Paper Art - Yamaha Yzr m1 Us Assembly

Download as pdf or txt
Download as pdf or txt
You are on page 1of 14

Thank you for downloading the "YZR-M1 50th Anniversary US edition" paper craft model.

By simply following this manual while referring to the names and numbers shown on the parts sheets, you can assemble an authentic-looking replica of the YZR-M1 50th Anniversary US edition. Assembly instructions: Fourteen A4-sized sheets. Paper craft: Eighteen A4-sized sheets with 109 parts in all These instructions apply only to the "YZR-M1 50th Anniversary US edition." These Paper Craft parts are easier to work with when printed out onstrong, thick paper (like postcard stock).
In creating these Paper Craft models we use 110kg Kent paper stock
2005.7.7

To begin

Basic working method and markings

Tools and materials needed


-Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat). Solid lines

Items of Caution
*Take care when using sharp or pointed objects or when using bladed cutting tools. Place a heavy sheet of paper under the paper you want to cut. *Use glue and other adhesives only in well-ventilated areas. *When printing, use a slightly reduced font size. There may be differences in dimensions, depending on the type of printer used.

Fold along these lines. The printed surface should be on the outside of the folded shape.

Broken lines

Fold along these lines. The printed surface should be on the inside of the folded shape.

How to assemble

Dotted line

Cut along these lines.

*Follow the working method and markings carefully. *Cut carefully along the outter line with cutting blade, Exacto-knife or scissors.

One - point Advice


*Cut carefully with cutting blade, Exacto-knife or scissors. *For folding parts, first use an awl or other pointed tool to make a light crease along the dotted or solid line. This will make the folds straight. Avoid making strong creases, as this will cause the paper to tear. *As an adhesive, white wood glue is recommended. Avoid over application as this may cause the paper to wrinkle. *Before beginning assembly, test adhesive amounts on extra paper. *Occasionally, white spots will be apparent on folds and cuts. Use a marker or pencil to fill in these spots. It is recommended that this be done after each stage of assembly because coloring becomes more difficult once parts are assembled.

Do not fold or cut the parts marked .

Cut out parts marked with an asterisk(*).

Red dots are the reference positions for gluing surfaces.

1 Assembling the Front Cowl


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Front Cowl
Sheet A, 3 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

A-2

A-1

A-3

Reference photo

A-2

2 Assembling the Steering


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Steering
Sheet B, 16 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces. B-1 B-2 [ Upper Steering Column ] B-3 B-11 B-6 B-10 B-7 *DO NOT glue the upper and the lower parts of the steering column at this stage. B-5 B-8 B-14 B-13 B-4

B-9 [ Lower Steering Column ]

B-16 B-15

Reference photo

B-12

3 Assembling the Fuel Tank & Exhaust Pipes


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Fuel Tank
Sheet C, 2 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

C-2

Reference photo

C-1

Exhaust Pipes
Sheet D, 6 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

D-4 D-6 D-1

D-5

D-3

Reference photo

D-2

4 Assembling the Rear Fender


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Rear Fender
Sheet E, 14 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

E-11

E-2

E-12 E-10 E-3 E-4

E-5

E-1

E-13

E-6 E-7 E-14

Reference photo
E-9 E-8

5 Assembling the Under Cowl


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Under Cowl
Sheet F, 10 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces. F-5

F-2

F-3

F-4 F-8 F-7 F-9 F-10

F-6 F-1

Reference photo

6 Assembling the Frame


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Frame
Sheet G, 21 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

G-1

G-2 G-13 G-4 G-6 G-8

G-15 G-17 G-14 G-16 G-11

G-10 G-9

G-7

G-5 G-12 G-20

G-18

G-3

G-21

G-19

Reference photo

7 Assembling the Rear Arm


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Rear Arm
Sheet H, 11 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

H-2

H-9 H-11 H-1 H-4 H-10

H-3 *Do not glue Parts H-3 to H-4 at this stage. H-8

H-7

H-6

H-5

Reference photo

8 Assembling the Front Tire


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Front Tire
Sheet I, 14 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

*Glue the completed front wheel to the assembled front tire.

I-12 Front Tire I-14

I-5

I-13

I-11 I-4

Front wheel

I-6

I-7 I-3 I-2 I-10

Reference photo

I-9 I-8 I-1

10

9 Assembling the Rear Tire


First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together. Indication of Working Methods

Fold or Curve

Glue

Rear Tire
Sheet J, 12 parts in total

Fold each relevant part according to the assembly symbols.


Please use the dots on each component as reference when gluing surfaces.

*Glue the completed rear wheel to the assembled rear tire.

J-10 Rear Tire J-12

J-3

J-11

J-9 J-2

J-4 Rear wheel J-5 J-1

Reference photo
J-8 J-6

J-7

11

10 Finish
Please use the dots on each component as reference when gluing surfaces. Upper Steering Column Frame Fuel Tank Rear Fender

Assembly Instructions
glue the assembled parts in numerical order

through 12 .

5
1 2 3 4 5 6 7 8 9
Glue the Rear Tire to the Rear Arm. Glue the Rear Arm to the Frame. Glue H-3 to H-4. Glue H-3 to the Frame. Glue the Rear Fender to the Fuel Tank. Glue the Fuel Tank to the Frame. Glue the Under Cowl to the Front Cowl. Glue the Under Cowl to the Frame. Glue the upper part of the Steering to the Frame.

Front Cowl

9
10

12

Exhaust Pipes

6 5
12

H-4

10

3 2 7 8 4 8
Rear Arm Rear Tire

10 Glue the lower part of the Steering to the upper part of the Steering and the Frame. 11 Glue the Front Tire to the lower part of the Steering.

Lower Steering Column

12 Finish by gluing the Exhaust to the Rear Arm and the Rear Fender.

H-3

11

Front Tire Under Cowl

12

11 Assembled Model and the List of Parts


Please refer to the photo below when attaching each component.

RIGHT

Rear Fender E-1 E-2 E-3 E-4 E-5 E-6 E-7 E-8 E-9 E-10 E-11 E-12 E-13 E-14

Fuel Tank C-1 C-2

Front Cowl A-1 A-2 A-3

FRONT

Exhaust Pipes D-1 D-2 D-3 D-4 D-5 D-6

Steering B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 B-9 B-11 B-16 B-12 B-13 B-14

Front Tire I-1 I-2 I-3 I-4 I-5 I-6 I-7 I-8 I-9 I-10 I-11 I-12 I-13 I-14

B-10 B-15

13

12 Assembled Model and the List of Parts


Please refer to the photo below when attaching each component.

LEFT
Frame G-1 G-2 G-3 G-4 G-5 G-6 G-7 G-8 G-9 G-11 G-16 G-21 G-12 G-17 G-13 G-18 G-14 G-19

REAR

G-10 G-15 G-20

Under Cowl F-1 F-2 F-3 F-4 F-5 F-6 F-7 F-8 F-9 F-10

Rear Arm H-1 H-2 H-3 H-4 H-5 H-6 H-7 H-8 H-9 H-10 H-11

Rear Tire J-1 J-2 J-3 J-4 J-5 J-6 J-7 J-8 J-9 J-10 J-11 J-12

14

You might also like