GEOMETRIC FORMULAS What is a Polygon?

A closed plane figure made up of several line segments that are joined together. The sides do not cross each other. Exactly two sides meet at every vertex. Types | Formulas | Parts | Special Polygons | Names

Types of Polygons
Regular - all angles are equal and all sides are the same length. Regular polygons are both equiangular and equilateral. Equiangular - all angles are equal. Equilateral - all sides are the same length. Convex - a straight line drawn through a convex polygon crosses at most two sides. Every interior angle is less than 180.

Concave - you can draw at least one straight line through a concave polygon that crosses more than two sides. At least one interior angle is more than 180.

Polygon Formulas
(N = # of sides and S = length from center to a corner) Area of a regular polygon = (1/2) N sin(360/N) S2 Sum of the interior angles of a polygon = (N - 2) x 180 The number of diagonals in a polygon = 1/2 N(N-3) The number of triangles (when you draw all the diagonals from one vertex) in a polygon = (N - 2)

Polygon Parts
Side - one of the line segments that make up the polygon. Vertex - point where two sides meet. Two or more of these points are called vertices. Diagonal - a line connecting two vertices that isn't a side. Interior Angle - Angle formed by two adjacent sides inside the polygon. Exterior Angle - Angle formed by two adjacent sides outside the polygon.

Special Polygons
Special Quadrilaterals - square, rhombus, parallelogram, rectangle, and the trapezoid. Special Triangles - right, equilateral, isosceles, scalene, acute, obtuse.

Polygon Names
Generally accepted names Sides Name n 3 4 5 6 7 8 10 N-gon Triangle Quadrilateral Pentagon Hexagon Heptagon Octagon Decagon

12

Dodecagon

Names for other polygons have been proposed. Sides Name 9 11 13 14 15 16 17 18 19 20 30 40 50 60 70 80 90 100 1,000 Nonagon, Enneagon Undecagon, Hendecagon Tridecagon, Triskaidecagon Tetradecagon, Tetrakaidecagon Pentadecagon, Pentakaidecagon Hexadecagon, Hexakaidecagon Heptadecagon, Heptakaidecagon Octadecagon, Octakaidecagon Enneadecagon, Enneakaidecagon Icosagon Triacontagon Tetracontagon Pentacontagon Hexacontagon Heptacontagon Octacontagon Enneacontagon Hectogon, Hecatontagon Chiliagon

10,000 Myriagon To construct a name, combine the prefix+suffix Sides 20 30 40 50 60 70 80 90 Prefix Icosikai... Triacontakai... Tetracontakai... Pentacontakai... Hexacontakai... Heptacontakai... Octacontakai... Enneacontakai... Sides +1 +2 +3 +4 +5 +6 +7 +8 +9 Suffix ...henagon ...digon ...trigon ...tetragon ...pentagon ...hexagon ...heptagon ...octagon ...enneagon

Examples: 46 sided polygon - Tetracontakaihexagon 28 sided polygon - Icosikaioctagon However, many people use the form n-gon, as in 46-gon, or 28-gon instead of these names.

Area Formulas

Note: "ab" means "a" multiplied by "b". "a2" means "a squared", which is the same as "a" times "a". Be careful!! Units count. Use the same units for all measurements. Examples

square = a

rectangle = ab

parallelogram = bh

trapezoid = h/2 (b1 + b2)

circle = pi r

ellipse = pi r1 r2

triangle =

one half times the base length times the height of the triangle

equilateral triangle =

triangle given SAS (two sides and the opposite angle) = (1/2) a b sin C triangle given a,b,c = [s(s-a)(s-b)(s-c)] when s = (a+b+c)/2 (Heron's formula) 2 regular polygon = (1/2) n sin(360/n) S when n = # of sides and S = length from center to a corner Units Area is measured in "square" units. The area of a figure is the number of squares required to cover it completely, like tiles on a floor. Area of a square = side times side. Since each side of a square is the same, it can simply be the length of one side squared. If a square has one side of 4 inches, the area would be 4 inches times 4 inches, or 16 square inches. (Square inches 2 can also be written in .) Be sure to use the same units for all measurements. You cannot multiply feet times inches, it doesn't make a square measurement. The area of a rectangle is the length on the side times the width. If the width is 4 inches and the length is 6 feet, what is the area? NOT CORRECT .... 4 times 6 = 24 2 CORRECT.... 4 inches is the same as 1/3 feet. Area is 1/3 feet times 6 feet = 2 square feet. (or 2 sq. ft., or 2 ft ).

pi = = 3.141592...)

Volume Formulas

Note: "ab" means "a" multiplied by "b". "a2" means "a squared", which is the same as "a" times "a". "b3" means "b cubed", which is the same as "b" times "b" times "b". Be careful!! Units count. Use the same units for all measurements. Examples

cube = a 3

rectangular prism = a b c

irregular prism = b h

cylinder = b h = pi r 2 h

pyramid = (1/3) b h

cone = (1/3) b h = 1/3 pi r 2 h

sphere = (4/3) pi r 3

ellipsoid = (4/3) pi r1 r2 r3 Units Volume is measured in "cubic" units. The volume of a figure is the number of cubes required to fill it completely, like blocks in a box. Volume of a cube = side times side times side. Since each side of a square is the same, it can simply be the length of one side cubed. If a square has one side of 4 inches, the volume would be 4 inches times 4 inches times 4 inches, or 64 cubic inches. (Cubic inches can also be written in3.) Be sure to use the same units for all measurements. You cannot multiply feet times inches times yards, it doesn't make a perfectly cubed measurement. The volume of a rectangular prism is the length on the side times the width times the height. If the width is 4 inches, the length is 1 foot and the height is 3 feet, what is the volume? NOT CORRECT .... 4 times 1 times 3 = 12 CORRECT.... 4 inches is the same as 1/3 feet. Volume is 1/3 feet times 1 foot times 3 feet = 1 cubic foot (or 1 cu. ft., or 1 ft3).

(pi = = 3.141592...)

Surface Area Formulas

In general, the surface area is the sum of all the areas of all the shapes that cover the surface of the object. Cube | Rectangular Prism | Prism | Sphere | Cylinder | Units
Note: "ab" means "a" multiplied by "b". "a " means "a squared", which is the same as "a" times "a". Be careful!! Units count. Use the same units for all measurements. Examples
2

Surface Area of a Cube = 6 a 2

(a is the length of the side of each edge of the cube) In words, the surface area of a cube is the area of the six squares that cover it. The area of one of them is a*a, or a 2 . Since these are all the same, you can multiply one of them by six, so the surface area of a cube is 6 times one of the sides squared. Surface Area of a Rectangular Prism = 2ab + 2bc + 2ac

(a, b, and c are the lengths of the 3 sides)

In words, the surface area of a rectangular prism is the area of the six rectangles that cover it. But we don't have to figure out all six because we know that the top and bottom are the same, the front and back are the same, and the left and right sides are the same. The area of the top and bottom (side lengths a and c) = a*c. Since there are two of them, you get 2ac. The front and back have side lengths of b and c. The area of one of them is b*c, and there are two of them, so the surface area of those two is 2bc. The left and right side have side lengths of a and b, so the surface area of one of them is a*b. Again, there are two of them, so their combined surface area is 2ab. Surface Area of Any Prism

(b is the shape of the ends) Surface Area = Lateral area + Area of two ends (Lateral area) = (perimeter of shape b) * L Surface Area = (perimeter of shape b) * L+ 2*(Area of shape b) Surface Area of a Sphere = 4 pi r 2

(r is radius of circle) Surface Area of a Cylinder = 2 pi r 2 + 2 pi r h

(h is the height of the cylinder, r is the radius of the top) Surface Area = Areas of top and bottom +Area of the side Surface Area = 2(Area of top) + (perimeter of top)* height Surface Area = 2(pi r 2) + (2 pi r)* h In words, the easiest way is to think of a can. The surface area is the areas of all the parts needed to cover the can. That's the top, the bottom, and the paper label that wraps around the middle. You can find the area of the top (or the bottom). That's the formula for area of a circle (pi r2). Since there is both a top and a bottom, that gets multiplied by two. The side is like the label of the can. If you peel it off and lay it flat it will be a rectangle. The area of a rectangle is the product of the two sides. One side is the height of the can, the other side is the perimeter of the circle, since the label wraps once around the can. So the area of the rectangle is (2 pi r)* h. Add those two parts together and you have the formula for the surface area of a cylinder. Surface Area = 2(pi r 2) + (2 pi r)* h

Tip! Don't forget the units. These equations will give you correct answers if you keep the units straight. For example - to find the surface area of a cube with sides of 5 inches, the equation is: Surface Area = 6*(5 inches)2 = 6*(25 square inches) = 150 sq. inches

Definition: A circle is the locus of all points equidistant from a central point.

a circle

Definitions Related to Circles

arc: a curved line that is part of the circumference of a circle chord: a line segment within a circle that touches 2 points on the circle. circumference: the distance around the circle. diameter: the longest distance from one end of a circle to the other. origin: the center of the circle pi ( ): A number, 3.141592..., equal to (the circumference) / (the diameter) of any circle. radius: distance from center of circle to any point on it. sector: is like a slice of pie (a circle wedge). tangent of circle: a line perpendicular to the radius that touches ONLY one point on the circle. Diameter = 2 x radius of circle

Circumference of Circle =
where PI = = 3.141592...

PI x diameter = 2 PI x radius

Area of Circle:
area = PI r2

Length of a Circular Arc: (with central angle

if the angle if the angle if the angle if the angle

) is in degrees, then length = x (PI/180) x r is in radians, then length = r x ) is in degrees, then area = ( /360)x PI r2 is in radians, then area = (( /(2PI))x PI r2

Area of Circle Sector: (with central angle

Equation of Circle: (Cartesian coordinates)

for a circle with center (j, k) and radius (r): (x-j)^2 + (y-k)^2 = r^2

Equation of Circle: (polar coordinates)

for a circle with center (0, 0): r( ) = radius for a circle with center with polar coordinates: (c, r2 - 2cr cos( - ) + c2 = a2 for a circle with origin (j, k) and radius r: x(t) = r cos(t) + j y(t) = r sin(t) + k ) and radius a:

Equation of a Circle: (parametric coordinates)

Perimeter Formulas
The perimeter of any polygon is the sum of the lengths of all the sides.
Note: "ab" means "a" multiplied by "b". "a2" means "a squared", which is the same as "a" times "a". Be careful!! Units count. Use the same units for all measurements. Examples

square = 4a

rectangle = 2a + 2b

triangle = a + b + c

circle = 2pi r circle = pi d (where d is the diameter) The perimeter of a circle is more commonly known as the circumference. Units Be sure to only add similar units. For example, you cannot add inches to feet. For example, if you need to find the perimeter of a rectangle with sides of 9 inches and 1 foot, you must first change to the same units. perimeter = 2 ( a + b) INCORRECT perimeter = 2(9 + 1) = 2*10 = 20 CORRECT perimeter = 2( 9 inches + 1 foot) = 2( 3/4 foot + 1 foot ) = 2(1 3/4 feet) = 3 1/2 feet