DGSL en

Mini slides DGSL
Mini slides DGSL

Key features
General
Double-acting drives
Wide range of mounting options
System product for handling and

assembly technology
Highly flexible thanks to a wide

range of assembly and connection
options on:
Drive body, slide, yoke plate
The technology in detail

1
2
4
5
6
7
1 Cushioning
2 Cover
Choice of five cushioning types:
Elastic cushioning without metal
end position (P)
Elastic cushioning without metal
end position, short design (E)
Elastic cushioning with metal
end position (P1)
Shock absorber (Y3)
Shock absorber with reducing
sleeve (Y11)
Alternative:
Without cushioning (N)
3 Coarse stroke adjustment
10
The cover stops foreign parts or dirt

getting into the guide
The cover comes in different lengths
and can be trimmed as required by
the customer
4 Clamping unit
The end stop for the advanced end

position can be adjusted
mechanically, for example to
shorten the stroke
4 End-position locking
40
5 Innovative guide unit

Wide roller track, which provides
extremely high rigidity
High load capacity
High precision
Housing and steel slide form a
guide: there are no accumulative
tolerances
7 Supply ports
Proximity sensors can be

integrated, so there are no
projecting parts
Two slots for mounting
Clearly visible from the side and
from above
40
Mechanical clamping, for fixing the
slide in any position; frictional
locking (C)
Mechanical locking when the end

position is reached, for fixing the
slide in the unpressurised,
retracted state; positive locking (E3)
6 Position sensing
45
Internet: www.festo.com/catalogue/...
Choice of two sides:

On the front
On the side
Subject to change 2015/06
Mini slides DGSL

System example
The technology in detail
Intermediate position module
46
The intermediate position module

enables an additional adjustable
position within the stroke range.
1 Shock absorber retainer
2 Intermediate position module
The symmetric design enables the

intermediate position to be
approached during the advance or
return stroke, depending on the
installation position
Intermediate position can be
travelled through from the end
position
Travel can be continued directly
from the intermediate position
Easy to assemble
Sensing of the stop lever position
possible
System product for handling and assembly technology
1
5
4
3
2
System components and accessories

1
2
3
Drives
Grippers
Adapters
4
5
Basic components
Installation components
Axes
Motors
2015/06 Subject to change
Description
Page/Internet
Wide range of combinations possible within handling and assembly technology

Wide range of variations possible within handling and assembly technology
For drive/drive connections
For drive/gripper connections
Profiles and profile connections as well as profile/drive connections
For a clear, safe layout of electrical cables and tubing
Wide range of combinations possible within handling and assembly technology
Servo and stepper motors, with or without gear unit
drive
gripper
52
gripper
basic component
installation component
axis
motor
Mini slides DGSL

Peripherals overview
-H-
2
8/9/aJ/aB/aC
Note
Operation without cushioning

components is not permitted.
4
4
5
aC
aB
aA aJ
6
9
7
8
Accessories
1
2
3
4
5
6
7
8
9
aJ
aA
aB
aC
Cover
DADS
Shock absorber retainer
DADP
Intermediate position module
DADM
Centring sleeve
ZBH
Proximity sensor
SME/SMT-10
Push-in fitting
QSM
One-way flow control valve
GRLA
Cushioning
E
Cushioning
P
Cushioning with stop
P1
Reducing sleeve
DAYH
Shock absorber
DYSW
Cushioning with shock absorber
Y3
Description
Page/Internet
For protection, to stop foreign parts or dirt getting into the guide
The cover can be trimmed as required by the customer
Attachment for the shock absorber
For positioning and cushioning the intermediate position
With stop lever for the intermediate position
45
48
46
For centring loads and attachments

50
(centring sleeves are included in the scope of delivery of the mini slide)
For position sensing. Can be integrated in the sensor slot, so there are no projecting parts 50
For connecting compressed air tubing with standard O.D.
50
For regulating speed
50
Flexible stop for medium loads at medium speed

(short design)
Flexible stop for medium loads at medium speed
(standard design)
Precision metal stop for small loads at low speed
49
49
49
For installing a smaller shock absorber. For applications where the cushioning energy lies 49
between the cushioning Y3 and P1
12 (shock absorber selection)
49
For large loads and high speed. Ensures precise, metal-to-metal contact after the
cushioning
49
Mini slides DGSL

Type codes
DGSL
10
100
E3
Y3
Type
Double-acting
DGSL
Mini slide
Size
Stroke [mm]
Clamping unit
C
Attached
End-position locking
E3
With piston rod in retracted position
Cushioning
P
P1
Y3
E
Y11
N
Elastic cushioning without metal end position,

at both ends
Elastic cushioning with metal end position, at
both ends
Progressive shock absorber, at both ends
Elastic cushioning without metal end position,
at both ends, short design
Progressive shock absorber with reducing
sleeve, at both ends
No cushioning
Position sensing
A
Via proximity sensor
Mini slides DGSL

Technical data
Function
-N-T-
Wearing parts kits

45
Size
4 25
Stroke length
10 200 mm
General technical data

Size
Pneumatic connection
Design
Guide
Type of mounting
Cushioning
Position sensing
Mounting position
Max. advancing speed
Max. retracting speed
Repetition accuracy
P
E
P1
Y3
Y11
N
[m/s]
[m/s]
[mm]
[mm]
P1/Y3
P
10
12
16
20
Operating and environmental conditions

Size
Operating medium
Note on operating/pilot medium
Min. operating pressure
Max. operating pressure1)
Ambient temperature2)
Compressed air to ISO 8573-1:2010 [7:4:4]

Lubricated operation possible (in which case lubricated operation will always be required)
2.5
1.5
1
8
0 +60
1)
2)
[bar]
[bar]
[C]
Piston
Theoretical force at 6 bar,
advancing
Theoretical force at 6 bar,
retracting
Impact energy in the end
positions
10
12
16
20
25
Note max. operating pressure in combination with the intermediate position module DADM-EP Internet: dadm
Note operating range of proximity sensors
Piston j, forces and impact energy

Size
1)
25
M3
M5
Gx
Scotch yoke system
Ball bearing cage guide
With through-hole
Via female thread
Elastic cushioning without metal end position, at both ends
Elastic cushioning without metal end position, at both ends, short design
Elastic cushioning with metal end position, at both ends, adjustable
Progressive shock absorber with reducing sleeve, at both ends

No cushioning
Any
0.5
0.8
0.5
0.8
0.01
0.3
P, E
P1
Y3
1)
10
12
16
20
25
[mm]
[N]
6
17
8
30
10
47
12
68
16
121
20
188
25
295
32
483
[N]
13
23
40
51
104
158
247
415
[Nm]
[Nm]
[Nm]
[Nm]
0.015
0.005
0.05
0.02
0.08
0.03
0.8
0.12
0.04
1.3
0.8
0.25
0.06
2.5
1.3
0.35
0.12
4
2.5
0.45
0.2
8
4
0.55
0.25
12
8
With reducing sleeve and next smallest shock absorber
Mini slides DGSL

Technical data
Weight [g]
Size
10
12
16
20
25
Product weight without cushioning component

10
20
30
40
50
80
100
150
200
Stroke
82
93
104
158
179
197
215
232
235
263
289
313
370
454
396
434
470
507
548
727
813
604
660
711
762
813
1,112
1,229
1,499
896
954
1,008
1,072
1,143
1,365
1,712
2,034
1,535
1,649
1,746
1,857
1,991
2,295
2,921
3,620
4,248
2,520
2,670
2,824
2,983
3,137
4,019
4,519
5,344
6,139
Moving load without cushioning component

10
20
30
40
50
80
100
150
200
31
34
38
68
76
83
90
99
101
111
121
130
152
185
163
180
194
208
226
299
334
256
279
299
320
340
456
507
614
403
432
459
486
519
618
776
910
660
710
750
801
858
998
1,254
1,566
1,807
998
1,052
1,115
1,181
1,244
1,567
1,761
2,102
2,432
2
1
1.6
3.6
2
3
6
3
5
6
14
9
12
11
18
23
12
19.7
21
33
45.6
15
39.6
42
52
82.4
31
77.3
67
91
106
40
104
91
131
Cushioning component
P
E
P1
Y3
1)
1)
Materials
Sectional view
1
Mini slide
1
2
3
4
End cap
Housing
Piston rod
Yoke plate
Guide
Seals
Note on materials
Anodised aluminum
Anodised aluminum
High-alloy steel
Anodised aluminum
Tempered steel
Thermoplastic rubber, hydrogenated nitrile rubber, nitrile rubber
Free of copper and PTFE
Mini slides DGSL

Technical data
Possible combinations without adapter plate
Pick & place
3
4
2
2
1
4
1
3 Centring sleeve ZBH
4 Connector sleeve ZBV
Piggy-back assembly
2
3
4
1
3 Centring sleeve ZBH

4 Connector sleeve ZBV
Mounting example with connector sleeve ZBV

DGSL
Screw
ZBV2)
DGSL
1 Basic drive
Size
4
2 Assembly 4
drive
6
8
10
12
16
20
25
1)
2)
2x M3x7
2x ZBH-51)
10
2x M3x10
2x ZBH-51)
2x M3x10
2x ZBH-51)
ZBV-M4-72)
ZBV-M4-72)
ZBV-M4-72)
ZBV-M4-72)
2x M4x12
2x ZBH-71)
12
2x M4x12
2x ZBH-71)
2x M4x14
2x ZBH-71)
16
20
25
ZBV-M5-72)
ZBV-M5-72)
ZBV-M5-72)
ZBV-M5-72)
2x M5x14
2x ZBH-71)
2x M5x16
2x ZBH-71)
2x M5x18
2x ZBH-71)
ZBV-M6-92)
ZBV-M6-92)
ZBV-M6-92)
ZBV-M6-92)
2x M6x20
2x ZBH-91)
2x M6x20
2x ZBH-91)
2x M6x30
2x ZBH-91)
Centring sleeves ZBH are included in the scope of delivery of the mini slide DGSL
Connector sleeves ZBV 50
Mini slides DGSL

Technical data
Parallelism [mm]
The term parallelism refers to the
accuracy of alignment between the
mounting surface and the slide
surface.
Size
10
12
16
20
25
0.02
0.02
0.025
0.02
0.02
0.025
0.025
0.03
0.02
0.02
0.025
0.025
0.03
0.035
0.02
0.02
0.025
0.025
0.03
0.035
0.045
0.02
0.025
0.025
0.03
0.035
0.04
0.05
0.075
0.02
0.025
0.025
0.03
0.035
0.04
0.05
0.075
0.02
0.025
0.03
0.035
0.04
0.045
0.055
0.08
0.08
0.02
0.025
0.03
0.035
0.04
0.045
0.055
0.08
0.08
Stroke [mm]
Parallelism X
10
20
30
40
50
80
100
150
200
Linearity [mm]
The term linearity refers to the
accuracy of alignment between the
mounting surface and the slide
surface as a function of the stroke.
Linear travel accuracy y as a function of stroke length l
Mini slides DGSL

Technical data
Adjustable end-position range
Coarse adjustment of the advanced end position
The mini slide DGSL allows the
advanced fixed stop to be adjusted by
removing the cover.
This permits stroke reduction down to
the next but one smaller standard

stroke through a combination of
coarse and precision adjustments.
Advantages:
Can be flexibly adapted to the
application
Integrated, which means reduced
conversion effort and costs
Large setting range
-H-
Note
Removal of the fixed stops can

severely damage the mini slide DGSL.
Covers
Fixed stop
Size
Stroke [mm]
L6
4
L7
L6
6
L7
L6
L7
L6
L7
L6
L7
L6
L7
L6
L7
L6
L7
10
20
30
40
50
80
100
150
200
10
10
14
14
14
14
14
10
16
16
16
16
16
24
24
24
29
29
29
29
35
35
35
44
44
44
44
55
55
55
55
Example:
DGSL-12-150-
Max. stroke = 150 mm
10
By adjusting the fixed stop by the

dimension L6:
Stroke = 150 29 = 121 mm
12
16
By adjusting the fixed stop by the

dimension L6 and L7:
Stroke = 150 29 29 = 92 mm
20
25
The stroke can also be reduced

through a precision adjustment:
Stroke = 150 29 29 29
= 63 mm
Precision adjustment of the

advanced and retracted end position
11
10
Mini slides DGSL

Technical data
Precision adjustment of the advanced and retracted end position
Precision adjustment of the required
stroke reduction is possible using the
cushioning components (on the slide
and in the end cap).
Advantages:
Precision adjustment is accurately
fixed by the clamping component
No readjustment required, position
is fully retained under lock and
load
Step 1:
Loosen the clamping component.
Step 2:
Position the slide by hand in the
required end position.
Step 1
Step 2 4
Quick and easy adjustment, only

one tool required
Step 3:
Turn the stop element using an Allen
key until the end position is reached.
Step 4:
Tighten the clamping component.
Clamping component
Adjustable end-position range [mm] per end position/stroke reduction

Size
4
6
Advanced end position
With cushioning
Retracted end position

With cushioning
1)
10
12
16
20
25
P
E
P1
Y3
1)
14.5
4.5
14.5
16.5
5
16.5
19.5
4.5
19.5
15
27.5
13
27.5
24
24
29
9
29
29
29
37.5
3.5
37.5
36.5
36.5
50.5
6.5
50.5
44
44
55
11.5
55
56
56
P
E
P1
Y3
1)
13.5
3.5
13.5
15
3.5
15
18.5
3.5
18.5
14
20
5.5
20
15
15
25.5
5.5
25.5
25.5
25.5
39.5
5.5
39.5
38.5
38.5
49.5
5.5
49.5
42
42
49
5.5
49
51.5
51.5
-H-
Note
The distance L of the cushioning com

ponent ( operating instructions)
must not be fallen below (factory
setting).
DGSL--P/E
DGSL--P1
-H-
Note
The setting range of the advanced

and retracted end position is restric
ted when using the cushioning type
"E".
DGSL--Y3
DGSL- with
reducing sleeve
11
Mini slides DGSL

Technical data
Shock absorber selection
Payload load m as a function of impact velocity v
With the mini slide DGSL the shock
absorber can be replaced and the
cushioning behaviour can thus be in
fluenced (depending on the payload).
This is done by removing the existing

shock absorbers on the DGSL and
replacing them with a smaller shock
absorber as appropriate to the
application (description below).
Graphs
for selecting a suitable shock ab
sorber as a function of the mounting
position of the mini slide from 13.
Ordering data
Shock absorbers DYSW, DYEF and
reducing sleeve DAYH 49.
Fundamentally, the following applies:

shock absorbers must be loaded.
Since the shock absorber DYSW-4-6 is
more fully utilised in this case, both
the service life of the shock absorber

and the cushioning characteristics are
improved.
With smaller loads:

The next smallest shock absorber
DYSW can be installed with the help of
the reducing sleeve DAYH.
With very small loads:

The shock absorber DYEF can be
installed.
Selection example:
Current drive:
Mini slide: DGSL-10--Y3-A
Given:
Payload: 500 g
Impact velocity: 0.4 m/s
Mounting position: Horizontal
DYSW-5-8 (cushioning Y3)

DYSW-4-6 with DAYH-4 (cushioning Y11)
DYEF-M8-Y1F
Result:
The first cushioning curve, which is
located above the point of intersec
tion, is the most suitable in this case.
Due to the low payload of less than
one kilogram, the cushioning
characteristics are greatly improved by
12
replacing the shock absorber

DYSW-5-8 integrated in the mini slide
with the reducing sleeve DAYH-4 and
the next smallest shock absorber
DYSW-4-6.
Mini slides DGSL

Technical data
Payload m as a function of impact velocity v horizontal mounting position
DGSL-4
DGSL-6
DYEF-M4-Y1F (cushioning P1)

DYEF-M4-Y1 (cushioning P)
DGSL-8

DGSL-10

DGSL-12

DGSL-16

DGSL-20

DGSL-25


13
Mini slides DGSL

Technical data
Payload m as a function of impact velocity v vertical mounting position, payload moving upwards
DGSL-4
DGSL-6

DGSL-8

DGSL-10

DGSL-12

DGSL-16

DGSL-20
DGSL-25

14


Mini slides DGSL

Technical data
Payload m as a function of impact velocity v vertical mounting position, payload moving downwards
DGSL-4
DGSL-6

DGSL-8

DGSL-10

DGSL-12

DGSL-16

DGSL-20

DGSL-25


15
Mini slides DGSL

Technical data
Travel time t as a function of payload m and cushioning P/E horizontal mounting position
The values in the graphs are
determined by calculation.
The travel time as a function of pay
load must not be reduced below the
values shown, because the kinetic

impact or residual energy in the end
positions can result in damage to the
drive.
Advancing
Stroke 10 mm, size 4 10
Retracting
DGSL-4
DGSL-6
DGSL-8
DGSL-10
16
Vertical mounting position

19
DGSL-12
DGSL-16
DGSL-20
DGSL-25
Mini slides DGSL

Technical data
Advancing

drive.

19
Retracting
Stroke 50 mm, size 16

DGSL-6
DGSL-8
DGSL-10
DGSL-12
DGSL-16
DGSL-20
DGSL-25
17
Mini slides DGSL

Technical data

drive.
Advancing
Retracting
DGSL-10
DGSL-12
DGSL-16
18

19
DGSL-20
DGSL-25
Mini slides DGSL

Technical data
Advancing

drive.

19
Retracting
DGSL-20
DGSL-25
The travel times for a vertical
mounting position are calculated by
multiplying the data for a horizontal
mounting position by a correction
factor ka (advancing) and kr
(retracting), see adjacent table.
Given:
Stroke = 200 mm
Size = 20
Payload = 3 kg
Ascertained travel time th (horizontal),
see graph:
Advancing = 500 ms
Retracting = 600 ms
Calculated travel time tv (vertical):
Advancing: tv = th x ka
tv = 500 ms x 0.9 = 450 ms
Retracting: tv = th x kr
tv = 600 ms x 1.1 = 660 ms
Stroke
[mm]
Size
Advancing (ka) 1)
Retracting (kr)
10
4, 6, 8, 10
12, 16, 20, 25
4, 6, 8, 10
12, 16, 20, 25
6, 8, 10, 12
16, 20, 25
10, 12, 16, 20, 25
12, 16, 20, 25
20, 25
0.95
0.95
0.95
0.95
0.9
1.1
1
1
0.9
1.1
1.2
1.1
1.2
1.1
1.2
1.1
1.1
1.1
30
50
100
150
200
1)
Downward
19
Mini slides DGSL

Technical data
Travel time t as a function of payload m and cushioning P1 horizontal mounting position

drive.
Advancing
Retracting
DGSL-4
DGSL-6
DGSL-8
DGSL-10
20

23
DGSL-12
DGSL-16
DGSL-20
DGSL-25
Mini slides DGSL

Technical data

drive.
Advancing
Retracting
DGSL-6
DGSL-8
DGSL-10
DGSL-12

23
DGSL-16
DGSL-20
DGSL-25
21
Mini slides DGSL

Technical data
Advancing

drive.

23
Retracting
DGSL-10
DGSL-12
DGSL-16
22
DGSL-20
DGSL-25
Mini slides DGSL

Technical data

drive.
Advancing
Retracting

23
DGSL-20
DGSL-25
Given:
Stroke = 200 mm
Size = 20
Payload = 2 kg
see graph:
Advancing = 640 ms
Retracting = 780 ms
tv = 640 ms x 0.9 = 576 ms
tv = 780 ms x 1.1 = 858 ms
Stroke
[mm]
Size
Advancing (ka) 1)
Retracting (kr)
10
4, 6, 8, 10
12, 16, 20, 25
4, 6, 8, 10
12, 16, 20, 25
6, 8, 10, 12
16, 20, 25
10, 12, 16, 20, 25
12, 16, 20, 25
20, 25
1
1.1
1
1.1
1
0.9
0.95
0.95
0.9
1.1
1.2
1.1
1.2
1.1
1.1
1.1
1.1
1.1
30
50
100
150
200
1)
Downward
23
Mini slides DGSL

Technical data
Travel time t as a function of payload m and cushioning Y3 horizontal mounting position

drive.
Advancing
Retracting
DGSL-8
DGSL-10
DGSL-12
24

25
DGSL-16
DGSL-20
DGSL-25
Mini slides DGSL

Technical data
Travel time t as a function of payload m and cushioning Y3 horizontal mounting position

drive.
Advancing
Retracting
DGSL-10
DGSL-12
DGSL-16

25
DGSL-20
DGSL-25

Given:
Stroke = 200 mm
Size = 20
Payload = 10 kg
see graph:
Advancing = 405 ms
Retracting = 490 ms
tv = 405 ms x 0.9 = 365 ms
tv = 490 ms x 1.5 = 735 ms
Stroke
[mm]
Size
Advancing (ka) 1)
Retracting (kr)
30
8, 10, 12
16, 20, 25
8, 10, 12
16, 20, 25
10, 12, 16, 20, 25
12, 16, 20, 25
20, 25
0.95
0.9
0.9
0.9
0.8
0.9
0.9
1.2
1.5
1.5
1.5
1.5
1.5
1.5
50
100
150
200
1)
Downward
25
Mini slides DGSL

Technical data
Dynamic characteristic load values
Torques are indicated with reference
to the centre of the guide.
These values must not be exceeded
during dynamic operation. Special
attention must be paid to the
cushioning phase.
If the drive is simultaneously subjec

ted to several of the indicated forces
and torques, the following equation
must be satisfied in addition to the
indicated maximum loads:
|Fy|
|My|
|Fz|
|Mx|
|Mz|
)
)
)
)
v1
Fymax. Fzmax. Mx max. My max. Mz max.
Position of the guide centre
Calculation example
Given:
To be calculated:
Mini slide
Stroke length
Lever arm Lx
Lever arm Ly
Load Fz
Acceleration a
= DGSL-10
= 80 mm
= 50 mm
= 30 mm
= 0.8 kg
= 0 m/s2
Fy, Fz, Mx, My, Mz

and
verification of operation with
combined load
Solution:
L21 = 83 mm from table
Fy = 0 N
Fz
Combined load:
|My|
|Fy|
|Fz|
|Mx|
|Mz|
)
)
)
)
Fymax. Fzmax. Mx max. My max. Mz max.
=mxg
= 0.8 kg x 9.81 m/s2 = 7.848 N
+ 0 ) 7.848N ) 0.236Nm ) 0.886Nm ) 0 + 0.094 v 1

1200N
18Nm
12Nm
Mx = m x g x Ly
= 0.8 kg x 9.81 m/s2 x 30 mm = 0.236 Nm
My = m x g x [(L21+stroke)-Lx]
= 0.8 kg x 9.81 m/s2 x [(83 mm + 80 mm) 50 mm] = 0.886 Nm
Mz = 0 Nm
Permissible forces and torques
Size
Stroke
[mm]
Geometric characteristics
H13
L21
[mm]
[mm]
Fymax
[N]
Fzmax
[N]
Mxmax
[Nm]
Mymax, Mzmax
[Nm]
10
20
30
343
368
387
343
368
387
2
2
2
2
2
2
2.7
31
36
42
10
20
30
40
50
540
590
631
677
719
540
590
631
677
719
6
7
8
8
8
4.5
5
5.5
5.5
5.5
3.4
37
42
47
52
57
26
Mini slides DGSL

Technical data
Permissible forces and torques
Size
Stroke
[mm]
Geometric characteristics
H13
L21
[mm]
[mm]
Fymax
[N]
Fzmax
[N]
Mxmax
[Nm]
Mymax, Mzmax
[Nm]
10
20
30
40
50
80
657
745
850
934
962
971
657
745
850
934
962
971
7
8
9
10
10
10
5.5
5.5
5.5
5.5
8
8
3.25
41
46
51
56
67
82
10
20
30
40
50
80
100
927
1,003
1,078
1,152
1,175
1,200
1,250
927
1,003
1,078
1,152
1,175
1,200
1,250
15
15
15
15
18
18
18
6
7
8
9
9
12
12
4.2
43
46
51
56
61
83
96
10
20
30
40
50
80
100
150
942
1,006
1,075
1,142
1,200
1,280
1,340
1,400
942
1,006
1,075
1,142
1,200
1,280
1,340
1,400
15
15
15
18
18
20
20
20
8
9
10
11
12
15
15
15
5.2
44
49
54
59
64
88
98
124
10
20
30
40
50
80
100
150
1,769
2,021
2,274
2,527
2,780
2,800
2,850
2,900
1,769
2,021
2,274
2,527
2,780
2,800
2,850
2,900
35
35
35
40
40
50
50
50
20
22
22
25
25
27
43
43
6.4
54
59
64
69
74
89
113
138
10
20
30
40
50
80
100
150
200
2,911
3,143
3,354
3,612
3,816
4,032
4,200
4,400
4,600
2,911
3,143
3,354
3,612
3,816
4,032
4,200
4,400
4,600
60
60
60
60
70
80
85
90
90
30
30
30
40
50
50
80
80
80
7.55
56
61
66
71
76
91
121
152
177
10
20
30
40
50
80
100
150
200
3,270
3,744
4,205
4,643
4,650
4,700
4,750
4,800
4,800
3,270
3,744
4,205
4,643
4,650
4,700
4,750
4,800
4,800
100
100
100
110
120
130
130
130
130
60
60
60
60
60
80
80
80
80
8.55
64
69
74
79
84
112
129
154
179
10
12
16
20
25
27
Mini slides DGSL

Technical data
Download CAD data www.festo.com
Dimensions
Size 4 10
DGSL-4
DGSL-6
DGSL-8/10
1 Mounting thread (centring

sleeves included in the scope
of delivery)
2 Through-holes for mounting
the drive
3 Centring holes (centring
of delivery)
General dimensions
Size
B1
4 Supply port, advancing

5 Supply port, retracting
6 Slots for proximity sensor
SME/SMT-10
7 Centring hole
L10 Distance between outer edge of

yoke plate and housing
L15 Distance between centre of
centring hole and outer edge of
slide

housing
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
D1
5
5
10
10
3.55
5
6
6.8
6.3
8.2
10.3
12.35
11.95
13.55
16.25
20.1
27.5
34.5
41.5
49
2
3.5
4.57
5
17.2
19.9
24
29.2
12.4
20
24.1
28
23.15
28.1
33
37.7
16.15
18.9
24.4
27
M3
M3
M4
M4
4
6
8
10
28
35
42
50
27.4
34.5
41.3
49
18.35
26.3
31.45
39.2
9.4
13.5
16.6
19.65
Size
D2
D3
D4
D5
D6
D7
EE
H1
0.08
H2
H3
H4
H5
H6
H7
H8
4
6
8
10
6.3
6.3
8.2
8.2
5H7
5H7
7H7
7H7
3.3
3.3
4.3
4.3
6.2
6.2
8
8
M4x0.5
M5x0.5
M6x0.5
M8x1
3H7
3H7
5H7
5H7
M3
M3
M3
M5
16
20
24
29
15.4
19
22.7
27.1
15.1
19.25
23
28
3.85
4.7
6.46
6.8
6.25
7.8
10.63
13.8
8.55
10.2
14.06
15.8
8.1
16.05
18.9
22.8
8.4
10.55
13.3
15.5
Size
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
T3
+0.1
T4
T5
21)
4
6
8
10
0.65
0.45
0.64
0.6
0.3
0.5
0.9
1.4
5
5
10
10
8
11.5
8.7
12.5
2.7
3.38
3.28
4.2
5.35
6.5
7.8
8.76
5.85
7.2
10.5
11.76
3.1
3.7
4.1
4.8
10.6
13.1
16.8
19.25
0.25
0.3
0.36
0.41
5.28
6.68
6.7
9
1.3
1.3
1.6
1.6
2.25
3.7
3.8
5.35
4
6
7.5
7.5
1.3
1.5
2
2.5
2
2.5
2.5
3
1)
28
With size 4, the scope of delivery of the drive includes an Allen key
Mini slides DGSL

Technical data
Stroke-dependent dimensions
Size
Stroke
L1
4
10
10
20
30
10
20
30
40
50
10
20
30
40
50
80
10
20
30
40
50
80
100
72.1
81.2
91.2
81.1
91.1
101.1
111.1
121.1
90.2
100.2
110.2
120.2
142.2
172.2
103.1
112.8
122.8
132.8
142.8
186.2
206.2
Cushioning-dependent dimensions
Size
Cushioning
10
P
E
P1
P
E
P1
P
E
P1
Y3
P
E
P1
Y3
Y11
L2
L5
L6
L7
L8
L9
L10
L11
L15
0.05
L16
L17
L18
0.05
L21
48
57.1
67.1
54
64
74
84
94
59.6
69.6
79.6
89.6
111.6
141.6
66
75.7
85.7
95.7
105.7
149.1
169.1
28.85
37.95
47.95
33.1
43.1
53.1
63.1
73.1
34.6
44.6
54.6
64.6
74.6
104.6
41.3
51
61
71
81
111
131
10
11
14
6.5
5.5
6.6
2.5
13.25
4.95
9.6
2.5
5.1
13.25
4.95
3.5
10
16
10
11.6
2.5
14.65
6.1
5.5
16
11
10
11.6
2.5
6.4
18.5
7.5
24
24
24
31
36
42
37
42
47
52
57
41
46
51
56
67
82
43
46
51
56
61
83
96
L3
max.
L4
max.
15.2
5.7
14
17.6
6.6
15.5
21.1
6.6
19
24.3
22.8
8.8
20.5
25.5
30.4
7.8
0
6
8.1
0
5.8
10.7
0
9.1
23.9
12.5
0
10.2
14.9
19.9
For adjusting the cushioning

stroke
1.3
1.5
2.5
1
For adjusting the end position
1.3
1.3
2.5
1.5
1.5
3
2
2
4
2
2.5
2.5
5
2.5
2
29
Mini slides DGSL

Technical data
Hole pattern for mounting threads and centring holes
DGSL-4-10
DGSL-4-20
DGSL-4-30
DGSL-6-10
DGSL-6-20
DGSL-6-30
DGSL-6-40/50
DGSL-8-10
DGSL-8-20
DGSL-8-30
30
Mini slides DGSL

Technical data
DGSL-8-40
DGSL-8-50/80
DGSL-10-10
DGSL-10-20
DGSL-10-30
DGSL-10-40 100
Distances from yoke plate to mounting threads and centring holes

DGSL-4 10
1 Centring holes with thread

2 Through-holes for mounting the
drive
Size
L21)
L31)
L41)
L9
L15
0.05
L18
4
6
8
10
10
10
10
10
20
20
20
20
40
40
40
40
5.5
8
10
10
4
5.1
7
6.4
3
3.5
5.5
5
1)
Tolerance for centring hole 0.02

Tolerance for through-hole 0.1
31
Mini slides DGSL

Technical data
Dimensions
Size 12/16

of delivery)
the drive
of delivery)

SME/SMT-10
7 Centring hole

slide

housing
General dimensions
Size
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
D1
12
16
60
66
59
65
47.6
53.5
24
26.7
10
10
9.2
11.1
14.7
16.7
24.3
27.5
59
65
6.45
7.75
35.25
37.9
35.2
38
50
50.4
36.7
36.7
M5
M5
Size
D2
D3
D4
D5
D6
D7
EE
H1
0.08
H2
H3
H4
H5
H6
H7
H8
12
16
9
9
7H7
7H7
5.5
5.5
9
9
M10x1
M12x1
8H7
8H7
M5
M5
36
40
34.8
38
34.7
39
8
8.5
15.1
16.7
20.35
20.6
28.2
31.7
19.3
20.8
Size
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
T3
+0.1
T4
T5
12
16
0.8
0.5
0.95
1.5
10
10
17.9
20
5.2
6.4
10.75
10.5
15.75
16.7
5.5
7
24.9
26.6
0.5
0.5
10.1
12.5
1.6
1.6
5.6
6.1
7.5
9
3
4
3
4
32
Mini slides DGSL

Technical data
Size
Stroke
L1
12
16
10
20
30
40
50
80
100
150
10
20
30
40
50
80
100
150
106.2
116.2
126.2
136.2
146.2
197.6
217.6
267.6
124.1
134.6
144.6
154.6
164.6
194.6
243.6
293.6
Size
Cushioning
12
16
P
E
P1
Y3
Y11
P
E
P1
Y3
Y11
L2
L5
L6
L7
L8
L9
L10
L11
L15
0.05
L16
L17
L18
0.05
L21
68.6
78.6
88.6
98.6
108.6
160
180
230
82.5
93
103
113
123
153
202
252
42.4
52.4
62.4
72.4
82.4
112.4
132.4
182.4
45
54.6
64.6
74.6
84.6
114.6
134.6
184.6
12
10
11.6
2.5
5.8
18.5
4.5
29
14
12
13.6
2.5
6.8
21
10
5.5
44
49
54
59
64
88
98
124
54
59
64
69
74
89
113
138
29
35
L3
max.
L4
max.
28.1
8.8
26
36.9
42.2
42.3
8.8
40
51.9
55.4
14.9
0
12.8
23.7
18.7
26.1
0
23.8
35.7
38.9

stroke
1
3
3
6
3
2.5
4
4
8
4
3
33
Mini slides DGSL

Technical data
DGSL-12-10
DGSL-12-20
DGSL-12-30
DGSL-12-40
DGSL-12-50 100
DGSL-12-150
DGSL-16-10
DGSL-16-20
34
Mini slides DGSL

Technical data
DGSL-16-30
DGSL-16-40 100
DGSL-16-150

DGSL-12/16

drive
Size
L21)
L31)
L41)
L5
0.03
L9
L15
0.05
L18
0.05
12
16
10
10
20
20
50
50
100
100
10
12
5.8
6.8
4.5
5.5
1)

35
Mini slides DGSL

Technical data
Dimensions
Size 20/25
DGSL-20
DGSL-25

of delivery)
the drive
of delivery)

SME/SMT-10
7 Centring hole

slide

housing
General dimensions
Size
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
D1
20
25
85
104
84
103
68.85
82.6
34.5
41.6
20
20
14.15
16.2
21.4
26.4
36.35
43.05
83.4
103
10
13.25
48.9
56.5
49.2
56.7
64.1
79.35
48.6
53.65
M6
M6
Size
D2
D3
D4
D5
D6
D7
EE
H1
0.08
H2
H3
H4
H5
H6
H7
H8
20
25
11.2
11.2
9H7
9H7
6.6
6.6
11
11
M14x1
M16x1
8H7
8H7
Gx
Gx
49
60
46.5
57.5
47.7
58.5
10.3
10.45
20.6
23.35
23.2
31.15
38.2
47.95
26.1
34.5
Size
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
T3
+0.1
T4
T5
20
25
0.5
1
2
2
20
20
19.6
27.5
7.55
8.55
14.7
16.55
14.7
21.15
10
11
33.3
42.7
0.8
0.45
14.6
15.6
2.1
2.1
8.6
15
10
12
4
5
5
6
36
Mini slides DGSL

Technical data
Size
Stroke
L1
20
25
10
20
30
40
50
80
100
150
200
10
20
30
40
50
80
100
150
200
141.2
151.2
161.2
171.2
183.2
211.2
270.2
333.2
383.2
157.1
167.1
177.1
187.1
197.1
253.1
286.1
338.1
388.1
Size
Cushioning
20
25
P
E
P1
Y3
Y11
P
E
P1
Y3
Y11
L2
L5
L6
L7
L8
L9
L10
L11
L15
0.05
L16
L17
L18
0.05
L21
84.6
94.6
104.6
114.6
126.6
154.6
213.6
276.6
326.6
96
106
116
126
136
192
225
277
327
59.1
69.1
79.1
89.1
99.1
129.1
149.1
199.1
249.1
63.7
72.2
82.2
92.2
102.2
132.2
152.2
202.2
254.2
17
14
15.6
4.6
7.8
30.5
12
6.5
44
22
15
16.6
4.6
32.3
14.5
6.5
56
61
66
71
76
91
121
152
177
64
69
74
79
84
112
129
154
179
44
55
L3
max.
L4
max.
52.4
8.8
50.1
55.5
67.4
51.9
8.8
49.6
65.2
78.4
31.2
0
28.9
34.3
45.9
30.5
0
28.2
43.8
56.9

stroke
1
4
4
8
4
4
5
5
10
5
4
37
Mini slides DGSL

Technical data
DGSL-20-10/20
DGSL-20-30/40
DGSL-20-50
DGSL-20-80
DGSL-20-100 200
DGSL-25-10
38
DGSL-25-20
Mini slides DGSL

Technical data
DGSL-25-30/40
DGSL-25-50
DGSL-25-80
DGSL-25-100 200

DGSL-20/25

drive
Size
L21)
L31)
L4
L9
L15
0.05
L18
0.05
L22
20
25
20
20
40
40
1001)
1000.03
14
15
7.8
8
6.5
6.5
100 0.03
100 1)
1)

39
Mini slides DGSL-C/-E3

Technical data
Function
C Clamping unit
-N-
Size
6 25
Wearing parts kits
45
E3 End-position locking
-H-
Note
Additional measures are required for

use in safety-related applications; in
Europe, for example, the standards
listed under the EC Machinery
Directive must be observed. Without
General technical data Clamping unit
Size
Function
Clamping type with operating direction

Mounting position
Static holding force
Product weight
[N]
[g]
10
12
Mechanical clamping
For fixing the slide in any position
Frictional locking
At both ends
Clamping via spring force, released via compressed air
M5
Any
80
80
180
180
10
10
15
15
additional measures in accordance

with statutory minimum require
ments, the product is not suitable for
use in safety-related sections of
control systems.
16
20
25
350
50
350
50
600
50
Operating and environmental conditions Clamping unit

Operating medium
Min. release pressure
Max. operating pressure
[bar]
[bar]
General technical data End-position locking

Size
Function
Clamping type with operating direction

Mounting position
Static holding force
Product weight
[N]
[g]

3
10
10
12
Mechanical locking when the end position is reached

For fixing the slide in the unpressurised, retracted state
Positive locking
At both ends
Clamping via spring force, unlocked via compressed air
M5
Any
60
60
160
160
13
13
26
26
16
20
25
250
64
380
64
640
65
Operating and environmental conditions End-position locking

Operating medium
Operating pressure
40
[bar]

38
Mini slides DGSL-C/-E3

Technical data
When using end-position locking
(E3), the adjustable range of the
retracted end position is reduced by
the following values.
1 Adjustable end-position range
Size
6, 8
Max. 1.5 mm
10, 12
Max. 2.3 mm
16, 20, 25
Max. 2.7 mm
Dimensions
C Clamping unit/E3 End-position locking
4 Supply port
Size
B15
D7
E3
6
8
10
12
16
20
25
7.2
9.9
11.2
14.8
14
17
22.55
12
12
16
16
20
20
20
10.7
10.5
11.8
10.5
27.5
21.3
17.75
21.2
21
21.2
19.9
30.5
24.3
20.65
EE
M5
H20
L12
7.3
7.3
10.5
10.3
13
14
14
41
Mini slides DGSL

Technical data
Ordering data
Size
Stroke
[mm]
With cushioning P
10
4
20
30
10
6
20
30
40
50
10
8
20
30
40
50
80
10
10
20
30
40
50
80
100
10
12
20
30
40
50
80
100
150
10
16
20
30
40
50
80
100
150
10
20
20
30
40
50
80
100
150
200
10
25
20
30
40
50
80
100
150
200
42
Part No.
Type
Size
543910
543911
543912
543916
543917
543918
543919
543920
543926
543927
543928
543929
543930
543931
543942
543943
543944
543945
543946
543947
543948
543961
543962
543963
543964
543965
543966
543967
543968
543983
543984
543985
543986
543987
543988
543989
543990
544005
544006
544007
544008
544009
544010
544011
544012
544013
544030
544031
544032
544033
544034
544035
544036
544037
544038
DGSL-4-10-PA
DGSL-4-20-PA
DGSL-4-30-PA
DGSL-6-10-PA
DGSL-6-20-PA
DGSL-6-30-PA
DGSL-6-40-PA
DGSL-6-50-PA
DGSL-8-10-PA
DGSL-8-20-PA
DGSL-8-30-PA
DGSL-8-40-PA
DGSL-8-50-PA
DGSL-8-80-PA
DGSL-10-10-PA
DGSL-10-20-PA
DGSL-10-30-PA
DGSL-10-40-PA
DGSL-10-50-PA
DGSL-10-80-PA
DGSL-10-100-PA
DGSL-12-10-PA
DGSL-12-20-PA
DGSL-12-30-PA
DGSL-12-40-PA
DGSL-12-50-PA
DGSL-12-80-PA
DGSL-12-100-PA
DGSL-12-150-PA
DGSL-16-10-PA
DGSL-16-20-PA
DGSL-16-30-PA
DGSL-16-40-PA
DGSL-16-50-PA
DGSL-16-80-PA
DGSL-16-100-PA
DGSL-16-150-PA
DGSL-20-10-PA
DGSL-20-20-PA
DGSL-20-30-PA
DGSL-20-40-PA
DGSL-20-50-PA
DGSL-20-80-PA
DGSL-20-100-PA
DGSL-20-150-PA
DGSL-20-200-PA
DGSL-25-10-PA
DGSL-25-20-PA
DGSL-25-30-PA
DGSL-25-40-PA
DGSL-25-50-PA
DGSL-25-80-PA
DGSL-25-100-PA
DGSL-25-150-PA
DGSL-25-200-PA
With cushioning E
10
4
20
30
10
6
20
30
40
50
10
8
20
30
40
50
80
10
10
20
30
40
50
80
100
10
12
20
30
40
50
80
100
150
10
16
20
30
40
50
80
100
150
10
20
20
30
40
50
80
100
150
200
10
25
20
30
40
50
80
100
150
200
Stroke
[mm]
Part No.
Type
570158
570159
570160
570161
570162
570163
570164
570165
570166
570167
570168
570169
570170
570171
570172
570173
570174
570175
570176
570177
570178
570179
570180
570181
570182
570183
570184
570185
570186
570187
570188
570189
570190
570191
570192
570193
570194
570195
570196
570197
570198
570199
570200
570201
570202
570203
570204
570205
570206
570207
570208
570209
570210
570211
570212
DGSL-4-10-EA
DGSL-4-20-EA
DGSL-4-30-EA
DGSL-6-10-EA
DGSL-6-20-EA
DGSL-6-30-EA
DGSL-6-40-EA
DGSL-6-50-EA
DGSL-8-10-EA
DGSL-8-20-EA
DGSL-8-30-EA
DGSL-8-40-EA
DGSL-8-50-EA
DGSL-8-80-EA
DGSL-10-10-EA
DGSL-10-20-EA
DGSL-10-30-EA
DGSL-10-40-EA
DGSL-10-50-EA
DGSL-10-80-EA
DGSL-10-100-EA
DGSL-12-10-EA
DGSL-12-20-EA
DGSL-12-30-EA
DGSL-12-40-EA
DGSL-12-50-EA
DGSL-12-80-EA
DGSL-12-100-EA
DGSL-12-150-EA
DGSL-16-10-EA
DGSL-16-20-EA
DGSL-16-30-EA
DGSL-16-40-EA
DGSL-16-50-EA
DGSL-16-80-EA
DGSL-16-100-EA
DGSL-16-150-EA
DGSL-20-10-EA
DGSL-20-20-EA
DGSL-20-30-EA
DGSL-20-40-EA
DGSL-20-50-EA
DGSL-20-80-EA
DGSL-20-100-EA
DGSL-20-150-EA
DGSL-20-200-EA
DGSL-25-10-EA
DGSL-25-20-EA
DGSL-25-30-EA
DGSL-25-40-EA
DGSL-25-50-EA
DGSL-25-80-EA
DGSL-25-100-EA
DGSL-25-150-EA
DGSL-25-200-EA
Mini slides DGSL

Technical data
Ordering data
Size
Stroke
[mm]
Part No.
With cushioning P1
10
543913
4
20
543914
30
543915
10
543921
6
20
543922
30
543923
40
543924
50
543925
10
543932
8
20
543933
30
543934
40
543935
50
543936
80
543937
10
543949
10
20
543950
30
543951
40
543952
50
543953
80
543954
100
543955
10
543969
12
20
543970
30
543971
40
543972
50
543973
80
543974
100
543975
150
543976
10
543991
16
20
543992
30
543993
40
543994
50
543995
80
543996
100
543997
150
543998
10
544014
20
20
544015
30
544016
40
544017
50
544018
80
544019
100
544020
150
544021
200
544022
10
544039
25
20
544040
30
544041
40
544042
50
544043
80
544044
100
544045
150
544046
200
544047
Type
Size
Stroke
[mm]
Part No.
DGSL-4-10-P1A
DGSL-4-20-P1A
DGSL-4-30-P1A
DGSL-6-10-P1A
DGSL-6-20-P1A
DGSL-6-30-P1A
DGSL-6-40-P1A
DGSL-6-50-P1A
DGSL-8-10-P1A
DGSL-8-20-P1A
DGSL-8-30-P1A
DGSL-8-40-P1A
DGSL-8-50-P1A
DGSL-8-80-P1A
DGSL-10-10-P1A
DGSL-10-20-P1A
DGSL-10-30-P1A
DGSL-10-40-P1A
DGSL-10-50-P1A
DGSL-10-80-P1A
DGSL-10-100-P1A
DGSL-12-10-P1A
DGSL-12-20-P1A
DGSL-12-30-P1A
DGSL-12-40-P1A
DGSL-12-50-P1A
DGSL-12-80-P1A
DGSL-12-100-P1A
DGSL-12-150-P1A
DGSL-16-10-P1A
DGSL-16-20-P1A
DGSL-16-30-P1A
DGSL-16-40-P1A
DGSL-16-50-P1A
DGSL-16-80-P1A
DGSL-16-100-P1A
DGSL-16-150-P1A
DGSL-20-10-P1A
DGSL-20-20-P1A
DGSL-20-30-P1A
DGSL-20-40-P1A
DGSL-20-50-P1A
DGSL-20-80-P1A
DGSL-20-100-P1A
DGSL-20-150-P1A
DGSL-20-200-P1A
DGSL-25-10-P1A
DGSL-25-20-P1A
DGSL-25-30-P1A
DGSL-25-40-P1A
DGSL-25-50-P1A
DGSL-25-80-P1A
DGSL-25-100-P1A
DGSL-25-150-P1A
DGSL-25-200-P1A
With cushioning Y3
10
4
20
30
10
6
20
30
40
50
10
8
20
30
543938
40
543939
50
543940
80
543941
10
10
20
30
543956
40
543957
50
543958
80
543959
100
543960
10
12
20
30
543977
40
543978
50
543979
80
543980
100
543981
150
543982
10
16
20
30
543999
40
544000
50
544001
80
544002
100
544003
150
544004
10
20
20
30
544023
40
544024
50
544025
80
544026
100
544027
150
544028
200
544029
10
25
20
30
544048
40
544049
50
544050
80
544051
100
544052
150
544053
200
544054
Type
DGSL-8-30-Y3A
DGSL-8-40-Y3A
DGSL-8-50-Y3A
DGSL-8-80-Y3A
DGSL-10-30-Y3A
DGSL-10-40-Y3A
DGSL-10-50-Y3A
DGSL-10-80-Y3A
DGSL-10-100-Y3A
DGSL-12-30-Y3A
DGSL-12-40-Y3A
DGSL-12-50-Y3A
DGSL-12-80-Y3A
DGSL-12-100-Y3A
DGSL-12-150-Y3A
DGSL-16-30-Y3A
DGSL-16-40-Y3A
DGSL-16-50-Y3A
DGSL-16-80-Y3A
DGSL-16-100-Y3A
DGSL-16-150-Y3A
DGSL-20-30-Y3A
DGSL-20-40-Y3A
DGSL-20-50-Y3A
DGSL-20-80-Y3A
DGSL-20-100-Y3A
DGSL-20-150-Y3A
DGSL-20-200-Y3A
DGSL-25-30-Y3A
DGSL-25-40-Y3A
DGSL-25-50-Y3A
DGSL-25-80-Y3A
DGSL-25-100-Y3A
DGSL-25-150-Y3A
DGSL-25-200-Y3A
Ordering data for modular products 44
43
Mini slides DGSL

Ordering data Modular product
0
M Mandatory data
0
O Options
0
M
Module No.
Function
Size
Stroke
Clamping unit
Cushioning
Position sensing
543902
543903
543904
543905
543906
543907
543908
543909
DGSL
4
6
8
10
12
16
20
25
10 200
E3
P
P1
Y3
E
Y11
N
Ordering
example
543904
DGSL
30
E3
Y3
Ordering table
Size
10
12
16
20
25
0
M Module No.
543902
543903
543904
543905
543906
543907
543908
543909
Function
Mini slide with recirculating ball bearing guide
Size
Stroke
[mm] 10
20
30
40
50
10
80
100
12
16
150
20
Condi
tions
25
200
0
O
Clamping unit
Attached
With piston rod in retracted position
Cushioning
Elastic cushioning rings/pads at both ends, end positions adjustable

Elastic cushioning rings/pads at both ends, end positions adjustable, with fixed stop

Elastic cushioning rings/pads at both ends, end positions adjustable, short design
Progressive shock absorber with reducing sleeve,

at both ends
No cushioning
0
M
Position sensing
-H-
Note
E3
Y3, Y11 Minimum stroke 30 mm
2
2
2
Code
Enter
code
DGSL
10
20
30
40
50
80
100
150
200
DGSL
C
E3
P
P1
Y3
E
Y11
N
A
Not with clamping unit C

components is not permitted.
Transfer order code

DGSL
44
Mini slides DGSL

Wearing parts kits and accessories
Ordering data Wearing parts kits
Size
Part No.
Type
Size
Part No.
Type
4
6
8
10
12
16
20
25
713747
713748
713749
713750
DGSL-12-
DGSL-16-
DGSL-20-
DGSL-25-
713743
713744
713745
713746
DGSL-4-
DGSL-6-
DGSL-8-
DGSL-10-
Material:
Anodised aluminum
Free of copper, PTFE and silicone
RoHS-compliant
Cover DADS
Dimensions and ordering data

For size Length
B1
B2
[mm]
4
6
8
10
12
16
20
25
-H-
30
500
50
500
80
500
50
100
500
50
150
500
50
150
500
50
100
200
500
50
100
200
500
B3
B4
D1
H1
H2
H3
22
1.9
0.4
2.8
17.9
7.5
31.2
1.4
2.8
22
8.2
2.5
36.3
1.9
0.3
2.8
26.5
8.2
43.6
2.8
2.2
1.2
3.4
32
12
3.4
51.7
2.7
0.5
3.4
38.8
12.8
4.25
60
4.3
3.1
2.25
3.4
43.7
15.2
74.8
3.6
2.8
1.2
4.4
53.2
18.9
6.5
88.4
3.5
2.7
0.7
4.4
64.7
18.3
L1
40
500
63
500
93
500
70
120
500
72
170
500
73
173
500
74
124
224
500
78
128
228
500
L2
4.5
90
90
90
10
90
10
90
10
90
10
90
2.5
10
90
2.5
Weight
[g]
Part No.
Type
2
27
4
33
8
42
11
18
75
12
28
82
21
49
141
28
46
83
184
34
55
98
213
1086663
1212468
1066625
1212476
1087413
1212478
1162400
1090689
1212479
1162406
1090732
1212480
1162410
1066591
1212503
1162412
1162415
1090823
1212521
1162417
1162419
1090895
1212523
DADS-AB-G6-4-30
DADS-AB-G6-4-500
DADS-AB-G6-6-50
DADS-AB-G6-6-500
DADS-AB-G6-8-80
DADS-AB-G6-8-500
DADS-AB-G6-10-50
DADS-AB-G6-10-100
DADS-AB-G6-10-500
DADS-AB-G6-12-50
DADS-AB-G6-12-150
DADS-AB-G6-12-500
DADS-AB-G6-16-50
DADS-AB-G6-16-150
DADS-AB-G6-16-500
DADS-AB-G6-20-50
DADS-AB-G6-20-100
DADS-AB-G6-20-200
DADS-AB-G6-20-500
DADS-AB-G6-25-50
DADS-AB-G6-25-100
DADS-AB-G6-25-200
DADS-AB-G6-25-500
Note
With the 500 mm covers, the

mounting hole must be made by the
customer.
The cover can be trimmed as required

by the customer.
45
Mini slides DGSL

Accessories
Intermediate position module DADM
The intermediate position module
enables an additional adjustable
position within the stroke range.
The module is attached separately,
directly next to the mini slide. It can
be mounted anywhere along the
mini slide.
The associated shock absorber
retainer 48 can be attached at
several points on the slide. The

position can be precisely adjusted
using the shock absorber.
The stop lever positions can be
sensed via proximity sensor
SME/SMT 50.
Push-in fittings are not included in
the scope of delivery.
Material:
Housing: Wrought aluminium alloy
Lever: High-alloy stainless steel
RoHS-compliant
Technical data Internet: dadm
-H-
Note
Push-in fittings are not included in the

scope of delivery.
1 Swivel stop lever inwards
2 Swivel stop lever outwards
3 DADM-EP-G6-10: SME/SMT-10
DADM-EP-G6-16: SME/SMT-8
For size
12, 16
20, 25
46
B1
21
26.5
B2
7
9
B3
D2
D3
D4
H7
D5
EE
H1
H2
0.1
D1
H7
5
5.5
10
12
9.5
11
5.5
6.6
10
12
M5
M6
M3
M5
46.9
65.2
35.4
47.4
Mini slides DGSL

Accessories
For size
H3
H4
H5
12, 16
20, 25
0.1
0.1
26.9
36.4
8.9
12.4
16.9
23.4
12.7
17
90
120
For size
T1
T2
T3
T4
T5
X1
+0.1
+0.2
0.1
H6
+0.2
12
16
20
25
L1
2.1
6.5
2.1
6.8
2.1
10
2.1
L2
L3
0.1
0.1
60
80
60
80
35.1
37.9
48.2
62.2
L4
L5
L6
L7
51
68
45
60
12
16
15
20
Weight
Part No.
Type
154
1492072
DADM-EP-G6-10
340
1478121
DADM-EP-G6-16
Part No.
Type
[g]
4.5
2.5
Ordering data
For size
Connector sleeve ZBV
12, 16
Centring sleeve ZBH

20, 25
1)
Description
For centring the intermediate position module (2 pieces included in scope of
delivery for the intermediate position module)
For centring the intermediate position module (2 pieces included in scope of

delivery for the intermediate position module)
PU1)
Technical data Internet: zbv

560254
ZBV-10-9
10
Technical data Internet: zbh

189653
ZBH-12
10
Packaging unit quantity
Mounting
The intermediate position module is
mounted directly next to the mini
slide and is fastened to the mounting
surface using two screws and centring
sleeves.
The shock absorber retainer is then
mounted on the slide of the mini
slide, also using two screws and
centring sleeves.
Precision adjustment:
The position can be precisely adjusted
via the screw-in depth of the shock
absorber. The shock absorber must
project by at least X = 1.5 mm.
47
Mini slides DGSL

Accessories
Material:
Anodised wrought aluminium alloy
RoHS-compliant
Shock absorber retainer DADP
DADP-ES-G6-12
DADP-ES-G6-20
1 0.02 for D3
For size
B1
B2
B3
B4
B5
D1
D2
D3
D4
H7
H1
H2
12
16
20
25
53
56
70
80
20
21
24
30
10
10.5
12
15
34.5
37
47.5
54.5
25.5
39.2
58
M10x1
M12x1
M14x1
M16x1
10
10
11
11
5.5
5.5
6.6
6.6
7
7
12
12
13
15
20
25
14
12.2
20
14
For size
H3
H4
L1
L2
L3
T1
T2
Weight
Part No.
Type
1812471
1812472
1812473
1812550
DADP-ES-G6-12
DADP-ES-G6-16
DADP-ES-G6-20
DADP-ES-G6-25
Part No.
Type
[g]
12
16
20
25
6.5
7.5
9
10
1
2.8
11
65
61
85
80
10
10
20
20
10
8
10
10
5.7
5.7
6.4
6.8
1.6
1.6
2.6
2.6
80
70
185
160
Ordering data
For size
Centring sleeve ZBH
12, 16

20, 25
1)
For centring the shock absorber retainer (2 pieces included in the scope of
delivery of the shock absorber retainer)
For centring the shock absorber retainer (2 pieces included in the scope of
delivery of the shock absorber retainer)
PU1)

186717
ZBH-7
10

548806
ZBV-12-9
10
Packaging unit
-H-
Note
A shock absorber retainer DADP-ES

is additionally required when
using an intermediate position
module
48
Description

components is not permitted
Cushioning components are not
included in the scope of delivery
The shock absorbers for mini

slides and for the associated
shock absorber retainer are of
identical size. Shock absorber
selection 49
The same cushioning component

as is used in the end positions of
the mini slide is used for cushion
ing the intermediate position
Mini slides DGSL

Accessories
Ordering data
For size
PU1)
For shock
absorber retainer
Description
Order code
Part No.
Type
Shock absorber DYEF--Y1

4
6
8
10
12
16
20
25
DADP-ES-G6-12
DADP-ES-G6-16
DADP-ES-G6-20
DADP-ES-G6-25
Flexible cushioning, without metal

stop
1179810
1179818
1179831
1179834
1179837
1179840
1179863
1179879
Technical data Internet: dyef

DYEF-M4-Y1
1
DYEF-M5-Y1
DYEF-M6-Y1
DYEF-M8-Y1
DYEF-M10-Y1
DYEF-M12-Y1
DYEF-M14-Y1
DYEF-M16-Y1
Shock absorber DYEF-S--Y1

4
6
8
10
12
16
20
25
DADP-ES-G6-12
DADP-ES-G6-16
DADP-ES-G6-20
DADP-ES-G6-25
Flexible cushioning, without metal

stop, short version
1152500
1152507
1152524
1152536
1152959
1153004
1153017
1153023

DYEF-S-M4-Y1
1
DYEF-S-M5-Y1
DYEF-S-M6-Y1
DYEF-S-M8-Y1
DYEF-S-M10-Y1
DYEF-S-M12-Y1
DYEF-S-M14-Y1
DYEF-S-M16-Y1
Shock absorber DYEF--Y1F

4
6
8
10
12
16
20
25
DADP-ES-G6-12
DADP-ES-G6-16
DADP-ES-G6-20
DADP-ES-G6-25
Flexible cushioning, with metal

stop
P1
548370
548371
548372
548373
548374
548375
548376
548377

DYEF-M4-Y1F
1
DYEF-M5-Y1F
DYEF-M6-Y1F
DYEF-M8-Y1F
DYEF-M10-Y1F
DYEF-M12-Y1F
DYEF-M14-Y1F
DYEF-M16-Y1F
Shock absorber DYSW

8
10
12
16
20
25
DADP-ES-G6-12
DADP-ES-G6-16
DADP-ES-G6-20
DADP-ES-G6-25
Progressive shock absorbers, both

ends
Y3
548070
548071
548072
548073
548074
548075
Technical data Internet: dysw

DYSW-4-6-Y1F
1
DYSW-5-8-Y1F
DYSW-7-10-Y1F
DYSW-8-14-Y1F
DYSW-10-17-Y1F
DYSW-12-20-Y1F
Reducing sleeve DAYH

10
12
16
20
25
DADP-ES-G6-12
DADP-ES-G6-16
DADP-ES-G6-20
DADP-ES-G6-25
For DYSW-4-6
For DYSW-5-8
For DYSW-7-10
For DYSW-8-14
For DYSW-10-17
1165476
1165480
1165484
1165488
1165491
DAYH-4
DAYH-5
DAYH-7
DAYH-8
DAYH-10
1)
49
Mini slides DGSL

Accessories
Ordering data
For size
Centring sleeve ZBH
4, 6
8, 10, 12, 16
20, 25
8, 10
12, 16
Part No.
Type
For centring loads and attachments (6 centring sleeves are

included in the scope of delivery of the mini slide)
189652
186717
150927
ZBH-5
ZBH-7
ZBH-9
For connecting two mini slides DGSL

Sizing information refers to the Y-axis
548802

ZBV-M4-7
3
548803
ZBV-M5-7
548804
ZBV-M6-9
20, 25
1)
PU1)
Brief description

10
Packaging unit
Ordering data
For size
One-way flow control valve GRLA
4, 6, 8
Part No.
Type
For regulating speed

Only one GRLA-M3-QS-3 can be mounted on the front with size 4
175041
175038
193137
193138
193143
193144
162965
162966
Technical data Internet: grla

GRLA-M3-QS-3
1
GRLA-M3
GRLA-M5-QS-3-D
GRLA-M5-QS-4-D
GRLA--QS-4-D
GRLA--QS-6-D
GRLA--QS-6-RS-B
GRLA--QS-8-RS-B
For connecting compressed air tubing with standard O.D.
153301
153304
153307
Technical data Internet: quick star

QSM-M3-3
10
QSM-M5-4
QSM-x-6
Cable length
[m]
Part No.
Type
2.5
0.3
0.3
551373
551375
551376
SMT-10M-PS-24V-E-2,5-L-OE
SMT-10M-PS-24V-E-0,3-L-M8D
SMT-10M-PS-24V-E-0,3-Q-M8D
Cable length
[m]
Part No.
Type
0.3
2.5
2.5
0.3
2.5
551367
551365
551369
173212
173210
SME-10M-DS-24V-E-0,3-L-M8D
SME-10M-DS-24V-E-2,5-L-OE
SME-10M-ZS-24V-E-2,5-L-OE
SME-10-SL-LED-24
SME-10-KL-LED-24
10, 12, 16
20, 25
20, 25
Push-in fitting QSM

4, 6, 8
10, 12, 16
20, 25
1)
PU1)
Brief description
Packaging unit
Proximity sensors for mini slide DGSL and intermediate position module DADM-EP-G6-10
Ordering data Proximity sensor for C-slot, magneto-resistive
Type of mounting
Switching
Electrical connection,
output
connection direction
Technical data Internet: smt
N/O contact
Insertable in the slot from
above
PNP
Cable, 3-wire, in-line

Plug M8x1, 3-pin, in-line
Plug M8x1, 3-pin, angled
Ordering data Proximity sensor for C-slot, magnetic reed1)

Type of mounting
Switching
Electrical connection,
output
connection direction
Technical data Internet: sme
N/O contact
1)
50
Insertable in the slot from

above
Contacting
Insertable in the slot

lengthwise
Contacting

Proximity sensors are not permitted with mini slide DGSL-4.
Mini slides DGSL

Accessories
Proximity sensors for intermediate position module DADM-EP-G6-16
Ordering data Proximity sensors for T-slot, magneto-resistive
Type of mounting
Switch
output
Technical data Internet: smt

Electrical connection
Cable length
[m]
Part No.
Type
Cable, 3-wire
Plug M8x1, 3-pin
Plug M12x1, 3-pin
Cable, 3-wire
Plug M8x1, 3-pin
2.5
0.3
0.3
2.5
0.3
574335
574334
574337
574338
574339
SMT-8M-A-PS-24V-E-2,5-OE
SMT-8M-A-PS-24V-E-0,3-M8D
SMT-8M-A-PS-24V-E-0,3-M12
SMT-8M-A-NS-24V-E-2,5-OE
SMT-8M-A-NS-24V-E-0,3-M8D
Electrical connection
Cable length
[m]
Part No.
Type
Cable, 3-wire
2.5
5.0
2.5
0.3
2.5
0.3
543862
543863
543872
543861
150855
150857
SME-8M-DS-24V-K-2,5-OE
SME-8M-DS-24V-K-5,0-OE
SME-8M-ZS-24V-K-2,5-OE
SME-8M-DS-24V-K-0,3-M8D
SME-8-K-LED-24
SME-8-S-LED-24
Electrical connection, right
Cable length
[m]
Part No.
Type
Straight socket, M8x1, 3-pin
Cable, open end, 3-wire
Angled socket, M8x1, 3-pin
Cable, open end, 3-wire
2.5
5
2.5
5
541333
541334
541338
541341
NEBU-M8G3-K-2.5-LE3
NEBU-M8G3-K-5-LE3
NEBU-M8W3-K-2.5-LE3
NEBU-M8W3-K-5-LE3
N/O contact
Insertable in the slot from above,
flush with cylinder profile,
short design
PNP
NPN
Ordering data Proximity sensors for T-slot, magnetic reed

Type of mounting
Switch
output
Technical data Internet: sme
N/O contact
Insertable in the slot from above,
flush with cylinder profile
Insertable in the slot lengthwise,

flush with the cylinder profile
Ordering data Connecting cables

Electrical connection, left
Contacting
Contacting
Cable, 2-wire
Plug M8x1, 3-pin
Cable, 3-wire
Plug M8x1, 3-pin
Technical data Internet: nebu
51
Mini slides DGSL

Accessories
-H-
Material:
Wrought aluminium alloy
RoHS-compliant
Adapter kit
HMSV
Permissible drive/drive combinations with adapter kit

Combination
1 Drive
Size
DGSL/DGSL
The kit includes the individual

mounting interface as well as the
necessary mounting material.
2 Drive
Size
DGSL
4
DGSL
4
4, 6
8, 10
8, 10
4, 6
8
10
10
12, 16
12
8, 10
12
16
12
16
16
20, 25
20, 25
12, 16
20
25
25
HMP
16
20
25
32
DGSL
16
16, 20
20, 25
25
Adapter kit
CRC1)
Part No.
HMP/DGSL
Note
Type
Quantity
required
PU2)
189652
189652
548802
186717
186717
548803
186717
186717
186717
548804
150927
150927
M3x7 DIN 9123)

ZBH-54)
M3x10 DIN 9123)
ZBH-54)
ZBV-M4-7
M4x12 DIN 9123)
ZBH-74)
M4x14 DIN 9123)
ZBH-74)
ZBV-M5-7
M5x14 DIN 9123)
ZBH-74)
M5x16 DIN 9123)
ZBH-74)
M5x18 DIN 9123)
ZBH-74)
ZBV-M6-9
M6x20 DIN 9123)
ZBH-94)
M6x30 DIN 9123)
ZBH-94)
2
2
2
2
1
2
2
2
2
1
2
2
2
2
2
2
1
2
2
2
2
10
10
3
10
10
3
10
10
10
3
10
10
548779
HMSV-49
HMSV
1)
2)
3)
4)
52
Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo
sphere typical for industrial applications.
The screws listed are not included in the scope of delivery of the drives
The centring sleeves are included in the scope of delivery of the drives
Mini slides DGSL

Accessories
-H-
Material:
RoHS-compliant
Adapter kit
HAPS, HMSV

Combination
1 Drive
Size
SLG/DGSL
Note

mounting interface as well as the
necessary mounting material.
2 Drive
Size
Adapter kit
CRC1)
Part No.
SLG
8, 12
12
18
DGSL
4, 6
8, 10
8, 10, 12
HAPS
DGC
8, 12
18
18
25
32, 40
DGSL
4, 6
8, 10
12, 16
12, 16, 20, 25
20, 25
HMSV
DGE-
25
40
DGSL
12, 16, 20, 25
20, 25
HMSV
Type
Quantity
required
PU2)
189533
HAPS-11
189534
HAPS-12
548777
548778
189657
548781
548780
HMSV-47
HMSV-48
HMSV-41
HMSV-51
HMSV-50
1
1
1
1
1
1
1
1
1
1
548781
548780
HMSV-51
HMSV-50
1
1
1
1
DGC/DGSL
DGE/DGSL
1)

53
Mini slides DGSL

Accessories
-H-
Material:
RoHS-compliant
Adapter kit
HMSV

Combination
1 Drive
Size
EGC/DGSL
1
Note

mounting interface as well as the ne
cessary mounting material.
2 Drive
Size
Adapter kit
CRC1)
Part No.
EGC
50
DGSL
4, 6
HMSV
70
8, 10
70
12, 16
80
Type
Quantity
required
PU2)
548777
HMSV-47
548778
HMSV-48
189657
HMSV-41
12, 16, 20, 25
548781
HMSV-51
120
20, 25
548780
HMSV-50
EGSL
35
45, 55
45
DGSL
4, 6, 8, 10
8, 10
12, 16
55
12, 16
75
75
12, 16
20
35
4, 6, 8, 10
1088262
548803
186717
186717
548804
150927
1088327
HMSV-70
ZBV-M5-7
M5x14 DIN 9123)
ZBH-74)
M5x12 DIN 9123)
ZBH-74)
ZBV-M6-9
M6x20 DIN 9123)
ZBH-94)
HMSV-73
1
1
2
2
2
2
1
2
2
1
10
10
3
10
2
EGSL/DGSL
HMSV
2
1)
2)
3)
4)
54

The screws listed are not included in the scope of delivery of the drives
The centring sleeves are included in the scope of delivery of the drives

DGSL en

Uploaded by

Copyright:

Available Formats

DGSL en

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DGSL en

Uploaded by

Copyright:

Available Formats

Mini slides DGSL

Mini slides DGSL

System product for handling and

Highly flexible thanks to a wide

Drive body, slide, yoke plate

The technology in detail

3 Coarse stroke adjustment

The cover stops foreign parts or dirt

The end stop for the advanced end

5 Innovative guide unit

Proximity sensors can be

Mechanical locking when the end

Choice of two sides:

Subject to change 2015/06

Mini slides DGSL

The intermediate position module

The symmetric design enables the

System product for handling and assembly technology

System components and accessories

2015/06 Subject to change

Wide range of combinations possible within handling and assembly technology

Mini slides DGSL

Operation without cushioning

For centring loads and attachments

For regulating speed

Flexible stop for medium loads at medium speed

Subject to change 2015/06

Mini slides DGSL

With piston rod in retracted position

Elastic cushioning without metal end position,

Via proximity sensor

2015/06 Subject to change

Mini slides DGSL

Wearing parts kits

General technical data

Operating and environmental conditions

Compressed air to ISO 8573-1:2010 [7:4:4]

Piston j, forces and impact energy

Progressive shock absorber, at both ends

Progressive shock absorber with reducing sleeve, at both ends

With reducing sleeve and next smallest shock absorber

Subject to change 2015/06

Mini slides DGSL

Product weight without cushioning component

Moving load without cushioning component

With reducing sleeve and next smallest shock absorber

2015/06 Subject to change

Mini slides DGSL

3 Centring sleeve ZBH

Mounting example with connector sleeve ZBV

Subject to change 2015/06

Mini slides DGSL

Linear travel accuracy y as a function of stroke length l

2015/06 Subject to change

Mini slides DGSL

the next but one smaller standard

Removal of the fixed stops can

By adjusting the fixed stop by the