Brian Mills’ Post

Our hot water circulation shielded pump features NPT 1 inch (25.4 mm) inlet/outlet. Extraly equipped with a common NPT3/4(19.05 mm) inch adapter. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation shielded pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6m (20ft). Low-noise operation.

Our hot water circulation shielded pump features NPT 1 inch (25.4 mm) inlet/outlet. Extraly equipped with a common NPT3/4(19.05 mm) inch adapter. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation shielded pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6m (20ft). Low-noise operation.

Johnson Pump Bilge Alert High Water Alarm - 12V Sensor [72303]

How To Do Automatic Water Pump Wiring With Float less relay

***Product Spotlight*** PROTEGO®’s VD/TS Pressure/Vacuum Relief Valve ensures maximum tank safety while reducing emissions. Its optimized weather hood and integrated flame arrester unit provide top-notch protection in harsh environments. Learn more about our innovative valve technology here: https://lnkd.in/gJQEHyfq #IndustrialSafety #PROTEGO #EmissionsReduction #ValveTechnology #TechTuesday

We provide flow , pressure, level & temperature measurement solution of all types of fluids how critical the process condition it could be no issue. #flow_meter #pressure_sensor #level_sensor #temperature_sensor #excelbd_fce

The DROP Pump Controller is a device that can be added to a DROP system or used by itself, with the addition of the DROP Hub. The DROP Pump Controller monitors your water flow and will alert you to excessive usage helping to prevent or reduce water damage in the event of a burst pipe or appliance leak. Pump Diagnostics • Monitor pump current and protect the pump from overloads using an electronic Class 10 overload. • Monitor incoming voltage and protect the pump in high or low voltage conditions by not turning on the pump. • Monitors pressure and motor current to detect pump run dry conditions and open discharge conditions. • Short cycle notification to indicate pressure tank or other equipment failures. Home Protection • Monitors for local leaks using a leak detection probe or cable that is connected on the underside of the housing. • Monitors water flow by connecting a water meter to the appropriate connection on the underside of the housing. • Monitors temperature of the general area to protect from freezing conditions. • Shuts the pump off if a leak is detected by any DROP component in the system. • App can be used to shut off the pump from anywhere that you have an internet connection. (The DROP system must have an active internet connection for this feature). Chandler Systems Inc

🌐 Mitigate or Prevent Water Hammer with Variable Speed Actuators 👉https://lnkd.in/e-YsFHiE Article by Pumps & Systems Media #pumpingsystems #pumps #waterhammer #maintenance #maintenancemanager #industrialmaintenance #pumpmaintenance

An automatic venting system plays a crucial role in protecting mechanical seals from various issues related to trapped gases. By ensuring consistent lubrication (avoids dry run), reducing heat generation (trapped gases interrupts lubrication) , minimizing cavitation, maintaining pressure balance, and preventing corrosion (oxidation by gases), such a system enhances the overall performance, reliability, and lifespan of mechanical seals. This leads to improved operational efficiency and reduced maintenance costs, making it an essential component in liquid handling systems.