Finnboat - Finnish Marine Industries Federation / Venealan keskusliitto

Finnboat - Finnish Marine Industries Federation / Venealan keskusliitto

Maritime Transportation

Finnish Marine Industries Federation Finnboat is the umbrella organisation for Finland's marine industry and trade.

About us

Finnish Marine Industries Federation Finnboat is the umbrella organisation for Finland's marine industry and trade. Finnboat membership represents close to one hundred percent of both the nation's domestic marine industry turnover and the value of boat exports. Finnboat on maamme venealan teollisuuden ja kaupan toimialajärjestö. Finnboatin jäsenkunta vastaa lähes sataprosenttisesti alan kotimaan liikevaihdosta ja Suomen veneviennistä. Sivulta www.suomiveneilee.fi löydät nopeasti ajan tasalla olevat tiedot jäsenyritysten uusista ja käytetyistä veneistä ja moottoreista sekä tarvikkeista ja muista palveluista.

Sivusto
http://www.finnboat.fi/
Toimiala
Maritime Transportation
Yrityksen koko
2-10 employees
Päätoimipaikka
Helsinki
Tyyppi
Voittoa tavoittelematon

Sijainnit

Työntekijät Finnboat - Finnish Marine Industries Federation / Venealan keskusliitto

Päivitykset

  • Meet us at the #METSTRADE 2024! METSTRADE is the world’s largest marine equipment trade show connecting marine and boating industry professionals from around the world. At the Finnish national pavilion, the Finnish boating equipment industry with almost 20 companies presents solutions that are designed to perform in the most demanding conditions of the Nordic countries and are therefore fit for use all over the world. “METSTRADE showcases the spirit of innovation in the boating industry. We see familiar exhibitors with new products, long-standing players returning, and new innovations emerging every year,” says Jarkko Pajusalo, CEO of the Finnish Marine Industries Federation Finnboat. ”This year, we’re excited to present groundbreaking Finnish companies like X-Fender and SimplyDC, bringing fresh perspectives to the marine sector. Finnish companies continue to be increasingly active, which is also reflected in the growth of the Finnish pavilion.” METSTRADE 2024 will take place this year from the 19th to the 21st November in Amsterdam at the RAI Convention Centre. The Finnish pavilion can be found in hall 1 next to the neighboring Swedish and Norwegian pavilions.

    • METSTRADE Finnish Pavilion by Finnboat
  • Happy Holidays from Finnboat! We wish you a joyous holiday season filled with warmth, peace, and cherished moments with loved ones. May the new year bring you success, prosperity, and unforgettable boating adventures. We look forward to seeing you at the upcoming boating events in Finland: - Helsinki International Boat Show Vene 25 Båt, February 7-16 - Naantali Boat Show, May 23-25 #HappyHolidays #Finnboat #Boating #MarineIndustry #Finland

    • Kuvalle ei ole vaihtoehtoista tekstikuvausta
  • We are excited to showcase nearly 20 Finnish companies presenting their latest innovations, services, and products at METSTRADE 2024, the world’s largest marine equipment trade show. 🌍⚓ 📍 The Finnish Pavilion in Hall 1 at the RAI Convention Centre in Amsterdam is full of cutting-edge technology, sustainable solutions, and exceptional craftsmanship that define the Finnish boating industry. This year, METSTRADE is open one more day for marine and boating professionals, offering even more opportunities to connect and explore.

  • Discover boating industry innovations at METSTRADE 2024: A product may initially be very traditional and established, but with expertise and continuous product development, manufacturers and designers are able to meet the changing and new needs of users. Being the leading manufacturer of wooden oars in Europe, Oy Lahnakoski Ab is a family enterprise where expertise and experience have been honed in four generations. Extensive range includes oars, paddles, flagpoles, boathooks and more. ”Our oars are real oars, our paddles are both handy and waterworthy, our flagpoles provide a handsome finishing touch, and all details contribute to the whole.”

    • Lahnakoski oars
  • Discover boating industry innovations at METSTRADE 2024: Experienced heater manufacturers Wallas-Marin Oy and Safire represent Nordic heater expertise tested in Arctic conditions at the METSTRADE event. Wallas SwitchMaster brings smart management and comfort to boating, with Wallas App serving as its user interface. Through the Wallas App, users can remotely turn on the boat’s lighting before arriving, enhancing safety. The refrigerator can also be pre-cooled to keep food fresh for longer. The remote-controlled ventilation reduces moisture inside the boat, improving air quality and helping prevent moisture buildup. SwitchMaster enables automatic, cabin-specific control of the boat’s heating system, allowing precise temperature adjustment in different zones, such as sleeping cabins and the saloon. Wallas Matrix heaters: For the quietest heating system on the market, Wallas have developed new steplessly-controlled matrix heaters with individual thermostats, allowing multiple cabins to be heated within their own temperature zones. With low speeds and an independent thermostat, even small sleeping cabins can receive the right amount of heat almost silently, avoiding the constant start/stop cycles of the heater.  Wallas Blower Lids: The new blower lids for 1200D and 600D stoves offer a cost-effective and space-saving solution for interior heating with a 2-in-1 design. In addition to the new design and more compact size, heating efficiency has been increased. The stove can also be installed as a recessed unit, with the blower lid surface level with the countertop, creating a stylish and seamless integration in the kitchen. Heating is controlled by adjusting the thermostat, and cooking power is regulated on a scale of 1–6, just like at home. Safire boat heaters have a legendary reputation as a reliable and quiet heat source. The heaters feature redesigned control electronics that allow remote operation with the new Safire 1287B remote controller.  The Safire cera22 diesel stove boils a litre of cold water in 11 minutes. This stove completes the entire range so that the boat can dispense with the use of gas altogether – the boat’s own diesel fuel is used as fuel. The ceramic hob without open flame is safe and easy to use and the flue gases are safely discharged.  The boat heater range extends from the exceptionally quiet and small 0.7–1.6Kw Safire 16Di for small HT and cabin boats and small sailboats to 0.9–3.9 kW Safire 39Di he most powerful heater in the Safire range, which is comfortable enough to heat even large boats up to 13 metres in size. 

    • Wallas heaters controls
  • Discover boating industry innovations at METSTRADE 2024: Brand ID's Smartdeck™ is the new generation solution of boat deckings. The durable decking material is made of a lightweight closed cell foam, that is cost-effective, quick and easy to install and effortless to maintain. The material offers endless possibilities for customisation. As far as aesthetics go anything is possible, from the traditional teak look to innovative patterns. At the METSTRADE Brand ID announces a range of new, advanced product upgrades designed to enhance both convenience and functionality for boat owners. These upgrades include cutting-edge adhesion solutions, integrated lighting, and even heating and self-cleaning options. Each new feature is thoughtfully crafted to bring unparalleled versatility and style to #Smartdeck’s renowned decking solutions. New Smartdeck innovations include the ultimate reusable adhesion solution OCTOPUS, effortless magnetic affixation for steel surfaces, integrated LED strips for seamless illumination, self-Illuminating GLOW decking, integrated floor heating and purpose-designed WOSH cleaning agent.

    • Brand ID Smartdeck
  • Discover boating industry innovations at METSTRADE 2024: Nextfour Group's mission is to make boating accessible for everyone by making the technology easy. The Nextfour Q Multifunction Display is configured to be a white-label product, which allows boat manufacturers to integrate their own branding directly in the user interface. The Q Digital Switch adds the ability to control up to 40 devices directly on the display. The Q Display is complemented by its mobile user interface, Q App. Q App also enables the use of numerous functions enabled by Q Display, such as the Q Guard function and advanced statistics. The Q Display API not only lets the boat manufacturer create their own custom applications for the Q Display, but also gives you full access to all the data in the display. Fleety, the all-in-one web-based platform to manage and gather data, not only offers fleet management capabilities for boat rental companies but also allows boat builders to collect user data from their boats on the field. This creates a completely new way of interacting with and understanding the boaters. 

    • The Q Experience Multifunction Displays
  • Discover boating industry innovations at METSTRADE 2024: VA-Varuste Ltd is the leading manufacturer of fitted boat textiles in the whole of Europe which serves all significant boat builders in the Nordic countries and in Europe. Main products are boat canopies, harbour covers, boat cushions and seats. Boat textiles represent peak expertise in the field both in relation to quality and practical use. The functionality, appearance and durability are the key factors in designing new products. VA-Varuste uses 3D programs by which they can model a wide variety of alternatives without having to prepare a prototype of products. The factories are located in Finland, Poland and in Portugal.

    • VA-varuste canopies
  • Discover boating industry innovations at METSTRADE 2024: Toppi Oy is a plastic extrusion company manufacturing high-performance plastic profiles, designed exclusively for the marine industry. The products are tailored to exact specifications with superior weather, impact, and UV resistance. In collaboration with the raw material manufacturer, Toppi developed and improved the marine grade material even further. This enhanced formulation meets high UV radiation standards, ensuring exceptional durability for the marine profiles. The superior UV protection preserves both the visual and structural integrity of the products, significantly extending their lifespan.

    • Toppi plastic profiles
  • Discover boating industry innovations at METSTRADE 2024: Mesitek Marine specializes in offering the finest decking and interior parts combining durability, aesthetics, and ease of installation, ensuring a smooth manufacturing process. Mesitek offers Scandinavian craftsmanship, long-lasting partnerships and products built to last. • Compact laminate is composed of layers of saturated paper and resin, resulting in exceptional durability. Available in various decors and thicknesses, it is commonly used for decking, engine room covers, hatches, and instrument panels. Compact laminate is fully moisture resistant. • Warmotech waterproof panels are generated from surplus materials of the PU insulation production and PU coated to highly durable, moisture resistant interior panels, that can be processed using standard woodworking tools. • Honeycomb panels are naturally lightweight and durable, self-supporting, corrosion resistant and fire safe. Material is ideal for the supporting structures of weight-restricted applications and for module structures.

    • Mesitec Compact Laminate
    • Mesitek Warmotech waterproof panels

Samankaltaisia sivuja