Lumizs Marine’s Post

Our hot water circulation shielded pump features NPT 1 inch (25.4 mm) inlet/outlet. Extraly equipped with a common NPT3/4(19.05 mm) inch adapter. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation shielded pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6m (20ft). Low-noise operation.

Our hot water circulation shielded pump features NPT 1 inch (25.4 mm) inlet/outlet. Extraly equipped with a common NPT3/4(19.05 mm) inch adapter. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation shielded pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6m (20ft). Low-noise operation.

Discover the key to optimal steam conditioning system performance in Armour Valve’s latest blog post below! Temperature control valves are not meant to be used for isolation. Leaving these valves in a closed position compromises the isolation of the steam conditioning valve, allowing high-pressure water to infiltrate the steam system which can lead to potential leaks and consequential damage. 👇Learn how our actuated isolation valves have become a game-changer, minimizing downtime, and delivering cost savings for our clients. 👇 #ArmourValve #Valves #PowerGeneration #ControlValves #IsolationValves #ValveIndustry #ValveSupplier

Qualitative thermography saves me time in the field. In this situation it wasn't necessary for me to get super specific about the temperature details. Knowing the load (2.2 amps) and that both lines of the 2-pole breaker were carrying the same load, was enough to determine there was a problem that needed more attention. #infrared #electricalmaintenance #NFPA70B #firesafety

***Product Spotlight*** PROTEGO®’s VD/TS Pressure/Vacuum Relief Valve ensures maximum tank safety while reducing emissions. Its optimized weather hood and integrated flame arrester unit provide top-notch protection in harsh environments. Learn more about our innovative valve technology here: https://lnkd.in/gJQEHyfq #IndustrialSafety #PROTEGO #EmissionsReduction #ValveTechnology #TechTuesday

Excessive Water Discharge from Fire Pump PRV. Pressure relief valve (PRV) is used in the discharge of fire pump to automatically relieve excessive pressure, so to maintain constant pressure. It allows the fire pump to be stopped without causing surging. Huge amount of water discharge from this Pump.

The water heater micro switch is a very important safety accessory in the water heater water and gas linkage device, or called water valve linkage.   When water flows in the inlet pipe, the micro switch will close. After the circuit is turned on, the hot water flows out normally.

The water heater micro switch is a very important safety accessory in the water heater water and gas linkage device, or called water valve linkage. When water flows in the inlet pipe, the micro switch will close. After the circuit is turned on, the hot water flows out normally.

Checking pump amperages is one of the tools we use to check on the condition of pump. #watertreatment #wastewatertreatment

Creating a Controlled Corrosion Environment with Precision Flow Monitoring Before atomizing heated salt solutions in this corrosion test cabinet, compressed air flows through a heated water column, ensuring optimal air temperature and humidity levels for accurate testing. Key to this setup is the Series VF Visi-Float® Flowmeter, which enables precise adjustment of the bubbler air flow, maintaining compliance with stringent test standards. Curious to learn more about how the Series VF enhances flow monitoring? Check it out here ➡️ https://hubs.la/Q02Rd4Sm0 #DwyerOmega #DwyerInstruments #Flowmeter #Flowmonitoring