Architect Help Manual HMDA (DPMS)

SoftTech Engr. Pvt. Ltd.
Page 1 of 23

Proposal Submission Help Manual

HYDERABAD METROPOLITAN DEVELOPMENT AUTHORITY

SoftTech Engr. Pvt. Ltd. Page 2 of 23

Table of Content
1. Introduction 3
2. Screens Help 3
2.1. Link from HMDA Website .......................................................................... 3
2.2. Architect Registration- .............................................................................. 3
2.3. Login Screen for Architect/ Engineer ........................................................ 5
2.4. Proposals ................................................................................................ 6
2.4.1. New Proposal ..................................................................................... 6
2.4.1.1. Proposal Information ....................................................................... 6
2.4.2. Applicant Information ......................................................................... 7
2.4.3. Application Checklist- ......................................................................... 8
3. Ready to Submit 9
3.1. Attached Drawing .................................................................................... 9
3.2. Document Check list .............................................................................. 11
3.3. Plot detail ............................................................................................. 12
3.4. Area detail ............................................................................................ 13
3.5. Building Detail ....................................................................................... 14
3.6. Proposal flow ......................................................................................... 15
3.7. Payment detail ...................................................................................... 16
4. Send to Inward Clerk 17
5. Resubmission of proposals 18
6. Approved Proposals 20
7. Submitted Proposals 21


1. Introduction
AutoDCR is the atomization of the approval process, followed for approval of architectural plans. It is an
application customized for efficient management and approval of the drawings. It helps in attaining
standardization and hence transparency in the total process of building permission. The complete building
approval management system will be a web based system where Architects submit the plans and proposal
basic data on line. In built Customized workflow available for approval based on power delegation. The
proposal will be finally approved or rejected after different levels of scrutiny.
2. Screens Help
2.1. Link from HMDA Website

Architects/ LE can access the HMDA online submission directly also from the URL.
The link will be found on the Hydrabad Metropolitan Development Authorities website,
(http://www.hmda.gov.in),

2.2. Architect Registration-
Every Architect who intends to submit the proposals online at HMDA can do so by one time registering
himself/ herself at the HMDA by clicking on the Building permission link Page will navigate towards the
Login Page.


Architect has to submit his personal information such as name, firm name, registration no. validity, contact
information etc.

On successful registration Architect can login to the Development Permission Management System (DPMS)
system using his/ her login credentials.


2.3. Login Screen for Architect/ Engineer
As soon as Architect provides the username and password, Architect will enter in his console. This complete
dashboard will show the Rejected, Pending and Approved proposals submitted. Link is provided on the file
number for details. On right side the list will display the list of demand notes. The left panel has the option
of creating new proposals.


2.4. Proposals
The architect needs to submit the proposal information from their office and submit the hard copy file to the
HMDA for physical submission.
2.4.1. New Proposal
After clicking on the Create a file, following application form appears.
The form is divided in to two sections for easy navigation.
Proposal information
Applicant information
2.4.1.1. Proposal Information
The Architect needs to fill the following details.
Proposal information
o Location Type
o Case Type
o Application Type
o Project Type
o Zone, District, Mandal, Village
Site Address
o Building no, Plot No, Door No/Flat No, Survey No, Pin Code, Road/Street etc.
Proposal Type
o Type of proposal such as individual building/Group Development/ Multistoried buildings
o Height of Individual building in meters.


The Architect needs to fill the following details.
Proposal information.
Applicant Information
Developer information.
Proposed Project.
Attach the pre DCR formatted drawing file by clicking attach button.
Click save button to save the proposal.
Proposal is created with a temporary number.
Below screen shows the actual form.
2.4.2. Applicant Information
Architects Information
o Consultant type, Name of Architect, Email, mobile number
Applicants Information
o General details of applicant such as Name, Mobile, permanent address, email, pin, plot no
etc.
Developers information.
o Type of developer- Land owner/ developer, Validity
Structural Engineers Information-
o Consultant type, Name, Email & mobile
Proposed Project.
Attach the pre DCR formatted drawing file by clicking attach button.
Click save button to save the proposal.


2.4.3. Application Checklist-
Applicant has to fill the checklist listed in the application checklist tab.

This section includes some questions which are mandatory and based on the outcome some conditional
documents become mandatory for e.g. - Whether NOC from Fire department is required?
If Architect selects the option Yes then in the Conditional document list the document Fire clearance of
the proposal for building exceeding 15 Mt. In height for commercial use and 18 Mt., height for Residential
Use and above and for all public assembly buildings becomes automatically mandatory and supporting
document will be required for file submission.
After all details are filled by architect and clicking on save button the proposal with temporary file number
will be created with confirmation.


3. Ready to Submit
Once the proposal is successfully created it will move in to the Ready to Submit section. Architect needs to
provide project information regarding Area, Building, Plot details before the proposal can be sent to HMDA
Inward Clerk. After clicking on the file number, following screen appear.

3.1. Attached Drawing
Attach preformatted (Pre DCR formatted) Auto CAD drawing file (.dwg file) by clicking Attach Now button
and selecting the drawing file (.dwg file) from the desired location as follows.
Step-1) Click on select drawing, following page will be appear.


2) Select drawing file.

4) Selected drawing file gets attached with the proposal


3.2. Document Check list
Documents are divided into 4 categories-
1. Technical Aspects (Mandatory)
These are technical documents that are mandatory to submit along with the proposal. Applicant has
to submit the documents mentioned in this category as these are mandatory documents such as
Site plan drawn to a metric scale 1:1500 showing setbacks, tot-lot and outer measurements of
blocks as per Building Rules, 2012
2. Technical Aspects ( conditionally Mandatory)-
These are technical documents that are conditionally mandatory that means those documents that
are mandatory according to the special cases such as- Layout copy in case the site is part of
approved Layout/LRS Proceedings.
3. Ownership Aspects (mandatory)
These are Ownership documents that are mandatory to submit along with the proposal. Applicant
has to submit the documents mentioned in this category as these are mandatory documents such
as- Copy of registered sale deed etc.
4. Ownership Aspects (Conditional Mandatory)
These are Ownership documents that are conditionally mandatory that means those documents
that are mandatory according to the special cases such as- NOC issued by the Collector for
alienation of land in respect of assignment to freedom fighters / Defense persons.
Steps to attach documents-
Step 1- Click on check box/s for which architect wants to attach the document.
Step 2- click on Submit button
Step 3- click on button appears for each document checkbox.

Step 4- attach document by selecting the document


3.3. Plot detail
Click on plot Details icon on the tool bar to enter/select general details of the plot
Plot details form is catagorised in three parts-
General Details
General details such as Plot Use, plot sub use, no. of stories, Land use zone, Aerodrometyp, Aero-
Distance are catagorised in this part
Site details
Site details such as nature of road, width of road approaching the site, approaching road whether
existing on site or not, ROW of abuctting road, status of road etc.
Plot Directions
Nature of properties and the details such as for road the widhth of road , for plot; plot no., for
survey; survey no., for CTS; CTS no.to the proposed plot in all directions.


3.4. Area detail


Area Details Page: Based on the number of plots, the number of rows appears. Save option for saving the
area details.

Based on the number of Plots, information with respect to plot(s) is to be entered.
Plot name
No. of extract
Clicking on area detail button will enable user to input the ownership areas pertaining to the documents like
Gift Deed, Lease deed, Sale Deed etc.

3.5. Building Detail
Building Details Page: Architect needs to provide the number of building for the project and their use/sub-
use. Click on Building Details icon on the tool bar to enter/select building details of the building(s)
being proposed.


After entering building detail, click on submitting building detail button. After saving system prompts
confirmation message building detail is saved.
3.6. Proposal flow
Architect can find the exact location of his proposal from this section. On clicking on show button flow
details will be displayed.


3.7. Payment detail
Architect can know all the demand notes generated by the system at different intervals during scrutiny.
Clicking on the button will give a consolidated list of demand notes created for the particular proposal.

Architect can know the amount payable against the demand note / challan. Printing is possible for the
demand generated.


After payment is made against the demand, online receipt is available for printing.

4. Send to Inward Clerk
Architect can now send the electronic file to the Inward clerk for processing on the proposal.


On acceptance of the hard copy and payment of Scrutiny challan/ Demand Note process of the file will
actually begin at HMDA. By clicking on the send button, system will redirect the proposal to the concerned
Inward clerk.
After clicking on send to inward clerk button following screen will be appear, Bilingual user remarks option is
provided for Architects/ Engineer.

5. Resubmission of proposals
If proposal gets rejected based on
1. Document scrutiny
2. Site visit scrutiny
3. Technical Scrutiny

Architect need to resubmit the proposal. For resubmitting file, architect will have to follow following
step like.
A consolidated list of Rejected proposal is available on the Proposal section.

Architect/ Engineer needs to enter the file number of the proposal to comply the objection. Below
screen shows the process of resubmission.


Based on the objection type compliance screen will be displayed. Compliance can be one of the following
1. Drawing Objection
2. Document objection
3. Site visit objection
4. All the above or any combination.


6. Approved Proposals
Architect can see the list of Approved proposals.

By clicking on the file number he/she can view the all details of the respective file.


Architect can see the detailed report by clicking on the Reports button

Report contains all the details of respective proposal.
7. Submitted Proposals
Architect can see the list of proposals submitted to the corporation


By clicking on respective file number architect can see the details of respective proposal.


This is the last page of the document.

Architect Help Manual HMDA (DPMS)

Uploaded by

Copyright:

Available Formats

Architect Help Manual HMDA (DPMS)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Architect Help Manual HMDA (DPMS)

Uploaded by

Copyright:

Available Formats

What is the purpose of the AutoDCR system?

What are the different stages involved in proposal submission?

SoftTech Engr. Pvt. Ltd.

You might also like