PSD 61af 022 105 - en

High-Temperature Monobloc Air-to-Water Heat Pumps
with Integrated Hydronic Module
www.eurovent-certification.com
www.certiflash.com
Heating system control (accessory)
61AF 022-105
Nominal heating capacity 21-102 kW
The Aquasnap high-temperature heat pump range was
designed for commercial applications such as the heating
of offices, apartments and hotels as well as domestic hot
water production in new and refurbished buildings.
Features
The main features of this product range are:

Energy savings
The 61AF range is certified to the Eurovent energy
efficiency class A with a coefficient of performance (COP)
of over 4. This complies with the COP required by the
Ecolabel certification.
Ease-of-installation
The high-temperature Aquasnap heat pumps incorporate
an optional hydronic module with a multi-speed pump.
Easy integration
The low noise levels of the 61AF heat pump and its very
compact chassis reduce the noise disturbance from the unit.
Application flexibility
The operating range allows outside temperatures down to
-20C and leaving water temperatures up to 65C for
domestic hot water applications.
Availability
-- Intelligent unit control permits unit operation in extreme
conditions, minimising unit shut-down times.
-- Hot water production at 65C is available continuously.
Carrier quality is your guarantee for the safety and
durability of the installation.
The Aquasnap high-temperature heat pumps incorporate
the latest technological features:
-- scroll compressors with vapour injection
-- low-noise fans made of a composite material
-- auto-adaptative microprocessor control
-- electronic expansion valve
-- multi-speed pump.
The Aquasnap high-temperature heat pumps can be
equipped with a hydronic module that is integrated into
the heat pump chassis, limiting the installation to straightforward operations like the wiring and the connection of
the hot water supply and return piping.
Quiet operation
Compressors
-- Low-noise scroll compressors with low vibration level.
-- The compressor assembly is installed on an independent
chassis and supported by anti-vibration mountings.
-- Dynamic suction and discharge piping supports,
minimising vibration transmission (Carrier patent).
Evaporator section
-- Vertical evaporator coils
-- Protection grilles on anti-vibration mountings to protect
the heat exchanger against possible shocks.
-- Latest-generation low-noise Flying Bird fans, made of a
composite material (Carrier patent), are now even quieter
and do not generate intrusive low-frequency noise.
-- Rigid fan installation for reduced start-up noise (Carrier
patent).
Environmental care
Ozone-friendly R-407C refrigerant

-- Chlorine-free refrigerant of the HFC group with zero
ozone depletion potential.
-- Very efficient - ensures an increased energy efficiency
ratio (COP).
Leak-tight refrigerant circuit
-- Brazed refrigerant connections for increased leaktightness.
-- Reduction of leaks due to elimination of capillary tubes
(TXVs).
-- Verification of pressure transducers and temperature
sensors without transferring refrigerant charge.
Easy and fast installation
Integrated hydronic module (option)

-- Multi-speed centrifugal water pump, based on the pressure
loss of the hydronic installation.
-- Water filter protects the water pump against circulating
debris.
-- Pump protected against cavitation by a pressure transducer
that measures the entering water pressure.
-- Overpressure valve, set to 4 bar.
-- Thermal insulation and frost protection down to -20C,
using an electric resistance heater (see table of options).
Physical features
-- The unit has a small footprint and a low height (1329 mm)
allowing it to blend in with any architectural styles.
-- The unit is enclosed by easily removable panels, covering
all components (except condensers and fans).
Simplified electrical connections
-- Single power supply point without neutral.
-- Main disconnect switch with high trip capacity.
-- Transformer for safe 24 V control circuit supply included.
Fast commissioning
-- Systematic factory operation test before shipment.
-- Quick-test function for step-by-step verification of the
instruments, electrical components and motors.
Economical operation
Increased energy efficiency

-- Eurovent energy efficiency class A (in accordance with
EN14511-3:2011).
-- The exceptional energy efficiency level (COP) of the
high-temperature Aquasnap heat pumps in the heating
mode is the result of a long qualification and optimisation
process.
-- The electronic expansion device (EXV) allows operation
at a lower condensing pressure (COP optimisation).
-- Dynamic superheat management for better utilisation of
the condenser surface.
Reduced maintenance costs
-- Maintenance-free scroll compressors with vapour
injection.
-- Pro-Dialog+ control offers fast diagnosis of possible
incidents and their history.
Superior reliability
State-of-the-art concept
-- Cooperation with specialist laboratories and use of limit
simulation tools (finite element calculations) for the
design of the critical components, e.g. motor supports,
suction/discharge piping etc.
Auto-adaptive control
-- Control algorithm prevents excessive compressor
cycling and permits reduction of the water quantity in
the hydronic circuit (Carrier patent).
Exceptional endurance tests
-- Corrosion resistance tests in salt mist in the laboratory.
-- Accelerated ageing test on components that are
submitted to continuous operation: compressor piping,
fan supports.
-- Transport simulation test in the laboratory on a
vibrating table.
Pro-Dialog+ control
Pro-Dialog+ combines intelligence with operating simplicity.

The control constantly monitors all machine parameters
and precisely manages the operation of compressors,
expansion devices, fans and of the condenser water pump
for optimum energy efficiency.
Energy management
-- Seven-day internal time schedule clock: permits unit on/
off control and operation at a second set point.
-- Set point reset based on the outside air temperature or
the return water temperature or on the water heat
exchanger delta T.
-- Master/slave control of two heat pumps operating in
parallel with operating time equalisation and automatic
change-over in case of a unit fault (option).
-- Start/stop based on the outside air temperature.
Ease-of-use
-- The new backlighted LCD interface includes a manual
control potentiometer to ensure legibility under any
lighting conditions.
-- The information is displayed clearly in English, French,
German, Italian and Spanish (for other languages please
consult Carrier).
-- The Pro-Dialog+ navigation uses intuitive tree-structure
menus, similar to the Internet browers. They are userfriendly and permit quick access to the principal operating parameters: number of compressors operating, suction/
discharge pressure, compressor operating hours, set point,
air temperature, entering/leaving water temperature.
-- As standard the unit includes a board for the control of
a boiler and four electric resistance heater stages.
Pro-Dialog+ operator interface
Remote operating mode with volt-free contacts

(standard)
A simple two-wire communication bus between the RS485

port of the Aquasnap high-temperature heat pumps and
the Carrier Comfort Network offers multiple remote
control, monitoring and diagnostic possibilities.
Carrier offers a vast choice of control products, specially
designed to control, manage and supervise the operation of
a heating system. Please consult your Carrier representative
for more information on these products.
-- Start/stop: opening of this contact will shut down the
heat pump.
-- Dual set point: closing of this contact activates a second
heating set point (example: unoccupied mode).
-- Demand limit: closing of this contact limits the maximum
heat pump capacity to a predefined value.
-- User safety: this contact is connected in series with the
water flow switch and can be used for any customer
safety loop.
-- Water pump control.
-- Alert indication: this volt-free contact indicates the
presence of a minor fault.
-- Alarm indication: this volt-free contact indicates the
presence of a major fault that has led to the shut-down
of the refrigerant circuit.
Remote interface (accessory)
This accessory includes a box that can be mounted inside

the building. The power supply is provided via a 220 V/24 V
transformer supplied. This interface allows access to the
same menus as the unit interface and can be installed up
to 300 m from the 61AF unit.
Flying Bird IV fan
Circuit B Total Capacity
PRO-DIALOG+
Options and accessories

Options
Anti-corrosion protection,
traditional coils
Unit with discharge air ducts
No.
3A
Low noise level

Very low noise level
15
15LS
Soft starter
Frost protection down to -20C
25
42
Master/slave operation
58
Low-pressure single-pump
hydronic module
JBus gateway
116F
BacNet gateway
148C
LonTalk gateway
148D
Water screw connection

between the customers
condenser and the unit
Welded water connection
between the customers
condenser and the unit
Remote user interface
265
11
148B
267
Advantages
Improved corrosion resistance, recommended for marine
environments
Enhances unit adjustment during installation (e.g. under
a roof)
Noise emission reduction
Noise emission reduction
Use
61AF 022-105
Reduced compressor start-up current

Hydronic module frost protection at low outside temperature
Operation of two units connected in parallel with operating
time equalisation
61AF 022-105
61AF 022-105
with option 116F
61AF 022-105
Easy and fast installation
61AF 022-105
Two-directional communications board, complies with JBus protocol

Two-directional communications board, complies with BacNet protocol
Two-directional communications board, complies with LonTalk protocol
Victaulic screw connection at the condenser
(standard on sizes 022-030)
Easy connection by communication bus to a building

management system
management system
management system
Permits customer connections to be screwed to the unit
61AF 022-105
Welded Victaulic connection
Permits customer connections to be welded to the unit
61AF 035-055
Acoustic compressor cover

Acoustic compressor cover and fan speed
reduction, when ambient air temperature is
above 20C.
Electronic compressor starter
Electric heater on the hydronic module (option
116)
Unit equipped with an additional field-installed
leaving water temperature sensor, allowing
master/slave operation of two units connected
in parallel
See hydronic module chapter
Remotely installed user interface (via commu- Remote heat pump control up to 300 m
nication bus).
Accessories
Description
Advantages
00PPG000488000- Heating System
Additional control box not supplied with the
Heating system control facilitated
Manager type A: controls one heat emitter unit, to be installed remotely
type with an auxiliary electric heater or
boiler
Manager type B: controls two heat
unit, to be installed remotely
emitter types (or independent zones)
and domestic hot water production with
an auxiliary electric heater or boiler
Manager type C: controls two heat
unit, to be installed remotely
emitter types (or independent zones)
and domestic hot water production with
a district heating system as auxiliary
source
275
Description
Fins made of pre-treated aluminium (polyurethane or epoxy)
Fans with available pressure - max. 100 Pa
61AF 022-105
61AF 022-105
61AF 022-105
61AF 022-105
61AF 022-105
61AF 035-055
61AF 022-105
Use
61AF 022-105
61AF 022-105
61AF 022-105
Units with fans with available pressure for indoor installation

(option 11)
Fan discharge connection
This option applies to 61AF units installed inside the

building in a plant room. For this type of installation the
cold air leaving the air-cooled evaporators is discharged by
the fans to the outside of the building, using a duct system.
A square flange is supplied mounted on the unit. An

available standard round flange can easily be installed at
the fan discharge, if the installer prefers the use of a round
connection duct.
The installation of a duct system at the air evaporator

discharge line causes a pressure drop due to the resistance
caused by the air flow.
The unit is supplied with a grille on the discharge side.

This grille has to be removed before connection to the
duct system.
Therefore more powerful fan motors than those used for

the standard units are installed in the units with this
option. For each installation of a unit installed inside a
plant room the duct pressure drops differ, depending on
the duct length, duct section and direction changes.
It is advisable to make the connection to the duct system

with a flexible sleeve. If this recommendation is not observed,
a lot of vibration and noise may be transmitted to the
building structure.
Applicable rules for units incorporated into an air

duct system
61AF units equipped with fans with available pressure are

designed to operate with air discharge ducts with maximum
pressure drops of 100 Pa.
Ensure that the suction or discharge inlets are not accidentally obstructed by the panel positioning (e.g. low return or
open doors etc.).
Electrical data for 61AF units with option 11

61AF - units with option 11 (without hydronic
kit)
Power circuit
Nominal power supply
Voltage range
Control circuit supply
Maximum start-up current (Un)*
Standard unit
Unit with electronic starter option
Unit power factor at maximum capacity**
Maximum unit power input**
Nominal unit current draw***
Maximum unit current draw (Un)****
Maximum unit current draw (Un-10%)
Customer-side unit power reserve
Short-circuit stability and protection
022
030
035
045
V-ph-Hz
V
400-3-50
360-440
24 V, via internal transformer
A
A
107,1
105,1
133,5
173,5
58,6
57,6
72,5
93,3
0,82
0,82
0,82
0,82
9,8
12,7
14
15,7
16,4
19
22,3
25,3
18,5
23,7
26,5
29,5
23,2
30,5
34,3
38,5
Customer reserve at the 24 V control power circuit
See table on page 6
kW
A
A
A
055
075
105
193,5
103,7
0,82
17,9
30
33,5
44,1
159,5
106,5
0,82
28
43,9
52,3
67,9
226,5
147,5
0,82
35,9
59,3
66,3
87,5
* Maximum instantaneous start-up current (maximum operating current of the compressor + fan current + locked rotor current of the compressor).
** Power input, compressor and fan, at the unit operating limits (saturated suction temperature 10C, saturated condensing temperature 65C) and nominal voltage of 400 V (data given on the unit
nameplate).
*** Standardised Eurovent conditions: condenser entering/leaving water temperature = 40C/45C, outside air temperature db/wb = 7C/6C.
**** Maximum unit operating current at maximum unit power input and 400 V (values given on the unit nameplate).
Maximum unit operating current at maximum unit power input and 360 V.

Hydronic module (option 116)

Typical hydronic circuit diagram
The hydronic module option reduces the installation time.

The heat pump is factory-equipped with the main hydronic
components required for the installation: screen filter,
water pump, safety valve, water pressure transducer, flow
switch.
15
18 19
17
The Pro-Dialog+ control allows integration of system and

water pump protection devices (insufficient water flow
rate, water pressure, water flow rate etc.).
14
16
22
14
The pump supplied with the hydronic module is a multispeed pump.

An automatic pump start-up algorithm protects the heat
exchanger and the hydronic module piping against frost
down to -10C outside air temperature, as standard. If
necessary, increased frost protection down to -20 C is
possible by adding heaters to the hydronic module piping
(see option 42).
12
16
17 20
13
19
11
10
21
Legend
Components of the unit and hydronic module
1 Victaulic screen filter
2 Pressure sensor
Note: Gives pump suction pressure information (see installation manual)
3 Safety valve
4 Water drain valve
5 Shut-off valve
6 Water pump
7 Temperature sensors, BPHE inlet
Note: Gives heat exchanger entering temperature information (see installation manual)
8 Pressure gauge

Note: Allows measuring of the pump suction pressure, the pump leaving pressure and
the heat exchanger leaving pressure
9 Temperature sensor, BPHE outlet

Note: Gives heat exchanger leaving temperature information (see installation manual)
10 Automatic air vent
11 Flow switch
12 Plate heat exchanger frost protection heater
13 Plate heat exchanger
The hydronic module option is integrated into the heat

pump without increasing its dimensions and saves the
space normally used for the water pump.
Hydronic module
Installation components
14 Temperature probe well
15 Air vent
16 Flexible connection
17 Shut-off valve
18 Screen filter (obligatory for a unit without hydronic module)
19 Pressure gauge
20 Water flow control valve
21 Charge valve
22 Frost protection bypass valve (when shut-off valves [17] are closed during winter)
--- Hydronic module (unit with hydronic module)

Physical and electrical data, units with hydronic module

61AF
Operating weight*
Unit with hydronic module
Hydronic module
Maximum operating pressure
Water filter
Pumps
Water pump
Shaft power input
Power input**
Nominal operating current draw
Maximum current draw at 400 V***
Water connections (with hydronic module)
Connections
Outside diameter
Notes:
Units without hydronic module (standard units) are equipped with a flow switch and two
temperature sensors (7 and 9).
For units equipped with hydronic module, the pressure sensor located upstream of the pump
to prevent cavitation is installed on a connection without Schraeder valves. Depressurise
and drain the system before any intervention.
022
030
035
045
055
075
105
kg
349
403
436
524
549
926
1044
kPa
400
400
Victaulic screen filter
400
400
400
400
400
kW
kW
A
A
TOP-S 25
0.18
0.42
0.4
0.8
TOP-S 25
0.18
0.42
0.4
0.8
TOP-S40
0.35
0.63
0.6
1.3
TOP-S40
0.35
0.63
0.6
1.3
TOP-S40
0.35
0.63
0.7
1.3
TOP-S50
0.45
0.95
1.3
1.7
TOP-S50
0.45
0.95
1.5
1.7
inch
mm
1-1/4
42.4
1-1/4
42.4
1-1/2
48.3
1-1/2
48.3
1-1/2
48.3
2
60.3
2
60.3
* Weight shown is a guideline only. To find out the unit refrigerant charge, please refer to the unit nameplate.
** To obtain the maximum power input for a unit with hydronic module, add the maximum unit power input to the pump power input.
*** To obtain the maximum operating current draw for a unit with hydronic module, add the maximum unit current draw to the pump current draw.
Heating System Manager (HSM)

This accessory allows improved integration of the 61AF
heat pump to maximise the energy efficiency performance.
With three system levels for nine typical configurations,
most heating only applications are covered - from the
simplest to the most complex, such as interfacing with a
district heating system.
The control box can supply all auxiliary devices such as

the circulating pumps or the mixing or switching valves.
The heat pump is controlled by a CCN bus and the control
box includes an NRCP2-BASE board, a ProDialog interface
as well as all required sensors.
Each of these accessory configurations is described in

detail the installation manual for this accessory:
-- Choice of control options (on/off volt-free contact or
0-10 V signal for increased performance),
-- Domestic hot water production temperature control and
distribution.
Control box
Control box dimensions

603
180
120
52

Installation safety notes

The hydronic installation must be carried out by qualified personnel in accordance
with applicable laws and following standard accepted practices.
The hydronic installation must be regularly serviced.
An incorrect hydronic installation that does not comply with the safety, electrical
and thermal standards, as well as lacking/poor maintenance can lead to
excessive pressures and cause piping breaks.
25
536
33
170
559
382
442
17
416
17
1,5
20,5
400
10
Legend:
All dimensions are in mm.

1 Clearance required to open the door and for customer connection
Heating System Manager (HSM) - continued
Accessory 00PPG000488000- Heating System Manager type A
Heating System Manager: one heat emitter type with supplementary electric heater or boiler:
-- Allows control of a non-reversible heating system that includes a 61AF heat pump and a single heat emitter type or a single
comfort zone. For optimised energy efficiency the heat pump is controlled by a configurable weather compensation system.
The control box controls a supplementary electric heater or a standy-by boiler. The control box supplies power to the
circulating pumps.
Heating system example: one heat emitter type with supplementary electric heating or stand-by boiler
61AF + HSM
GT3
Heating system
P1
Back-up system
GT1 SV31
GT...
P1...
P2
SV...
Legend
GT1 Water temperature loop 1
GT3 Outside air temperature
P1
Pump for water loop 1 (radiators)
P2
External water pump for the heat pump
SV31 Three-way mixing valve for the back-up heater
Hot water
Accessory 00PPG000488100- Heating System Manager type B
Heating System Manager (as accessory 00PPG000488000-) two heat emitter types or independent zones and domestic hot
water production:
-- Allows control of a non-reversible heating system that includes a 61AF heat pump and two different heat emitter types
and/or two independent comfort zones. For optimised energy efficiency the heat pump is controlled by a configurable
weather compensation system. The control box controls a supplementary electric heater or a standy-by boiler. The control
box supplies power to the circulating pumps. Hot-water production can be permanent or programmable with a second
setpoint at the heat pump and control of a switching valve.
GT3
Heating system
P1
Back-up system
SV31
61AF + HSM
GT1
GT7:2
GT4
P7-2
SV34
Legend
SV32
P4
Floor heating
GT5
SV35
P2
GT7
P5
GT2
GT..
P..
Domestic hot
water in
P7
SV..
Hot water
Thermistors
GT2 Domestic hot water tank temperature
GT5 Domestic hot water temperature
GT7 Additional domestic hot water tank temperature
Pumps
P1
P2
P4
Pump for water loop 2 (floor heating)
P5
Pump to pre-heat the domestic hot water valve loop
P7
Pump for domestic hot water circulation
P7-2 Pump for domestic hot water circulation in an aditional tank
Valves
SV32 Heating/domestic hot water change-over valve
SV34 Three-way control valve for water loop 2
SV35 Three-way mixing valve for domestic hot water
NOTES:
This application example includes two zones and a supplementary boiler and domestic hot-water production.
The installation includes a switching valve (SV32) that allows switching from the heat pump capacity of the heating system to domestic hot-water production.
The primary heating circuit is the domestic hot-water production circuit. It includes a tank with an equivalent pressure drop to simplify system balancing.
Heating System Manager (HSM) - continued
Accessory 00PPG000488200- Heating System Manager type C
Heating System Manager (as accessory 00PPG000488100-) with the possibility to obtain additional heating and domestic
hot-water production capacity from a district heating system:
-- Allows control of a non-reversible heating system that includes a 61AF heat pump and two different heat emitter types
and/or two independent comfort zones. For optimised energy efficiency the heat pump is controlled by a configurable
weather compensation system. The control box controls the heating and/or domestic hot-water production support from a
district heating system. The control box supplies power to the circulating pumps. Hot-water production can be permanent
or programmable with a second setpoint at the heat pump and control of a switching valve.
Heating system
P1
GT1 SV31
GT1:3
SV21
GT3
61AF + HSM
GT1:4
GT7:2
SV27
GT4 P4 SV34
SV32
Floor heating
GT5 SV35
P2
GT7
GT2
P5
P..
P7
Domestic hot
water in
GT..
SV..
Hot water
Legend
Thermistors
GT1:3 Heat exchanger leaving water temperature, district heating
GT1:4 Heat exchanger entering water temperature, district heating
GT2 Domestic hot water tank temperature
GT5 Domestic hot water temperature
GT7 Additional domestic hot water tank temperature
GT7:2 Back-up heat exchanger temperature for domestic hot water
Pumps
P1
P2
P4
Pump for water loop 2 (floor heating)
P5
Pump to pre-heat the domestic hot water valve loop
P7
Pump for domestic hot water circulation
Valves
SV21 Valve for district heating heat exchanger for heating
SV27 Valve for district heating heat exchanger for domestic hot water
SV32 Heating/domestic hot water change-over valve
SV34 Three-way control valve for water loop 2
SV35 Three-way mixing valve for domestic hot water
Physical data
61AF
Heating application as per EN14511-3:2011*
Condition 1
Nominal heating capacity
COP
Eurovent class, heating
Condition 2
COP
Heating application**
Condition 1
COP
Condition 2
COP
Operating weight***
Standard unit (without hydronic kit)
Standard unit (plus hydronic module option)
Sound levels
Sound power level 10-12 W****
Sound pressure level at 10 m
Dimensions
Length x depth x height
Compressor
Quantity
Number of capacity stages
Refrigerant
Charge
Capacity control
Minimum capacity
Condenser
Water volume
Max. water-side operating pressure without hydronic module
Max. water-side operating pressure with hydronic module
Fan
Quantity
Total air flow (high speed)
Speed, standard unit
Speed, unit with option 11
Evaporator
Hydronic module (option 116)
Three-speed single pump
Water connections with/without hydronic module

Connections
Outside diameter
Chassis paint colour
022
030
035
045
055
075
105
kW
20.8
kW/kW 3.45
A
25.7
3.45
A
32.3
3.37
A
43.8
3.56
A
52.3
3.65
A
66.9
3.41
A
101.9
3.58
A
kW
20.8
kW/kW 4.11
25.7
4.14
32.3
4.07
43.7
4.31
52.2
4.36
66.8
3.97
101.7
4.25
kW
20.8
kW/kW 3.46
26.2
3.47
32.6
3.39
44.2
3.58
52.1
3.67
64.9
3.43
101.9
3.61
kW
20.8
kW/kW 4.13
26.2
4.17
32.5
4.10
44.1
4.34
52.0
4.39
64.8
4.00
101.6
4.29
kg
kg
343
349
396
403
421
436
509
524
533
549
900
926
1020
1044
dB(A)
dB(A)
81
50
82
51
83
51
83
51
84
53
84
52
85
53
mm
1110 x 1327 x 1330

1114 x 2100 x 1330
Hermetic scroll 48.3 r/s
1
1
1
1
1
1
1
1
1
1
R-407C
8.0
8.8
9.7
10.0
13.2
Pro-Dialog+
100
100
100
100
100
Direct-expansion plate heat exchanger
4.9
6.4
8.2
9.6
12.1
1000
1000
1000
1000
1000
400
400
400
400
400
Axial with rotating shroud, Flying Bird IV
1
1
1
1
1
3770
3748
3736
4035
4036
12
12
12
12
12
16
16
16
16
16
Grooved copper tubes and aluminium fins
kg
%
l
kPa
kPa
l/s
r/s
r/s
inch
mm
2273 x 2100 x 1330

2
2
2
2
22.0
26.5
50
50
16.4
1000
400
22.7
1000
400
2
7479
12
16
2
8072
12
16
Pump, Victaulic screen filter, safety valve, purge valves (water and air), cavitation pressure
sensor
Victaulic
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
2
2
42.4
42.4
48.3
48.3
48.3
60.3
60.3
Colour code: RAL 7035
* Eurovent-certified performances in accordance with standard EN14511-3:2011

Condition 1: Heating mode conditions: water heat exchanger water entering/leaving temperature 40C/45C, outside air temperature 7C db/6C wb.
** Gross performances, not in accordance with EN14511-3:2011. These performances do not take into account the correction for the proportional heating capacity and power input generated by the
water pump to overcome the internal pressure drop in the heat exchanger.
*** Weight shown is a guideline only. To find out the unit refrigerant charge, please refer to the unit nameplate..
**** In accordance with ISO 9614-1 and certified by Eurovent. The values have been rounded and are for information only and not contractually binding
For information, calculated from the sound power level Lw(A)
Units 61AF 022 and 61AF 030 include two sleeves for a 1-1/4 Victaulic to 1-1/4 screw connection as standard.
10
Electrical data
61AF - standard unit (without hydronic module)
Power circuit
Nominal power supply
Voltage range
Control circuit supply
Maximum start-up current (Un)*
Standard unit
Unit with electronic starter option
Unit power factor at maximum capacity**
Maximum unit power input**
Nominal unit current draw***
Maximum unit current draw (Un)****
Maximum unit current draw (Un-10%)
Customer-side unit power reserve
Short-circuit stability and protection
022
030
035
045
V-ph-Hz
V
400-3-50
360-440
24 V, via internal transformer
A
A
104
102
130
170
56
55
70
91
0.82
0.82
0.82
0.82
8.7
11.6
12.9
14.6
13.6
16.4
20.1
23.2
16.8
21.1
27.0
32.8
18.6
23.3
29.9
36.2
Customer reserve at the 24 V control power circuit
See table below.
kW
A
A
A
055
075
105
190
101
0.82
16.8
27.7
38.8
43.0
157
101
0.82
25.8
40.2
54.0
59.8
229
142
0.82
33.7
55.4
77.6
86.0
* Maximum instantaneous start-up current (maximum operating current of the compressor + fan current + locked rotor current of the compressor).
** Power input, compressor and fan, at the unit operating limits (saturated suction temperature 10C, saturated condensing temperature 65C) and nominal voltage of 400 V (data given on the unit
nameplate).
*** Standardised Eurovent conditions: condenser entering/leaving water temperature = 40C/45C, outside air temperature db/wb = 7C/6C.
**** Maximum unit operating current at maximum unit power input and 400 V (values given on the unit nameplate).
Maximum unit operating current at maximum unit power input and 360 V.

Short-circuit stability current, main disconnect without fuse (TN system*)

61AF - standard unit (main disconnect switch)
022
Value with unspecified upstream protection
Short-term current at 1 s (Icw)
kA rms
0.6
Admissible peak current (Ipk)
kA pk
4.5
Maximum value with upstream protection by Siemens circuit breaker
Conditional short-circuit current (Icc)
kA rms
5.4
Siemens circuit breaker - Compact range
32
Reference number**
5SY6332-7
Maximum value with upstream protection by fuses (gL/gG)
Conditional short-circuit current (Icc)

Siemens fuse (gL/gG)
kA rms
17
40
030
035
045
055
075
105
0.6
4.5
0.6
4.5
1.26
6
1.26
6
1.26
6
2
10
7
7
7.7
7.7
6.1
10
40
40
50
63
80
100
5SY6340-7 5SY6340-7 5SY4350-7 5SY4363-8 5SP4380-7 5SP4391-7
50
40
50
40
50
63
50
63
14.5
80
22
125
* Earthing system type

** If another current limitation protection system is used, its time-current and thermal constraint (It) trip characteristics must be at least equivalent to those of the recommended Siemens circuit
breaker. Contact your nearest Carrier office.
The short-circuit stability current values above are in accordance with the TN system.
Electrical data and operating conditions notes:

61AF 022-105 units have a single power connection point located immediately
upstream of the main disconnect switch.
The control box includes the following standard features:

-a main disconnect switch,

-starter and motor protection devices for the compressor, the fan and the
pump,

-the control devices.
Field connections:

All connections to the system and the electrical installations must be in full
accordance with all applicable local codes.
The Carrier 61AF units are designed and built to ensure conformance with
these codes. The recommendations of European standard EN 602041
(machine safety electrical machine components part 1: general regulations
- corresponds to IEC 60204-1) are specifically taken into account, when
designing the electrical equipment.
Notes:
Generally the recommendations of IEC 60364 are accepted as compliance
with the requirements of the installation directives. Conformance with EN
60204-1 is the best means of ensuring compliance with the Machinery
Directive 1.5.1.
Annex B of EN 602041 describes the electrical characteristics used for the
operation of the machines.

1.
The operating environment for the 61AF units is specified below:

Environment* Environment as classified in EN 60721 (corresponds to
IEC 60721):
outdoor installation*
ambient temperature range: 20C to +40C, class 4K4H
altitude: 2000 m
presence of hard solids, class 4S2 (no significant dust present)
presence of corrosive and polluting substances, class 4C2 (negligible)
2. Power supply frequency variation: 2 Hz.
3. The neutral (N) conductor must not be connected directly to the unit (if
necessary use a transformer).
4. Overcurrent protection of the power supply conductors is not provided with
the unit.
5. The factory-installed disconnect switch is of a type suitable for power
interruption in accordance with EN 60947-3 (corresponds to IEC 60947-3)
6. The units are designed for connection to TN networks (IEC 60364). For IT
networks the earth connection must not be at the network earth. Provide a
local earth, consult competent local organisations to complete the electrical
installation.

Caution: If particular aspects of an actual installation do not conform to

the conditions described above, or if there are other conditions which
should be considered, always contact your local Carrier representative.
The required protection level for this class is IP43BW (according to reference
document IEC 60529). All 61AF units are protected to IP44CW and fulfil this
protection condition.
11
Operating limits
Plate heat exchanger water flow rate
Operating range
61AF
Condenser
Entering water temperature at start-up
Leaving water temperature during operation
Entering/leaving water temperature difference
Evaporator
Entering air temperature, standard unit*
Entering air temperature, unit with option 11
61AF
Minimum Maximum
C 8
C 30
K 3
57
65
**
C -20
C -15
40
40
* Outside temperature: For transport and storage of the 61AF units the minimum and maximum
allowable temperatures are -20C and +50C. It is recommended that these temperatures
are used for transport by container.
** Refer to the minmum unit flow rate.
Note: Do not exceed the maximum operating temperature.
022
030
035
045
055
075
105
Maximum*
with hydronic module
1.6
1.7
3.3
3.3
3.2
5.9
6.1
Maximum**
without hydronic module
1.8
2.4
3.1
3.8
4.6
6.4
8.5
* Maximum flow rate at an available pressure of 15 kPa.

** Maximum flow rate at a water temperature difference of 3 K in the plate heat exchanger.

Note: For a domestic hot water application (leaving water temperature = 65C), the water
temperature difference must be at least 8 K for operation at 100% capacity.
70
65
0.75
Minimum water flow rate, l/s
55
50
45
40
35
25
20
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
30
1
2
3
-25 -20 -15 -10
-5
10
15 20
25
Entering air temperature, C

Full load
30
35 40
45
Leaving water temperature, C
60
1
2
25
35
45
55
65
61AF 022
61AF 030
61AF 035
1.30
1.25
1.20
1.15
1.10
1.05
1.00
0.95
0.90
0.85
0.80
25
35
45
55
65
61AF 045
61AF 055
2.40
2.20
2.00
1.80
1.60
1.40
1.20
1.00
1
2
12
25
61AF 075
61AF 105
35
45
55
65
Available static system pressure
Plate heat exchanger pressure drop - for pure water at 20C
61AF 022-045
61AF 055-105
30
50
3
Pressure drop, kPa
20
15
40
4
Pressure drop, kPa
25
10
1
20
10
5
0
30
0
0
1
2
3
4
1
61AF 022
61AF 030
61AF 035
61AF 045
Water flow rate, l/s
10

1
2
3
61AF 055
61AF 075
61AF 105
13
Available static system pressure (cont.)
Pump pressure/flow rate curves for units with hydronic module - for pure water at 20C
The speed initially selected corresponds to standard use
for heating water loops. If this speed needs to be changed,
the pressure/flow curves for the three speeds are shown
below.
The 61AF units are equipped with a fixed-speed pump

with three different speeds. These speeds can be manually
adjusted by changing the speed terminal board inside the
terminal box (this operation can only be carried out by
approved personnel).
61AF 022-030
61AF 035-055
120
100
100
Presssure head, kPa
80
Presssure head, kPa
120
60
40
20
0
1
2
3
0,2
0,4
0,6
0,8
1,0
1,2
Water flow rate,

1 l/s
1,4
1,6
1,8
Presssure head, kPa
60
40
20
0
14
0
1
2
3
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
61AF 075-105 (speed 1)

61AF 075-105 (speed 2)
61AF 075-105 (speed 3): selected
60
40
3
2
2,0
61AF 075-105
80
4,5
5,0
5,5
80
20
61AF 022-030 (speed 1)

61AF 022-030 (speed 2)
100
6,0
6,5
0
1
2
3
0,4
0,8
1,2
1,6
2,0
61AF 035-055 (speed 1)

61AF 035-055 (speed 2)
2,4
2,8
3,2
Available static system pressure (cont.)
Available system pressure for units with hydronic module - for pure water at 20C
The available pressure curves for the 61AF units are given
for the speed initially selected. If the speed is changed by
the user, the curves below do not apply.
61AF
022
030
035
045
055
075
105
61AF 022-030
* Maximum flow rate at an available pressure of 15 kPa (unit with hydronic module).
61AF 035-055
120
100
110
90
Available pressure, kPa
100
80
90
70
80
60
70
50
60
40
50
40
Maximum condenser water flow rate, l/s

1.6
1.7
3.3
3.3
3.2
5.9
8.5
0.4
1
2
0.6
0.8
1.0
1.2
1.4
1.6
1.8
30
0.5
1.0
1.5
2.0
2.5
3.0
3.5
61AF 022
61AF 030
1
2
3
61AF 035
61AF 045
61AF 055
61AF 075-105
100
80
60
40
20
0
1
2
61AF 075
61AF 105
15
Dimensions/clearances
61AF 022-035 units with and without hydronic module
1110
300
1330
1327
1000
1000
1000
Legend
1000
All dimensions are in mm

Required clearances for air flow

Recommended space for maintenance
Water inlet
Water outlet
Air outlet, do not obstruct

Control box
Power cable connection
2100
300
1330
1114
1000
1000
NOTES:
Non-certified drawings.
Refer to the certified dimensional drawings supplied with the unit or
available on request, when designing an installation. For the location
of fixing points, weight distribution and coordinates of the centre of
gravity refer to the certified dimensional drawings.
B In multiple-unit installations (maximum four units), the side clearance
between the units should be increased from 1000 to 2000 mm.
C The height of the solid surface must not exceed 2 m.
1000
16
1000
2273
300
1330
2100
2053
1000
2261
1000
1
Legend


Water inlet
1000
1000
Water outlet

61AF 022-035 with option 11, units with and without hydronic module

Control box
1327
300
1371
1110
1280
1000
1000
1
1000
NOTES:
available on request, when designing an installation. For the location of
fixing points, weight distribution and coordinates of the centre of gravity
refer to the certified dimensional drawings.
B In multiple-unit installations (maximum four units), the side clearance
C The height of the solid surface must not exceed 2 m.
A

1000
17
1114
300
1371
2079
1000
1000
1
Legend

Water inlet
1000
Water outlet

1000

Control box
2273
300
1371
2100
1000
1000
1000
18
1000
NOTES:
available on request, when designing an installation. For the location of fixing
points, weight distribution and coordinates of the centre of gravity refer to
the certified dimensional drawings.
In multiple-unit installations (maximum four units), the side clearance
The height of the solid surface must not exceed 2 m.
Heating capacities in accordance with EN14511-3 : 2011

61AF 022-105
Outside air dry-bulb (wet-bulb) temperature, C
-20 (-20,5)
-15 (-16)
-10 (-11)
LWT Qh COP q
p Qh COP q
p Qh COP q
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105

kW
30
9.0
10.5
13.5
18.0
21.8
28.1
41.8
9.0
10.5
13.4
18.1
21.8
27.9
41.9
8.9
10.5
13.2
18.1
21.7
27.7
42.0
9.0
10.6
13.3
18.5
22.1
28.1
42.9
9.1
10.7
13.3
18.8
22.3
28.2
43.4
9.2
10.7
13.4
19.0
22.4
28.3
43.7
9.3
10.8
13.4
19.3
22.7
28.4
44.3
9.6
10.9
13.5
19.7
23.0
28.8
45.1
35
40
45
50
55
60
65
kW/
kW
1.95
1.95
2.05
2.25
2.33
2.04
2.21
1.84
1.85
1.92
2.11
2.18
1.91
2.08
1.72
1.73
1.78
1.97
2.03
1.78
1.95
1.65
1.67
1.70
1.88
1.94
1.70
1.88
1.55
1.58
1.59
1.77
1.83
1.60
1.78
1.51
1.53
1.54
1.72
1.78
1.54
1.74
1.45
1.47
1.47
1.64
1.71
1.47
1.67
1.38
1.41
1.39
1.55
1.63
1.39
1.60
l/s
kPa
kW
0.49
0.58
0.74
0.99
1.19
1.54
2.29
0.49
0.58
0.73
0.99
1.20
1.53
2.30
0.49
0.58
0.73
1.00
1.20
1.53
2.31
0.49
0.58
0.73
1.01
1.21
1.53
2.34
0.50
0.58
0.73
1.02
1.22
1.53
2.37
0.31
0.37
0.46
0.65
0.77
0.96
1.49
0.25
0.30
0.37
0.53
0.62
0.78
1.21
0.26
0.30
0.37
0.54
0.63
0.79
1.23
1.2
1.1
1.5
1.8
2.0
2.2
3.5
1.2
1.1
1.4
1.8
1.9
2.1
3.5
1.2
1.1
1.4
1.8
1.9
2.1
3.4
1.2
1.1
1.3
1.8
1.9
2.0
3.4
1.1
1.1
1.3
1.8
1.9
2.0
3.4
0.5
0.4
0.6
0.8
0.8
0.8
1.4
0.3
0.3
0.4
0.5
0.5
0.6
0.9
0.3
0.3
0.4
0.5
0.5
0.6
0.9
10.3
12.1
15.5
20.5
25.1
32.3
47.2
10.2
12.1
15.3
20.6
25.0
32.1
47.4
10.1
12.0
15.0
20.4
24.7
31.5
47.1
10.2
12.1
15.1
20.7
25.1
31.8
48.0
10.3
12.2
15.1
21.0
25.3
31.9
48.6
10.4
12.2
15.1
21.2
25.5
32.1
49.1
10.5
12.3
15.2
21.5
25.8
32.3
49.8
10.8
12.4
15.3
21.9
26.2
32.7
50.8
Legend
LWT Leaving water temperature, C
Qh
Heating capacity, kW
COP Coefficient of performance, kW/kW
q
Condenser water flow rate, l/s
p
Condenser pressure drop, kPa
kW/
kW
2.20
2.19
2.29
2.49
2.58
2.29
2.42
2.06
2.06
2.13
2.32
2.39
2.13
2.26
1.90
1.91
1.95
2.14
2.20
1.96
2.09
1.81
1.83
1.84
2.02
2.08
1.85
1.99
1.69
1.72
1.72
1.89
1.95
1.73
1.88
1.64
1.66
1.66
1.83
1.88
1.67
1.82
1.56
1.59
1.58
1.75
1.79
1.58
1.74
1.48
1.50
1.48
1.64
1.69
1.49
1.65
l/s
kPa
kW
0.58
0.68
0.86
1.15
1.40
1.81
2.64
0.57
0.68
0.86
1.15
1.40
1.79
2.65
0.57
0.68
0.85
1.16
1.40
1.79
2.67
0.57
0.68
0.85
1.17
1.41
1.79
2.70
0.58
0.68
0.85
1.18
1.42
1.80
2.73
0.36
0.43
0.53
0.74
0.90
1.13
1.72
0.30
0.35
0.43
0.60
0.72
0.91
1.40
0.30
0.35
0.43
0.62
0.74
0.92
1.43
1.6
1.5
2.0
2.4
2.6
3.0
4.6
1.6
1.5
1.9
2.4
2.6
2.9
4.6
1.5
1.5
1.8
2.3
2.5
2.8
4.5
1.5
1.5
1.8
2.3
2.5
2.7
4.5
1.5
1.4
1.7
2.3
2.5
2.7
4.5
0.6
0.6
0.7
1.0
1.0
1.1
1.9
0.4
0.4
0.5
0.7
0.7
0.7
1.2
0.4
0.4
0.5
0.7
0.7
0.7
1.2
11.5
13.7
17.5
23.2
28.4
36.6
53.5
11.5
13.7
17.3
23.1
28.3
36.4
53.5
11.2
13.4
16.8
22.6
27.7
35.4
52.5
11.2
13.5
16.8
22.9
27.9
35.5
53.1
11.4
13.5
16.8
23.1
28.2
35.6
53.7
11.5
13.6
16.8
23.3
28.4
35.8
54.1
11.6
13.6
16.9
23.6
28.7
36.0
54.9
11.9
13.8
17.0
24.0
29.2
36.5
56.0
kW/
kW
2.47
2.44
2.54
2.75
2.86
2.55
2.68
2.30
2.29
2.35
2.55
2.64
2.36
2.48
2.09
2.09
2.12
2.31
2.38
2.14
2.26
1.97
1.98
1.99
2.17
2.23
2.01
2.13
1.83
1.85
1.85
2.01
2.07
1.87
1.98
1.77
1.79
1.78
1.95
1.99
1.80
1.92
1.68
1.70
1.69
1.85
1.88
1.70
1.82
1.57
1.60
1.57
1.72
1.76
1.59
1.72
-7 (-8)
Qh COP q
l/s
kPa
kW
0.66
0.79
1.01
1.33
1.63
2.10
3.08
0.66
0.79
1.00
1.33
1.63
2.09
3.08
0.66
0.79
0.99
1.33
1.63
2.08
3.08
0.66
0.79
0.98
1.34
1.63
2.08
3.11
0.66
0.79
0.98
1.35
1.65
2.08
3.14
0.42
0.50
0.61
0.85
1.04
1.31
1.98
0.34
0.40
0.49
0.69
0.84
1.05
1.60
0.35
0.40
0.50
0.70
0.85
1.06
1.63
2.1
2.0
2.6
3.2
3.5
4.0
6.2
2.1
2.0
2.5
3.1
3.4
3.8
6.0
2.0
1.9
2.4
3.0
3.3
3.7
5.9
2.0
1.9
2.3
3.0
3.2
3.6
5.9
1.9
1.9
2.2
3.0
3.2
3.5
5.9
0.8
0.8
1.0
1.3
1.4
1.5
2.4
0.6
0.5
0.6
0.9
0.9
1.0
1.6
0.6
0.5
0.6
0.9
0.9
1.0
1.6
12.3
14.7
18.8
24.9
30.5
39.3
57.5
12.3
14.7
18.6
24.9
30.4
39.1
57.4
11.9
14.3
18.0
24.1
29.5
37.8
56.0
11.9
14.3
17.9
24.2
29.6
37.8
56.3
12.0
14.3
17.9
24.4
29.9
37.9
57.0
12.1
14.4
17.9
24.6
30.2
38.1
57.5
12.3
14.5
18.0
24.9
30.5
38.3
58.3
12.6
14.6
18.1
25.3
31.1
38.8
59.5
kW/
kW
2.63
2.60
2.70
2.91
3.03
2.72
2.84
2.45
2.43
2.49
2.69
2.79
2.51
2.63
2.21
2.21
2.23
2.42
2.50
2.25
2.37
2.07
2.07
2.08
2.25
2.32
2.10
2.22
1.92
1.93
1.92
2.08
2.14
1.95
2.06
1.85
1.87
1.86
2.02
2.06
1.87
1.99
1.75
1.77
1.75
1.91
1.95
1.77
1.89
1.63
1.65
1.63
1.77
1.81
1.65
1.77
2 (1)
Qh COP q
l/s
kPa
kW
0.72
0.86
1.10
1.46
1.78
2.30
3.36
0.72
0.86
1.09
1.45
1.78
2.28
3.36
0.71
0.86
1.08
1.45
1.77
2.27
3.36
0.71
0.86
1.07
1.45
1.78
2.26
3.38
0.72
0.86
1.07
1.46
1.79
2.27
3.41
0.45
0.54
0.67
0.92
1.13
1.42
2.15
0.37
0.43
0.54
0.74
0.91
1.14
1.74
0.37
0.43
0.54
0.75
0.92
1.15
1.77
2.5
2.4
3.0
3.7
4.1
4.7
7.3
2.4
2.3
2.9
3.6
4.0
4.5
7.1
2.3
2.3
2.8
3.5
3.9
4.3
7.0
2.3
2.2
2.7
3.5
3.8
4.2
6.9
2.3
2.2
2.6
3.4
3.8
4.1
6.9
0.9
0.9
1.1
1.5
1.6
1.7
2.8
0.6
0.6
0.7
1.0
1.1
1.1
1.8
0.6
0.6
0.7
1.0
1.1
1.1
1.9
15.2
18.5
23.6
31.6
37.9
49.5
72.5
15.1
18.5
23.4
31.3
38.0
49.1
72.3
14.9
18.3
23.0
31.0
37.9
48.4
71.7
14.9
18.1
22.7
30.8
37.7
48.2
71.7
14.9
18.0
22.6
30.8
37.8
48.0
71.9
15.0
17.9
22.5
30.7
37.8
48.0
72.0
15.0
17.8
22.5
30.8
38.0
48.0
72.5
15.3
17.7
22.5
31.0
38.5
48.3
73.5
kW/
kW
3.38
3.34
3.39
3.58
3.66
3.43
3.50
3.13
3.09
3.10
3.29
3.39
3.14
3.23
2.87
2.84
2.82
3.00
3.11
2.87
2.97
2.62
2.60
2.56
2.73
2.83
2.62
2.72
2.38
2.38
2.33
2.48
2.57
2.39
2.48
2.29
2.29
2.25
2.40
2.46
2.29
2.39
2.14
2.14
2.10
2.25
2.29
2.14
2.24
1.96
1.96
1.92
2.05
2.10
1.97
2.06
7 (6)
Qh
COP q
l/s
kPa
kW
0.91
1.11
1.41
1.89
2.27
2.96
4.33
0.90
1.11
1.40
1.87
2.27
2.93
4.32
0.90
1.10
1.38
1.86
2.28
2.91
4.31
0.90
1.09
1.37
1.86
2.27
2.90
4.31
0.90
1.08
1.36
1.85
2.28
2.90
4.33
0.56
0.68
0.85
1.16
1.43
1.81
2.72
0.45
0.54
0.68
0.93
1.15
1.45
2.19
0.46
0.54
0.68
0.94
1.16
1.46
2.22
3.8
3.8
4.7
5.9
6.3
7.4
11.9
3.7
3.7
4.5
5.7
6.2
7.1
11.5
3.5
3.6
4.3
5.5
6.1
6.9
11.2
3.5
3.5
4.2
5.4
5.9
6.7
11.0
3.4
3.4
4.0
5.3
5.8
6.5
10.8
1.4
1.4
1.7
2.2
2.4
2.7
4.4
0.9
0.9
1.1
1.5
1.6
1.8
2.9
1.0
0.9
1.1
1.5
1.6
1.7
2.9
21.1
26.5
32.6
44.4
52.3
64.3
102.2
20.8
26.2
32.6
44.2
52.1
64.9
101.9
20.8
26.0
32.6
44.1
52.2
65.8
101.9
20.8
25.7
32.3
43.8
52.3
66.9
101.9
20.9
25.4
32.0
43.6
52.7
68.1
102.0
20.9
25.3
31.9
43.5
52.9
68.0
102.0
21.0
25.1
31.8
43.4
53.3
67.9
102.3
21.2
24.8
31.7
43.4
54.0
68.0
103.1
kW/
kW
4.48
4.52
4.45
4.71
4.73
4.29
4.59
4.11
4.14
4.07
4.31
4.35
3.97
4.24
3.77
3.78
3.72
3.93
3.99
3.68
3.91
3.44
3.45
3.37
3.56
3.64
3.41
3.58
3.13
3.13
3.04
3.21
3.32
3.15
3.27
3.02
3.02
2.94
3.13
3.19
3.02
3.15
2.81
2.81
2.74
2.92
2.98
2.82
2.94
2.54
2.55
2.49
2.64
2.71
2.58
2.69
l/s
kPa
1.01
1.27
1.57
2.13
2.51
3.08
4.90
1.00
1.26
1.57
2.12
2.50
3.12
4.89
1.00
1.25
1.57
2.12
2.51
3.17
4.90
1.00
1.24
1.56
2.11
2.52
3.22
4.91
1.01
1.23
1.55
2.10
2.54
3.28
4.92
0.63
0.76
0.97
1.31
1.60
2.06
3.08
0.51
0.61
0.77
1.05
1.29
1.65
2.48
0.52
0.60
0.77
1.05
1.31
1.65
2.50
4.6
4.9
5.7
7.4
7.6
8.0
15.0
4.4
4.7
5.5
7.2
7.4
8.0
14.6
4.3
4.6
5.4
7.0
7.3
8.0
14.3
4.2
4.4
5.2
6.8
7.2
8.1
14.0
4.2
4.2
5.1
6.6
7.1
8.2
13.8
1.8
1.7
2.1
2.8
3.0
3.4
5.6
1.2
1.1
1.4
1.8
2.0
2.2
3.6
1.2
1.1
1.4
1.8
2.0
2.2
3.6
Application data
Standard units, refrigerant: R-407C

Condenser entering/leaving water temperature difference: 5 K for LWT values <55C
Condenser entering/leaving water temperature difference: 8 K for LWT values = 55C
Condenser entering/leaving water temperature difference: 10 K for LWT values >55C
Condenser fluid: water
Fouling factor: 0.18 x 10-4 (m2 K)/W
Performances in accordance with EN14511-3:2011.
19
Heating capacities
61AF 022-105
-20 (-20,5)
-15 (-16)
-10 (-11)
LWT Qh COP q
p
Qh COP q
p
Qh COP q
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105

20
kW
30
10.3
12.0
15.3
20.5
24.9
32.0
47.6
10.2
12.0
15.2
20.6
24.9
31.8
47.8
10.2
12.0
15.1
20.7
24.9
31.7
48.0
10.2
12.0
15.1
20.9
25.0
31.7
48.4
10.3
12.1
15.0
21.2
25.2
31.8
48.9
10.4
12.1
15.1
21.4
25.3
31.9
49.3
10.5
12.2
15.1
21.7
25.5
32.1
49.9
10.8
12.3
15.2
22.2
25.9
32.4
50.8
35
40
45
50
55
60
65
kW/
kW
2.19
2.19
2.30
2.53
2.61
2.29
2.48
2.06
2.07
2.15
2.36
2.44
2.14
2.33
1.94
1.95
2.01
2.22
2.29
2.01
2.20
1.82
1.85
1.88
2.08
2.15
1.88
2.08
1.72
1.75
1.76
1.95
2.03
1.76
1.97
1.67
1.69
1.70
1.89
1.96
1.70
1.92
1.60
1.63
1.62
1.81
1.88
1.62
1.85
1.52
1.55
1.53
1.71
1.79
1.53
1.76
l/s
kPa
kW
0.49
0.58
0.74
0.99
1.19
1.54
2.29
0.49
0.58
0.73
0.99
1.20
1.53
2.30
0.49
0.58
0.73
1.00
1.20
1.53
2.31
0.49
0.58
0.73
1.01
1.21
1.53
2.34
0.50
0.58
0.73
1.02
1.22
1.53
2.37
0.31
0.37
0.46
0.65
0.77
0.96
1.49
0.25
0.30
0.37
0.53
0.62
0.78
1.21
0.26
0.30
0.37
0.54
0.63
0.79
1.23
1.2
1.1
1.5
1.8
2.0
2.2
3.5
1.2
1.1
1.4
1.8
1.9
2.1
3.5
1.2
1.1
1.4
1.8
1.9
2.1
3.4
1.2
1.1
1.3
1.8
1.9
2.0
3.4
1.1
1.1
1.3
1.8
1.9
2.0
3.4
0.5
0.4
0.6
0.8
0.8
0.8
1.4
0.3
0.3
0.4
0.5
0.5
0.6
0.9
0.3
0.3
0.4
0.5
0.5
0.6
0.9
12.0
14.1
18.0
23.9
29.2
37.6
54.9
11.9
14.1
17.8
23.9
29.1
37.3
55.1
11.8
14.1
17.7
24.0
29.1
37.1
55.4
11.9
14.1
17.6
24.2
29.2
37.1
55.9
12.0
14.2
17.6
24.4
29.4
37.1
56.5
12.0
14.2
17.6
24.6
29.6
37.2
57.0
12.2
14.2
17.6
24.9
29.9
37.4
57.7
12.5
14.4
17.7
25.4
30.3
37.8
58.8
Legend
Qh
q
p
kW/
kW
2.52
2.51
2.62
2.86
2.96
2.62
2.77
2.35
2.36
2.43
2.66
2.74
2.43
2.59
2.20
2.22
2.26
2.48
2.55
2.26
2.42
2.06
2.08
2.10
2.31
2.37
2.11
2.27
1.93
1.95
1.96
2.15
2.22
1.97
2.14
1.86
1.89
1.89
2.08
2.13
1.89
2.07
1.77
1.80
1.79
1.98
2.03
1.80
1.98
1.67
1.70
1.68
1.86
1.91
1.69
1.88
l/s
kPa
kW
0.58
0.68
0.86
1.15
1.40
1.81
2.64
0.57
0.68
0.86
1.15
1.40
1.79
2.65
0.57
0.68
0.85
1.16
1.40
1.79
2.67
0.57
0.68
0.85
1.17
1.41
1.79
2.70
0.58
0.68
0.85
1.18
1.42
1.80
2.73
0.36
0.43
0.53
0.74
0.90
1.13
1.72
0.30
0.35
0.43
0.60
0.72
0.91
1.40
0.30
0.35
0.43
0.62
0.74
0.92
1.43
1.6
1.5
2.0
2.4
2.6
3.0
4.6
1.6
1.5
1.9
2.4
2.6
2.9
4.6
1.5
1.5
1.8
2.3
2.5
2.8
4.5
1.5
1.5
1.8
2.3
2.5
2.7
4.5
1.5
1.4
1.7
2.3
2.5
2.7
4.5
0.6
0.6
0.7
1.0
1.0
1.1
1.9
0.4
0.4
0.5
0.7
0.7
0.7
1.2
0.4
0.4
0.5
0.7
0.7
0.7
1.2
13.8
16.4
21.0
27.7
34.0
43.8
64.0
13.7
16.4
20.7
27.6
33.8
43.5
63.9
13.6
16.4
20.5
27.6
33.8
43.2
64.0
13.7
16.4
20.4
27.8
33.9
43.1
64.3
13.7
16.4
20.3
28.0
34.1
43.1
64.9
13.8
16.4
20.3
28.1
34.2
43.1
65.3
14.0
16.4
20.3
28.4
34.6
43.3
66.0
14.3
16.5
20.4
28.8
35.1
43.7
67.1
kW/
kW
2.89
2.86
2.98
3.22
3.35
2.99
3.14
2.69
2.68
2.75
2.98
3.08
2.76
2.91
2.49
2.50
2.53
2.76
2.84
2.55
2.69
2.32
2.33
2.34
2.55
2.62
2.36
2.50
2.15
2.18
2.17
2.36
2.43
2.19
2.33
2.07
2.10
2.09
2.29
2.33
2.10
2.25
1.97
1.99
1.97
2.16
2.20
1.99
2.14
1.84
1.87
1.83
2.01
2.06
1.86
2.01
l/s
0.66
0.79
1.01
1.33
1.63
2.10
3.08
0.66
0.79
1.00
1.33
1.63
2.09
3.08
0.66
0.79
0.99
1.33
1.63
2.08
3.08
0.66
0.79
0.98
1.34
1.63
2.08
3.11
0.66
0.79
0.98
1.35
1.65
2.08
3.14
0.42
0.50
0.61
0.85
1.04
1.31
1.98
0.34
0.40
0.49
0.69
0.84
1.05
1.60
0.35
0.40
0.50
0.70
0.85
1.06
1.63
-7 (-8)
Qh COP q
2 (1)
Qh COP q
7 (6)
Qh
COP q
2.1
2.0
2.6
3.2
3.5
4.0
6.2
2.1
2.0
2.5
3.1
3.4
3.8
6.0
2.0
1.9
2.4
3.0
3.3
3.7
5.9
2.0
1.9
2.3
3.0
3.2
3.6
5.9
1.9
1.9
2.2
3.0
3.2
3.5
5.9
0.8
0.8
1.0
1.3
1.4
1.5
2.4
0.6
0.5
0.6
0.9
0.9
1.0
1.6
0.6
0.5
0.6
0.9
0.9
1.0
1.6
15.0
17.9
22.9
30.3
37.1
47.9
70.0
14.9
17.9
22.6
30.2
36.9
47.5
69.8
14.8
17.8
22.4
30.1
36.8
47.1
69.8
14.8
17.8
22.2
30.1
36.9
46.9
70.0
14.9
17.8
22.1
30.2
37.1
46.9
70.6
14.9
17.8
22.1
30.4
37.2
47.0
71.0
15.1
17.8
22.1
30.6
37.5
47.1
71.7
15.4
17.8
22.1
31.0
38.1
47.5
72.8
2.5
2.4
3.0
3.7
4.1
4.7
7.3
2.4
2.3
2.9
3.6
4.0
4.5
7.1
2.3
2.3
2.8
3.5
3.9
4.3
7.0
2.3
2.2
2.7
3.5
3.8
4.2
6.9
2.3
2.2
2.6
3.4
3.8
4.1
6.9
0.9
0.9
1.1
1.5
1.6
1.7
2.8
0.6
0.6
0.7
1.0
1.1
1.1
1.8
0.6
0.6
0.7
1.0
1.1
1.1
1.9
18.9
23.1
29.4
39.2
47.2
61.5
90.2
18.8
23.0
29.0
38.9
47.2
60.9
89.7
18.6
22.8
28.7
38.6
47.2
60.5
89.4
18.6
22.6
28.4
38.5
47.1
60.1
89.4
18.6
22.4
28.2
38.4
47.1
59.9
89.6
18.6
22.4
28.1
38.3
47.2
59.9
89.8
18.8
22.2
28.0
38.4
47.4
59.9
90.4
19.0
22.1
28.0
38.6
47.9
60.1
91.5
3.8
3.8
4.7
5.9
6.3
7.4
11.9
3.7
3.7
4.5
5.7
6.2
7.1
11.5
3.5
3.6
4.3
5.5
6.1
6.9
11.2
3.5
3.5
4.2
5.4
5.9
6.7
11.0
3.4
3.4
4.0
5.3
5.8
6.5
10.8
1.4
1.4
1.7
2.2
2.4
2.7
4.4
0.9
0.9
1.1
1.5
1.6
1.8
2.9
1.0
0.9
1.1
1.5
1.6
1.7
2.9
21.1
26.4
32.6
44.3
52.2
64.1
101.9
20.8
26.2
32.5
44.1
52.0
64.8
101.6
20.7
25.9
32.5
44.0
52.1
65.7
101.6
20.8
25.7
32.3
43.7
52.2
66.8
101.7
20.9
25.4
32.0
43.5
52.6
67.9
101.7
20.9
25.3
31.9
43.5
52.8
67.9
101.9
21.0
25.1
31.8
43.4
53.3
67.9
102.3
21.2
24.8
31.6
43.4
54.0
68.0
103.1
4.6
4.9
5.7
7.4
7.6
8.0
15.0
4.4
4.7
5.5
7.2
7.4
8.0
14.6
4.3
4.6
5.4
7.0
7.3
8.0
14.3
4.2
4.4
5.2
6.8
7.2
8.1
14.0
4.2
4.2
5.1
6.6
7.1
8.2
13.8
1.8
1.7
2.1
2.8
3.0
3.4
5.6
1.2
1.1
1.4
1.8
2.0
2.2
3.6
1.2
1.1
1.4
1.8
2.0
2.2
3.6
kPa
kW
kW/
kW
3.13
3.09
3.21
3.46
3.60
3.23
3.38
2.90
2.88
2.95
3.19
3.31
2.97
3.12
2.68
2.68
2.71
2.94
3.04
2.74
2.88
2.48
2.49
2.50
2.71
2.79
2.53
2.66
2.29
2.31
2.30
2.50
2.57
2.34
2.47
2.21
2.23
2.22
2.41
2.46
2.24
2.38
2.09
2.11
2.09
2.28
2.32
2.11
2.25
1.94
1.97
1.93
2.11
2.15
1.97
2.10
l/s
0.72
0.86
1.10
1.46
1.78
2.30
3.36
0.72
0.86
1.09
1.45
1.78
2.28
3.36
0.71
0.86
1.08
1.45
1.77
2.27
3.36
0.71
0.86
1.07
1.45
1.78
2.26
3.38
0.72
0.86
1.07
1.46
1.79
2.27
3.41
0.45
0.54
0.67
0.92
1.13
1.42
2.15
0.37
0.43
0.54
0.74
0.91
1.14
1.74
0.37
0.43
0.54
0.75
0.92
1.15
1.77
kPa
kW
kW/
kW
4.08
4.03
4.10
4.33
4.43
4.15
4.23
3.76
3.72
3.72
3.95
4.08
3.78
3.89
3.44
3.41
3.38
3.60
3.74
3.45
3.57
3.14
3.12
3.08
3.28
3.40
3.15
3.27
2.86
2.86
2.80
2.98
3.09
2.87
2.99
2.74
2.74
2.69
2.88
2.95
2.74
2.87
2.56
2.56
2.51
2.69
2.75
2.56
2.68
2.34
2.35
2.30
2.45
2.51
2.36
2.47
l/s
0.91
1.11
1.41
1.89
2.27
2.96
4.33
0.90
1.11
1.40
1.87
2.27
2.93
4.32
0.90
1.10
1.38
1.86
2.28
2.91
4.31
0.90
1.09
1.37
1.86
2.27
2.90
4.31
0.90
1.08
1.36
1.85
2.28
2.90
4.33
0.56
0.68
0.85
1.16
1.43
1.81
2.72
0.45
0.54
0.68
0.93
1.15
1.45
2.19
0.46
0.54
0.68
0.94
1.16
1.46
2.22
kPa
kW
kW/
kW
4.51
4.55
4.48
4.74
4.76
4.32
4.64
4.13
4.16
4.09
4.34
4.38
3.99
4.28
3.79
3.80
3.73
3.95
4.01
3.70
3.94
3.46
3.46
3.38
3.57
3.66
3.43
3.60
3.14
3.14
3.06
3.23
3.33
3.17
3.28
3.02
3.02
2.95
3.14
3.20
3.03
3.16
2.81
2.81
2.74
2.92
2.98
2.82
2.95
2.55
2.55
2.49
2.64
2.71
2.58
2.69
l/s
1.01
1.27
1.57
2.13
2.51
3.08
4.90
1.00
1.26
1.57
2.12
2.50
3.12
4.89
1.00
1.25
1.57
2.12
2.51
3.17
4.90
1.00
1.24
1.56
2.11
2.52
3.22
4.91
1.01
1.23
1.55
2.10
2.54
3.28
4.92
0.63
0.76
0.97
1.31
1.60
2.06
3.08
0.51
0.61
0.77
1.05
1.29
1.65
2.48
0.52
0.60
0.77
1.05
1.31
1.65
2.50
Application data

kPa
Gross performances, not in accordance with EN14511-3:2011. These performances do not take
into account the correction for the proportional heating capacity and power input generated by the
Heating capacities in accordance with EN14511-3 : 2011

61AF 022-105
12 (11)
15 (14)
20 (19)
LWT Qh
COP q
p Qh
COP q
p Qh
COP q
C
022 30
030
035
045
055
075
105
022 35
030
035
045
055
075
105
022 40
030
035
045
055
075
105
022 45
030
035
045
055
075
105
022 50
030
035
045
055
075
105
022 55
030
035
045
055
075
105
022 60
030
035
045
055
075
105
022 65
030
035
045
055
075
105

kW
23.2
29.9
35.4
49.2
57.7
67.8
113.9
23.5
29.6
35.3
48.8
57.2
68.2
112.9
23.2
29.3
35.3
48.6
57.2
68.9
112.6
23.0
29.0
35.4
48.6
57.4
69.7
112.8
22.9
28.6
35.5
48.7
57.7
70.7
113.3
22.9
28.4
35.5
48.7
57.8
71.1
113.5
23.1
28.1
35.7
48.8
58.3
72.3
114.1
23.4
27.7
35.6
48.7
59.0
74.1
115.4
kW/
kW
4.87
5.03
4.77
5.08
5.04
4.51
4.94
4.55
4.59
4.34
4.61
4.64
4.15
4.56
4.14
4.18
3.96
4.20
4.26
3.83
4.20
3.75
3.80
3.60
3.80
3.88
3.53
3.85
3.38
3.43
3.27
3.44
3.53
3.25
3.52
3.26
3.31
3.18
3.37
3.40
3.14
3.42
3.03
3.07
2.98
3.14
3.17
2.96
3.20
2.74
2.77
2.69
2.82
2.87
2.74
2.93
l/s
kPa kW
1.11
1.44
1.70
2.36
2.77
3.25
5.46
1.13
1.42
1.70
2.34
2.75
3.28
5.41
1.12
1.41
1.70
2.34
2.75
3.31
5.41
1.11
1.40
1.70
2.34
2.76
3.36
5.43
1.11
1.38
1.71
2.35
2.78
3.41
5.46
0.69
0.86
1.07
1.47
1.75
2.15
3.43
0.56
0.68
0.87
1.18
1.41
1.75
2.76
0.57
0.67
0.87
1.18
1.43
1.80
2.80
5.5
6.2
6.6
8.9
9.1
8.9
18.4
5.5
5.9
6.4
8.6
8.8
8.8
17.7
5.3
5.7
6.2
8.3
8.6
8.7
17.3
5.1
5.5
6.1
8.2
8.5
8.7
17.0
5.0
5.2
6.1
8.0
8.4
8.8
16.8
2.1
2.1
2.6
3.4
3.5
3.7
6.8
1.4
1.4
1.7
2.3
2.4
2.5
4.5
1.4
1.3
1.7
2.2
2.4
2.6
4.5
Legend
Qh
q
p
23.3
32.0
37.2
52.3
60.8
69.9
121.3
23.7
31.6
37.0
51.8
60.6
70.3
120.1
24.1
31.2
37.0
51.5
60.4
71.0
119.3
24.5
30.9
37.0
51.4
60.5
71.8
119.4
24.5
30.6
37.2
51.4
60.8
72.8
119.9
24.5
30.4
37.2
51.4
60.9
73.2
120.0
24.5
30.1
37.4
51.5
61.3
74.2
120.6
24.6
29.6
37.7
51.8
62.1
75.7
121.8
kW/
kW
4.90
5.33
4.98
5.30
5.21
4.64
5.13
4.59
4.85
4.52
4.81
4.81
4.26
4.75
4.28
4.40
4.10
4.35
4.41
3.93
4.37
3.95
3.99
3.72
3.94
4.02
3.61
4.01
3.56
3.61
3.37
3.55
3.65
3.33
3.67
3.44
3.50
3.29
3.49
3.53
3.21
3.56
3.18
3.24
3.07
3.25
3.28
3.02
3.34
2.85
2.90
2.79
2.92
2.97
2.79
3.05
l/s
kPa
kW
1.12
1.53
1.79
2.50
2.92
3.35
5.81
1.14
1.52
1.78
2.49
2.91
3.38
5.76
1.16
1.50
1.78
2.48
2.90
3.41
5.73
1.18
1.49
1.78
2.47
2.91
3.46
5.75
1.18
1.48
1.79
2.48
2.93
3.51
5.78
0.74
0.92
1.12
1.55
1.84
2.21
3.62
0.59
0.73
0.91
1.25
1.49
1.80
2.92
0.60
0.72
0.92
1.26
1.51
1.84
2.96
5.6
7.0
7.2
9.9
10.0
9.4
20.8
5.6
6.7
7.0
9.5
9.7
9.3
19.9
5.6
6.4
6.8
9.2
9.5
9.2
19.3
5.7
6.2
6.7
9.0
9.3
9.2
18.9
5.6
5.9
6.6
8.9
9.2
9.3
18.7
2.3
2.4
2.8
3.8
3.9
3.9
7.6
1.5
1.6
1.9
2.5
2.6
2.6
5.0
1.5
1.5
1.9
2.5
2.6
2.7
5.0
23.5
35.1
40.4
55.7
64.1
73.5
123.7
23.8
34.8
40.1
56.3
64.2
73.9
124.9
24.2
34.5
40.0
56.5
64.5
74.5
126.5
24.8
34.1
40.0
56.2
65.1
75.3
128.4
25.4
33.7
40.1
56.2
66.0
76.4
130.9
25.7
33.5
40.1
56.1
66.2
76.8
131.3
26.3
33.2
40.2
56.2
66.6
77.8
131.8
32.8
40.6
56.4
67.3
79.3
132.9
kW/
kW
4.94
5.75
5.34
5.55
5.38
4.86
5.20
4.64
5.25
4.83
5.09
4.99
4.46
4.87
4.31
4.77
4.36
4.62
4.59
4.09
4.54
3.99
4.30
3.93
4.15
4.21
3.76
4.21
3.67
3.87
3.55
3.73
3.84
3.46
3.89
3.58
3.77
3.47
3.69
3.73
3.34
3.81
3.37
3.49
3.24
3.43
3.47
3.14
3.57
3.13
2.92
3.06
3.13
2.89
3.25
l/s
1.12
1.68
1.94
2.67
3.07
3.52
5.93
1.14
1.67
1.93
2.70
3.08
3.55
5.99
1.17
1.66
1.92
2.71
3.10
3.58
6.08
1.19
1.64
1.93
2.71
3.14
3.63
6.18
1.23
1.62
1.93
2.71
3.18
3.68
6.31
0.78
1.01
1.21
1.70
2.00
2.32
3.97
0.64
0.80
0.97
1.36
1.61
1.88
3.19
0.80
0.98
1.37
1.63
1.92
3.22
25 (24)
Qh
COP q
30 (29)
Qh
COP q
35 (34)
Qh
COP q
5.6
8.3
8.3
11.1
11.0
10.3
21.6
5.6
8.0
8.0
11.1
10.8
10.2
21.5
5.7
7.7
7.8
10.9
10.7
10.1
21.5
5.8
7.4
7.7
10.6
10.7
10.1
21.7
6.0
7.1
7.5
10.4
10.7
10.2
22.1
2.6
2.9
3.2
4.4
4.5
4.3
9.0
1.7
1.9
2.1
2.9
3.0
2.8
5.9
1.8
2.1
2.9
3.0
2.9
5.9
23.6
37.1
43.4
57.4
67.2
77.1
126.0
23.9
37.4
43.4
58.0
67.5
77.5
127.2
24.4
37.5
43.2
58.6
67.8
78.1
128.8
24.9
37.1
43.1
59.5
68.3
78.9
130.7
25.6
36.6
43.2
60.7
69.2
80.0
133.2
25.8
36.4
43.1
60.7
69.4
80.4
133.8
26.4
36.2
43.3
61.1
70.3
81.4
135.8
35.8
43.5
61.2
71.7
82.9
139.2
5.7
9.2
9.4
11.7
12.0
11.2
22.3
5.7
9.1
9.2
11.7
11.9
11.1
22.2
5.8
9.0
8.9
11.7
11.7
11.0
22.3
5.9
8.6
8.7
11.8
11.6
11.0
22.5
6.1
8.2
8.6
12.0
11.7
11.1
22.9
2.6
3.4
3.7
5.1
4.9
4.6
9.4
1.8
2.2
2.4
3.4
3.3
3.1
6.2
2.1
2.4
3.3
3.4
3.2
6.4
23.7
38.2
44.8
59.1
69.1
80.8
128.3
24.1
38.5
45.2
59.7
69.6
81.2
129.5
24.5
38.8
45.6
60.4
70.3
81.7
131.1
25.0
39.1
46.2
61.2
71.2
82.5
133.0
25.7
38.8
46.3
62.4
72.4
83.6
135.5
25.9
38.5
46.3
62.4
72.6
84.0
136.0
26.5
37.7
46.4
63.3
73.5
85.0
138.1
36.8
46.7
65.1
75.0
86.6
141.5
5.7
9.7
10.0
12.4
12.6
12.3
23.1
5.8
9.6
9.9
12.3
12.5
12.1
23.0
5.8
9.5
9.9
12.3
12.5
12.0
23.0
5.9
9.5
9.9
12.4
12.5
12.0
23.2
6.1
9.2
9.8
12.6
12.7
12.0
23.6
2.6
3.8
4.2
5.3
5.4
5.0
9.7
1.8
2.4
2.8
3.6
3.6
3.4
6.4
2.2
2.7
3.7
3.7
3.4
6.6
23.9
39.3
46.3
60.8
71.0
84.5
130.7
24.2
39.6
46.6
61.4
71.4
84.9
131.8
24.6
39.9
47.1
62.1
72.1
85.5
133.4
25.2
40.2
47.6
63.0
73.0
86.2
135.3
25.9
38.9
48.4
64.2
74.3
87.3
137.8
26.1
38.6
48.4
64.1
74.6
87.6
138.3
26.7
37.8
49.0
65.0
75.8
88.6
140.3
36.9
49.2
65.7
77.8
90.2
143.7
5.8
10.2
10.6
13.0
13.3
13.3
23.9
5.8
10.1
10.5
12.9
13.1
13.1
23.8
5.9
10.1
10.5
12.9
13.1
13.0
23.8
6.0
10.0
10.5
13.0
13.1
13.0
24.0
6.2
9.2
10.6
13.2
13.3
13.0
24.4
2.6
3.8
4.5
5.6
5.6
5.4
10.0
1.8
2.4
3.0
3.8
3.8
3.6
6.6
2.2
3.0
3.8
3.9
3.7
6.8
kPa kW
kW/
kW
4.99
6.03
5.68
5.67
5.52
5.09
5.26
4.68
5.56
5.14
5.19
5.14
4.66
4.94
4.35
5.09
4.62
4.73
4.74
4.26
4.60
4.02
4.59
4.15
4.29
4.34
3.91
4.26
3.69
4.11
3.73
3.88
3.95
3.59
3.94
3.61
4.03
3.66
3.87
3.85
3.47
3.86
3.39
3.74
3.41
3.61
3.59
3.25
3.65
3.33
3.06
3.20
3.26
2.99
3.36
l/s
1.13
1.78
2.08
2.75
3.22
3.70
6.04
1.15
1.79
2.08
2.78
3.24
3.72
6.10
1.17
1.80
2.07
2.82
3.26
3.75
6.19
1.20
1.78
2.07
2.86
3.29
3.80
6.29
1.23
1.76
2.08
2.93
3.34
3.86
6.42
0.78
1.10
1.30
1.83
2.10
2.43
4.04
0.64
0.88
1.05
1.48
1.70
1.97
3.29
0.87
1.06
1.48
1.74
2.01
3.38
kPa kW
kW/
kW
5.03
6.19
5.85
5.79
5.61
5.31
5.32
4.71
5.70
5.31
5.30
5.23
4.86
4.99
4.38
5.23
4.82
4.82
4.84
4.44
4.65
4.05
4.77
4.36
4.37
4.44
4.06
4.31
3.72
4.29
3.90
3.94
4.06
3.7
4.0
3.6
4.2
3.9
3.9
4.0
3.6
3.9
3.4
3.9
3.6
3.7
3.7
3.4
3.7
3.4
3.2
3.3
3.3
3.1
3.4
l/s
1.14
1.83
2.15
2.83
3.31
3.87
6.15
1.16
1.85
2.17
2.86
3.34
3.90
6.21
1.18
1.86
2.19
2.90
3.38
3.93
6.30
1.21
1.88
2.22
2.95
3.43
3.97
6.40
1.24
1.87
2.23
3.01
3.49
4.0
6.5
0.8
1.2
1.4
1.9
2.2
2.5
4.1
0.6
0.9
1.1
1.5
1.8
2.1
3.3
0.9
1.1
1.6
1.8
2.1
3.4
kPa kW
kW/
kW
5.10
6.30
6.00
5.90
5.70
5.50
5.40
4.80
5.80
5.46
5.40
5.31
5.06
5.05
4.42
5.35
4.94
4.91
4.92
4.62
4.71
4.08
4.88
4.46
4.44
4.51
4.21
4.36
3.75
4.30
4.01
3.99
4.12
3.84
4.03
3.66
4.23
3.98
4.00
4.03
3.72
3.96
3.43
3.89
3.71
3.74
3.77
3.49
3.74
3.45
3.31
3.33
3.42
3.20
3.45
l/s
1.10
1.90
2.20
2.90
3.40
4.00
6.30
1.20
1.90
2.24
2.95
3.43
4.08
6.32
1.19
1.92
2.26
2.98
3.47
4.11
6.41
1.21
1.93
2.29
3.03
3.52
4.15
6.51
1.25
1.87
2.33
3.10
3.58
4.21
6.64
0.79
1.17
1.46
1.94
2.25
2.65
4.18
0.65
0.92
1.19
1.57
1.83
2.15
3.40
0.90
1.19
1.60
1.89
2.19
3.49
Application data

kPa
Performances in accordance with EN14511-3:2011.
21
Heating capacities
61AF 022-105
12 (11)
15 (14)
20 (19)
LWT Qh
COP q
p Qh
COP q
p Qh
COP q
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105
022
030
035
045
055
075
105

22
kW
30
23.2
29.9
35.4
49.1
57.6
67.6
113.6
23.4
29.6
35.2
48.7
57.1
68.1
112.5
23.2
29.3
35.2
48.5
57.1
68.7
112.3
23.0
29.0
35.3
48.5
57.3
69.5
112.5
22.9
28.6
35.5
48.6
57.6
70.5
113.0
22.9
28.4
35.5
48.6
57.8
71.1
113.3
23.1
28.1
35.7
48.8
58.2
72.2
114.1
23.4
27.7
35.6
48.7
59.0
74.0
115.3
35
40
45
50
55
60
65
kW/
kW
4.91
5.07
4.81
5.12
5.09
4.54
4.99
4.59
4.62
4.37
4.65
4.67
4.18
4.60
4.17
4.21
3.98
4.22
4.28
3.85
4.24
3.77
3.82
3.62
3.83
3.91
3.54
3.88
3.39
3.45
3.28
3.45
3.55
3.26
3.55
3.27
3.32
3.19
3.38
3.41
3.14
3.42
3.03
3.08
2.98
3.15
3.17
2.96
3.20
2.75
2.77
2.69
2.83
2.88
2.75
2.93
l/s
kPa kW
1.11
1.44
1.70
2.36
2.77
3.25
5.46
1.13
1.42
1.70
2.34
2.75
3.28
5.41
1.12
1.41
1.70
2.34
2.75
3.31
5.41
1.11
1.40
1.70
2.34
2.76
3.36
5.43
1.11
1.38
1.71
2.35
2.78
3.41
5.46
0.69
0.86
1.07
1.47
1.75
2.15
3.43
0.56
0.68
0.87
1.18
1.41
1.75
2.76
0.57
0.67
0.87
1.18
1.43
1.80
2.80
5.5
6.2
6.6
8.9
9.1
8.9
18.4
5.5
5.9
6.4
8.6
8.8
8.8
17.7
5.3
5.7
6.2
8.3
8.6
8.7
17.3
5.1
5.5
6.1
8.2
8.5
8.7
17.0
5.0
5.2
6.1
8.0
8.4
8.8
16.8
2.1
2.1
2.6
3.4
3.5
3.7
6.8
1.4
1.4
1.7
2.3
2.4
2.5
4.5
1.4
1.3
1.7
2.2
2.4
2.6
4.5
Legend
Qh
q
p
23.3
31.9
37.2
52.1
60.7
69.8
121.0
23.6
31.6
37.0
51.7
60.5
70.2
119.8
24.0
31.2
36.9
51.4
60.2
70.8
119.0
24.5
30.8
37.0
51.3
60.4
71.6
119.1
24.5
30.5
37.1
51.3
60.7
72.6
119.6
24.5
30.4
37.2
51.3
60.9
73.2
119.8
24.5
30.1
37.4
51.5
61.3
74.2
120.5
24.6
29.6
37.7
51.7
62.1
75.6
121.7
kW/
kW
4.94
5.38
5.03
5.35
5.26
4.68
5.20
4.63
4.89
4.55
4.85
4.85
4.29
4.80
4.31
4.43
4.13
4.39
4.44
3.95
4.41
3.97
4.01
3.74
3.96
4.05
3.63
4.04
3.58
3.63
3.39
3.57
3.67
3.34
3.69
3.45
3.51
3.30
3.50
3.54
3.22
3.57
3.18
3.24
3.08
3.26
3.28
3.02
3.34
2.85
2.91
2.79
2.93
2.97
2.79
3.05
l/s
kPa kW
1.12
1.53
1.79
2.50
2.92
3.35
5.81
1.14
1.52
1.78
2.49
2.91
3.38
5.76
1.16
1.50
1.78
2.48
2.90
3.41
5.73
1.18
1.49
1.78
2.47
2.91
3.46
5.75
1.18
1.48
1.79
2.48
2.93
3.51
5.78
0.74
0.92
1.12
1.55
1.84
2.21
3.62
0.59
0.73
0.91
1.25
1.49
1.80
2.92
0.60
0.72
0.92
1.26
1.51
1.84
2.96
5.6
7.0
7.2
9.9
10.0
9.4
20.8
5.6
6.7
7.0
9.5
9.7
9.3
19.9
5.6
6.4
6.8
9.2
9.5
9.2
19.3
5.7
6.2
6.7
9.0
9.3
9.2
18.9
5.6
5.9
6.6
8.9
9.2
9.3
18.7
2.3
2.4
2.8
3.8
3.9
3.9
7.6
1.5
1.6
1.9
2.5
2.6
2.6
5.0
1.5
1.5
1.9
2.5
2.6
2.7
5.0
23.4
35.0
40.3
55.6
63.9
73.3
123.3
23.8
34.7
40.1
56.1
64.1
73.7
124.5
24.2
34.4
39.9
56.3
64.3
74.3
126.1
24.7
34.0
39.9
56.1
65.0
75.2
128.0
25.4
33.6
40.0
56.1
65.8
76.2
130.5
25.6
33.5
40.0
56.1
66.2
76.7
131.1
26.2
33.2
40.2
56.1
66.6
77.7
131.7
32.7
40.5
56.3
67.3
79.2
132.8
kW/
kW
4.98
5.82
5.39
5.61
5.43
4.90
5.27
4.67
5.30
4.87
5.14
5.04
4.49
4.93
4.34
4.81
4.39
4.66
4.63
4.12
4.59
4.02
4.34
3.96
4.19
4.24
3.78
4.25
3.69
3.90
3.57
3.75
3.87
3.47
3.93
3.59
3.78
3.48
3.70
3.74
3.34
3.82
3.37
3.50
3.24
3.44
3.47
3.14
3.57
3.13
2.92
3.07
3.13
2.89
3.26
l/s
25 (24)
Qh
COP q
kPa kW
1.12
1.68
1.94
2.67
3.07
3.52
5.93
1.14
1.67
1.93
2.70
3.08
3.55
5.99
1.17
1.66
1.92
2.71
3.10
3.58
6.08
1.19
1.64
1.93
2.71
3.14
3.63
6.18
1.23
1.62
1.93
2.71
3.18
3.68
6.31
0.78
1.01
1.21
1.70
2.00
2.32
3.97
0.64
0.80
0.97
1.36
1.61
1.88
3.19
0.80
0.98
1.37
1.63
1.92
3.22
5.6
8.3
8.3
11.1
11.0
10.3
21.6
5.6
8.0
8.0
11.1
10.8
10.2
21.5
5.7
7.7
7.8
10.9
10.7
10.1
21.5
5.8
7.4
7.7
10.6
10.7
10.1
21.7
6.0
7.1
7.5
10.4
10.7
10.2
22.1
2.6
2.9
3.2
4.4
4.5
4.3
9.0
1.7
1.9
2.1
2.9
3.0
2.8
5.9
1.8
2.1
2.9
3.0
2.9
5.9
23.5
37.0
43.3
57.3
67.1
77.0
125.6
23.9
37.3
43.3
57.8
67.3
77.4
126.8
24.3
37.4
43.1
58.5
67.6
77.9
128.4
24.9
37.0
43.0
59.4
68.1
78.7
130.3
25.5
36.5
43.1
60.5
69.0
79.8
132.8
25.8
36.4
43.1
60.6
69.4
80.3
133.6
26.4
36.2
43.2
61.0
70.2
81.3
135.7
35.7
43.5
61.2
71.7
82.9
139.1
kW/
kW
5.03
6.11
5.75
5.74
5.59
5.13
5.33
4.71
5.63
5.19
5.25
5.19
4.70
5.00
4.38
5.15
4.66
4.78
4.78
4.30
4.65
4.05
4.63
4.18
4.33
4.37
3.94
4.31
3.72
4.14
3.75
3.91
3.98
3.61
3.98
3.61
4.04
3.67
3.88
3.86
3.47
3.88
3.39
3.74
3.41
3.61
3.60
3.26
3.66
3.33
3.06
3.20
3.26
3.00
3.37
30 (29)
Qh
COP q
l/s
kPa
kW
1.13
1.78
2.08
2.75
3.22
3.70
6.04
1.15
1.79
2.08
2.78
3.24
3.72
6.10
1.17
1.80
2.07
2.82
3.26
3.75
6.19
1.20
1.78
2.07
2.86
3.29
3.80
6.29
1.23
1.76
2.08
2.93
3.34
3.86
6.42
0.78
1.10
1.30
1.83
2.10
2.43
4.04
0.64
0.88
1.05
1.48
1.70
1.97
3.29
0.87
1.06
1.48
1.74
2.01
3.38
5.7
9.2
9.4
11.7
12.0
11.2
22.3
5.7
9.1
9.2
11.7
11.9
11.1
22.2
5.8
9.0
8.9
11.7
11.7
11.0
22.3
5.9
8.6
8.7
11.8
11.6
11.0
22.5
6.1
8.2
8.6
12.0
11.7
11.1
22.9
2.6
3.4
3.7
5.1
4.9
4.6
9.4
1.8
2.2
2.4
3.4
3.3
3.1
6.2
2.1
2.4
3.3
3.4
3.2
6.4
23.7
38.1
44.7
59.0
68.9
80.6
127.9
24.0
38.4
45.1
59.5
69.4
81.0
129.1
24.5
38.7
45.5
60.2
70.1
81.6
130.7
25.0
39.0
46.0
61.1
71.0
82.3
132.6
25.7
38.7
46.2
62.3
72.2
83.4
135.0
25.9
38.5
46.2
62.3
72.6
83.9
135.9
26.5
37.7
46.4
63.2
73.4
84.9
138.0
36.8
46.7
65.0
74.9
86.5
141.3
kW/
kW
5.08
6.27
5.92
5.86
5.67
5.37
5.40
4.75
5.77
5.37
5.36
5.29
4.90
5.06
4.42
5.29
4.87
4.87
4.89
4.48
4.71
4.08
4.82
4.39
4.40
4.48
4.09
4.36
3.74
4.33
3.93
3.97
4.09
3.7
4.0
3.6
4.2
3.9
3.9
4.0
3.6
3.9
3.4
3.9
3.6
3.7
3.7
3.4
3.7
3.4
3.2
3.3
3.3
3.1
3.4
l/s
35 (34)
Qh
COP q
kPa kW
1.14
1.83
2.15
2.83
3.31
3.87
6.15
1.16
1.85
2.17
2.86
3.34
3.90
6.21
1.18
1.86
2.19
2.90
3.38
3.93
6.30
1.21
1.88
2.22
2.95
3.43
3.97
6.40
1.24
1.87
2.23
3.01
3.49
4.0
6.5
0.8
1.2
1.4
1.9
2.2
2.5
4.1
0.6
0.9
1.1
1.5
1.8
2.1
3.3
0.9
1.1
1.6
1.8
2.1
3.4
5.7
9.7
10.0
12.4
12.6
12.3
23.1
5.8
9.6
9.9
12.3
12.5
12.1
23.0
5.8
9.5
9.9
12.3
12.5
12.0
23.0
5.9
9.5
9.9
12.4
12.5
12.0
23.2
6.1
9.2
9.8
12.6
12.7
12.0
23.6
2.6
3.8
4.2
5.3
5.4
5.0
9.7
1.8
2.4
2.8
3.6
3.6
3.4
6.4
2.2
2.7
3.7
3.7
3.4
6.6
23.8
39.2
46.2
60.7
70.8
84.3
130.2
24.2
39.5
46.5
61.2
71.3
84.7
131.4
24.6
39.8
47.0
61.9
71.9
85.3
132.9
25.1
40.1
47.5
62.8
72.9
86.0
134.9
25.8
38.8
48.2
64.0
74.1
87.0
137.3
26.1
38.5
48.3
64.1
74.5
87.6
138.1
26.7
37.8
49.0
65.0
75.7
88.6
140.2
36.9
49.2
65.7
77.7
90.2
143.6
kW/
kW
5.1
6.4
6.1
6.0
5.8
5.6
5.5
4.8
5.9
5.52
5.46
5.37
5.11
5.12
4.45
5.41
4.99
4.96
4.97
4.66
4.77
4.11
4.93
4.50
4.48
4.55
4.24
4.41
3.77
4.34
4.04
4.02
4.15
3.87
4.07
3.67
4.24
3.99
4.01
4.04
3.73
3.97
3.44
3.90
3.72
3.75
3.78
3.49
3.75
3.46
3.31
3.33
3.42
3.20
3.45
l/s
kPa
1.1
1.9
2.2
2.9
3.4
4.0
6.3
1.2
1.9
2.24
2.95
3.43
4.08
6.32
1.19
1.92
2.26
2.98
3.47
4.11
6.41
1.21
1.93
2.29
3.03
3.52
4.15
6.51
1.25
1.87
2.33
3.10
3.58
4.21
6.64
0.79
1.17
1.46
1.94
2.25
2.65
4.18
0.65
0.92
1.19
1.57
1.83
2.15
3.40
0.90
1.19
1.60
1.89
2.19
3.49
5.8
10.2
10.6
13.0
13.3
13.3
23.9
5.8
10.1
10.5
12.9
13.1
13.1
23.8
5.9
10.1
10.5
12.9
13.1
13.0
23.8
6.0
10.0
10.5
13.0
13.1
13.0
24.0
6.2
9.2
10.6
13.2
13.3
13.0
24.4
2.6
3.8
4.5
5.6
5.6
5.4
10.0
1.8
2.4
3.0
3.8
3.8
3.6
6.6
2.2
3.0
3.8
3.9
3.7
6.8
Application data

Gross performances, not in accordance with EN14511-3:2011. These performances do not take
into account the correction for the proportional heating capacity and power input generated by the
Order No.: 16110-20, 06.2013. Supersedes order No.: 16110-20, 04.2013.

Manufacturer reserves the right to change any product specifications without notice.
The cover photo is solely for illustration purposes and is not contractually binding.
Manufactured by: Carrier SCS, Montluel, France.

Printed in the European Union.

PSD 61af 022 105 - en

Uploaded by

Copyright:

Available Formats

PSD 61af 022 105 - en

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PSD 61af 022 105 - en

Uploaded by

Copyright:

Available Formats

High-Temperature Monobloc Air-to-Water Heat Pumps

with Integrated Hydronic Module

Heating system control (accessory)

The main features of this product range are:

Ozone-friendly R-407C refrigerant

Easy and fast installation

Integrated hydronic module (option)

Increased energy efficiency

Pro-Dialog+ combines intelligence with operating simplicity.

Pro-Dialog+ operator interface

Remote operating mode with volt-free contacts

A simple two-wire communication bus between the RS485

Remote interface (accessory)

This accessory includes a box that can be mounted inside

Flying Bird IV fan

Circuit B Total Capacity

Options and accessories

Low noise level

Water screw connection

Reduced compressor start-up current

Easy and fast installation

Two-directional communications board, complies with JBus protocol

Easy connection by communication bus to a building

Welded Victaulic connection

Permits customer connections to be welded to the unit

Acoustic compressor cover

Units with fans with available pressure for indoor installation

This option applies to 61AF units installed inside the

A square flange is supplied mounted on the unit. An

The installation of a duct system at the air evaporator

The unit is supplied with a grille on the discharge side.

Therefore more powerful fan motors than those used for

It is advisable to make the connection to the duct system

Applicable rules for units incorporated into an air

61AF units equipped with fans with available pressure are

Electrical data for 61AF units with option 11

Hydronic module (option 116)

The hydronic module option reduces the installation time.

The Pro-Dialog+ control allows integration of system and

The pump supplied with the hydronic module is a multispeed pump.

The hydronic module option is integrated into the heat

Physical and electrical data, units with hydronic module

Heating System Manager (HSM)

The control box can supply all auxiliary devices such as

Each of these accessory configurations is described in

Control box dimensions

Heating System Manager (HSM) - continued

Accessory 00PPG000488000- Heating System Manager type A

Accessory 00PPG000488100- Heating System Manager type B

Heating System Manager (HSM) - continued

Accessory 00PPG000488200- Heating System Manager type C

Water connections with/without hydronic module

1110 x 1327 x 1330

2273 x 2100 x 1330

* Eurovent-certified performances in accordance with standard EN14511-3:2011

Short-circuit stability current, main disconnect without fuse (TN system*)

Conditional short-circuit current (Icc)

* Earthing system type