Scribd Logo
Upload

Welcome to Scribd!

  • 85 views

    Bharat Heavy Electricals Limited: 01. This Document Contains 8 Sheets. (Including This Sheet)

    Uploaded by

    Vikas Taneja
    This document contains drawings and specifications for ladder and perforated cable trays and accessories. It includes details for 600mm, 300mm, and 150mm wide cable trays as well as couplers, covers, horizontal and vertical bends. All materials are hot rolled mild steel galvanized for corrosion protection. Dimensions and tolerances are provided for fabrication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bharat Heavy Electricals Limited: 01. This Document Contains 8 Sheets. (Including This Sheet)

    Uploaded by

    Vikas Taneja
    85 views8 pages
    This document contains drawings and specifications for ladder and perforated cable trays and accessories. It includes details for 600mm, 300mm, and 150mm wide cable trays as well as couplers, covers, horizontal and vertical bends. All materials are hot rolled mild steel galvanized for corrosion protection. Dimensions and tolerances are provided for fabrication.

    Original Description:

    IS-4-GA-689-101-E043 (3)

    Original Title

    IS-4-GA-689-101-E043 (3)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains drawings and specifications for ladder and perforated cable trays and accessories. It includes details for 600mm, 300mm, and 150mm wide cable trays as well as couplers, covers, horizontal and vertical bends. All materials are hot rolled mild steel galvanized for corrosion protection. Dimensions and tolerances are provided for fabrication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    85 views8 pages

    Bharat Heavy Electricals Limited: 01. This Document Contains 8 Sheets. (Including This Sheet)

    Uploaded by

    Vikas Taneja
    This document contains drawings and specifications for ladder and perforated cable trays and accessories. It includes details for 600mm, 300mm, and 150mm wide cable trays as well as couplers, covers, horizontal and vertical bends. All materials are hot rolled mild steel galvanized for corrosion protection. Dimensions and tolerances are provided for fabrication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    01. THIS DOCUMENT CONTAINS 8 SHEETS.

    (INCLUDING THIS SHEET)

    BHARAT HEAVY ELECTRICALS LIMITED


    1

    REVISED AS PER BHEL & DVC COMMENTS.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    GA DRAWINGS OF CABLE TRAY & ACCESSORIES

    LADDER TYPE CABLE TRAYS - 600mm,300mm & 150mm

    2500
    125

    M8 BOLT & WASHER


    (TYP)

    250

    125
    C

    WELDED NUT (M8)

    RUNNER

    23.6

    RUNG

    RUNG

    WELDED NUT (M8)


    (TYP)

    500

    DETAIL-A

    750

    750

    500

    30

    23.6
    T

    DETAIL-B

    M8 BOLT & WASHER


    (TYP)

    M8 BOLT & WASHER


    (TYP)

    VIEW - AA

    TOP VIEW

    50

    50

    30

    19.5
    45

    NOTES:
    35.5

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079. (GRADE-O, MIN THICKNESS-2mm)
    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF ZINC COATING SHALL BE NOT LESS THAN 75 MICRONS).

    DETAIL-A

    MASS OF ZINC COATING = 610 gm/sqmm

    DETAIL-B

    03. ALL DIMENSIONS ARE IN 'mm'.


    04. TOLERANCE : I.S. 1852.
    05. FOUR COUPLER PLATES TO BE PROVIDED. TWO EACH ON EITHER SIDE OF TRAY.

    15
    12

    06. M8X10mm HEXAGONAL BOLT, NUT & WASHERS SHALL BE USED FOR CONNECTING

    THE TWO CABLE TRAYS ALONG WITH COUPLER PLATE.


    07.ALL NUT,BOLTS,WASHERS AND OTHER ACCESSORIES SHALL BE ZINC PASSIVATED.

    WIDTH
    (W)

    50
    T

    B
    SLOT SIZE : 25 x 10

    RUNG DETAILS

    VIEW - BB

    REVISED AS PER BHEL & DVC COMMENTS.

    HEIGHT COLLAR
    (H)
    (C)

    THK
    (T)

    604 mm

    100 mm

    15 mm

    2 mm

    304 mm

    100 mm

    15 mm

    2 mm

    154 mm

    100 mm

    15 mm

    2 mm

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    BHARAT HEAVY ELECTRICALS LIMITED

    TYPICAL DRAWING FOR LADDER CABLE TRAYS

    PERFORATED TYPE CABLE TRAYS - 600mm,300mm &150mm

    M8 BOLT & WASHER


    (TYP)

    SLOT SIZE : 20 x 10

    2500

    25 40
    T
    23.6

    10
    WELDED NUT (M8)
    (TYP)

    w
    WELDED NUT (M8)
    (TYP)

    23.6
    C

    500

    DETAIL-A

    750

    750
    M8 BOLT & WASHER
    (TYP)

    30

    50

    500
    DETAIL-B

    A
    1

    VIEW - AA

    M8 BOLT & WASHER


    (TYP)

    TOP VIEW

    50

    30

    19.5
    45
    35.5

    NOTES:

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079. (GRADE-O, MIN THICKNESS-2mm)

    DETAIL-A

    DETAIL-B

    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF ZINC COATING SHALL BE NOT LESS THAN 75 MICRONS).

    MASS OF ZINC COATING = 610 gm/sqmm


    03. ALL DIMENSIONS ARE IN 'mm'.
    04. TOLERANCE : I.S. 1852.
    05. FOUR COUPLER PLATES TO BE PROVIDED. TWO EACH ON EITHER SIDE OF TRAY.

    WIDTH
    (W)

    HEIGHT COLLAR
    (H)
    (C)

    06. M8X10mm HEXAGONAL BOLT, NUT & WASHERS SHALL BE USED FOR CONNECTING

    THK
    (T)

    THE TWO CABLE TRAYS ALONG WITH COUPLER PLATE.


    07.ALL NUT,BOLTS,WASHERS AND OTHER ACCESSORIES SHALL BE ZINC PASSIVATED.

    154 mm

    100 mm

    15 mm

    2 mm

    304 mm

    100 mm

    15 mm

    2 mm

    604 mm

    100 mm

    15 mm

    2 mm

    BHARAT HEAVY ELECTRICALS LIMITED


    1

    REVISED AS PER BHEL & DVC COMMENTS.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    TYPICAL DRAWING FOR PERFORATED CABLE TRAYS

    COUPLER PLATE FOR CABLE TRAYS - 600mm,300mm & 150mm

    210
    25

    50

    60

    A
    50

    25

    15
    75 45

    80

    15

    A
    SLOT SIZE : 20 x 10

    VIEW - AA

    COUPLER PLATE DETAILS

    TYPICAL COUPLER PLATE FIXING ARRANGEMENT FOR LADDER TRAY

    COUPLER PLATE
    (TYP)

    TYPICAL COUPLER PLATE FIXING ARRANGEMENT FOR PERFORATED TRAY

    COUPLER PLATE
    (TYP)

    TRAY-1

    TRAY-2

    TRAY-1

    RUNG

    TRAY-2

    C
    T

    B
    Top View (Without Coupler plate)

    NOTES:

    View - BB

    Top View (Without Coupler plate)

    View - CC

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079. (GRADE-O)
    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF ZINC COATING SHALL BE NOT LESS THAN 75 MICRONS).
    MASS OF ZINC COATING = 610 gm/sqmm
    03. ALL DIMENSIONS ARE IN 'mm'.
    04. TOLERANCE : I.S. 1852.
    05. FOUR COUPLER PLATES TO BE PROVIDED. TWO EACH ON EITHER SIDE OF TRAY,COUPLER PLATE THICKNESS - 3mm (MIN.)
    06. M8X10mm HEXAGONAL BOLT, NUT & WASHERS SHALL BE USED FOR CONNECTING

    BHARAT HEAVY ELECTRICALS LIMITED

    THE TWO CABLE TRAYS ALONG WITH COUPLER PLATE.


    07.ALL NUT,BOLTS,WASHERS AND OTHER ACCESSORIES SHALL BE ZINC PASSIVATED.

    REVISED AS PER BHEL & DVC COMMENTS.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    TYPICAL DRAWING FOR CABLE TRAY COUPLER PLATES

    COVER FOR CABLE TRAYS - 600mm,300mm &150mm

    2500

    SLOT SIZE : 20 x 10
    (TYP)

    SLOT SIZE : 20 x 10
    (TYP)

    25 25

    TOP VIEW

    40

    50

    VIEW - AA

    NOTES:

    SLOT SIZE : 20 x 10
    (TYP)

    40
    50

    25
    125

    375

    750

    750

    SIDE VIEW

    25
    375

    125

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079.(16 SWG)
    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF ZINC COATING SHALL
    BE NOT LESS THAN 75 MICRONS).MASS OF ZINC COATING = 610 gm/sqmm

    WIDTH OF TRAY
    COVER (W)

    THK
    (T)

    154 mm

    16 SWG

    304 mm

    16 SWG

    604 mm

    16 SWG

    03. ALL DIMENSIONS ARE IN 'mm'.


    04. TOLERANCE : I.S. 1852.

    BHARAT HEAVY ELECTRICALS LIMITED


    1

    REVISED AS PER BHEL & DVC COMMENTS.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    TYPICAL DRAWING FOR CABLE TRAY COVER

    A
    DETAIL-A

    CABLE TRAY (LADDER) HORIZONTAL BENDS - 600mm,300mm &150mm

    DETAIL-B

    100

    A
    DETAIL-A

    DETAIL-B

    DETAIL-A

    100

    100

    DETAIL-B

    DETAIL-A

    DETAIL-B

    100

    DETAIL-A

    100

    100
    DETAIL-B

    DETAIL-B

    DETAIL-A

    (W)
    150 mm

    300 mm

    600 mm

    100

    DETAIL-A

    L-BEND

    30

    DETAIL-A

    100

    DETAIL-B

    100

    DETAIL-B

    T-BEND

    CROSS TYPE BEND

    (R)

    (A)

    (E)

    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm

    1175 mm
    725 mm
    575 mm
    425 mm
    1175 mm
    725 mm
    575 mm
    425 mm
    1175 mm
    725 mm
    575 mm
    425 mm

    1250 mm
    800 mm
    650 mm
    500 mm
    1325 mm
    875 mm
    725 mm
    575 mm
    1475 mm
    1025 mm
    875 mm
    725 mm

    50

    (W)
    1

    150 mm

    300 mm

    600 mm

    50

    30

    19.5

    NOTES:

    DETAIL-A

    (R)

    (A)

    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm

    1250 mm
    800 mm
    650 mm
    500 mm
    1325 mm
    875 mm
    725 mm
    575 mm
    1475 mm
    1025 mm
    875 mm
    725 mm

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079.(GRADE-O, MIN THICKNESS-2mm)
    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF
    ZINC COATING SHALL BE NOT LESS THAN 75 MICRONS).
    MASS OF ZINC COATING = 610 gm/sqmm

    45

    03. ALL DIMENSIONS ARE IN 'mm'.


    04. TOLERANCE : I.S. 1852.

    35.5

    05. TO FACILITATE ASSEMBLY ALL ACCESSORIES AT ENDS SHALL


    HAVE 100mm STRAIGHT PORTION.

    DETAIL-A

    DETAIL-B

    REVISED AS PER BHEL & DVC COMMENTS.

    06. FOUR COUPLER PLATES TO BE PROVIDED. TWO EACH ON


    EITHER SIDE OF TRAY.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    BHARAT HEAVY ELECTRICALS LIMITED

    TYPICAL DRAWING FOR CABLE TRAY


    HORIZONTAL BENDS (LADDER)

    DETAIL-B

    A
    DETAIL-A

    CABLE TRAY (PERFORATED) HORIZONTAL BENDS - 600mm,300mm &150mm

    DETAIL-B

    100

    DETAIL-A

    DETAIL-B

    100

    DETAIL-A

    100

    DETAIL-B

    100

    DETAIL-A

    100

    W
    W

    DETAIL-B
    DETAIL-B

    DETAIL-A

    A
    A

    DETAIL-B

    DETAIL-B

    DETAIL-A

    100

    (W)
    150 mm

    300 mm

    600 mm

    DETAIL-A

    DETAIL-B

    DETAIL-A

    L-BEND

    30

    100

    100

    100

    DETAIL-A

    T-BEND

    (R)

    (A)

    (E)

    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm

    1175 mm
    725 mm
    575 mm
    425 mm
    1175 mm
    725 mm
    575 mm
    425 mm
    1175 mm
    725 mm
    575 mm
    425 mm

    1250 mm
    800 mm
    650 mm
    500 mm
    1325 mm
    875 mm
    725 mm
    575 mm
    1475 mm
    1025 mm
    875 mm
    725 mm

    50

    CROSS TYPE BEND

    (W)
    1

    150 mm

    300 mm

    600 mm

    50

    30

    19.5

    NOTES:

    (R)

    (A)

    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm
    1050mm
    600mm
    450mm
    300mm

    1250 mm
    800 mm
    650 mm
    500 mm
    1325 mm
    875 mm
    725 mm
    575 mm
    1475 mm
    1025 mm
    875 mm
    725 mm

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079.(GRADE-O, MIN THICKNESS-2mm)
    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF
    ZINC COATING SHALL BE NOT LESS THAN 75 MICRONS).
    MASS OF ZINC COATING = 610 gm/sqmm

    45

    03. ALL DIMENSIONS ARE IN 'mm'.


    04. TOLERANCE : I.S. 1852.

    35.5

    05. TO FACILITATE ASSEMBLY ALL ACCESSORIES AT ENDS SHALL


    HAVE 100mm STRAIGHT PORTION.

    DETAIL-A

    DETAIL-B

    REVISED AS PER BHEL & DVC COMMENTS.

    06. FOUR COUPLER PLATES TO BE PROVIDED. TWO EACH ON


    EITHER SIDE OF TRAY.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    BHARAT HEAVY ELECTRICALS LIMITED

    TYPICAL DRAWING FOR CABLE TRAY


    HORIZONTAL BENDS (PERFORATED)

    DETAIL-B

    CABLE TRAY VERTICAL BENDS - 600mm,300mm &150mm


    (COMMON FOR PERFORATED & LADDER TRAYS )

    DETAIL-B

    DETAIL-B

    500

    100

    75

    75

    100

    500

    R300

    R300

    500

    100

    75
    75

    DETAIL-A

    500
    DETAIL-A

    VERTICALLY OUTSIDE

    VERTICALLY INSIDE

    NOTES:
    30

    50

    50

    30

    100

    01. RAW MATERIAL : HOT ROLLED MS SHEET AS PER I.S. 1079.(GRADE-O, MIN THICKNESS-2mm)
    02. FINISH : GI (HOT DIP GALVANIZED THICKNESS OF
    ZINC COATING SHALL BE NOT LESS THAN 75 MICRONS).
    MASS OF ZINC COATING = 610 gm/sqmm

    19.5
    45

    03. ALL DIMENSIONS ARE IN 'mm'.


    04. TOLERANCE : I.S. 1852.

    35.5

    05. TO FACILITATE ASSEMBLY ALL ACCESSORIES AT ENDS SHALL


    HAVE 100mm STRAIGHT PORTION.

    DETAIL-A

    DETAIL-B

    REVISED AS PER BHEL & DVC COMMENTS.

    06. FOUR COUPLER PLATES TO BE PROVIDED. TWO EACH ON


    EITHER SIDE OF TRAY.

    K.VASANTH

    31.03.2015

    K.VASANTH

    31.03.2015

    K.G.S

    31.03.2015

    K.M.M

    31.03.2015

    BHARAT HEAVY ELECTRICALS LIMITED

    TYPICAL DRAWING FOR CABLE TRAY VERTICAL BENDS

    You might also like