OMRON Home Sensor

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Photomicrosensor (Transmissive)

EE-SX1096
Dimensions
Note: All units are in millimeters unless otherwise indicated.

Features
General-purpose model with a 3.4-mm-wide slot. Mounts to PCBs or connects to connectors. High resolution with a 0.5-mm-wide aperture. With a horizontal sensing slot. OMRONs XK8-series Connectors can be connected without soldering. Contact your OMRON representative for information on obtaining XK8-series Connectors. RoHS Compliant.

250.2 Two, R1 190.15 50.2 60.2 Two, 3.20.2 dia. holes Four, C0.3 Two, C2

2.10.15 0.50.1 (Optical axis) 100.2 7.20.2 2.50.1 Four, 0.5 Four, 0.25

2.10.15 0.50.1

Absolute Maximum Ratings (Ta = 25C)


Item Emitter Forward current Reverse voltage Detector CollectorEmitter voltage EmitterCollector voltage Collector current Symbol IF VR VCEO VECO IC Topr Tstg Tsol Rated value 50 mA (see note 1) 1 A (see note 2) 4V 30 V --20 mA 100 mW (see note 1) 25C to 85C 30C to 100C 260C (see note 3)

30.4

Pulse forward current IFP

Cross section AA Cross section BB

Internal Circuit
K C

Collector dissipation PC
Unless otherwise specified, the tolerances are as shown below. Dimensions 3 mm max. 3 < mm 6 6 < mm 10 10 < mm 18 18 < mm 30 Tolerance

Ambient temperature

Operating Storage

Soldering temperature

0.3 0.375 0.45 0.55 0.65

Terminal No. Name A Anode K Cathode C Collector E Emitter

Note: 1. Refer to the temperature rating chart if the ambient temperature exceeds 25C. 2. The pulse width is 10 s maximum with a frequency of 100 Hz. 3. Complete soldering within 10 seconds.

Ordering Information
Description Photomicrosensor (transmissive) Model EE-SX1096

Electrical and Optical Characteristics (Ta = 25C)


Item Emitter Forward voltage Reverse current Peak emission wavelength Detector Light current Dark current Leakage current CollectorEmitter saturated voltage Peak spectral sensitivity wavelength Rising time Falling time VF IR P IL ID ILEAK VCE (sat) P tr tf Symbol Value 1.2 V typ., 1.5 V max. 0.01 A typ., 10 A max. 940 nm typ. 0.5 mA min., 14 mA max. 2 nA typ., 200 nA max. --0.1 V typ., 0.4 V max. 850 nm typ. 4 s typ. 4 s typ. IF = 30 mA VR = 4 V IF = 20 mA IF = 20 mA, VCE = 10 V VCE = 10 V, 0 lx --IF = 20 mA, IL = 0.1 mA VCE = 10 V VCC = 5 V, RL = 100 , IL = 5 mA VCC = 5 V, RL = 100 , IL = 5 mA Condition

Photomicrosensor (Transmissive)

EE-SX1096

123

Engineering Data
Forward Current vs. Collector Dissipation Temperature Rating
Collector dissipation PC (mW)
IF PC

Forward Current vs. Forward Voltage Characteristics (Typical)


Forward current IF (mA)

Light Current vs. Forward Current Characteristics (Typical)


Ta = 25C VCE = 10 V

Forward current IF (mA)

Ta = 30C Ta = 25C Ta = 70C

Light current IL (mA)

Ambient temperature Ta (C)

Forward voltage VF (V)

Forward current IF (mA)

Light Current vs. CollectorEmitter Voltage Characteristics (Typical)


Ta = 25C

Relative Light Current vs. Ambient Temperature Characteristics (Typical)


Relative light current IL (%)
IF = 20 mA VCE = 5 V

Dark Current vs. Ambient Temperature Characteristics (Typical)


VCE = 10 V 0 lx

Light current IL (mA)

IF = 50 mA IF = 40 mA IF = 30 mA IF = 20 mA IF = 10 mA

CollectorEmitter voltage VCE (V)

Ambient temperature Ta (C)

Dark current ID (nA)

Ambient temperature Ta (C)

Response Time vs. Load Resistance Characteristics (Typical)


VCC = 5 V Ta = 25C

Sensing Position Characteristics (Typical)


120

Sensing Position Characteristics (Typical)


120

Relative light current IL (%)

Relative light current IL (%)

Response time tr, tf (s)

100

IF = 20 mA VCE = 10 V Ta = 25C
(Center of optical axis)

100

IF = 20 mA VCE = 10 V Ta = 25C (Center of optical axis)


d

80

80

d
60

60

40

40

20

20

0.5

0.25

0.25

0.5

0.75

1.0

0 2.0

1.5

1.0

0.5

0.5

1.0

1.5

2.0

Load resistance RL (k)

Distance d (mm)

Distance d (mm)

Response Time Measurement Circuit


Input Output 90 % 10 %

Input

Output

124

Photomicrosensor (Transmissive)

EE-SX1096

MEMO

Photomicrosensor (Transmissive)

EE-SX1096

All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ELECTRONIC COMPONENTS LLC


55 E. Commerce Drive, Suite B Schaumburg, IL 60173

OMRON ON-LINE
Global - http://www.omron.com USA - http://www.components.omron.com

847-882-2288
Cat. No. X305-E-1 10/10 Specifications subject to change without notice Printed in USA

Photomicrosensor (Transmissive)

EE-SX1096

You might also like