( 1 drops/min steps )
    10 % ( Using water or Sodium Chloride Solution and
    the recommended infusion set )
    2 % ( 10 minutes after the start of infusion, and
    after solution drips more than 500 times )
    : 0 to 9,999 mL
    0 9,999 mL ( 1 mL step ) or
    - - - - ( Delivery Limit Free )
    More than 300 mL/hours
    Air, Occlusion, Empty, Flow Error, Door, Low Battery,
    Free Flow, Battery Error, Drip Sensor Error

    Infusion Complete Function


    ( Completion )
    Alarm terminal

    Special Functions

    Occlusion Detection Pressure


    39,2 to 117,7 kPa ( 0.4 to 1.2 kgf/cm2 )
    Warning light or display and buzzer come on
    and pump stops except during Low Battery
    alarm
    When the total volume delivered reaches the preset
    delivery limit, light and buzzer sound notifies the
    operator
    Output an alarm relay contact ( Can be connected to
    nurse call )
    Contact rating: DC 24 Volt, 0.5 Ampere
    KEEP VEIN OPEN ( KVO ) function
    KVO function continues infusion at flow rate of
    3 mL/h after delivery limit ( preset volume )
    has been reached. When the drip volume is set
    to 60 drops/mL, KVO rate is 1 mL/h
    Tubing clamp function
    Tubing clamp squeezes infusion tubing shut
    when pump door is open
    Volume delivered clear function
    Holding down the [ mL CLEAR ] switch for
    about 0.5 second clears the volume delivered
    reading
    Volume memory function
    In the Memory Mode the previous delivery
    rate and delivery limit will be indicated on the
    display when the power is turned on. ( The

    Operating conditions
    Storage Conditions
    Power Supply

    Power Consumption
    Classification
    Dimensions
    Weight
    Standard Accessories

    mode can be changed by using the internal


    mode select switch )
    Repeat alarm function
    The repeat alarm function buzzer sounds again
    if no corrective action is taken within two
    minutes after the buzzer was switched off in
    the standard mode
    ( the mode can be changed by using the
    internal mode select switch )
    Start reminder alarm function
    The buzzer sounds when the pump is ready to
    deliver the solution but remains out of
    operation for two minutes in the standard
    mode. ( the mode can be changed by using the
    internal mode select switch )
    + 10 to +400 C, 30 to 85 % RH ( no condensation )
    Temperature : - 20 to +450 Celcius
    Humidity : 10 95 % RH ( no condensation )
    AC : 100 240 Volt, 50/60 Hz
    Internal Nickel Cadmium Battery can run the pump
    continously for about 2 hours. If the battery is new
    and the pump operates at the delivery rate of 25 mL/h
    after 12 hours charging with the power off
    Less than 16 VA ( Watt )
    Class I and Internal Power Supply
    Type CF, IPX1
    130 mm (W) x 180 mm ( H) x 136 mm ( D )
    Approx 2.3 kg
    AC Power Cord : 1 pcs
    Drip sensor : 1 pcs
    Time Lag Fuse : 2 pcs
    Instruction Manual : 1 pcs

    You might also like