RR KĀBEL LTD

Part No Part No For RR Kabel , Waghodia reference only RR01CL2X010150ASS

GURANTEED TECHNICAL PARTICULAR
Cable Type:- Aluminium Class 2 Conductor, XLPE Insulated, PVC ST 2 Sheathed ARM cable as per IS:7098 P-1
CABLE SIZE : 1C X 150 mm²
PARAMETER UOM SPECIFICATION
A. General Particulars
1 Make & Country - RR KABEL, INDIA
2 Type - A2XFₐY
3 Voltage Grade kV 1.1 / 1.5 (A.C / D.C)
4 Standard drum length with tolerance mtr 500 (± 5%)
5 Recommended minimum bending radius mm Cable diameter X 15
6 Maximum Safe pulling force when pulled by pulling eye Kg/mm2 3 kg/sq.mm of Aluminium area
Maximum Safe pulling force when pulled by stocking #
7
Refer foot note Kg/mm2 3 kg/sq.mm of Aluminium area

8 Approx Overall Diameter (± 2mm) mm 24.00

9 Suitable for -- Earthed & Un-earthed system
10 Packing material -- Wooden drum
B. Design & construction
1 Conductor
a Material - Aluminium H4/H2 Grade Conductor
b Type of Conductor - Class-2, Stranded Compact Conductor as per IS 8130
c Number of wire Nos 19
d Maximum conductor temperature for cont. use °C 90
e Maximum conductor temperature allowed for short circuit condition °C 250
2 Insulation over Conductor
a Material - XLPE
b Type - As per IS:7098 (P-1) Specification
c Thickness nominal mm 1.70
d Color of core for identification - Natural
e Volume Resistivity test
1 @ 27 °C Ώ-cm 1 X 10¹⁴ min
2 @ 90 °C Ώ-cm 1 X 10¹² min
f Before Aging test
1 Tensile Strength N / mm2 12.5 minimum
2 Elongation at break % 200 minimum
3 Lay - up
a Lay Direction Right Hand Direction
4 Inner Sheath
a Material NA
b Thickness Min mm NA
c Color of sheath NA
5 Armouring
a Armouring Material AL Strip
b Lay direction of Armouring mm Left Hand Direction
c Dimension of Wire/Strip 4.0 X 0.80 (± 10% Tolerance)
6 Outer Sheath
a Material PVC ST2 Compound as per IS:5831
b Thickness mm 1.40 Minimum
c Color of sheath Black
d Before Aging test
Tensile Strength 2
e N / mm 12.5 minimum
f Elongation at break % 150 minimum
7 Flammability Test
a Length of undecomposed portion from top clamp mm 50 minimum
b Period of burning after removal of flame sec. 60 maximum
8 Printing Message
a RR KABEL 1C X 150 SQ.MM 1100V A2XFₐY ELECTRIC CABLE IS 7098 P-1 CM/L 3781574 ISI (METER MARKING)
9 Electrical Properties
a High Voltage Test 3kV for 5 minutes
b Current Carrying Capacity
1 In Ground @ 30°C Amps. 265.00
2 In Duct @ 30°C Amps. 230.00
3 In Air @ 40°C Amps. 342.00
c Approx Capacitance µF/KM 0.6100
d Approx Reactance at 50 Hz Ώ/Km 0.0941
e Short Circuit Rating for 1 Sec K.Amps 26.4000
f Maximum conductor resistance at 20° C (D.C) Ώ/Km 0.2060
g Maximum conductor resistance at 90° C (A.C) Ώ/Km 0.3250
h Permissible Voltage Variation % ± 10
i Permissible Frequency Variation % ±5
j Combined Voltage & Frequency variation % ± 10

Prepared By: Dhairya Parmar RRKL W/ GTP IS 7098 /2016/ 11194

th
Valid From: 6 july 2016 Revision: 00
This is electronically generated sheet no signature is required

Note:- When using a stocking the same value apply but a stocking with correct diameter and length should be selected,such that all the tension is transferred to conductor this is evident when there in
no relative moment between the extruded layers and conductor at pulling end.