Bondstrand 2000M/7000M for Marine & Offshore

1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements

Uses and Applications

Ballast
Chlorination
Drain
Cargo line
Sanitary service & sewage

Portable discharge line

Stripping lines
Tank cleaning (salt water)
Fire protection mains
Various other applications

A complete library of Bondstrand pipe and fittings in PDS and PDMS-format is available on CD-ROM. Please contact NOV Fiber
Glass Systems for details.
For specific fire protection requirements, an outer layer of passive fire protection is available.
For pipe systems without external pressure requirements, please contact your Bondstrand representative.

Approvals
In 1993, IMO (International Maritime Organization) issued Resolution A.753 (18) covering acceptance criteria for the use of plastic
pipe on ships. Major certifying bodies have adopted and implemented these Guidelines in their respective Rules and Regulations
for the Classification of Ships.
All Bondstrand pipe series used in the marine industry are designed and type-approved by the below major certifying bodies. (A
complete list is available, on request)
American Bureau of Shipping (ABS), U.S.A.;
Bureau Veritas, France;
Det Norske Veritas, Norway;
Germanischer Lloyd, Germany;
Lloyds Register, United Kingdom;
Nippon Kaiji Kyokai, Japan;
Registro Italiano Navale (RINA), Italy;
United States Coast Guard (USCG), U.S.A.

Characteristics
Maximum operating temperature: up to 93C. Higher temperature application is available, please consult NOV Fiber Glass Systems.
Pipe diameter: 1 - 40 inch (25-1000 mm).
Pipe system design for pressure ratings up to: 17.2 bar (250 psi) for 1 - 16 inch and 16.0 bar (232 psi) for 18 - 40 inch, depending
type of fittings, see contents for each fitting designated pressure rating.
ASTM D-2992 Hydrostatic Design Basis (Procedure B - service factor 0.5);
ASTM D-1599 Safety factor of 4:1. Design criteria for external pressure requirements are in accordance with IMO regulations.
Bondstrand 2000M
ASTM D-2310 Classification: RTRP-11FX for static hydrostatic design basis. Complies with ASTM F-1173 Classification and ASTM
D-2996 designation.
Bondstrand 7000M
ASTM D-2310 Classification: RTRP-11AX for static hydrostatic design basis. Complies with ASTM F-1173 Classification and ASTM
D-2996 designation.

Joining System

Quick-Lock joint
1-6 inch
Taper/Taper joint
8-40 inch

Quick-Lock adhesive-bonded joint

Taper/Taper adhesive-bonded joint

Thermosetting adhesive for bonded joints: Both Quick-Lock and Taper/Taper joints use PSX-34 and PSX-60 two-part
epoxy adhesives.

Table of Contents
Pipe Series .............................................................................................................

Joining System and Configuration .........................................................................

Typical Pipe Length ................................................................................................

Typical Pipe Dimensions and Weights ...................................................................

Typical Physical/Mechanical Properties ..............................................................

Ultimate Collapse Pressure ....................................................................................

Joint Dimensions Quick-Lock &Taper/Taper........................................................... 7-8

Span Length .......................................................................................................

Elbows ............................................................................................................... 10-11

Tees (Equal, Reducing).................................................................................. 12-18
Bushing Saddles ..................................................................................................

19

Laterals ..................................................................................................................

19

Reducers (Concentric, Eccentric)......................................................................... 20-21

Couplings ..............................................................................................................

22

Nipples ..................................................................................................................

22

Support Saddles ...................................................................................................

23

Grounding Saddles ...............................................................................................

24

Bell Mouths..................................................................................................

24

Assembly of Double O-Ring Expansion Joint .......................................................... 25

Expansion Coupling ............................................................................................... 25
Adapters ................................................................................................................

26

Adhesive ............................................................................................................

27

Engineering Design & Installation Data ................................................................. 28

Specials .................................................................................................................

28

Field Testing ........................................................................................................... 28

Conversions ..........................................................................................................

28

Pipe Series
Pipe
Filament-wound Glassfiber Reinforced Epoxy (GRE) pipe for Bondstrand adhesivebonding systems.
Fittings
A wide range of lined filament-wound Glassfiber Reinforced Epoxy (GRE) fittings for
Bondstrand adhesive-bonding systems. For special fittings, not listed in this product
guide, please contact your NOV FGS representative.
Flanges
Filament-wound Glassfiber Reinforced Epoxy (GRE) heavy-duty flanges and stub-end
ring flanges for Taper/Taper and Quick-Lock adhesive bonding systems. Standard flange
drilling patterns as per ANSI B16.5 (150 lb) for sizes 1 to 24 and ANSI B16.47, Series A
(150 lb.) for sizes 26 to 40. Other flange drilling patterns, such as ANSI B16.5 (>150
lb.), DIN, ISO and JIS are also available.
Bondstrand 2000M
Glassfiber Reinforced Epoxy (GRE) pipe system. Standard 0.5 mm internal resin-rich
reinforced liner. Maximum operating temperature: 93C (for higher temperature rating,
consult NOV Fiber Glass Systems).
Maximum pressure rating: 17.2 bar (250 psi) for 1 - 16 inch, 16.0 bar (232 psi) for 18 - 40 inch.
Minimum pressure: full vacuum.
External Pressure Requirements: In accordance with IMO Regulations.
Bondstrand 7000M (* conductive)
Glassfiber Reinforced Epoxy (GRE) pipe system. Maximum operating temperature: 93C
(for higher temperature rating, consult NOV Fiber Glass Systems) with comingled carbon
fibers.
Maximum pressure rating: 17.2 bar (250 psi) for 1 - 16 inch, 16.0 bar (232 psi) for 18 - 40 inch.
Minimum pressure: full vacuum.
External Pressure Requirements: In accordance with IMO Regulations.
* Conductive
Our conductive pipe systems have been developed to prevent accumulation of potentially
dangerous levels of static electrical charges. Pipe, fittings and flanges contain high strength
conductive filaments. Together with a conductive adhesive this provides an electrically
continuous system.
Description
Bondstrand 2000M
Bondstrand 7000M
Pipe diameter
1-40 inch
1-40 inch
Joining system
Quick-Lock 1-6 inch
Quick-Lock 1-6 inch

Taper/Taper 8-40 inch
Taper/Taper 8-40 inch
Liner(1)
0.5 mm
Temperature(2) 93C
93C
Pressure Rating(3)
17.2 bar (1-16 inch)
17.2 bar (1-16 inch)

16.0 bar (18-40 inch)
16.0 bar (18-40 inch)
Available without an internal liner
For temperature above 93C, please consult NOV Fiber Glass Systems
(3)
See fitting tables for specific pressure rating for individual fittings
(1)
(2)

Joining System &

Configuration

Pipe
25-150 mm (1-6 inch):
Quick-Lock (straight/taper) adhesive joint with integral pipe stop in bell end.
End configuration: Integral Quick-Lock bell end x shaved straight spigot.
200-1000 mm (8-40 inch):
Taper/Taper adhesive joint.
End configuration: Integral Taper bell x shaved taper spigot
Fitting and Flanges
25-150 mm (1-6 inch):
Quick-Lock (straight/ taper) adhesive joint with integral pipe stop in bell end.
End configuration: Integral Quick-Lock bell ends.
200-1000 mm (8-40 inch):
Taper/Taper adhesive joint.
End configuration: Integral Taper bell ends.
Note: (1)Pipe nipples, saddles and flanged fittings have different end configurations.
(1)

Tolerance +/- 50 mm

Typical Pipe Length

Nominal
Pipe Size

Joining
System

mm

in

Approximate
Overall Length
m

25-40

1-1

Quick-Lock

3.0

50-150

2-6

Quick-Lock

5.85/9.0

200-250

8-10

Taper/Taper

5.85/11.89

300-400

12-16

Taper/Taper

5.85/11.89

450-1000

18-40

Taper/Taper

11.89

Note: Overall length varies from plant to plant. Consult NOV Fiber Glass Systems
if exact overall length is required.

Typical Pipe
Dimensions
and Weights

Bondstrand 2000M

Nominal
Pipe Size

[mm]
[inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
550
22
600
24
650
26
700
28
750
30
800
32
900
36
1000
40

Pipe
Inside
Diameter
[mm]
27.1
42.1
53.0
81.8
105.2
131.9
159.0
208.8
262.9
313.7
337.6
385.8
433.8
482.1
530.3
578.6
650.0
700.0
750.0
800.0
900.0
1000.0

Bondstrand 7000M

Nominal
Pipe Size

[mm]
[inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
550
22
600
24
650
26
700
28
750
30
800
32
900
36
1000
40

Pipe
Inside
Diameter
[mm]
27.1
42.1
53.0
81.8
105.2
131.9
159.0
208.8
262.9
313.7
337.6
385.8
433.8
482.1
530.3
578.6
650.0
700.0
750.0
800.0
900.0
1000.0

Minimum
Structural Wall
Thickness [t]
[mm]
3.0
3.0
3.1
3.1
4.1
4.1
4.1
5.5
7.0
8.3
9.0
10.3
11.5
12.8
14.1
15.4
17.3
18.7
20.0
21.4
24.1
26.9

Average
Pipe
Weight
[kg/m]
0.7
1.3
1.3
1.8
3.1
3.5
4.6
7.4
12
17
19
25
32
39
49
56
66
75
93
102
132
165

Minimum
Struct. Wall
Thickness [t]
[mm]
3.5
3.5
3.6
3.6
4.6
4.6
4.6
5.5
7.0
8.3
9.0
10.3
11.5
12.8
14.1
15.4
17.3
18.7
20.0
21.4
24.1
26.9

Average
Pipe
Weight
[kg/m]
0.7
1.3
1.3
1.8
3.1
3.5
4.6
7.4
12
17
19
25
32
39
49
56
66
75
93
102
132
165

Outside diameters of pipe in 250 and 300 mm sizes exceed iron pipe dimensions of ISO
559-1977 (273 and 324 mm, respectively) and cast iron pipe dimensions of ISO 13-1 978
(274 and 326 mm, respectively).

Typical Mechanical Properties

Units

Value
21C

Value
93C

Hydrostatic Design Basis

N/mm2

161(1)

121

Ultimate Hoop Stress at Weeping

N/mm2

280

334

Circumferential
Hoop Tensile Strength

N/mm2

380

ASTM D2290

Hoop Tensile Modulus

N/mm

26700

16300

ASTM D2290

0.61

0.80

80

65

ASTM D2105

8550
0.42
9900

ASTM D2105
ASTM D2105
NOV FGS
ASTM D2925

11500

NOV FGS

Pipe Property

Poissons Ratio ha

(2)

Method

ASTM D2992, Proc. B

(20 years)
ASTM D1599

NOV FGS

Longitudinal

Axial Tensile Strength

N/mm2

Axial Strength Modulus

Poissons Ratio ah(3)
Axial Bending Strength
Axial Bending Modulus

N/mm

N/mm2
N/mm2

15500
0.35
85
15500

Shear Modulus

N/mm2

12100

Typical Physical Properties

Pipe Property

Units

Value

W/mC

0.33

Thermal Expansion @ 21C

Thermal Expansion @ 93C

Thermal Conductivity Pipe Wall

Flow Efficient, Hazen Williams

Absolute Roughness
Density
Specific Gravity

mm/mmC

18 x 10

ASTM D696

mm/mmC

24 x 10-6

ASTM D696

150

5.3 x 10

kg/m

-6

1800
1.8

Specific Heat

J/kgC

910

Grounding Resistance @ 500 Volt-Pipe

Grounding Resistance @ 500 Volt-Ftg.

ASTM D792
-

Ohm/m

-6

<1 x 10

ASTM D257

Ohm/ea

<1 x 10-6

ASTM D257

Volt

100

(1)

Value obtained at 65C

(2 )

ha = The ratio of axial strain to hoop strain resulting from stress in the hoop direction.
ah = The ratio of hoop strain to axial strain resulting from stress in the axial direction.

(3)

NOV FGS
-6

Shielding Capability

Method

Ultimate Collapse
Pressure

Ultimate short-term external failure pressure at 65C

Nominal Internal Pressure Static(1)

2000M
Pipe Size
[mm]
[inch]
[bar]
[bar]
25
1
17.2
702
40
1.5
17.2
191
50
2
17.2
105
80
3
17.2
29.2
100
4
17.2
31.9
125
5
17.2
16.2
150
6
17.2
9.3
200
8
17.2
9.9
250
10
17.2
10.2
300
12
17.2
10.1
350
14
17.2
10.3
400
16
17.2
10.3
450
18
16.0
10.1
500
20
16.0
10.2
550
22
16.0
10.2
600
24
16.0
10.3
650
26
16.0
10.3
700
28
16.0
10.4
750
30
16.0
10.3
800
32
16.0
10.4
900
36
16.0
10.4
1000
40
16.0
10.6
(1)

Quick-Lock
Dimensions

7000M
[bar]
742
198
108
29.7
32.4
16.4
9.4
10.0
10.3
10.1
10.3
10.4
10.2
10.2
10.3
10.3
10.3
10.4
10.3
10.4
10.5
10.6

Up to 93C.

Dimensions for Quick-Lock bell & spigot adhesive bonded joints

0,5

Nominal
Pipe Size

[mm] [inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6

Insertion Spigot Diameter Spigot Length

Depth
Min
Max
Max
Min
(Ds)
Sd
Sd
L
L
[mm]
[mm]
[mm]
[mm]
[mm]
27
32.6
32.9
28.5
31.0
32
47.5
47.8
33.5
36.0
46
59.2
59.6
49.0
52.0
46
87.6
88.0
49.0
52.0
46
112.5
112.9
49.0
52.0
57
139.5
139.9
58.5
61.5
57
166.2
166.6
59.0
62.0

Taper/Taper
Dimensions

Tapered spigot dimensions for adhesive bonded Taper/Taper joints

Sd

Nose

DS

Nominal
Taper
Insertion
Nominal
Pipe Size
Angle
Depth
Spigot
Nose Thickness

X
Ds
Nose
[mm]
[inch]
[degrees]
[mm]
[mm]
200
8
2.5
65
3.1
250
10
2.5
80
4.1
300
12
2.5
95
4.7
350
14
2.5
100
5.2
400
16
2.5
110
6.1
450
18
2.5
114
4.6
500
20
2.5
127
5.0
600
24
2.5
178
3.8
700
28
1.75
178
6.4
750
30
1.75
178
4.2
800
32
1.75
178
8.9
900
36
1.75
203
5.6
1000
40
1.75
320
8.1

Dia of
Spigot
at Nose
Sd
[mm]
215.0
271.0
323.0
348.0
398.0
443.0
492.2
586.3
712.9
758.4
817.8
911.3
1016.3

Span Length

Bondstrand 2000M

Nominal
Single
Continuous
Pipe Size
Span(1)
Span(1)
[mm]
[inch]
[m]
[m]
25
1
2.6
3.3
40
1.5
2.9
3.7
50
2
3.1
4.0
80
3
3.5
4.5
100
4
4.0
5.1
125
5
4.3
5.4
150
6
4.5
5.7
200
8
5.1
6.5
250
10
5.8
7.3
300
12
6.3
8.0
350
14
6.5
8.3
400
16
7.0
8.8
450
18
7.4
9.3
500
20
7.7
9.8
600
24
8.5
10.8
700
28
9.3
11.8
750
30
9.6
12.2
800
32
10.0
12.7
900
36
10.5
13.4
1000
40
11.1
14.1



Bondstrand 7000M

Nominal
Single
Continuous
Pipe Size
Span(1)
Span(1)
[mm]
[inch]
[m]
[m]
25
1
2.6
3.3
40
1.5
2.9
3.8
50
2
3.1
4.1
80
3
3.5
4.5
100
4
4.0
5.2
125
5
4.3
5.6
150
6
4.5
5.9
200
8
5.0
6.5
250
10
5.7
7.3
300
12
6.2
8.0
350
14
6.4
8.3
400
16
6.9
8.8
450
18
7.3
9.3
500
20
7.7
9.8
600
24
8.4
10.8
700
28
9.3
11.8
750
30
9.6
12.2
800
32
9.9
12.7
900
36
10.5
13.4
1000
40
11.1
14.1
(1)
Span recommendations are based on pipes filled with water having a density of 1000 kg/m3. No
provisions for the weight of valves, flanges or other heavy objects were considered in the calculations.
Note: ISO 14692 recommends a maximum support span length of 6.0 m.

Elbows 90

Quick-Lock

Taper/Taper

10

Filament-wound 90 elbows with integral Quick-Lock (1-6 inch) or T

aper/Taper (8-40 inch)
socket ends for adhesive bonding.
Nominal
Pipe Size

[mm]
[inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
550
22
600
24
650
26
700
28
750
30
800
32
900
36
1000
40

Laying
Length
(LL)
[mm]
65
81
76
114
152
195
229
315
391
472
364
402
458
508
559
584
660
711
762
813
915
1065

Overall Max. Working

Length
Pressure
(OL)
[mm]
[bar]
92
17.2
113
17.2
122
17.2
160
17.2
198
17.2
252
17.2
286
17.2
380
17.2
471
17.2
567
17.2
464
17.2
512
17.2
572
16.0
635
16.0
711
16.0
762
16.0
838
16.0
889
16.0
940
16.0
991
16.0
1118
16.0
1385
16.0

Average
Weight
[kg]
0.3
0.4
0.5
1.1
1.6
2.7
3.6
6.8
11
18
26
31
53
65
94
122
180
205
243
330
417
489

Elbows 45

Quick-Lock

Filament-wound 45 Quick-Lock (1-6 inch) and Taper/Taper (8-40 inch) socket ends for adhesive bonding.
Nominal
Pipe
Size
[mm]
[inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

Laying
Length
(LL)
[mm]
22
29
35
51
64
84
95
137
169
205
125
142
191
210
252
295
322
337
400
475

Overall
Length
(OL)
[mm]
49
61
81
97
110
141
152
202
249
300
225
252
305
337
430
473
500
515
603
798

Maximum
Working
Pressure
[bar]
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0

Average
Weight
[kg]
0.2
0.3
0.4
0.8
1.1
1.8
2.4
4.3
7.3
11.0
17.0
20.0
33
40
82
140
164
283
283
334

Taper/Taper

Elbows 22

Quick-Lock

Filament-wound 22 elbows with integral Quick-Lock (1-6 inch) and Taper/Taper (8-40 inch)
socket ends for adhesive bonding.
Nominal
Pipe
Size
[mm]
[inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
900
36
1000
40

Laying
Length
(LL)
[mm]
9
9
13
21
29
43
43
76
68
86
71
85
110
101
122
142
152
182
258

Overall
Length
(OL)
[mm]
36
41
59
67
75
100
100
141
148
181
171
195
224
228
300
320
330
385
578

Maximum
Working
Pressure
[bar]
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
16.0
16.0
16.0
16.0
16.0
16.0
16.0

Average
Weight
[kg]
0.1
0.2
0.5
0.7
1
1.4
1.9
3.9
5.9
10.4
12
14
23
28
57
98
115
198
234

Taper/Taper

11

Equal Tees

Quick-Lock

Taper/Taper

12

Filament-wound equal Tee with integral Quick-Lock (1-6 inch) or Taper/Taper (8-40 inch)
socket ends for adhesive bonding.
Nominal
Pipe
Size

[mm] [inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

Laying
Length
total run
(LL1)
[mm]
54
60
128
172
210
254
286
376
452
546
544
590
648
712
838
964
1016
1090
1220
1466

Overall
Length
total run
(OL1)
[mm]
108
124
220
264
302
368
400
506
612
736
744
810
876
966
1194
1320
1372
1446
1626
2106

Laying
Length
branch
(LL2)
[mm]
27
30
64
86
105
127
143
188
226
273
272
295
324
356
419
482
508
545
610
733

Overall
Length
branch
(OL2)
[mm]
54
62
110
132
151
184
200
253
306
368
372
405
438
483
597
660
686
723
813
1053

Maximum
Working
Pressure

Average
Weight

[bar]
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0

[kg]
0.2
0.4
1
1.8
2.5
5
6.7
10
18
29
37
56
69
92
168
285
337
459
581
686

Reducing Tees

Filament-wound standard and fabricated reducing tees with integral Quick-Lock (1-6
inch) or Taper/Taper (8-40 inch) socket ends for adhesive bonding.
Nominal
Pipe
Size
(runxbranch)

Quick-Lock Filament wound

Quick-Lock Fabricated

Taper/Taper Filament wound

Taper/Taper Fabricated

[mm]
40x25
50x25
50x40
80x25
80x40
80x50
100x25
100x40
100x50
100x80
125x50
125x80
125x100
150x25
150x40
150x50
150x80
150x100
150x125
200x25
200x40
200x50
200x80
200x100
200x150
250x25
250x40
250x50
250x80
250x100
250x150
250x200
300x25
300x40
300x50
300x80
300x100
300x150
300x200
300x250

Laying Overall
Length Length
(LL1)
(OL1)
half run

half run

Laying
Length
(LL2)
branch

Overall Maximum Average

Length Working Weight
(OL2) Pressure
branch

[inch]
[mm]
[mm]
[mm]
[mm]
[bar]
[kg]
1.5x1
30
62
30
57
17.2
0.6
2x1
64
110
57
84
17.2
0.9
2x1.5
64
110
57
89
17.2
1
3x1
86
132
76
103
17.2
1.6
3x1.5
86
132
76
108
17.2
1.6
3x2
86
132
76
122
17.2
1.7
4x1 72 118 194 221 17.2 7.5
4x1.5 89 136 194 226 17.2 9.0
4x2
105
151
89
135
17.2
2.1
4x3
105
151
98
144
17.2
2.3
5x2
127
184
102
148
17.2
3.4
5x3
127
184
111
157
17.2
4
5x4
127
184
118
164
17.2
4.6
6x1 83 140 221 248 17.2
11.7
6x1.5 101 158 221 253 17.2
13.8
6x2
143
200
114
160
17.2
6.2
6x3
143
200
124
170
17.2
5.7
6x4
143
200
130
176
17.2
5.9
6x5
143
200
136
193
17.2
6.2
8x1 88 153 245 272 17.2
15.0
8x1.5 88 153 246 278 17.2
17.5
8x2 88 153 245 291 17.2
19.9
8x3
188
253
149
195
17.2
9.1
8x4
188
253
162
208
17.2
9.7
8x6
188
253
168
225
17.2
11.4
10x1 88 168 273 300 17.2
18.1
10x1.5 88 168 273 305 17.2 21
10x2 88 168 273 318 17.2 24
10x3 100 180 273 318 17.2 24
10x4
226
306
184
230
17.2
14.8
10x6
226
306
194
251
17.2
15.5
10x8
226
306
203
268
17.2
16.5
12x1 88 183 298 325 17.2 21
12x1.5 88 183 298 330 17.2 25
12x2 88 183 298 344 17.2 29
12x3 100 195 298 344 17.2 29
12x4
273
368
206
252
17.2
21
12x6
273
368
219
276
17.2
22
12x8
273
368
229
294
17.2
23
12x10
273
368
241
321
17.2
24

Note: The regular font style numbers are filament wound tees. The lightly shaded Italic numbers
are fabricated tees.

13

Reducing Tees (cont)

Nominal
Pipe
Size
(runxbranch)

Quick-Lock Filament wound

Quick-Lock Fabricated

Taper/Taper Filament wound

[mm]
350x25
350x40
350x50
350x80
350x100
350x150
350x200
350x250
350x300
400x25
400x40
400x50
400x80
400x100
400x150
400x200
400x250
400x300
400x350
450x25
450x40
450x50
450x80
450x100
450x150
450x200
450x250
450x300
450x350
450x400
500x25
500x40
500x50
500x80
500x100
500x150
500x250
500x300
500x350
500x400
500x450

Laying Overall
Length Length
(LL1)
(OL1)
half run

half run

Laying
Length
(LL2)
branch

Overall Maximum Average

Length Working Weight
(OL2) Pressure
branch

[inch]
[mm]
[mm]
[mm]
[mm]
[bar]
[kg]
14x1 88 188 313 340 17.2 24
14x1.5 88 188 313 345 17.2 28
14x2 88 188 313 359 17.2 31
14x3 100 200 313 359 17.2 31
14x4 113 213 313 359 17.2 31
14x6
272
372
244
301
17.2
29
14x8
272
372
254
319
17.2
30
14x10
272
372
267
347
17.2
32
14x12
272
372
288
383
17.2
34
16x1 88 198 338 365 17.2 29
16x1.5 88 198 338 370 17.2 33
16x2 88 198 338 384 17.2 37
16x3 100 210 338 384 17.2 37
16x4 113 223 338 384 17.2 37
16x6
295
405
264
321
17.2
37
16x8
295
405
273
338
17.2
38
16x10
295
405
283
363
17.2
41
16x12
295
405
304
399
17.2
45
16x14
295
405
292
392
17.2
49
18x1 88 202 358 385 16.0 31
18x1.5 88 202 358 390 16.0 31
18x2 88 202 358 404 16.0 22
18x3 100 214 358 404 16.0 35
18x4 113 227 358 404 16.0 38
18x6 138 252 367 424 16.0 45
18x8
324
438
306
371
16.0
53
18x10
324
438
319
399
16.0
60
18x12
324
438
328
423
16.0
67
18x14
324
438
317
417
16.0
66
18x16
324
438
319
429
16.0
69
20x1 88 215 382 409 16.0 35
20x1.5 88 215 382 414 16.0 35
20x2 88 215 382 428 16.0 36
20x3 100 227 382 428 16.0 39
20x4 113 240 382 428 16.0 43
20x6 138 265 391 448 16.0 50
20x10
356
483
344
424
16.0
77
20x12
356
483
354
449
16.0
82
20x14
356
483
343
443
16.0
85
20x16
356
483
344
454
16.0
85
20x18
356
483
350
464
16.0
89

Note: Tees main-run (18-40 inch) with Quick-Lock socket branch (1-6 inch) are fabricated Tees.
The regular font style numbers are filament wound tees. The lightly shaded Italic numbers are
fabricated tees.
Taper/Taper Fabricated

14

Reducing Tees (cont)

Nominal
Pipe
Size
(runxbranch)

Quick-Lock Filament wound

Quick-Lock Fabricated

Taper/Taper Filament wound

[mm]
550x200
550x250
550x300
550x350
550x400
550x450
550x500
600x25
600x40
600x50
600x80
600x100
600x150
600x200
600x250
600x300
600x350
600x400
600x450
600x500
700x25
700x40
700x50
700x80
700x100
700x150
700x350
700x400
700x450
700x500
700x600
750x25
750x40
750x50
750x80
750x100
750x150
750x300
750x350
750x400
750x450
750x500
750x600

Laying Overall
Length Length
(LL1)
(OL1)
half run

half run

Laying
Length
(LL2)
branch

Overall Maximum Average

Length Working Weight
(OL2) Pressure
branch

[inch]
[mm]
[mm]
[mm]
[mm]
[bar]
[kg]
22x8
388
540
357
422
16.0
80
22x10
388
540
370
450
16.0
85
22x12
388
540
379
474
16.0
90
22x14
388
540
368
468
16.0
94
22x16
388
540
370
480
16.0
94
22x18
388
540
375
489
16.0
98
22x20
388
540
381
508
16.0
102
24x1 88 266 430 457 16.0 51
24x1.5 88 266 430 462 16.0 51
24x2 88 266 430 476 16.0 52
24x3 100 278 430 476 16.0 56
24x4 113 291 430 476 16.0 61
24x6 138 316 439 496 16.0 69
24x8
419
597
412
477
16.0
78
24x10
419
597
386
466
16.0
85
24x12
419
597
417
512
16.0
85
24x14
419
597
394
494
16.0
101
24x16
419
597
395
505
16.0
99
24x18
419
597
413
527
16.0
137
24x20
419
597
406
533
16.0
156
28x1 88 266 491 518 16.0 59
28x1.5 88 266 491 523 16.0 59
28x2 88 266 491 537 16.0 59
28x3 100 278 491 537 16.0 64
28x4 113 291 491 537 16.0 70
28x6 138 316 500 557 16.0 80
28x14
482
660
490
590
16.0
147
28x16
482
660
500
610
16.0
166
28x18
482
660
500
614
16.0
189
28x20
482
660
506
633
16.0
210
28x24
482
660
506
684
16.0
252
30x1 88 266 516 543 16.0 63
30x1.5 88 266 516 548 16.0 63
30x2 88 266 516 562 16.0 63
30x3 100 278 516 562 16.0 69
30x4 113 291 516 562 16.0 74
30x6 138 316 525 582 16.0 85
30x12
508
686
765
860
16.0
118
30x14
508
686
722
822
16.0
157
30x16
508
686
698
808
16.0
178
30x18
508
686
488
602
16.0
202
30x20
508
686
495
622
16.0
225
30x24
508
686
481
659
16.0
270

Taper/Taper Fabricated
Note: Tees main-run (18-40 inch) with Quick-Lock socket branch (1-6 inch) are fabricated Tees.
The regular font style numbers are filament wound tees. The lightly shaded Italic numbers are
fabricated tees.

15

Reducing Tees (cont)

Nominal
Pipe
Size
(runxbranch)

Quick-Lock Filament wound

Quick-Lock Fabricated

[mm]
800x25
800x40
800x50
800x80
800x100
800x150
800x500
800x600
800x700
800x750
900x25
900x40
900x50
900x80
900x100
900x150
900x400
900x450
900x500
900x600
900x700
900x750
1000x25
1000x40
1000x50
1000x80
1000x100
1000x600
1000x700
1000x750
1000x800
1000x900

Laying Overall
Length Length
(LL1)
(OL1)
half run

half run

Laying
Length
(LL2)
branch

Overall Maximum Average

Length Working Weight
(OL2) Pressure
branch

[inch]
[mm]
[mm]
[mm]
[mm]
[bar]
[kg]
32x1 88 266 541 568 16.0 66
32x1.5 88 266 541 573 16.0 67
32x2 88 266 541 587 16.0 67
32x3 100 278 541 587 16.0 73
32x4 113 291 541 587 16.0 79
32x6 138 316 550 607 16.0 90
32x20
545
723
523
650
16.0
258
32x24
545
723
523
701
16.0
310
32x28
545
723
532
710
16.0
348
32x30
545
723
534
712
16.0
387
36x1 88 291 591 618 16.0 78
36x1.5 88 291 591 623 16.0 78
36x2 88 291 591 637 16.0 78
36x3 100 303 591 637 16.0 85
36x4 113 316 591 637 16.0 92
36x6 138 341 600 657 16.0 105
36x16
610
813
563
673
16.0
270
36x18
610
813
563
677
16.0
290
3620
610
813
563
690
16.0
323
36x24
610
813
541
719
16.0
387
36x28
610
813
570
748
16.0
459
36x30
610
813
584
762
16.0
484
40x1 120 440 641 668 16.0 92
40x1.5 120 440 641 673 16.0 92
40x2 120 440 641 687 16.0 92
40x3 132 452 641 687 16.0 100
40x4 145 465 641 687 16.0 100
40x24
733
1053
593
771
16.0
456
40x28
733
1053
632
810
16.0
541
40x30
733
1053
633
811
16.0
571
40x32
733
1053
652
830
16.0
605
40x36
733
1053
652
855
16.0
634

Taper/Taper Filament wound

Note: Tees main-run (18-40 inch) with Quick-Lock socket branch (1-6 inch) are fabricated Tees.
The regular font style numbers are filament wound tees. The lightly shaded Italic numbers are
fabricated tees.

Taper/Taper Fabricated

16

Fabricated Reducing
Tees with Flanged
Branch

Integral Quick-Lock (4-6 inch) or Taper (8-16 inch) socket ends with flanged branch
Nominal
Pipe
Size
(runxbranch)

Quick-Lock

Taper/Taper

[mm]
100x25
100x40
150x25
150x40
200x25
200x40
200x50
250x25
250x40
250x50
250x80
300x25
300x40
300x50
300x80
350x25
350x40
350x50
350x80
350x100
400x25
400x40
400x50
400x80
400x100

[inch]
4x1
4x1.5
6x1
6x1.5
8x1
8x1.5
8x2
10x1
10x1.5
10x2
10x3
12x1
12x1.5
12x2
12x3
14x1
14x1.5
14x2
14x3
14x4
16x1
16x1.5
16x2
16x3
16x4

Laying
Length
(LL1)

Overall
Length
(OL1)

Laying
Length
(LL2)

[mm]
72
89
83
101
88
88
88
88
88
88
100
88
88
88
100
88
88
88
100
113
85
103
118
118
118

[mm]
118
135
140
158
153
153
153
168
168
168
180
183
183
183
195
188
188
188
200
213
187
205
220
220
220

[mm]
224
229
251
256
276
281
295
303
308
322
323
329
334
348
349
344
349
363
364
364
369
374
388
389
389

half run

half run

branch

Maximum
Working
Pressure

[bar]
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2

Average
Weight
[kg]
8.0
9.7
12.2
14.5
15.5
18.2
21
18.6
22
26
26
22
26
30
31
24
28
33
33
34
29
34
39
39
40

Note: Other sizes, or multiple size branched tees available on request. Please contact NOV Fiber
Glass Systems.

17

Fabricated Reducing
Tees with Flanged
Branch (cont)

Integral Taper (18-40 inch) socket ends with flanged branch

Nominal
Pipe
Size
(runxbranch)

Quick-Lock

Taper/Taper

[mm]
450x25
450x40
450x50
450x80
450x100
450x150
500x25
500x40
500x50
500x80
500x100
600x25
600x40
600x50
600x80
600x100
650x25
650x40
650x50
650x80
650x100
700x25
700x40
700x50
700x80
700x100
750x25
750x40
750x50
750x80
750x100
800x25
800x40
800x50
800x80
800x100
900x25
900x40
900x50
900x80
900x100
1000x25
1000x40
1000x50
1000x80
1000x100

[inch]
18x1
18x1.5
18x2
18x3
18x4
18x6
20x1
20x1.5
20x2
20x3
20x4
24x1
24x1.5
24x2
24x3
24x4
26x1
26x1.5
26x2
26x3
26x4
28x1
28x1.5
28x2
28x3
28x4
30x1
30x1.5
30x2
30x3
30x4
32x1
32x1.5
32x2
32x3
32x4
36x1
36x1.5
36x2
36x3
36x4
40x1
40x1.5
40x2
40x3
40x4

Laying
Length
(LL1)

Overall
Length
(OL1)

Laying
Length
(LL2)

[mm]
88
88
88
100
113
138
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
88
88
88
100
113
120
120
120
132
145

[mm]
202
202
202
214
227
252
215
215
215
227
240
266
266
266
278
291
266
266
266
278
291
266
266
266
278
291
266
266
266
278
291
266
266
266
278
291
291
291
291
303
316
440
440
440
452
465

[mm]
388
394
408
409
409
430
412
418
432
433
433
460
467
480
481
481
497
502
516
517
517
521
527
541
542
542
546
552
566
567
567
571
576
590
590
590
621
627
641
642
642
672
677
691
692
692

half run

half run

branch

Maximum
Working
Pressure

[bar]
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0

Average
Weight
[kg]
32
32
33
37
41
49
36
36
37
41
46
52
52
53
58
63
78
78
78
83
88
59
59
61
67
73
63
63
64
71
77
67
67
68
75
82
78
79
80
87
94
92
93
94
103
113

Note: Other sizes, or multiple size branched tees available on request. Please contact NOV Fiber
Glass Systems.

18

Bushing Saddles

Filament-wound pipe saddles with stainless steel, 1/2 inch and 3/4 inch threaded bushings.(1)

Nominal
Angle Saddle
Saddle Maximum Average
Required
Pipe
Length
Thickn. Working
Weight
Adhesive
Size

(B)
(ts) Pressure
Kits
[mm] [ inch] [degree]
[mm]
[mm]
[bar]
[kg]
[3 Oz] [6 Oz]
50
2
180
100
14
17.2
0.5
1
80
3
180
100
14
17.2
0.6
1
100
4
180
100
14
17.2
0.8
1
125
5
180
100
14
17.2
0.9
-
1
150
6
180
100
14
17.2
1.0
-
1
200
8
180
100
14
17.2
1.2
-
1
250
10
180
100
14
17.2
1.6
1
1
300
12
180
100
14
12
1.9
1
1
350
14
180
100
14
12
2.1
1
1
400
16
180
100
14
12
2.5
-
2
450
18
90
100
14
12
3.3
-
1
500
20
90
100
14
12
3.7
1
1
600
24
90
100
14
12
4.4
-
2
(1)

Consult NOV Fiber Glass Systems for other material types or other sized bushings.
For higher pressures, above 16.0/12 bar, contact NOV Fiber Glass Systems.

45 Laterals

Filament-wound 45 laterals with integral Quick-Lock (2-6 inch) or Taper/Taper (8-16 inch)
socket ends, for adhesive bonding.
Nominal
Pipe
Size
[mm] [inch]
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16

Laying
Length
(LL1)
[mm]
64
76
76
89
89
124
137
159
150
150

Overall
Length
(OL1)
[mm]
110
122
122
146
146
189
217
254
250
260

Laying
Length
(LL2)
[mm]
203
254
305
337
368
455
531
641
632
632

Overall
Length
(OL2)
[mm]
249
300
351
394
425
520
611
736
732
742

Maximum Average
Working Weight
Pressure
[bar]
[kg]
17.2
1.6
17.2
3.0
17.2
3.9
17.2
5.8
17.2
6.8
17.2
12.0
12
21
12
30
12
39
12
54

19

Concentric Reducers

Quick-Lock

Taper/Taper

20

Filament-wound concentric reducers with integral Quick-Lock (1-6 inch) or Taper/Taper

(8-40 inch) socket ends, for adhesive bonding.

Nominal
Laying
Overall
Maximum
Average
Pipe Size
Length
Length
Working
Weight
(runxrun)
(LL)
(OL)
Pressure
[mm]
[inch]
[mm]
[mm]
[bar]
[kg]
40x25
1.5x1
32
91
17.2
0.2
50x25
2x1
64
137
17.2
0.3
50x40
2x1.5
32
110
17.2
0.5
80x40
3x1.5
76
154
17.2
0.5
80x50
3x2
54
146
17.2
0.5
100x50
4x2
76
168
17.2
1.1
100x80
4x3
73
165
17.2
0.9
125x80
5x3
74
177
17.2
1.4
125x100
5x4
74
177
17.2
1.5
150x80
6x3
97
200
17.2
1.8
150x100
6x4
94
197
17.2
1.8
150x125
6x5
110
224
17.2
1.8
200x100
8x4
153
264
17.2
2.9
200x150
8x6
119
241
17.2
2.7
250x150
10x6
138
275
17.2
3.7
250x200
10x8
135
280
17.2
3.6
300x200
12x8
189
349
17.2
5.0
300x250
12x10
176
351
17.2
4.6
350x250
14x10
214
394
17.2
7.2
350x300
14x12
217
412
17.2
7.3
400x300
16x12
204
409
17.2
8.9
400x350
16x14
183
393
17.2
9.0
450x400
18x16
113
337
16.0
12.7
500x400
20x16
235
472
16.0
23
500x450
20x18
123
364
16.0
18.9
550x400
22x16
340
602
16.0
36
550x450
22x18
228
494
16.0
32
550x500
22x20
106
385
16.0
29
600x400
24x16
463
751
16.0
48
600x450
24x18
353
645
16.0
44
600x500
24x20
230
535
16.0
39
600x550
24x22
126
456
16.0
36
700x400
28x16
775
1063
16.0
79
700x450
28x18
661
953
16.0
74
700x500
28x20
542
847
16.0
69
700x600
28x24
311
667
16.0
67
750x400
30x16
886
1174
16.0
112
750x450
30x18
775
1067
16.0
107
750x500
30x20
653
958
16.0
100
750x600
30x24
422
778
16.0
87
750x650
30x26
240
596
16.0
72
750x700
30x28
111
467
16.0
57
800x450
32x18
920
1212
16.0
125
800x500
32x20
798
1103
16.0
109
800x600
32x24
570
926
16.0
94
800x700
32x28
259
615
16.0
82
800x750
32x30
148
504
16.0
71
900x500
36x20
1029
1359
16.0
210
900x600
36x24
799
1180
16.0
176
900x700
36x28
487
868
16.0
140
900x750
36x30
375
756
16.0
126
1000x900
40x36
310
833
16.0
182

Eccentric Reducers

Quick-Lock

Taper/Taper

Filament-wound Eccentric Reducers with integral Quick-Lock (1-6 inch) or Taper/Taper

(8-40 inch) socket ends, for adhesive bonding.

Nominal
Laying
Overall Eccentricity Maximum Average
Pipe Size
Length
Length
Working
Weight
(runxrun)
(LL)
(OL)
(X)
Pressure
[mm]
[inch]
[mm]
[mm]
[mm]
[bar]
[kg]
40x25
1.5x1
56
115
7
17.2
0.2
50x25
2x1
100
173
13
17.2
0.3
50x40
2x1.5
44
122
6
17.2
0.5
80x40
3x1.5
150
228
20
17.2
0.5
80x50
3x2
108
200
14
17.2
0.5
100x50
4x2
200
292
27
17.2
1.1
100x80
4x3
93
185
12
17.2
0.9
125x100
5x4
101
204
14
17.2
1.5
150x80
6x3
293
396
39
17.2
1.8
150x100
6x4
200
303
27
17.2
1.8
150x125
6x5
100
214
13
17.2
1.8
200x100
8x4
405
516
52
17.2
2.9
200x150
8x6
205
327
25
17.2
2.7
250x150
10x6
410
547
53
17.2
3.7
250x200
10x8
235
380
27
17.2
3.6
300x200
12x8
429
589
53
17.2
5.0
300x250
12x10
229
404
26
17.2
4.6
350x250
14x10
340
520
42
17.2
7.2
350x300
14x12
159
354
16
17.2
7.3
400x300
16x12
344
549
41
17.2
8.9
400x350
16x14
215
425
25
17.2
9.0
450x300
18x12
450
640
63
16.0
15.6
450x350
18x14
322
525
43
16.0
14.2
450x400
18x16
197
413
18
16.0
12.7
500x400
20x16
324
553
39
16.0
23
500x450
20x18
197
438
22
16.0
18.9
600x400
24x16
580
860
93
16.0
48
600x450
24x18
450
742
73
16.0
44
600x500
24x20
325
630
48
16.0
39
750x400
30x24
451
807
86
16.0
87
900x400
36x24
832
1213
161
16.0
176
1000x800
40x32
739
1237
100
16.0
182
1000x900
40x36
419
942
52
16.0
192

21

Couplings

Quick-Lock

Taper/Taper

Nipples

Quick-Lock

Filament-wound couplings with integral Quick-Lock (1-6 inch) or Taper/Taper (8-40 inch)
socket ends, for adhesive bonding.
Nominal
Pipe
Size
[mm] [inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

22

Overall
Length
(OL)
[mm]
63
73
101
101
101
123
123
200
230
260
270
290
298
324
426
426
426
426
476
710

Outside
Diameter
(OD)
[mm]
42
58
79
108
133
153
183
230
289
350
377
430
463
514
618
742
795
848
950
1057

Maximum
Working
Pressure
[bar]
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0

Average
Weight
[kg]
0.1
0.1
0.3
0.4
0.6
0.9
1.1
1.7
2.3
2.8
4.6
7.2
10.7
13.0
18.8
24
25
27
35
41

Filament-wound nipples with integral Quick-Lock (1-6 inch) or Taper/Taper (8-40 inch) male
ends, for adhesive bonding.
Nominal
Pipe
Size
[mm]
[inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40
(1)

Taper/Taper

Laying
Length
(LL)
[mm]
9
9
9
9
9
9
9
70
70
70
70
70
70
70
70
70
70
70
70
70

Laying
Gap(1)
Length
(LL)

[mm]
[mm]
57
3
67
3
95
3
95
3
95
3
117
3
117
3
160
30
190
30
230
40
240
40
260
40
278
50
304
50
406
50
406
50
406
50
406
50
456
50
690
50

Remaining gap after bonding.

Maximum
Working
Pressure
[bar]
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
17.2
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0

Average
Weight
[kg]
0.1
0.1
0.1
0.1
0.2
0.3
0.4
0.6
0.9
1.1
3.1
4.4
5.9
7.8
12
21
22
24
36
51

Support Saddles

Filament-wound pipe saddles for wear, support and anchor.

Nominal Saddle
Pipe

Angle
Size

[mm] [inch] [degree]
25
1
180
40
1.5
180
50
2
180
80
3
180
100
4
180
125
5
180
150
6
180
200
8
180
250
10
180
300
12
180
350
14
180
400
16
180
450
18
180
500
20
180
600
24
180
700
28
180
750
30
180
800
32
180
900
36
180
1000
40
180

Saddle Saddle
Thickn. Weight
ts B=100mm
[mm]
[kg]
14
0.2
14
0.3
14
0.4
14
0.5
14
0.7
14
0.8
14
0.9
14
1.1
14
1.5
14
1.8
14
2.0
14
2.4
16
-
16
-
16
-
16
-
16
-
16
-
16
-
16
-

Required
Saddle
Required
Adhesive
Weight
Adhesive
Kits B=150mm
Kits
[3 and 6 oz]
[kg] [3 and 6 oz]
1
-
0.3
1
1
-
0.5
1
1
-
0.6
1
1
-
0.8
-
1
1
-
1.1
-
1
-
1
1.2
-
1
-
1
1.4
-
1.5
-
1
1.7
-
1.5
-
1.5
2.3
-
2
-
1.5
2.7
-
2.5
-
1.5
3.0
-
2.5
-
2
3.6
-
3
-
-
3.2
-
2
-
-
3.6
-
2
-
-
4.3
-
2
-
-
5.1
-
3
-
-
5.5
-
3
-
-
5.8
-
3
-
-
6.5
-
4
-
-
8.2
-
4

Notes:
1. Filament-wound support saddles are intended for protection of pipe at supports and clamps, as
well as for anchoring purposes. Support and anchor saddles are standard 180 sweeps. Saddles
are sup plied in standard lengths of 100 mm and 150 mm.
2. For special saddle lengths, thickness and/or sweep angles contact NOV Fiber Glass Systems.
3. Wear saddles are standard 90. Weights of 90 sweep saddles are 50% of value shown.

23

Grounding Saddles

Filament-wound pipe saddles for grounding in conductive piping systems.

Nominal
Required
Pipe
Size
[mm] [inch]
25
1
40
1.5
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

Saddle

Saddle

Saddle

Average

Angle

[degree]
90
90
90
90
90
90
90
45
45
45
45
45
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5

Length
B
[mm]
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76

Thickness
t s
[mm]
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16

Saddle
Weight
[kg]
0.1
0.1
0.1
0.1
0.2
0.3
0.3
0.2
0.2
0.2
0.3
0.3
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5

Adhesive
Kits
[3Oz]
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
3
3

Notes:
1. Bondstrand conductive adhesive should be used for mounting onto pipe.
2. Saddles are supplied with a 600 mm length of stainless steel cable.

Bell Mouths (1)

Filament-wound bell mouths with adhesive-bonded HD-flange.

Nominal
Pipe
Size
[mm] [inch]
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
(1)
(2)

24

Overall
Length
(OL)
[mm]
269
274
289
323
324
534
604
588
616
596
635
738
879

Length of
Bell Mouth
(H1)
[mm]
115
120
135
158
158
340
395
365
375
345
360
450
540

Internal
Diameter
(D1)
[mm]
110
220
275
400
450
750
850
850
850
850
900
1100
1300

Internal
Diameter
(D2)
[mm]
110
220
275
400
450
450
550
550
550
550
600
600
700

Average
Weight(1)

For special shape or dimension bell mouths, contact NOV Fiber Glass Systems.
Weights provided are for bell mouth with CL150 flange.

[kg]
3.1
5.0
8.4
12.7
14.7
26
39
51
60
67
90
119
171

Assembly of Double
O-ring expansion joint

Expansion Coupling

Filament-wound Key-Lock expansion coupling with integral double O-ring Key-Lock female
end one side and double O-ring female end on other side.
Nominal
Pipe
Size
[mm] [inch]
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

Laying
Length
(LL)
[mm]
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

Overall
O-ring
Key
Length
Size
Size
(OL)
[mm]
[mm]
[mm]
222
7 x 59.7
6 x 305
222
7 x 88.3
6 x 400
222
7 x 113.7
6 x 483
264
9 x 135
8 x 580
270
10 x 161.3
8 x 660
339
10 x 225.5
10 x 840
376
12.5 x 302
12 x 1270
478
12.5 x 342.3
15 x 1270
452
12.5 x 342.3
15 x 1360
496
12.5 x 393.1
18 x 1585
416
15.0 x 445.0
15 x 1750
433
15.0 x 490.0
15 x 1930
479
18.0 x 580.0
18 x 2240
560
20.0 x 685.0
20 x 2700
574
20.0 x 740.0
20 x 2700
644
20.0 x 790.0
20 x 3065
754
25.0 x 890.0
25 x 3175
740
26.0 x 987.0
20 x 3500

Average
Weight
[kg]
1.3
1.7
3.5
4.6
6.6
15.4
19.9
21
25
32
27
32
52
77
90
115
170
208

25

Key-Lock Adapter for

Expansion Coupling

Quick-Lock

Filament-wound double O-ring male Key-Lock adapter with integral Quick-Lock (2-6 inch)
or Taper/Taper (8-40 inch) socket end, for adhesive bonding.
Nominal
Pipe
Size
[mm]
[inch]
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

Laying
Length
(LL)
[mm]
85
85
85
102
105
138
148
190
185
210
193
201
224
265
272
307
362
355

Overall
Length
(OL)
[mm]
131
131
131
159
162
203
228
285
285
320
307
328
402
443
450
485
565
765

Average
Weight
[kg]
0.4
0.6
0.9
1.6
1.8
5.1
11.8
14.6
10.7
15.9
19.5
24
25
29
34
42
50
64

Taper/Taper

Double O-ring Adapter

for Expansion Coupling

Quick-Lock

Taper/Taper

26

Filament-wound double O-ring male adapter with integral Quick-Lock (1-6 inch) and Taper
(8-40 inch) socket end, for adhesive bonding.
Nominal
Pipe
Size
[mm]
[inch]
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
600
24
700
28
750
30
800
32
900
36
1000
40

Laying
Length
(LL)
[mm]
85
85
85
102
105
138
148
190
185
210
193
201
224
265
272
307
362
355

Overall
Length
(OL)
[mm]
131
131
131
159
162
203
228
285
285
320
307
328
402
443
450
485
565
765

Average
Weight
[kg]
0.4
0.7
0.9
1.6
1.8
5.1
11.8
14.6
10.7
15.9
19.5
24
25
29
34
42
50
64

Adhesive

Number of Adhesive Kits per joint.

Nominal
Pipe
Size
[mm]
[inch]
25
1
40
1
50
2
80
3
100
4
125
5
150
6
200
8
250
10
300
12
350
14
400
16
450
18
500
20
550
22
600
24
650
26
700
28
750
30
800
32
850
34
900
36
1000
40

Adhesive
Volume
[cm3]
88.7
88.7
88.7
88.7
88.7
88.7
88.7
88.7
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4
177.4

Required
Adhesive Kit
Size
[Oz]
3
3
3
3
3
3
3
3
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

Minimum number
of Adhesive Kits
required per joint
Number
1/5
1/5
1/4
1/3
1/2
1
1
1
1
1
2
2
2
3
4
4
4
4
5
5
6
6
7

Notes:
1. Adhesive Kits should never be split. If remainder is not used for other joints made at the same
time then surplus must be discarded.
2. Required adhesive for saddles is shown in the dimension table of the respective saddles.
3. For type of adhesive to be used, please refer to the Bondstrand Corrosion Guide.

27

Engineering Design &

Installation

Consult the following literature for recommendations pertaining design, installation and
installation use of Bondstrand pipe, fittings and flanges:

Assembly Instructions for Quick-Lock Adhesive-Bonded Joints
Assembly Instructions for Taper/Taper Adhesive-Bonded Joints
Assembly Instructions for Bondstrand Fiberglass Flanges
Bondstrand Corrosion Guide for Fiberglass Pipe and Tubing
Bondstrand Pipe Shaver Overview
Bondstrand Marine Design Manual
Bondstrand Heating Blanket
Please contact NOV Fiber Glass Systems or visit www.fgepipe.com (Document Library)
for the latest version of the above-mentioned literature.

Specials

Note: Elbows with non-standard angles, non-standard drilled flanges, multi-branch tees
and special spools are available on request, please consult NOV Fiber Glass Systems.

Field Testing

Pipe system is designed for hydrostatic testing with water at 150% of rated pressure.

Conversions

1 psi = 6895 Pa = 0.07031 kg/cm2

1 bar = 105 Pa = 14.5 psi = 1.02 kg/cm2
1 MPa = 1 N/mm2 = 145 psi = 10.2 kg/cm2
1 inch = 25.4 mm
1 Btu.in/ft2 hF = 0.1442 W/mK
C = 5/9 (F-32)

National Oilwell Varco has produced this brochure for general information only,
and it is not intended for design purposes. Although every effort has been made to
maintain the accuracy and reliability of its contents, National Oilwell Varco in no way
assumes responsibility for liability for any loss, damage or injury resulting from the use
of information and data herein. All applications for the material described are at the
users risk and are the users responsibility.
All brands listed are trademarks of National Oilwell Varco.

North America
17115 San Pedro Avenue
Suite 200
San Antonio, TX 78232 USA
Phone: +1 210 477 7500

South America
Estrada de Acesso Zona
Industrial Porturia de Suape, s/no.
Recife, PE, Brazil 55.590-000
Phone: +55 81 3501 0023

Europe
P.O. Box 6, 4190 CA
Geldermalsen, The Netherlands
Phone: +31 345 587 587

Asia Pacific
No. 7A, Tuas Avenue 3
Jurong, Singapore 639407
Phone: +65 6861 6118

Middle East
P.O. Box 17324
Dubai, UAE
Phone: +971 4881 3566

www.fgspipe.com [email protected]

2013 National Oilwell Varco. All rights reserved.

MOS2000ENG July 2014