Scribd Logo
Upload

Welcome to Scribd!

  • 288 views

    Singla PPT On Mpfi

    Uploaded by

    Rohit Singla
    MPFI (Multi Point Fuel Injection) system injects fuel into individual cylinders based on commands from the engine control module (ECM). It has four main components: the air intake system, fuel delivery system, electronic control system, and emission control system. The ECM controls fuel injection timing and other systems based on input from various sensors like the manifold pressure sensor, throttle position sensor, intake air temperature sensor, and oxygen sensor. MPFI provides more accurate fuel delivery, faster acceleration response, lower emissions, and improved fuel efficiency compared to carbureted systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd

    Singla PPT On Mpfi

    Uploaded by

    Rohit Singla
    288 views19 pages
    MPFI (Multi Point Fuel Injection) system injects fuel into individual cylinders based on commands from the engine control module (ECM). It has four main components: the air intake system, fuel delivery system, electronic control system, and emission control system. The ECM controls fuel injection timing and other systems based on input from various sensors like the manifold pressure sensor, throttle position sensor, intake air temperature sensor, and oxygen sensor. MPFI provides more accurate fuel delivery, faster acceleration response, lower emissions, and improved fuel efficiency compared to carbureted systems.

    Original Description:

    multipoint fuel injection system

    Original Title

    Singla Ppt on Mpfi

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MPFI (Multi Point Fuel Injection) system injects fuel into individual cylinders based on commands from the engine control module (ECM). It has four main components: the air intake system, fuel delivery system, electronic control system, and emission control system. The ECM controls fuel injection timing and other systems based on input from various sensors like the manifold pressure sensor, throttle position sensor, intake air temperature sensor, and oxygen sensor. MPFI provides more accurate fuel delivery, faster acceleration response, lower emissions, and improved fuel efficiency compared to carbureted systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    288 views19 pages

    Singla PPT On Mpfi

    Uploaded by

    Rohit Singla
    MPFI (Multi Point Fuel Injection) system injects fuel into individual cylinders based on commands from the engine control module (ECM). It has four main components: the air intake system, fuel delivery system, electronic control system, and emission control system. The ECM controls fuel injection timing and other systems based on input from various sensors like the manifold pressure sensor, throttle position sensor, intake air temperature sensor, and oxygen sensor. MPFI provides more accurate fuel delivery, faster acceleration response, lower emissions, and improved fuel efficiency compared to carbureted systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    of 19

    MPFI

    (Multi Point Fuel Injection)

    Done By Er.Rohit Singla R0ll no: 2306643

    Introduction
    In petrol vehicles carburetor is used for supplying air fuel mixture to the cylinder In response to the recent demand for cleaner exhaust emission improved drivability and mileage carburetor is not sufficient In place of the carburetor MPFI system is used in vehicles MPFI system is injects fuel into individual cylinders based on commands from engine control module The MPFI gives higher output, faster throttle response under varying driving conditions

    Components of MPFI
    1. 2. 3. 4. The system has four major components they are Air intake system Fuel delivery system Electronic control system Emission control system Air intake system It includes air filter, throttle body, intake manifold, and finally drawn into the combustion chamber

    Air intake system


    Throttle body It consist of throttle valve, T P sensor, which detect the throttle valve opening Idle air control valve which supplies bypass air depending on the engine condition

    Fuel delivery system


    It includes fuel pump, fuel filter and injector Fuel pump ECM controls its operation and centrifugal pump is used to pump the fuel The fuel pump also has a check valve to keep some pressure in fuel feed line even when fuel pump is stopped

    Pressure regulator system


    It keep the fuel pressure applied to the injector 2.9kg/cm^2

    Injector
    Each cylinder have one injector It inject the fuel into the inlet manifold according to the signal from ECM

    Electronic control system


    The electronic control system consist of various sensors which detect the state of engine and driving conditions

    Control systems are,


    Fuel injection control system In which ECM controls the timing of fuel injection according to the signals from various sensors Injection time is calculated on the basis of engine speed Idle speed control system It keep the engine idle speed as specified at all times

    Fuel pump control system ECM controls the ON\OFF operation of the fuel pump Ignition control system This system controls ignition timing The ECM judges the engine conditions by using signals from various sensors selects suitable ignition timing Controls of this system includes Ignition timing at the engine start Ignition timing after engine start

    Radiator fan control system


    Radiator fan motor is turned ON and OFF by using relays Radiator fan motor turned ON at below 98degree Celsius and OFF at below93degree Celsius

    Engine Control Module


    It consist of micro computer, analogue\digital converter It controls fuel injector, IAC valve, fuel pump relay .etc

    Working

    Functional division of MPFI

    On-board diagnostic system


    ECM diagnosis troubles which may occur in the engine when ignition switch is ON and the engine is running, it indicates trouble to the driver by flashing malfunction indication lamp And it stores the data about the trouble in ECM back up memory

    Emission control system


    It includes evaporative canister

    Evaporative emission control system


    This is used to prevent emission of fuel vapour

    Sensors used in MPFI


    Manifold absolute pressure sensor
    This sensor senses pressure change in the intake manifold The signals from the MAP is used by the ECM to control fuel injection pressure

    Throttle position sensor


    This is connected to throttle valve shaft on the throttle body and detects throttle valve opening

    Intake air temperature sensor


    It located on the air cleaner outlet hose and constantly measures the temperature of air entering to the intake manifold By sensing the temp. the ECM adjusts fuel injection quantity

    Engine coolant temperature sensor


    It is incorporated with coolant and measures the coolant temperature

    Oxygen sensor
    Oxygen sensor is installed on the exhaust manifold

    to detect the concentration of oxygen in the exhaust gases It is necessary to keep the air fuel ratio within a narrow range, and keep it in a stochiometric air fuel ratio

    Vehicle speed speed sensor The vehicle speed sensor is located on the transmission gear box or speedometer

    Cam shaft position sensor


    Using this signal ECM identifies cylinder whose piston is in the compression stroke

    Crank shaft position sensor ECM uses this signal for knowing the engine speed and cylinder identification

    Advantages of MPFI
    1) More uniform A/F mixture will be supplied to each cylinder; hence the difference in power developed in each cylinder is minimum. Vibration from the engine equipped with this system is less, due to this the life of engine components is improved.

    (2) No need to crank the engine twice or thrice in case of cold starting as happens in the carburetor system.
    (3) Immediate response, in case of sudden acceleration / deceleration.

    Advantages of MPFI
    Since the engine is controlled by ECM* (Engine Control Module), more accurate amount of A/F mixture will be supplied and as a result complete combustion will take place. This leads to effective utilization of fuel supplied and hence low emission level. (5) The mileage of the vehicle will be improved.

    Conclusion
    Almost all vehicles in India are changing to the MPFI because of law emissions, improved mileage and drivability Since the engine is controlled by micro computer more accurate amount of A/F mixture will be supplied and as a result complete combustion will take place. This leads to effective utilization of fuel supplied and hence low emission level. It reduces wastage of fuel by the use of sensors and other control systems

    You might also like