EITGuideBook New Curriculum

Engineering Industrial TrainingUnit
(EITU)
International Islamic University Malaysia
GUIDE BOOK
KULLIYYAH OF ENGINEERING
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA
P.O.BOX 10
50728 KUALA LUMPUR
Engineering Industrial Training Guidelines

_____________________________________________________________________________________
1.0
INTRODUCTION
Engineering Industrial Training (EIT) programme is part of the degree requirements
at Kulliyyah of Engineering in order for the students to successfully complete their
Bachelor of Engineering. EIT is an important programme since it will provide the
students with academic and professional education in engineering courses. With
practical working experience the students will enhance their skill and capability.
In general, EIT programme is to expose the students to actual working environment
in any organisation or industry. This exposure will enhance and reinforce their
mental, intellectual, emotional, physical and social ability. Indirectly, the faculty
can establish a two-way communication and establish a good relationship and
smart partnership with industries.
2.0
OBJECTIVES
2.1
To expose the students to the actual working environment.
2.2
To enhance and supplement the knowledge and skills of the students.
2.3
To develop the students in terms of ability, competence and interpersonal

relationship.
2.4
To expose and familiarize the students to rules and regulations including safety
practices in industrial environment.
2.5
To develop the spirit of team work among the students and other working group
members.
2.6
To assess the ability and competence of the students in preparing themselves to join
the workforce upon the completion of their study.
3.0
REGISTRATION AT THE FIRM / COMPANY
3.1
Students are required to register at the firm/ company on the date agreed in the
Acceptance Form which is endorsed by the Kulliyyah / Faculty.
3.2
Students are required to bring the following documents during registration at the
firm / company:
a.
Reporting for duty letter from the Kulliyyah of Engineering
b.
Indemnity letter from the Kulliyyah of Engineering
c.
Insurance letter the Kulliyyah of Engineering
d.
EIT Log Book
e.
Passport size photograph
4.0
STUDENTS INFORMATION DURING TRAINING
______________________________________________________________________________________
2
Kulliyyah of Engineering, IIUM

_____________________________________________________________________________________
Once the student has registered to commence the training, they are required to inform the
Kulliyyah / Faculty on their personal details by using the provided card in the EIT Log
Book.
4.1
Students Information Card

Students are requested to fill in the card and request the signature and stamp of
the officer in charge at the firm/ company once they have settled with the
registration and accommodation. This card must be mailed to the Kulliyyah/
Faculty not later than TWO (2) weeks from the starting of EIT period.
4.2
EIT Visit
During the training period, a lecturer from the Kulliyyah/ Faculty will visit the
students at the training companies. The students are required to give a
presentation on their assigned project/ job scope during the EIT Visit. The
presentation will be assessed by the visiting lecturer.
5.0
DURING TRAINING
Students are required to observe the followings note during the period of training:
5.1
Discipline
Students are requested at all times during training to demonstrate the best conduct
and behaviour which symbolise the good character of IIUM students. Students
must try their best to adapt with other fellow workers in term of cooperation and
understanding. At all times during training, students are required to comply with
rules and regulations of the firm / company.
ANY STUDENT FOUND TO BE IN BREACH OF FIRMS / COMPANYS
RULES AND REGULATIONS, NO DISCIPLINE OR ILL MANNERED
WILL BE TERMINATED FROM THE TRAINING.
5.2
Accident / Insurance Claim

All students must exercise good safety attitude during the training. Every student
is covered by a personal insurance under the university (IIUM). If accident
occurred during the training, students or their representatives are required to
immediately inform the EIT Unit and Welfare Unit of Student Affairs Division
(STADD) in order to process the insurance claim. A police report must be made
within 24 hour of the accident occurred in order to make the insurance claim.
5.3
Leave Application
______________________________________________________________________________________
3

_____________________________________________________________________________________
Any application for leave must be made directly to the firm / company concern.
Students are also requested to fill in the leave form which is enclosed in the EIT
Log Book. If the leave exceeds 3 days, you would have to get permission from
EIT Unit. A copy of completed form must be sent to the EIT Unit as soon as
possible.
5.4
Change of Address
Students are requested to inform the Kulliyyah / Faculty for any change of
address immediately. This is important in order for the Kulliyyah / Faculty to
contact the students directly during the training.
5.5
Change of Place of Training

Students are NOT ALLOWED to change the place of training once they have
registered to the firm / company. If there is any difficulties or problems, students
are required to discuss the matter with the officer in charge in the firm / company
concerned.
However an exception is allowed in the case where the company is unable to
provide training related to the students academic background or other reasonable
excuses.
5.6
Daily Report
All students are expected to provide a brief daily report during the training in the
EIT log book. This report book must be shown to the visiting Lecturer / Professor
during their visit to the firm / company. This report can be used as a guideline to
prepare the full report upon completion of the training.
INDUSTRIAL TRAINING DAILY ACTIVITY REPORT BOOK MUST BE
BROUGHT TO THE WORK PLACE EVERYDAY.
5.7
Activities During EIT

During the training the students should be exposed to engineering practises and
activities. With regards to this matter it is preferable that the firm/company can
provide them with any of these activities:a. Students to be given projects that require certain level of engineering skills
b. Students to be involved in working exposure in order to enhance engineering
skills
c. Involvement of students in firms/companies projects
d. Student to be assigned to an engineer
e. Student to be exposed to the overall activities of the firm/company
f. Student to improve the production line or standard operation procedure of a
firm/company
______________________________________________________________________________________
4

_____________________________________________________________________________________
5.8
Firm / Company Confidentiality

At all timed during the training with the firm / company, students must not
divulge or disclose to any person of bodies corporate, any company policy or
secrets entrusted to the students or any knowledge known to the students without
the specific permission of the firm / company General Manager.
6.0
ENGINERING INDUSTRIAL TRAINING REPORT
All students are requested to write a full report with regard to the industrial training upon
completion of the training. The report must include all the works or activities which have
been carried out during the training.
The report must be type written and in TWO (2) copies, one for the Department (not
returnable) and one for student copy. The report must be submitted to the EIT Unit
within the date specified in EIT Student Flowchart 5. Before writing the report, students
are advised to discuss the content with the firm/ company concerned.
6.1
Report Format
The report must be well organised and hard cover bound before submission. The
contents of the report must include the following:
a.
1)
Front and Back Cover

Front cover
- Hard Cover, black colored with golden colored writings
- Topic of the training, firm / company name, student name and matric
number, duration of training.

b.
1)
Preliminary pages (Roman numbering: i, ii, iii, )

Company verification statement and company stamp (on report contents)
Standard Verification Statement:
I hereby declared that (<name of students> and <matric no>),student of department
<dept>, International Islamic University Malaysia (IIUM) has successfully completed
his/her Engineering Industrial Training from 14th April 2008 till 30th June 2008 at
<name of company>. This report is prepared by the above mentioned student as a partial
fulfillment of this training. All information given in this report is true and does not contain
any confidential information or classified data that might in a way or another abuse the
companys policies.
2)
3)
4)
5)
6)
Acknowledgement
Summary (+/- 200 words synopsis stating the problem and giving a summary of
main conclusions and recommendation)
Table of Contents
List of Tables
List of Figures
______________________________________________________________________________________
5

_____________________________________________________________________________________
c.
Body of the report (Standard numbering: 1,2,3, )

1) Introduction (training time table, background information about the company,
your role, purpose of the training).
2) Main projects and activities
3) Lesson and experience learned
4) Discussion and recommendation
5) Conclusion
6) References
7) Appendices
7.0
ENGINEERING INDUSTRIAL TRAINING EVALUATION
Evaluation of the EIT will depend upon four items.

a.
EIT Progress Report

During the training, the students have to submit a progress report to the
Kulliyyah.
b.
EIT Presentation
During EIT Visit, the students have to give an oral presentation on company
perspective and projects/ tasks conducted during EIT to the visiting lecturer.
c.
EIT Supervisor Evaluation Form

The students performance during the training will be assessed by their supervisor
or officer in charge.
d.
EIT Final Report

The students have to write and submit a full report upon the completion of the
training as explained in para 6.0.
______________________________________________________________________________________
6

_____________________________________________________________________________________
8.0
GENERAL AND SPECIALISATION COURSES FOR ENGINEERING

PROGRAMME AT IIUM
In order for the students to undergo Industrial Training Programme, they must have
completed at least 90 credits hour.
General First Year Courses
Engineering Calculus I
Engineering Calculus II
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology
Object Oriented Programming for Engineers
Computing Systems & Programming
Computer Aided Drafting

English for Academic Purposes
English for Occupational Purposes
Advanced Bahasa Melayu
Bahasa Melayu Engineering
Bahasa Melayu For Occupational Purposes
Bahasa Melayu 1 for Foreign Students
Introductory Economics for Engineering
Engineering Management
Decision Science
A) COMPUTER AND INFORMATION ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV
Microprocessors and Interfacing

Signals and Systems
Data Structure and Algorithm design
Multimedia Technology
Electrical and Computer Engineering Lab I
Electrical and Computer Engineering Lab II
Bahasa Melayu for Occupational Purposes/
Digital Logic Design

Circuit Analysis
Electronic Circuits
Islamic, Knowledge and Civilization
Differential Equations and Linear Algebra
SEMESTER V
SEMESTER VI
Communication Engineering
Software Engineering
Computer Architecture and Design
Control Systems
Electrical and Computer Engineering lab III
Seminar II
Introduction to Management (for non-ENM)
Digital Signal Processing

Electronic Instrumentation and Measurement
Computer and Information Engineering Lab I
Computer and Information Engineering Lab II
Seminar I
Ethics and Fiqh for Everyday Life
Decision Science
Discrete Mathematics
______________________________________________________________________________________
7

_____________________________________________________________________________________
SEMESTER VII
SEMESTER VIII
Project II
Department elective
Department elective
Computer Communications and Networks
Computer and Information Engineering Lab IV
Engineering Profesional Ethics
Project I
Data Communications
VLSI Design
Operating Systems
Department Elective
Computer and Information Engineering Lab II
LIST OF ELECTIVE COURSES

Fault Tolerant Computing
Computer Graphics
Compiler Construction
Parallel and Distributed Computing
Computing Systems Design
Performance Analysis
Computer Security
Machine Learning
Object-Oriented Software Engineering
Multimedia Database
Database System
VLSI Modeling Techniques
Selected Topics in Computer Technology
______________________________________________________________________________________
8

_____________________________________________________________________________________
8.0 GENERAL AND SPECIALISATION COURSES FOR ENGINEERING

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
B) COMMUNICATIONS ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV
Digital Logic Design

Circuit Analysis
Electronic Circuits
Islam,Knowledge and Civilization
Microprocessors and Interfacing

Electromagnetics Theory
Signals and Systems
Computational Methods and Statistics
Electrical and Computer Engineering Lab I
Electrical and Computer Engineering Lab II
SEMESTER V
SEMESTER VI
Digital Siganl Processing

Communicatons Engineering I
Electronic Instrumentations and Measurements
Decision Science
Complex Analysis and Partial Differential
Equations
Communication Engineering Lab I
Seminar I
Communicatons Engineering II
Transmission Media
Control System
Data Communications & Networking
Introduction to Management
Electrical and Computer Engineering Lab III
Communication Engineering Lab II
Seminar II
______________________________________________________________________________________
9

_____________________________________________________________________________________
SEMESTER VII
SEMESTER VIII
Mobile Communications
Departmental elective
Engineering Professional Ethics
C Communication Engineering Lab IV
Project II
Microwave Communications Systems

RF Devices and Circuits
Wireless Technology
Selected Topics in Communications Engineering
Optical Communications
Telecommunications Systems
Antennas and Wave Propagation
Communication Engineering Lab II
Project I
Speech and Image Processing

Broadband Networks
Communications Protocols
Information Theory and Coding
Satellite Communications Systems
______________________________________________________________________________________
10

_____________________________________________________________________________________

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
C) MANUFACTURING ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV
Manufacturing Process I
Thermofluid Engineering
Metalic Materials
Islam, Knowledge and Civilization
Manufacturing Engineering Lab I
Manufacturing Process II
Mechanics of Materials
Processing of Non Metalic Materials
Probability and Statistics
Bahasa Melayu For Occupational Purposes/
Manufacturing Engineering Lab II
SEMESTER V
SEMESTER VI
Quality Control
Computer Aided Design and Manufacturing
(CAD/CAM)
Metrology and Measurement Systems
Product Tooling
Manufacturing Automation
Seminar II
Manufacturing Engineering Lab IV
Manufacturing Engineering Lab V
Design of Machine Components

Seminar I
Instrumentation and Control
Decision Science
Complex Analysis and Partial
Equations
Manufacturing Engineering Lab III
Differential
______________________________________________________________________________________
11

_____________________________________________________________________________________
SEMESTER VII
SEMESTER VIII
Machine Tools Technology

Project I
Department elective
Department elective
Production Planning and Control

Computer Integrated Manufacturing (CIM)
Product Design and Development
Project II
Department elective
Manufacturing Engineering Lab VI

Finite Element Analysis foe Manufacturing
Analysis
Ergonomics and Workstation Design
Metal Cutting
Micromanufacturing Technology
Metal Forming
Processing of Plastics
Precision Machining
Joining and Casting
Manufacturing Strategy
Quantitative Techniques
Special Topics in Advanced Manufacturing
Engineering
Composite Materials
______________________________________________________________________________________
12

_____________________________________________________________________________________

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
D) AEROSPACE ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV
Engineering Materials
Thermal Sciences
Fluid Mechanics
Introduction to Flight
Aerospace Engineering Lab I
SEMESTER V
Decision Science
Aerodynamics
Seminar I
Aircraft Structures
Control Systems
Equations
Space Mechanics
Aerospace Engineering Lab II
Manufacturing Processes
Principle of Flight
Rigid Body Dynamics
Mechanical Lab I
SEMESTER VI
Aerodynamics II
Seminar II
Aircraft Structures II
Flight Dynamics and Control
Gas Dynamics
Flight Mechanics
Aerospace Engineering Lab III
Experimental Aerodynamics
______________________________________________________________________________________
13

_____________________________________________________________________________________
SEMESTER VII
Project I
Departmental Elective
Aircraft Design
Aerospace Propulsion
Instrumentation and Avionics
SEMESTER VIII
Project II
Aircraft Design Laboratory
Spacecraft Dynamics and Control
Aerospace Engineering Lab IV
Composite Structures
Nondestructive Evaluation of Structures
Machine Design
Launch Vehicle Technology
Fatigue and Fracture Mechanics
Hypersonics Aerodynamics
Elastics Stability of Structures
Finite Element Analysis

Rotorcraft Aerodynamics
Hydraulics and Pneumatics
Special Topics in Aerospace Engineering I
Computational Fluid Dynamics
Special Topics in Aerospace Engineering II
Spacecraft Systems Engineering
______________________________________________________________________________________
14

_____________________________________________________________________________________

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
E) AUTOMOTIVE ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV
Thermodynamics
Fluid Mechanics
Automotive Engineering Lab I
SEMESTER V
SEMESTER VI
Decision Science
Machine Design
Seminar I
Kinematics and Dynamics of Machinery
Heat Transfer
Equations
Structural Mechanics
Introduction to Automotive Engineering
Structural Dynamics
Computational Methods and Statistic
Mechanical Engineering Lab I
Power Train Systems

Seminar II
Control Systems
Internal Combustion Engines
Vehicle Electrical and Instruments Systems
Quality Control
Automotive Engineering Lab II
______________________________________________________________________________________
15

_____________________________________________________________________________________
SEMESTER VII
SEMESTER VIII
Project II
Department elective
Department elective
Vehicle Structural Analysis
Automotive Engineering Lab IV
Automotive Crashworthiness
Tribology
Special Topic in Automotive Engineering I
Vehicle Dynamics
Vehicle Aerodynamics
Special Topic in Automotive Engineering II
Acoustics and Noise Control
Quality Control
Project I
Department elective
Computer Aided Design (CAD/CAM)
Engine Design
Automotive Chassis Systems
Automotive Engineering Lab III
Automotive Heating and Air Conditioning

Active Vibration Control
Fatigue and Fracture Mechanics
Nondestructive Evaluation of Structures
Ergonomics
Combustion
Computational Fluid Dynamics
Automotive Styling Methodologies
Composite Structures
______________________________________________________________________________________
16

_____________________________________________________________________________________

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
F) MATERIALS ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV
Physical
Metallurgy
and
Mechanical
Behavior of Alloys
Production of Ferrous and Non Ferrous metal
Polymeric Materials
Materials Engineering Lab II
Materials Physics
Thermodynamics of Materials
Materials Engineering Lab I
SEMESTER V
SEMESTER VI
Materials Characterization
Foundry Joining
Materials Engineering Lab III
Seminar I
Complex Analysis of Partial
Equations
Decision Science
Differential
Ceramic Characterization
Corrosion and Protection
Heat Treatment
Polymer Processing
Mechanical Forming and
Materials
Seminar II
Materials Engineering Lab IV
Machining
of
______________________________________________________________________________________
17

_____________________________________________________________________________________
SEMESTER VII
SEMESTER VIII
Semiconductor Materials and Processing

Materials Selection and Design
Composite Materials
Materials Engineering Lab VI
Project II
Smart Materials
Special Topics in Materials Engineering
Electron Microscopy
Failure Analysis of Materials
NDT and Evaluation
Surface Engineering and Tribology
Powder Metallurgy
Bio Materials
Materials Engineering Lab V
Project I
Polymer Physics
Rheology of Polymeric Materials
Sol-Gel Technology an Synthesis of Materials
Electroceramics
Fine Ceramics
Nanomaterials
______________________________________________________________________________________
18

_____________________________________________________________________________________

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
G) MECHATRONICS ENGINEERING PROGRAMME

SEMESTER III
SEMESTER IV

Signal and System Analysis
Thermofluid Engineering
Mechatronics Workshop
SEMESTER V
Complex Analysis and Partial Differentation
Equations
System Dynamics
Digital System Design
Mechatronics Engineering Lab II
Seminar I
Decision Science

Theory of Machines and Mechanisms
Electromechanical Systems
Instrumentation and Measurements
Mechatronics Engineering Lab I
SEMESTER VI
Analog Electronics
Microprocessor Based System
Control Systems
Design of Machine Elements
Mechatronics Engineering Lab III
Mechatronics Engineering Lab IV
Seminar II
______________________________________________________________________________________
19

_____________________________________________________________________________________
SEMESTER VII
SEMESTER VIII
Project I
Digital Control Systems Design
Mechatronics Systems Design
Department elective
Project II
Robotics
Industrial Automation
Department elective
Department elective
Mechatronics Engineering Lab V
Mechanical Vibrations
Modern Control Systems
Intelligent Systems
Power Electronics and Drives
Microcontroller - Based Design
Machine Vision
Microelectromechanical System
Computer Integrated Manufacturing

Surface Engineering and Tribology
Computer Aided Design and Manufacturing
(CAD/CAM)
Communication Engineering
Data Communication
______________________________________________________________________________________
20

_____________________________________________________________________________________

PROGRAMME AT IIUM
Engineering Lab I
Engineering Lab II
Electric Circuits
Electronics
Engineering Drawing
Statics
Dynamics
Workshop Technology

Decision Science
H) BIOTECHNOLOGY ENGINEERING PROGRAMME

SEMESTER III

Introductory Microbiology
Fluid Mechanics
Biotechnology Engineering Lab I
Organic
Chemistry
for
Biological
Engineering
Islam, Knowledge and Civilization
SEMESTER V
Bioinstrumentation and Safety

Genetic Engineering
Biotechnology Engineering Lab III
Environmental Engineering
Transport Phenomena
Bahasa Malaysia 2 for Foreign Students
Seminar I
SEMESTER IV
Biochemistry I
Thermodynamics
Biotechnology Engineering Lab II
Biochemical Kinetics
Cell and Molecular Biology
SEMESTER VI
Bioseparation Processes
Biochemical Processes
Biochemistry II
Equations
Cell and Tissue Engineering
Introdustion to Management
Seminar II
______________________________________________________________________________________
21

_____________________________________________________________________________________
SEMESTER VII
Bioprocess Control
Biological Reactor Design and Analysis
Biotechnology Engineering Lab IV
Project I
Decision Science
SEMESTER VIII
Project II
Bioprocess Facility Design and Regulatory
Waste Management Engineering
Department elective
Department elective
Department elective
Biomass Energy
Solid Waste Engineering
Food Process Engineering
Bio-Pharmaceutical Manufacturing
Engineering Aspect of Animal Cell Culture

Computer Simulation in Biological Systems
Design and Optimization of Processed
Biotechnology
Special Topics in Biotechnology Engineering
______________________________________________________________________________________
22

_____________________________________________________________________________________
ACKNOWLEDGEMENTS
The Kulliyyah of Engineering, International Islamic University Malaysia (IIUM) wishes

to thank all the companies, firms and individuals for their invaluable contribution towards
the success of the Engineering Industrial Training Programme.
FURTHER INFORMATION
For further information with regards to Industrial Training Programme please contact:
The Dean
Kulliyyah of Engineering
OR
Head
Engineering Industrial Training Unit (EITU)
Kulliyyah of Engineering
International Islamic University Malaysia (IIUM)
P.O. Box 10
50728 Kuala Lumpur
MALAYSIA
Tel : 03 6196 4406/4490
Fax : 03 61964466
______________________________________________________________________________________
23

_____________________________________________________________________________________
Email: [email protected]
______________________________________________________________________________________
24

EITGuideBook New Curriculum

Uploaded by

Copyright:

Available Formats

EITGuideBook New Curriculum

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

EITGuideBook New Curriculum

Uploaded by

Copyright:

Available Formats

Engineering Industrial TrainingUnit

Engineering Industrial Training Guidelines

To expose the students to the actual working environment.

To enhance and supplement the knowledge and skills of the students.

To develop the students in terms of ability, competence and interpersonal

REGISTRATION AT THE FIRM / COMPANY

STUDENTS INFORMATION DURING TRAINING

Engineering Industrial Training Guidelines

Students Information Card

Accident / Insurance Claim

Engineering Industrial Training Guidelines

Change of Place of Training

Activities During EIT

Engineering Industrial Training Guidelines

Firm / Company Confidentiality

ENGINERING INDUSTRIAL TRAINING REPORT

Front and Back Cover

number, duration of training.

Preliminary pages (Roman numbering: i, ii, iii, )

Engineering Industrial Training Guidelines

Body of the report (Standard numbering: 1,2,3, )

ENGINEERING INDUSTRIAL TRAINING EVALUATION

Evaluation of the EIT will depend upon four items.

EIT Progress Report

EIT Supervisor Evaluation Form

EIT Final Report

Engineering Industrial Training Guidelines

GENERAL AND SPECIALISATION COURSES FOR ENGINEERING

Computer Aided Drafting

A) COMPUTER AND INFORMATION ENGINEERING PROGRAMME

Microprocessors and Interfacing

Digital Logic Design

Digital Signal Processing

Engineering Industrial Training Guidelines

LIST OF ELECTIVE COURSES

Engineering Industrial Training Guidelines

8.0 GENERAL AND SPECIALISATION COURSES FOR ENGINEERING

Computer Aided Drafting

B) COMMUNICATIONS ENGINEERING PROGRAMME

Digital Logic Design

Microprocessors and Interfacing

Digital Siganl Processing

Engineering Industrial Training Guidelines

Microwave Communications Systems

LIST OF ELECTIVE COURSES

Speech and Image Processing

Engineering Industrial Training Guidelines

8.0 GENERAL AND SPECIALISATION COURSES FOR ENGINEERING

Computer Aided Drafting

C) MANUFACTURING ENGINEERING PROGRAMME

Design of Machine Components

Engineering Industrial Training Guidelines

Machine Tools Technology

Production Planning and Control

LIST OF ELECTIVE COURSES

Engineering Industrial Training Guidelines

8.0 GENERAL AND SPECIALISATION COURSES FOR ENGINEERING

Computer Aided Drafting

D) AEROSPACE ENGINEERING PROGRAMME