OPERATING LIMITS

Flow rates up to :
Head up to :
140 m3/h
240 m
MULTi-V
Max. discharge pressure : 16 & 25 bar
Max. suction pressure : 10 bar
Temperature range :
Max. ambient temperature :
– 15° à + 120°*C
+ 40°C
STAINLESS STEEL MULTISTAGE
DN of ports :
*depending on mechanical seal
25 à 100 VERTICAL PUMPS
In-Line series - 50 Hz

APPLICATIONS
240 Pumping of non-loaded clear liquids for the And incorporation in all modular systems.
housing.agricultural and industrial sectors :
- Water supply - Boosting Fluids pumped
- Sprinkling - Irrigation • 304 range: clear non-aggressive liquid
Hm
MULTi-V - High-pressure washing (drinking water, water with glycol)
- Fire protection • 316L range: aggressive liquids (sea water.
- Heating - Air conditioning demineralized water, chlorinated water, etc.).
- Water treatment (demineralization.filtering)
0 Qm3/h 140

ADVANTAGES
• Stainless steel hydraulic unit : anti-
corrosion safety and increased pump
lifetime.
• Oversized (lantern) bearing for longer
motor bearing life; eliminates axial and
other adjustments of moving parts.
• Tungsten carbide intermediate bearing
to control and eliminate vibration and
stabilize the rotor with a large number
of stages.
• Thick impeller sealing rings between
stages for insensitivity to thermal ex-
pansion and elimination of risk of seiz- • M ULTi-V PN16
ing up. oval flanges
• O ptimal reliability: high-efficiency
impeller profiles limit the number of
stages, the sizes of the shafts, and axial
thrusts.
• Standardized mechanical seal, can be
used up to +120°C without maintenance.
• Easy to install: In-Line ports.
• M ULTi-V PN25
MULTi-V 36C, 60C, 80, 100 “Victaulic” union

• Easy maintenance : Mechanical Cartridge

Seal available on all models. Allows the
fitter or the operator to replace the MS
without removing the pump
• Concept Spacer available on all models
≥11kW. Allows the fitter or the operator • M ULTi-V 1800 PN 25
to replace the MS without removing the All 316L stainless steel
pump or the motor. hydraulic parts

• Mechanical
­cartridge Seal • M ULTi-V 8000 / 100.00
PN 16 and PN 25

N.T. No 141-7/ENG. - Éd. 5/09-06

 MULTi-V

DESIGN MULTi-V CONSTRUCTION

• Hydraulic part
- Centrifugal.
- Multistage, from 2 to 24 stages.
- Vertical axis, suction and IN-LINE discharge
ports at bottom.
- Casing for PN 16 and PN 25.
- Bottom guide bearing above second stage
for 1 to 60 m3/h versions (above 1st stage
100% IEC standard motor
on 2- and 3-stage models).
- Shaft sealing by standardized mechanical
seal.
- H ydraulics and casing assembled by tie All stainless steel hydraulic
rods. part
Oversized bearing secured
• Motor housing allowing easy
- Standard ventilated. assembly of the motor
- W ith flange and shaft end as per IEC
standard.
- Link to pump by coupling with guards.
Rigid coupling
Rotation speed : 2900 and 1450 rpm with safety protector
Winding 4kW 3-ph : 230-400 V : T
> 4kW 3-ph : 400 V : T4 Filling plug – Draining valve
Frequency : 50 Hz (option 60 Hz)
Insulating category : 155 (F)
Protection index : IP 55
Standard mechanical seal :
silicon carbide/carbon
Caption : 4 pole motor
2 pole motor 304 or 316L
stainless steel impeller

STANDARD CONSTRUCTION
Tungsten carbide
Main part Material intermediate bearing
liquids non-aggressive aggressive
models all except 80/100
36C/60C Teflon impeller seal ring
Suc.- Discharge casing EN GJL 250 Inox 316L
cast iron steel cast iron steel
Motor support bearing EN GJL 250 cast iron steel
Priming/draining plug
Impellers 304 stainless steel 316L stainless steel
Stages (casings) 304 SS 316L SS
Outside jacket tube 304 SS 316L SS
Pump shaft 304 SS 316L SS PN16 ou PN25 Version
Intermediate bearing Carbure de Tungstène
Mechanical seal Carbure Si/Carbone
O-rings EPDM (120°) Viton (90°)
Plugs 316L SS 316L SS

NB: 316L stainless steel (X2Cr Ni Mo 17.12.2) is a re-

commended material which is highly resistant to corrosion.
Transport of clean, clear liquids, containing no fibre and little
NB : The pumps MULTi-V 36C, 60C, 80 and 100 are
sand/silica (maximum concentration 40g/m3).
all supplied with a cartridge mechanical seal
* AISI 304 stainless steel. The MULTi-V 80/100/36C/60C and with a spacer for models above 11kw.
models are fitted with an AISI 431 stainless steel pump shaft.


 MULTi-V

IDENTIFICATION
MULTI-V10004/2N-OGE-T/2/6/OEM/XX/B
Pump family Version index

Nominal flow in m3/hr (at 50 hz / 2 pole) Technical definition code

Number of impellers Original Equipement Manufacturer

/1 or /2 : number of machined impellers Nothing = 50 hz

out of the total impellers. 6 = 60 hz
Eg.: 8004/2, 2 machined impellers out of 4
Number of pole
N = Standardised motor if the same power
is available with a non-standardised motor M = Single-phase
T = Three-phase : 50Hz - 230/400V -
O = Oval flanges PN16 60Hz - 220 to 255 /
F = Round flanges PN25 380 to 440V
R = Vicataulic T4 = Three-phase : 50Hz - 400V -
60Hz - 380 to 440V
G = GJL-250 cast iron pump body nothing = no motor
+ 304 stainless steel hydraulic body
X = 316L stainless steel

E = O-rings: EPDM (KTW/WRAS)

V = O-rings: VITON

CONFIGURATION OF SERIES
SERIE max service pressure motor 50 Hz suction and discharge number of stages
2 pole 4 pole
16 bar • --- oval G1 2 à 14
MULTI-V 100 25 bar • --- round DN 25 2 à 24
16 bar • --- oval G1 2 à 12
MULTI-V 200 25 bar • --- round DN 25 2 à 20
25 bar • --- ”Victaulic” 11/4 2 à 20
16 bar • --- oval G11/4 2 à 12
MULTi-V 400 25 bar • --- round DN 32 2 à 19
16 bar --- • round DN 32 10-14-20
25 bar • --- ”Victaulic” 1”1/4 2 à 19
16 bar • --- oval G11/2 2 à 12
MULTi-V 800 25 bar • --- round DN 40 2 à 19
16 bar --- • round DN 40 10-14-20
25 bar • --- ”Victaulic” 2” 2 à 19
16 bar • --- oval G2 2 à 11
MULTi-V 1600 25 bar • --- round DN 50 2 à 11
16 bar --- • round DN 50 6-9-12
16 bar • --- round DN 50 (Ø65) 2à8
MULTi-V 1800 25 bar • --- round DN 50 (Ø65) 2 à 14
16 bar --- • round DN 50 (Ø65) 9-12-16
16 bar • --- round DN 65 (Ø80) 2à7
MULTi-V 3600 25 bar • --- round DN 65 (Ø80) 2 à 12
16 bar --- • round DN 65 (Ø80) 7-10-12
16 bar • --- round DN 80 (Ø80) 2à7
MULTi-V 6000 25 bar • --- round DN 80 (Ø80) 3à9
16 bar --- • round DN 80 (Ø80) 5à9
MULTi-V 8000 16 bar • --- round DN 100 (Ø100) 1à5
25 bar • --- round DN 100 (Ø100) 1à7
MULTi-V 100.00 16 bar • --- round DN 100 (Ø100) 1à4
25 bar • --- round DN 100 (Ø100) 1à5

 MULTi-V

SECTIONAL VIEW - MULTi-V 1 - 2 - 4

MULTi-V 1/2/4
Part list 1/4
1” - PN16
1111 - Pump casing 8010 6546
1150 - Stage housing with return channel
1154 - Stage centering device 6545A 3011
1160 - Stage housing without return channel 9902A
1720 - Semelle de fixation pompe 9902D 9946A
• 2110 - Pump shaft 9902C 7212
• 2250 - Impeller 9946C 6521B 2110
9923B 4240
2410 - Impeller spacer 6571 6521A
2460 A - Shaft jacket spacer 4610A 6545B 4220
2460 C - Mechanical seal keeper ring 9946B 2520 4213
2460 D - Rondelle intermédiaire
2520 - Thrust ring 2410
9130
2911 - Bottom shaft end washer 4610B
• 3011 - Lantern ball bearing
3044 - Stage casing with intermediate bearing 1150 1154
3160 - Motor support bearing
• 3400 - Shaft jacket 2250
4213 - Stationary ring holder 1160 2460D
• 4220 - Rotary part | Mechanical 2460A
• 4240 - Stationary ring | seal 4610B 3044
• 4610 A - O-ring (filling plug)
• 4610 B - O-ring (outer jacket tube) 3400
• 4610 C - O-ring | (bouchon de vidange
• 4610 D - O-ring | et d’amorçage)
2460A
6515 - Drain and priming plug
6521 - Filling and venting plug
• 6545 A - Circlip (lantern bearing)
6545 B - Half keeper (thrust ring)
• 6546 - Circlip (lantern bearing)
6571 - Tirant d’assemblage
7212 - Coupling
05
7450 - Coupling guard
• 8010 - Flanged electric motor
9130 - Outer ealing jacket tube 1111 1720 9942 9902B
9902 A - Top shaft end screw
9902 B - Bottom shaft end screw
9902 C - Vis de fixation accouplement
MULTi-V 1/2
1"1/4 - PN25 VICTAULIC
9902 D - Vis de fixation moteur
9906 E - Motor fixing screw
9923 B - Ecrou de tirant d’assemblage
9923 E - Ecrou H. fixation moteur
9942 - Fan washer under screw 9902 B
9946 A - Washer under screw 9902 A
9946 B - Rondelle sous écrou 9923 B
9946 C - Washer under screw 9902 C

• Recommended spare parts.

MULTi-V 4 MULTi-V 1/2

DN32 - PN25 DN25 - PN25

 MULTi-V

HYDRAULIC PERFORMANCES - 2900 rPM

0 5 10 15 20 25 30 Q Imp.gpm
Hm H ft
210 419 MULTi-V
4m3 50hz
200

190 417
600
180

170

160 414
500
150

140 412
130
400
120
410
110

100

90 300
408
80 407

70 406

60 200
405
50
404
40
403
30 100
402
20

10
0
0
0 1 2 3 4 5 6 7 8 Q m /h9
3

0 20 40 60 80 100 120 Q l/h

0 0,5 1 1,5 2 Q l/min

η% 6
N.P.S.H (mCE)

40 4

20 N.P.S.H 2

0 0
0 1 2 3 4 5 6 7 8 Q m3/h9

P kW

0
0 1 2 3 4 5 6 7 8 Q m3/h
9

16
 MULTi-V

MULTi-V 400 ELECTRICAL DATA AND DIMENSIONS - 2 POLE

• PN 16 - DN G11/4 • PN 25 - DN 32 • PN 25 - «VICTAULIC» Union1”1/4
ØM ØM ØM

Purge
Purge Purge Ø G 3/8
Ø G 3/8 Ø G 3/8
H
H

H Vidange
Vidange
Vidange Ø G 3/8 h2
h Ø G 3/8 h DN�
Ø G 3/8
32 4 Ø 18
2 Ø 12
Ø 42,4
75 50
50
78
Rp� 20 171,6
157 20 20 171,6 100
G11/4
140 210
75 160 250
100 204
4 Ø 12 100 4 Ø 12
100 4 Ø 12 100
CBOV Ø G11/4 (PN16) Boîte
Livré avec CB,� à bornes
joints et boulons

180 212 180 212

180 212

X X
X

ORDER MOToR PuMP Weight

REFERENCE PN 16 PN 25 PN 25 PN 16 PN 25
In (A) G1 DN 25 Victaulic Motor Motor
P2 Flange 1x 3x 3x ØM X H h H h H h2 Without With Without With
kW Type 230 V 400 V 230 V mm mm mm mm mm mm mm mm Kg Kg Kg Kg
MULTi-V 402-M/2 0,55 14/FT85 3,55 1,3 2,25 150 123 537 297 562 322 – – 14,5 23 15,8 24,3
MULTi-V 402-T/2 0,55 14/FT85 3,55 1,3 2,25 150 123 543 297 567 322 535,5 296,5 22,5 23,8
MULTi-V 403-M/2 0,75 19/FT100 4,85 1,68 2,9 170 143 547 307 572 332 – – 15,5 26 16,8 27,3
MULTi-V 403-T/2 0,75 19/FT100 4,85 1,68 2,9 170 143 547 307 572 332 546,5 306,5 25,5 26,8
MULTi-V 404-M/2 1,1 19/FT100 6,65 2,4 4,2 170 143 571 331 596 356 – – 16,4 27,9 17,7 29,2
MULTi-V 404-T/2 1,1 19/FT100 6,65 2,4 4,2 170 143 571 331 596 356 570,5 330,5 27,4 28,7
MULTi-V 405-M/2 1,1 19/FT100 6,65 2,4 4,2 170 143 595 355 620 380 – – 17,4 28,9 18,7 30,2
MULTi-V 405-T/2 1,1 19/FT100 6,65 2,4 4,2 170 143 595 355 620 380 594,5 354,5 28,4 29,7
MULTi-V 406-M/2 1,5 24/FT115 9,1 3,2 5,5 190 148 641 389 666 414 – – 19 33,5 20,3 34,8
MULTi-V 406-T/2 1,5 24/FT115 9,1 3,2 5,5 190 148 669 389 694 414 688,5 388,5 33 34,3
MULTi-V 407-M/2 1,5 24/FT115 9,1 3,2 5,5 190 148 665 413 690 438 – – 20,1 35,5 22,3 36,8
MULTi-V 407-T/2 1,5 24/FT115 9,1 3,2 5,5 190 148 693 413 718 438 692,5 412,5 35 36,3
MULTi-V 408-T/2 1,85 24/FT115 – 3,9 6,75 190 148 717 437 742 462 716,5 436,5 20,5 35,5 23,8 36,8
MULTi-V 410-T/2 2,2 24/FT115 – 4,4 7,6 190 148 765 485 790 510 784,5 484,5 23 39 24,3 40,3
MULTi-V 412-T/2 3 28/FT130 – 6,3 10,6 213 158 863 543 888 568 862,5 542,5 25 46 26,3 47,3
MULTi-V 414-T/2 3 28/FT130 – 6,3 10,6 213 158 – – 936 615 910,5 590,5 – – 30 51
MULTi-V 417-T/2 3,7 28/FT130 – 7,8 13,5 213 158 – – 1013 688 988 682,5 – – 31 60
MULTi-V 419-T/2 4 28/FT130 – 8,4 14,5 240 170 – – 1136 760 1111 734,5 – – 32 54

32