Convryor Belt

SEMINAR
ON
Ergonomic Considerations for
Designing and Selecting Conveyor
Belt Systems
Ergonomic Considerations for Designing and Selecting
Conveyor Belt Systems
Background:
Conveyor belts are used in many
industries to transport goods and
materials between stages of a
process.
Conveyor systems is a good way
to reduce the risks of
musculoskeletal injury in tasks or
processes that involve manual
handling.
If they are not properly designed
conveyor belt workstations can
contribute to the development of
musculoskeletal disorders
(MSDs).
Background:
MSDs can develop when workers
adopt awkward and
uncomfortable postures for long
periods while working.
Leaning, stooping, twisting, and
reaching are all examples of
postures that can lead to
musculoskeletal injury.
Background:
The design of some conveyor
systems can produce these postures:
By having the belt positioned too low or
too high for the operator,
By being too wide, the operator has to
reach excessively to pick objects from
the belt,
By not having adequate clearance for
feet at floor level, the operator has to
lean forwards to work, and
By having features such as sills can
obstruct the operators access to the
belt.
Considerations:
Conveyor systems are designed to transport a certain volume
of material in bulk per hour,
For a manufacturing process where each object on the belt is
handled sequentially.
The amount of material transported on the conveyor, its size,
and the amount of work performed on it influences the width
of the belt.
Considerations:
The height of the material, and how it is to be handled or
processed influences the height of the belt.
The height of the hands while working influences comfort and
risk of musculoskeletal injury.
Organisational issues can also influence the incidence and
development of MSDs.
Terminology:
Work surface height is the height of the conveyor belt from
floor level
Reach distance is the distance in front of and to the side of the
body over which the operator has to reach to perform the task
Working height is the height at which the hands are normally
held to perform work on objects on the conveyor
Common reference points used in HSE guidance and
Ergonomics literature are shown below:
These heights differ considerably between individuals in the

working population, and because of this, one fixed work surface
height cannot be completely suitable for everyone.
Work Surface Height:
The work surface height must be set at an appropriate fixed
height for the operators according to the size and weight of the
material carried on it.
Set a work surface height to accommodate taller members of
the working population, and provide adjustable platforms for
shorter operators.
Work surface height changes with different task requirements.
Light, higher precision tasks performed on smaller objects
require higher surface.
Heavier tasks performed on larger objects require a lower work
surface.
Working whilst seated helps to
prevent the fatigue that can
contribute to musculoskeletal
injury.
Seated working is best suited
to low-force tasks
Strength capability while
seated is lower than when
standing.
Note: *ISO 14738 (2002) Anthropometric
requirements for the design of
workstations at machinery.
For a comfortable work surface height at a seated workstation
offer adequate thigh clearance beneath the conveyor belt.
The conveyor mechanism must be made as thin as possible.
A minimum leg height clearance under the conveyor of
720mm, the height of the conveyor mechanism would need to
be within 60mm to not exceed a work surface height of
780mm.
The image below shows a conveyor with a thickness of 35mm.
Reach distance:
Zones of repetitive reaching on the
conveyor should lie within 450mm of the
front of the operators body.
Width of the belt should not exceed the
450mm guideline if it is used by a single
operator as shown.
If the objects being transported are
consistently large and take up most of the
space on the conveyor belt, the zone of
repetitive reaching might not extend to
the far area of the conveyor because the
objects can be grasped at mid depth.
Reach distance:
Where operators work on both sides of
the conveyor, the width of the belt should
be such that the central portion of the
conveyor is within the 450mm acceptable
zone of repetitive reach from operators at
either side.
The overall width of such a conveyor table
is limited to 900mm.
Reach distance:
A removable guide placed in the centre of the conveyor can
bring reach distances within the guideline limit if the operation
shifts from operators working on each side of the conveyor to
temporary single-sided working, as shown below.
Foot and leg clearance :
Providing adequate
clearance at the base of the
conveyor for the operators
feet allows them to stand
closer to the objects on the
belt.
This prevents strain on the
muscles of the back and neck
from holding a stooping
posture whilst working.
Note: ISO 14738* gives foot clearance
data for standing workstations
Foot and leg clearance :
Providing adequate space for the legs and feet to move around
underneath the conveyor helps to prevent operators from
adopting awkward forward leaning postures.
Adjustable footstools up
to 165mm* high may be
necessary to provide
adequate support for the
feet where operators need
to raise their seat to
achieve a comfortable
work surface height at the
conveyor.
Sills:
High sills are found on some
conveyors and inclined
conveyor systems to keep
material from falling off the
sides of the belt.
Working at conveyors with
high sills can force operators
to lean over the sill to handle
objects on the belt.
Sills:
Working for an extended period in this posture places strain on
the postural muscles of the back and the muscles in the neck to
hold the trunk and head forwards whilst the arms reach out in
front of the body to grasp objects on the belt.
Reducing the height of sills at workstation sites along the
conveyor can help to reduce this problem.
Rounded-over edges will make occasional leaning against the
conveyor to relieve the legs more comfortable.

Convryor Belt

Uploaded by

Copyright:

Available Formats

Convryor Belt

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Convryor Belt

Uploaded by

Copyright:

Available Formats

SEMINAR

These heights differ considerably between individuals in the

You might also like