Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    Analytical Gear Inspection Symbols and Interpretation of Charts PDF

    Uploaded by

    niloblue
    This document defines common terminology used to describe deviations and errors in gear geometry specifications. It provides definitions for terms relating to pitch deviations, profile deviations, helix deviations, and other parameters. Pitch deviations measure differences in tooth spacing, including total cumulative pitch deviation and maximum single pitch deviation. Profile deviations quantify deviations from the nominal involute profile, such as total profile deviation, profile form deviation, and profile slope deviation. Helix deviations specify tolerances for the gear's helical structure, like total helix deviation, helix form deviation, and mean helix slope deviation. Other parameters define variations in tooth thickness and pitch. Diagrams are included to illustrate some of the defined geometry terms.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Analytical Gear Inspection Symbols and Interpretation of Charts PDF

    Uploaded by

    niloblue
    4K views10 pages
    This document defines common terminology used to describe deviations and errors in gear geometry specifications. It provides definitions for terms relating to pitch deviations, profile deviations, helix deviations, and other parameters. Pitch deviations measure differences in tooth spacing, including total cumulative pitch deviation and maximum single pitch deviation. Profile deviations quantify deviations from the nominal involute profile, such as total profile deviation, profile form deviation, and profile slope deviation. Helix deviations specify tolerances for the gear's helical structure, like total helix deviation, helix form deviation, and mean helix slope deviation. Other parameters define variations in tooth thickness and pitch. Diagrams are included to illustrate some of the defined geometry terms.

    Original Description:

    this doc will introduce the factors in the gear inspection

    Original Title

    Analytical gear inspection symbols and interpretation of charts.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document defines common terminology used to describe deviations and errors in gear geometry specifications. It provides definitions for terms relating to pitch deviations, profile deviations, helix deviations, and other parameters. Pitch deviations measure differences in tooth spacing, including total cumulative pitch deviation and maximum single pitch deviation. Profile deviations quantify deviations from the nominal involute profile, such as total profile deviation, profile form deviation, and profile slope deviation. Helix deviations specify tolerances for the gear's helical structure, like total helix deviation, helix form deviation, and mean helix slope deviation. Other parameters define variations in tooth thickness and pitch. Diagrams are included to illustrate some of the defined geometry terms.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4K views10 pages

    Analytical Gear Inspection Symbols and Interpretation of Charts PDF

    Uploaded by

    niloblue
    This document defines common terminology used to describe deviations and errors in gear geometry specifications. It provides definitions for terms relating to pitch deviations, profile deviations, helix deviations, and other parameters. Pitch deviations measure differences in tooth spacing, including total cumulative pitch deviation and maximum single pitch deviation. Profile deviations quantify deviations from the nominal involute profile, such as total profile deviation, profile form deviation, and profile slope deviation. Helix deviations specify tolerances for the gear's helical structure, like total helix deviation, helix form deviation, and mean helix slope deviation. Other parameters define variations in tooth thickness and pitch. Diagrams are included to illustrate some of the defined geometry terms.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    References: AGMA915-1-A02

    Symbol AGMA nomenclature Other names Definition


    Pitch deviations
    F
    p
    Total cumulative pitch
    deviation
    Total index variation
    Total index tolerance
    Index deviations
    Difference between the most
    positive and the most negative
    index value for all teeth

    p
    ,
    pt
    Single pitch deviation
    Tooth to tooth spacing
    Tooth to tooth index error
    Pitch variation
    Adjacent pitch error
    Difference between two adjacent
    teeth index values (+, -)

    p max.
    Max. single pitch deviation
    Max. difference between two
    adjacent teeth index values (+, -)

    u
    Difference between
    adjacent pitches
    Difference between actual
    dimensions of two successive right
    or left flank transverse pitches

    u max.
    Max. difference between
    adjacent pitches
    Max. difference between actual
    dimensions of two successive right
    or left flank transverse pitches
    Profile deviations (involute)
    L
    u
    , L
    uc
    Profile evaluation range Profile test range
    F
    u
    Total profile deviation Profile total error
    Distance between two nominal
    profiles enclosed within the profile
    test range

    u
    Profile form deviation Profile form error
    Distance between two involutes of
    the actual base circle, that enclose
    the actual involute profile within
    the profile inspection range
    References: AGMA915-1-A02

    Hu
    Profile slope deviation Profile angular error
    Distance between two nominal
    profiles that intersect the average
    profile at start and end points of the
    profile range

    Hum
    Mean profile slope
    deviation
    Arithmetic mean of the profile
    slope deviations of three or more
    equally spaced tooth flanks around
    the gears circumference.
    Helix deviation (lead)
    L

    Helix evaluation range Evaluation range


    b Face width (less chamfers)
    F

    Total helix deviation Lead total error


    Distance between the two nominal
    leads enclosed within the lead
    inspection range

    Helix form deviation Lead form error


    Distance between two helical lines
    that enclose the actual lead within
    the lead inspection range

    H
    Helix slope deviation
    Tooth alignment tolerance
    Lead parallelism
    Lead angle error
    Distance (in transverse plane)
    between two nominal leads that
    intersect the average lead (helix) at
    start and end points of the lead
    inspection range

    Hm
    Mean helix slope deviation
    Arithmetic mean of the helix slope
    deviations of three or more equally
    spaced tooth flanks around the
    gears circumference.
    References: AGMA915-1-A02
    Other parameters
    R
    x
    Variation of tooth
    thickness
    Difference between the largest and
    the smallest tooth thickness of a
    gear
    R
    p
    Range of pitch error
    Pitch variation
    Difference between the largest and
    the smallest actual size of the
    transverse pitches of a given flank
    F
    r
    Pitch line run-out
    Radial position difference of a
    probe contacting all teeth at
    measuring diameter (pitch
    diameter). It combines tooth
    eccentricity in relation to the datum
    axis and the tooth spacing error.
    References: AGMA915-1-A02
    Helix deviation (lead):
    Total helix deviation

    b
    References: AGMA915-1-A02
    Helix form deviation
    Mean helix line

    b
    Parallels enclosing the
    actual helix profile
    References: AGMA915-1-A02
    Helix slope deviation

    H
    b
    Mean helix line
    References: AGMA915-1-A02
    Pitch deviations:
    Total profile deviation
    u
    u
    References: AGMA915-1-A02
    Profile form deviation
    Parallels enclosing
    the actual involute
    profile
    Mean prifle line
    u
    u
    References: AGMA915-1-A02
    Profile slope deviation
    Mean prifle line
    Hu
    u
    fp=Fp - Fp
    11 12 1
    32
    flank number
    Fp
    Fp
    12
    11
    12 11
    26 27
    Fp
    Fp
    27
    26
    fp=Fp - Fp
    27 26
    Left hand tooth flank
    Left hand tooth flank
    Right hand tooth flank
    Right hand tooth flank
    (Pitch line runout)
    fp max.
    fu
    fu max.
    Rp

    You might also like