FPRA Flexi Power Rectifier
FPRA Flexi Power Rectifier
FPRA Flexi Power Rectifier
Marko P. Komulainen
November 1st, 2009
products
3U high chassis build up from IP54 building blocks (rectifier and controller)
Final IP55 protection achieved with front and rear covers (same covers as used
with FlexiBTS)
Same FPRA unit used both indoor and outdoor environments
Indoor and any outdoor cabinet installations without front/rear covers
Outdoor stand alone installations (wall/pole/stack) with front/rear covers mounted
Back to Front airflow like on FlexiBTS modules
FPRA is
common solution for any existing or new BTS platforms
equal to Flexi BTS module in terms of dimensions and weight supporting Flexi
platform modularity
Same fixing points, same mounting options
Overview contd
FPRA has no air filters => reduced maintenance needs => lower OPEX
Output power scaleable from 2kW to 6kW (3 x 2kW)
No space for batteries inside the FPRA
Fan cooled rectifier modules
Fan unit at rear of the each rectifier module
Wide operating voltage range
90310VAC
Wide operating temperature range
-33+50C, temporarily up to +55C
Limited DC-distribution
2x63A breakers for BTSs
3x63A breakers for battery connections
FPRA has 6 user configurable external alarm (EAC) outputs and one alarm input
Up to three FPRAs can be chained to increase power on need basis
Chaining cable is part of every FPRA delivery
Controller
Module
Module front
90150VAC
150180VAC
180310VAC
DC-distribution
- 2 x 63A for BTSs
- 3 x 63A for batteries
FPRA Applications
(Floor/wall/stack)
Stack installation
UltraSite ID cabinet
FCSA
(roof mounting)
Flexi ID cabinet
Thank You !