MySQL 8.4 Release Notes
The following procedure shows how to configure MySQL to permit IPv6 connections by remote clients. It is similar to the preceding procedure for local clients, but the server and client hosts are distinct and each has its own nonlocal IPv6 address. The example uses these addresses:
Server host: 2001:db8:0:f101::1
Client host: 2001:db8:0:f101::2These addresses are chosen from the nonroutable address range recommended by IANA for documentation purposes and suffice for testing on your local network. To accept IPv6 connections from clients outside the local network, the server host must have a public address. If your network provider assigns you an IPv6 address, you can use that. Otherwise, another way to obtain an address is to use an IPv6 broker; see Section 7.1.13.5, “Obtaining an IPv6 Address from a Broker”.
Start the MySQL server with an appropriate
bind_addresssetting to permit it to accept IPv6 connections. For example, put the following lines in the server option file and restart the server:[mysqld] bind_address = *Specifying * (or
::) as the value forbind_addresspermits both IPv4 and IPv6 connections on all server host IPv4 and IPv6 interfaces. If you want to bind the server to a specific list of addresses, you can do this by specifying a comma-separated list of values forbind_address. This example specifies an IPv4 address as well as the required server host IPv6 address:[mysqld] bind_address = 198.51.100.20,2001:db8:0:f101::1For more information, see the
bind_addressdescription in Section 7.1.8, “Server System Variables”.On the server host (
2001:db8:0:f101::1), create an account for a user who can connect from the client host (2001:db8:0:f101::2):mysql> CREATE USER 'remoteipv6user'@'2001:db8:0:f101::2' IDENTIFIED BY 'remoteipv6pass';On the client host (
2001:db8:0:f101::2), invoke the mysql client to connect to the server using the new account:$> mysql -h 2001:db8:0:f101::1 -u remoteipv6user -premoteipv6passTry some simple statements that show connection information:
mysql> STATUS ... Connection: 2001:db8:0:f101::1 via TCP/IP ... mysql> SELECT CURRENT_USER(), @@bind_address; +-----------------------------------+----------------+ | CURRENT_USER() | @@bind_address | +-----------------------------------+----------------+ | remoteipv6user@2001:db8:0:f101::2 | :: | +-----------------------------------+----------------+