Manfrotto Catalogo 2005

Download as pdf or txt
Download as pdf or txt
You are on page 1of 48

SMOOTH, SHARP VIDEO AS YOU FOLLOW THE

ACTION!
To achieve maximum image sharpness, the camera must be mounted on a sturdy, "vibration free" tripod
equipped with a fluid head able to offer smooth pan and tilt movements. This will eliminate unstable camera
motion that could mar the recorded image.

This unwritten rule works for all professional, prosumer and consumer applications.

Manfrotto's video heads & tripods are supported by a varied list of accessories from monopods, dollies and
mid-level spreaders to bags, retractable all-terrain spikes and suction feet --- all to make your life easier, no
matter what and where you're filming. Manfrotto video supports --- Speed & precision as the ultimate challenge!

CONTENTS
Introduction 2-3
Video Heads 4-13
Remote Pan Bar Controller 14-19
Video Tripods 20-29
Spreaders, Dollies and Stabilizers 30-31
Bags and Straps 32-36
Accessories 37
Technical Guide 38-39
Video Kit 40-46
Index 47

KEY TO SYMBOLS

() • e '0
Closed
Length
Minimum
Height
Maximum
Height Height
• 0 0 0 0 0
Maximum Footprint
Diameter
Weight Maximum
Load
Head
Height
Plate
Supplied
Bowl
e" •
Suggested Suggested Suggested
Mid-Level Spreader Dolly
with Capacity with the Spreader
Extended Head
Center Column

03
WHY A FLUID HEAD?
Manfrotto's "pan & tilt movement" technology used for its complete range of semi-professional and professional
video heads is based on a system of cartridges filled with a specific "silicon fluid" .

This technology provides the smooth, constant movement needed to achieve "shake free" images while panning
and tilting during all types of video shooting sessions.

WHAT DO WE MEAN BY LOAD CAPACITY?


This is a technical specification that has sometimes been confused with the counterbalance load capacity of our heads.

The value we claim as the "load capacity" refers to the capability of the head locking brakes to hold the weight of the camera at any tilt or pan angles
needed to lock the camcorder in position .

WHAT DO WE MEAN BY
COUNTERBALANCE?
Counterbalance is achieved using a system of springs inside the head
which helps to keep the camera from rolling forwards or backwards
under its own weight when the video head is tilted . This system allows
the cameraman to achieve smoother tilt movements.

Manfrotto video heads are supplied with fixed or variable counterbalance


springs depending on the model. When fixed , the spring is set to a
specific counterbalance weight while when variable , the spring can be
adjusted in order to operate from a minimum to a maximum value.

MANFROTTO DRAG SYSTEM


Manfrotto drag technology provides accurate camera control in all conditions.

Depending on the model of the head, it is possible to choose between fixed and continuous adjustment.

The fixed drag provides a constant friction action . The continuous drag adjustment allows you to select the level of drag you need and to work the way
you choose, rather than having to select from predetermined levels as with stepped drag systems.

This solution enables you to set-up rapidly and repeatedly, helping you achieve perfect framing and control.

MANFROTTO INTERCHANGEABLE SLIDING PLATES


All Manfrotto heads are equipped with sliding and interchangeable camera plates.

The possibility to adjust the camera plate by sliding it allows you to balance the camera on the head and reduce to a minimum the effort required to tilt
it forward and backward. Plate sliding movement ensures that the camera load will be accurately balanced on the head.

The interchangeable mechanism lets you replace the camera with another one very quickly or, after removing it from the head, to hold it in your hands,
mount it on a monopod, a crane or a shoulder mount system by using the universal quick release mount adapter.

VIDEO HEADS
The following chart gives suggestions on how to combine our heads with your camcorder depending on the type/format of camcorder you use.

Digital camcorder models


DV
Micro DV OVcam
Format M ini DV Mini DV DVC Pro
DVD DI GI Beta
Betacam SP
Betacam SX

Number and
One 1/4" Three 1/3" Three 1/2" or 2/3"
Size ofCCD

Camcorder From 2.2 to 6.6 lb. From 4.4 to 17.6 lb. From 8. 8 to 23. 1 lb.
Weight Heads specifications
Counter Balance Head to Tripod
End User Presumer Professional Professional ENG Load Capacity in lb. in lb. Titt Range Type of Drag
Attach ment

700RC2 4.4 +90" _75" Fixed 3/8" female thread

701RC2 8.8 Fixed 3.3 +90" -60" Fixed 3/8" female thread

3433 +90 0 _60 0 Fixed plus variable 3/8" female thread


(501) 13.2 Teflon friction

3460
17.6 Fixed 5.5 +90" -60" Continuous variable 3/8" female thread
(503)

Variable
519 22 interchangeable +90" -90" Continuous variable 75 mm half bowl
from 2.2 to 19.8

516 22 Fixed 16.5 +900 _60 0 Continuous variable 3/8" female thread

316 35.3 Variable from Fixed 100 mm half bowl


14. 3 to 35.3 +70" -70"

04
Video heads

MINI VIDEO HEAD 700RC2


0000
3.8in 1.1 1b 5.51b 3157N

A compact and lightweight two-movement video head designed to support the latest digital video equipment
but also suited to still photographic cameras with medium and long tele lenses. The 700RC2 has a fixed length
pan bar with padded handle and separate locking mechanisms for the 360° pan and the +90°/-75° tilt. Smooth
and constant movements on both axes are assured by a fixed system of fluid cartridges.
Equipped with the 3157N quick release video plate system with VHS PIN and a secondary safety catch .
Head to tripod attachment is 3/8" female.

FEATURES

1 Tilt Locking Knob 3 Plate Safety Release Knob


2 Pan Locking Knob 4 Quick Release Plate

TECHNICAL SPECIFICATIONS
Tilt +90° -75°
Tilt Drag 1 fixed
Independent Tilt Lock Yes
Pan 360°
Pan Drag 1 fixed
Independent Pan Lock Yes
Flat Base 3/8 " female thread to mount on flat top tripod
Pan Handle 1
Quick Release Plate Supplied with : 1/4-20" camera screws
Temperature Range 14°F 140°F

06
Video heads

MINI VIDEO HEAD 701 RC2


0000
4in 1.81b 8.81b 3157N
Small and lightweight, this fluid video head is capable of accommodating a payload-Qf up to 8.8 Ib, and is
ideal for set-ups such as a fully equipped 3 CCD mini DV camcorder or a spotting scope combined with a
digital still or video camera for digiscoping purposes. The 701 RC2 is one of the most compact and lightweight
two-way heads found on the market and was designed to support the latest digital video equipment, including
Mini DV and the latest prosumer/professional compact HI DEFINITION camcorders. It is equipped with a fixed
3.3 Ib counterbalance spring and a sliding plate which can shift from + 15mm to -15mm to deliver a wide range
of balancing positions. Fluid drag on the 701 RC2 is fixed. The 701 RC2 has a fixed length pan bar with a soft
handle and separate locking mechanisms to the head to adjust in many positions. The sliding quick-release
video plate system is based on the 3157N equipped with the usual VHS pin.

FEATURES

FEATURES 4 Plate Release Lever 6 Sliding Top


1 Tilt Locking Knob 5 Quick Release Plate 7 Graduated Scale for Sliding Top
2 Pan Locking Knob 8 Sliding Top Knob To correctly position a camera on a video
3 Spirit Level head, it is important to know its balance point
(also known as center of gravity or "CoG").
All Manfratto video head counterbalance
systems take into consideration a camera
center of gravity of 125mm.

COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATIONS
Tilt +90° -60°
Tilt Drag 1 fixed
Independent Tilt Lock Yes
Pan 360°
Pan Drag 1 fixed
Independent Pan Lock Yes
Counterbalance Yes
Flat Base 3/8" female thread to mount on 75 mm ball or flat top tripod
Leveling Bubble Yes
Pan Handle 1
Quick Release Plate Supplied with: 1/4-20" camera screws
Temperature Range 4°F 140°F

Payload Ib
07
Video heads

PRO VIDEO HEAD 3433 (501)


0000
4.1in 3.31b 13.21b 3433PL
Designed to support the latest range of small, professional digital cameras as well as cameras with longer
lenses and spotting scopes, the 3433 (501) head gives best-in-the-market value and performance for payloads
up to an ample 13.2 lb. The light but positive fluid movement provides exceptionally smooth control through
360° pan and +90° to -60° tilt. It has added Teflon friction adjustment to increase drag, and separate pan and tilt
locks. Design practicality also features the 3433PL quick-release sliding plate with VHS pin, a single pan bar
and flat base with 3/ 8" tripod socket.

FEATURES

1 Pan Lock 4 Tilt Friction Knob 5 Tilt Lock Continuous drag friction control operated
2 Pan Friction Control 6 Sliding Plate Safety Release Button by a set of TEFLON disks.
3 Spirit Level 7 Sliding Quick Release Plate

TECHNICAL SPECIFICATIONS
Tilt +90°-60'
Tilt Drag 1 step plus variable Teflon friction
Independent Tilt Lock Yes
Pan 360°
Pan Drag 1 step plus variable Teflon friction
Independent Pan Lock Yes
Flat Base 3/S" female thread to mount on 75 mm flat top tripod
Pan Handle 1
Additional Pan Handle 3433HK (available as an option)
Optional Quick Release Plate 501PLONG
Sliding Quick Release Plate Supplied with: 3/S" and 1/4-20" camera screws
Sliding Travel of Plate 5S mm
Temperature Range 14°F 140' F

08
Video heads

PRO FLUID VIDEO HEAD 3460 (503)


0000
4.1in 3.51b 17.61b 3433PL
The 3460 is designed to support the latest professional digital video cameras. Particulflr care has been taken to
achieve the best fluid control, the smoothest possible pan and tilt movements and the most customizable
performance using a manually adjustable drag variation mechanism. Additionally, the 3460 is equipped with a
built-in balance spring (set for an ideal load of approx. 5.5 Ib) to maintain camera positioning during tilt
movements. The 3460 head has the best price/performance ratio of any fluid head on the market today.
Designed for payloads up to an ample 17.61b, its light but positive fluid movement provides exceptionally
smooth control, thanks also to its new fine-control drag device, which offers continuous adjustment from nearly
o drag to maximum. The 3460 has a quick-release sliding plate with VHS pin, a single telescopic pan handle
and flat base with 3/8" tripod socket.

FEATURES

1 Pan Lock 4 Tilt Friction Control 5 Sliding Plate Safety Release Button This technical drawing of the 3460
2 Pan Friction Control 6 Sliding Quick Release Plate video head points out two very
3 Spirit Level 7 Tilt Lock important features which make this
head quite different from the 3433:
a fixed counterbalance spring and the
variable continuous "fluid" drag friction
control mechanism.

COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATIONS
Tilt +900 -60°
Tilt Drag Continuously adjustable from 0 to max level
Independent Tilt Lock Yes
Pan 360°
Pan Drag Continuously adjustable from 0 to max level
Independent Pan Lock Yes
Balance control 1 fixed spring for 5.5 Ib camera weight
Flat Base 3/8" female thread to mount on 75 mm flat top tripod
Leveling Bubble Yes
Telescopic Pan Handle 1
Additional Pan Handle 3460HK (available as an option)
Optional Quick Release Plate 501PLONG
Sliding Quick Release Plate Supplied with: 3/8" and 1/4-20" camera screws
Sliding Travel of Plate 58 mm
Temperature Range 14°F 140°F
Payload Ib
09
Video heads

PRO FLUID VIDEO HEAD 516


(;)000
4.9in 4.4lb 221b 3272
Specifically designed for the latest DV camcorders used by documentary and industrial videographers the 516
head is very compact and light but can support cameras up to 22 lb . The 516 is a cost-effective high-
performance head equipped with fluid cartridges that provide continuous adjustable drag control. This system
gives a wide range of friction control down to "zero drag" and operates on both pan and tilt axis. Other important
features of the head are: separate tilt and pan locking mechanism ; a fixed counter balance spring of 16.5 Ib load
capacity at a center of gravity of 125mm; two telescopic pan handles; and a bubble level. The head has been
designed so it can be moun'ted on a flat base tripod with a 3/ 8" female thread attachment or by attaching the
ART 3141 BALL to the head base, allowing it to fit a 100mm bowl.

FEATURES

1 Pan Lock 4 Tilt Locking Lever 6 Sliding Plate Safety Release Button
2 Pan Friction 5 Tilt Friction 7 Sliding Quick Release Plate
3 Spirit Level

TECHNICAL SPECIFICATIONS COUNTERBALANCE GRAPH

Tilt +900 -60°


Tilt Drag Continuously adjustable from 0 to max level
Independent Tilt Lock Yes
Pan 360°
Pan Drag Continuously adjustable from 0 to max level
Independent Pan Lock Yes
Balance control 1 fi x spring for 16.5 Ib camera weight
Flat Base 3/ 8" female thread to mount on 75 mm ball or on flat top tripod
Leveling Bubble
Telescopic Pan Handle
~s ~
Optional Quick Release Plate 357PLONG ~
Sliding Quick Release Plate Supplied with: 2 x 3/ 8" camera screws and 2 x 1/4" camera screws '0
Sliding Travel of Plate 80mm -§,
Temperature Range WF 140°F :!

Payload Ib
10
Video heads

PRO FLUID VIDEO HEAD 519


00008
5.9in 6.4lb 221b 3433PL 75mm
It's a fact that not all cameras weigh the same. Some mini DV cameras may weigh only ~ Ib while professional grade DV
cameras can weigh up to 22 lb. Professionals have as many equipment options as they !"lo shooting styles, utilizing a
wide range of different cameras including MINI DV, DVCAM, HD, and ENG. When using numerous accessories, many of
these setups can quickly overload video heads above the maximum recommended weight. Understanding the problem
that professional videographers face, Manfrotto has developed the 519, a compact, yet heavy duty fluid video head
capable of accommodating a counterbalance payload from 3.31b up to 19.8 lb. This is a revolutionary breakthrough from
Manfrotto, as the 519 will be the only video head on the market encompassing both interchangeable and adjustable
counterbalance springs. Combining both features will allow videographers to easily interchange a vast array of cameras
of various weights as well as quickly fine tune the perfect balance point of whatever camera being used, all with just one
head! In addition, fluid drag is easily controlled with a large numbered knob in seven increments. Drag can be adjusted
from the highest possible setting to nearly zero drag, allowing for the finest control through 360 0 pan and +90 0 to -900
tilt. For camcorders with lots of extras, we recommend the 501 PLONG long plate. This plate will enable you to better
balance th ~ unillsual weight distribution of the camcorder on your head.
FEATURES

BALANCE SPRINGS
SUPPLIED WITH HEAD

1 Pan Locking Knob 4 Tilt Locking Knob 7 Sliding Quick Release Plate
2 Pan Drag Control 5 Tilt Drag Knob 8 Sliding Quick Release Knob
3 Spirit Level 6 Counterbalance Adjustment Knob 9 Sliding Plate Safety Release Button
10 Interchangeable Pan Bar Rosette Blue spring - minimum
Blue spring - MAXIMUM
Yellow sprin9 - minimum
Yellow spring - MAXIMUM

TECHNICAL SPECIFICATIONS COUNTERBALANCE GRAPH

Tilt +90' -90'


Tilt Drag Variable (7 steps)
Independent Tilt Lock Yes
Pan 360'
Pan Drag Variable (7 steps)
Independent Pan Lock Yes
Variable Balance Control Yes (Operated by two interchangeable and adjustable springs,
the blue one from 3.3 to 11 Ib and the yellow one from 11 to
19.8 Ib @ 125 mm CG and 60' from tilt inclination)
Head Bowl 75mm
Leveling Bubble Yes
Telescopic Pan Handle 1
Additional Pan Handle 519LV (available as an option)
Optional Quick Release Plate 501PLONG
Sliding Quick Release Plate Supplied with : 3/8" and 1/4-20" camera screws
Sliding Travel of Plate 58 mm
Temperature Range 4' F 140' F Payload Ib
11
Video heads

PRO FLUID VIDEO HEAD 3274 (316)


00008
5. 7in 10lb 13.2I35.3Ib 3272 100mm

The 3274 is designed for use with cameras weighing up to 35.3Ib. It incorporates variable balance adjustment
and fixed drag system that allows fingertip control at all times. Supplied with quick release sliding plate,
secondary safety lock and two telescopic pan bars.

FEATURES

.. 6
c

.
5
..
t.
" 'i
~
,.;<"

1 Tilt Lock 3 Balance Control 5 Sliding Quick Release Plate


2 Pan Lock 4 Spirit Level 6 Secondary Safety Button

minimum
MAXIMUM

COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATIONS
Tilt +70 0 -70 0
Tilt Drag 1 fixed
Independent Tilt Lock Yes
Pan 360 0
Pan Drag 1 fixed
Independent Pan Lock Yes
Variable Balance Control Yes
Head Bowl 100mm
Leveling Bubble Yes
Telescopic Pan Handles 2
Sliding Quick Release Plate Supplied with: 2 x 3/8" Camera screws
and 2 x 1/4-20" Camera screws
Optional Quick Release Plate 357PLONG
Sliding Travel of Plate 80mm
Temperature Range 14°F 140°F
Payload Ib
12
Video head accessories

Compatible plates Compatible quick release adapters


Range of additional plates for either fixed or sliding quick release Use to convert a non quick release camera platform into one of the three
assembly. quick release systems used on all Manfrotto video heads or convert a
variety of supports Gib arms, booms, monopods, brackets) compatible
with the same camera plate attachment.

COMPATIBLE PLATE 357PLONG PRO VIDEO QUICK RELEASE


This long version of the standard plate allows perfect balance for cam- ADAPTER 3273
corders with unusual weight distribution caused by long tele Compatible with the 3272 camera plate (supplied with the 516 and 3274
lenses or heavy batteries. The plate has a laser engraved scale to help (316) video heads) and the special 357PLONG accessory plate. This
identify and record optimal position. In order to free the maximum range quick release adapter gives you the freedom to remove the camera from
of possible balance positions, the VHS location pin is able to slide along the head and put it on any other support. Supplied with 2 x 1/ 4-20"
the length of the plate. Supplied with 2 x 1/4-20" and 2 x 3/8" camera and 2 x 3/8" camer.a screw. Sliding travel of plate: 3.15in
screws. Compatible with 516 and 3274 (316).

VIDEO QUICK RELEASE


ADAPTER 577
Compatible with the 3433PL camera plated (supplied with the 3433
(501),3460 (503) and 519 video heads) and the special501PLONG
accessory plate. This quick release adapter gives you the freedom to
COMPATIBLE PLATE 501 PLONG remove the camera from the head without detaching it from the plate
This long version of the standard plate allows perfect balance for cam- and put it on any other support. Supplied with 1/4-20" and 3/ 8" camera
corders with unusual weight distribution caused by long tele lenses or screws. Sliding travel of plate: 1.96in
heavy batteries. The plate has a laser engraved scale to help identify the
optimal position. In order to have the max range of balance positions,
the VHS location pin can be moved along the length of the plate.
Supplied with 2 x 1/4-20" and 2 x 3/8" camera fixing screws.
Compatible with 3433 (501), 3460 (503) and 519.

RECTANGULAR VIDEO QUICK RELEASE


ADAPTER 3299
Compatible with the 3157N camera plate (supplied with the 700RC2 and
701 RC2 video heads). This quick release adapter gives you the freedom
to remove the camera from the head without detaching it from the plate
Compatible additional pan bars and put it on any other support. Supplied with 1/4-20" camera screw.
Additional pan bars to be used as a second or replacement pan bar on
Manfrotto video heads.

PAN BAR 3433HK


Fixed two section pan bar for the 3433 video head.

PAN BAR 3460HK


Telescopic pan bar for the 3460 video head. Telescopic pan bar for the 519 video head.

13
14
Video remote control

Our video camera remote control units put the essential commands of market-leading video cameras from Sony, Canon and Panasonic at your
fingertips when using a tripod and video head, a jib arm or crane, or any other kind of camera support. The range is divided not only by camera
compatibllity (due to different use of device protocols by manufacturers, each model has to be designed around specific makes or models of camera) ,
but also by mounting type. The 523PRO has built-in video head pan bars making them most suitable for use in classic tripod/head setups. The 521
models are built onto clamps, enabling them to be used on tubes, pipes, table tops, steering wheels, handlebars, hang-gliders or even to be hand held
for ultimate freedom in control. Pan bar mounted versions offer the advantage of allowing you to operate both camera movement and many
recording/zoom controls with the same hand, letting you take care of creative decisions rather than having to worry about how to reach the camera
buttons, follow the subject and keep movements smooth all at the same time. Clamp versions reduce the number of buttons and controls to the bare
minimum, but where you use them is limited only by your imagination!
.

••• no PAF - no Push Auto Focus function

15
Video remote control

REMOTE CONTROL PRO FOR SONY/CANON 523PRO


The 523PRO remote control works with both Sony and Ganon LANG-enabled video cameras. The remote control features a record/stop button, a power
on/standby button, three different zoom speed control buttons (slow, medium and fast) and a push auto focus button. The zoom wheel can be used to control
one of the three preset, maximum zoom speeds or a customizable maximum speed which you can set to exactly the level you want. For all zoom speeds
except the slowest preset speed, you can choose between progressive zoom speed (the further you rotate the zoom wheel, the faster the zoom) or fixed
zoom speed (irrespective of the rotation applied to the wheel, zoom speed remains constant) by pressing the button once (progressive) or twice (fixed). The
LED shows you which speed you have selected. To set a "custom" zoom speed, simply hold the zoom speed button until the LED flashes and use the wheel
to set your speed. The setting remains in the unit's memory until you decide to change it. Whether you choose a limited progressive zoom range or a single
fixed speed, the features of the 523PRO mean you can easily repeat zooms precisely in subsequent takes of the same shot. The 523PRO also allows you to
set left- and right-handed operation by changing zoom wheel direction. The push auto focus button makes it very easy to achieve in focus images when
working in manual focus mode. You can also use the manual focus in and out buttons. 523PRO does not come
with any parts to fit to the head, but instead utilizes the pan bar clamp that comes with all Manfrotto heads.

The 523PRO is the only


semi-professional video remote
system available on the market
Telescopic pan bar allows you to
today that uses a professional-type
choose the most comfortable
zoom "wheel" for finer adjustment
working position
and smoother progressions

Zoom wheel direction can be


inverted (left - right or right :' left)

Only system with 2.5 sub mini


stereo jack connector rather than
built-in cable means the camera
cable can be easily substituted

Incorporation of the remote


control with the video head pan
bar ensures sturdiness and
eliminates mechanical problems.

COMMANDS

POWER ON/STANDBY
PUSH AUTO FOCUS
ZOOM SET SPEED 1
F=fixed zoom speed
P=progressive zoom speed
ZOOM PRESET SPEED 2
F=fixed zoom speed
P=progressive zoom speed
Custom progressive zoom speed
ZOOM PRESET SPEED 3 .
F=fixed zoom speed
P=progressive zoom speed
Custom progressive zoom speed
REC/STOP
FOCUS IN
FOCUS OUT
ZOOM WHEEL
16
Video remote control

REMOTE CONTROL FOR PANASONIC 522P


The 522P is a dual circuit, progressive zoom remote control unit for the Panasonic AG-DVC-30, AG-DVC80 and AG-DVX100A. It is built into a video head
pan bar t~at is suitable for Manfrotto models 3433, 3460, 516 and 3274. The dual circuit allows you to choose between a zero power consumption
"analog" mode for basic functions (record/ stop and progressive min-max zoom via a professional zoom wheel) and a 3 AA (1 .5 volt) battery-powered,
advanced, customizable, digital mode. The digital mode gives you the record/ stop function, and the zoom wheel. The zoom wheel can be used to control
one of three preset maximum zoom speeds or a customizable maximum speed which you can set to exactly the level you want. The "custom " zoom
speed setting remains in the unit's memory even when batteries run down, until you decide to change it. In addition, for all options except the slowest
preset speed, you can choose between progressive zoom speed (the further you rotate the zoom wheel, the faster the zoom) and fixed zoom speed
(irrespective of the rotation applied to the wheel, zoom speed remains constant) by pressing the button once (progressive) or twice (fixed) . An LED shows
you which speed you have selected. The 522P also allows you to set left- or right handed operation by-changing zoom wheel direction. The 522P does
not come with any parts to fit to the head, but instead utilizes the pan bar clamp that comes with all Manfrotto heads.

« ,
522P is mounted on a telescopic
Only control unit on the market video head pan bar for sturdy
that not only has the basic attachment, comfortable
"analog" mode, but also a full- positioning and fingertip control
featured "digital" mode with three
zoom speed presets, a fourth
"personal" speed setting , and
progressive or fixed zoom speeds

Professional zoom wheel gives


finer control over progressive
zoom speeds

Only system with 2.5 sub mini


stereo jack connector instead of
built-in cable, so it can easily be
substituted, lengthened or
shortened.

Zoom wheel
direction can be inverted
left - right or right - left

Incorporation of the remote


controller with the video head
pan bar ensures sturdy
attachment and eliminates
mechanical problems

Battery compartment located in


handle of pan bar. Batteries not
included
MINIMUM ZOOM SPEED
preset, fixed speed only
MEDIUM ZOOM SPEED
preset, fixed or progressive speed
MAXIMUM ZOOM SPEED
preset, fi xed speed only
DIGITAL MODE
Switch to digital mode for access
to advanced zoom function s
REC/STOP
ANALOG MODE
Switch back to analog mode to save
battery life
CUSTOM
Customizable zoom speed , fi xed or
progressive speed
ZOOM WHEEL
17
Video remote control
PRO REMOTE CONTROL FOR SONY & CANON 521 PRO
Designed for Sony and Canon Mini DV, and Hi8 cameras, the 521 PRO is a compact remote control that is built onto a small clamp to suit a wide range
of applications. The 521 PRO enables you to control power, recording, zoom and focus. Like the 523PRO, the 521 PRO features manual focus buttons
and an auto focus button, allowing you to achieve in-focus images easily when working in manual focus mode. It also has a progressive zoom speed
(the further you rotate the zoom wheel , the faster the zoom), a fixed zoom speed (irrespective of the rotation applied to the wheel , zoom speed remains
constant) , or a customizable maximum speed , which you can set to exactly the level you want. To set a "custom" zoom speed, simply hold the zoom
speed button until the LED flashes and use the wheel to record your speed. The LED shows you which speed you have selected.

BASIC REMOTE CONTROL FOR SONY & CANON 521


Like the 521 PRO, the 521 is a compact remote control that is built onto a small clamp for Sony and Canon Mini DVs, and Hi8 cameras . The 521 allows
you to control the most commonly used features of your camera: power on/off, record/stop, focus in/out and zoom through the professional zoom
wheel.

BASIC REMOTE CONTROL FOR PANASONIC 521 P


The 521 P is designed to work with Panasonic cameras AG-DVC-30 , AG-DVC80 and AG-DVX1 OOA, and enables you to control the record/ stop and
zoom in/ out functions of the camera.

JACK CONNECTOR CLAMP RANGE


2.5 mm sub mini jack instead of Square tube of flat surfaces:
built-in cable means you can O.19in - 1.18in height
easily change the length of the
camera cable for different set-up
requirements

ZOOM WHEEL
Professional zoom "wheel" for
finer adjustments and smoother
progressions

INVERTIBLE ZOOM DIRECTION CLAMP RANGE


(not 521 P) Zoom in/ out direction Rectangular tube of flat surfaces:
can be inverted (left to right, or O.19in - 1.18in height
right to left)

Only on 521 PRO: invertible focus


direction

CLAMP RANGE
Round tube/pipe/bar: OA7in
to 1.38in diameter

COMMANDS 521 COMMANDS 521P COMMANDS 521 PRO

POWER ON/OFF REC/STOP POWER ON/OFF


FOCUS IN ZOOM WHEEL FIXED, PROGRESSIVE AND
REC/STOP CUSTOMIZABLE ZOOM SPEEDS
FOCUS OUT REC/STOP
ZOOM WHEEL PUSH AUTO FOCUS
ZOOM WHEEL
FOCUS IN/OUT

18
Video remote control accessories
REMOTE PAN BAR ADAPTER
It seemed too much of a shame to keep this to ourselves, so we've also made available a pan bar adapter kit that connects the Manfrotto
remote control to video heads from other manufacturers:

SUPPLEMENTARY ADAPTER CODE BAR DIAMETER SUPPLEMENTARY;ADAPTER CODE BAR DIAMETER


FOR SONY AND CANON FOR PANASONIC
522PB 12 0.47in 522PB 12P 0.47in
522PB 13 0.51in 522PB 13P 0.51in
522PB 14 0.55in 522PB 14P 0.55in
522PB 16 0.62in 522PB 16P 0.62in
522PB 18 0.70in 522PB 18P 0.70in
522PB 22 0.86in 522PB 22P 0.86in
522PB 25 0.98in
522PB 30 1.18in

OPTIONAL CABLES
The following cables of different length are available as accessories:

REMOTE CONTROL CABLE RAIN COVER FOR


STANDARD 522SCA REMOTE CONTROL 523RC
2.5 sub mini male/male jack coiled cord cable measuring 9.8in Waterproof cover for Manfrotto remote control series 522 and 523
extendable to 19.7in supplied as standard with all the units. supplied with a crystal clear vinyl panel to allow to view the remote
control button during the shooting session. The cover slips quickly over
REMOT~ CONTROL CABLE the remote pan bar to protect it from rain or sudden showers.
EXTENSION 522EXTC
2.5 sub mini male/female jack and plug, straight cable, measuring 35.4in
in length can be fitted to all units.

REMOTE CONTROL CABLE


SUPER EXTENSION 522EXTC30
2.5 sub mini male/female jack and plug, straight cable, measuring
98 feet in length can be fitted to all units.

19
Video tripods

WHAT IS TORSIONAL RIGIDITY?


Maximum torsional rigidity is the first feature all videographers want from their video tripod.
A professional video tripod has to provide a rock solid base that is not sensitive to the mechanical stress induced by the tilt and pan movement.

Weight and the maximum/ minimum working height are other important factors which need to be taken in serious consideration when choosing your
video tripod.

Manfrotto has been the first manufacturer in the world that has created both the traditional twin leg design video tripod and a single leg tube concept,
which do not sacrifice the weight and working height of a tripod for its torsional rigidity performance. The MDEVE tripod and the traditional
photographic design ones offer the best tripod solution for the latest professional MINI DV and DV camcorder.

VI DEO TRIPOD LEG STRUCTURE & MATERIALS


Video tripods can be divided into two groups based on their leg types: those with single legs throughout, and those with twin parallel legs in the top
sections. Most tripods use circular profile tubes, while the MDEVE 755MF3 and 756MF3 use a three-faceted profile which helps to eliminate all
unwanted rotation . In the case of carbon fiber tripods the legs can be clamped into the tripod top crown rather than glued in.

VIDEO TRIPODS
In the chart we suggest how to combine our tripods with your camcorder depending on the different type/format of camcorder you use.

Digital camcorder models


DV
OV cam
DVC Pro
Micro DV <2 DIG I Beta
Format Mini DV Mini DV Betacam SP
DVD Betacam SX

Number and Size of CCO One 1/ 4" Three 1/3" Three 1/2" or 2/3"

Camcorder From 22 Over Tripod to Head


From 2.2 to 13.2 lb. From 15.4 to 33.1 lb. 44.11b Number of Stage Attachment
Material
Weight to 44.1 Ib

755MF3 x 2 3/8" Male thread Carbon

756MF3 x 2 3/8" Male thread Carbon

755B x 2 3/8" Male thread Aluminum

756B x 2 3/8" Male thread Aluminum

745B x 2 3/8" Male thread Aluminum

745MF3 x 2 3/8" Male thread Carbon

~ 1905SB x 2 3/8" Male thread Aluminum

3221WN x 2 3/ 8" Male thread Aluminum

~ 3068 x x 2 3/8" Male thread Aluminum

r; 528XB x 2 3/8" Male thread Aluminum

532ART x x x 2 75 mm+100 I bowl Aluminum

542ART x x x 2 75 mm+ 100 mm bowl Carbon

525MVB x x x 2 75 mm bowl Aluminum

515MVB x x 2 100 mm bowl Aluminum

3193 x x 1 100 mm bowl Aluminum

3185 x x 1 100 mm bowl Aluminum

3182 x x 1 75 mm bowl Aluminum

351 MVCF x x 1 75 mm bowl Carbon

20
Technical Features MDEVE TRIPODS
The much-heralded arrival of the digital era has brought with it a drastic reduction in weight and size of video camera equipment, matched by
enormous advances in the picture quality achievable with the most minuscule of systems.
Those working in the video sector are demanding camera supports that are tailored to these small new cameras but that make no compromises in key
areas such as rigidity which could jeopardize the fluidity and smoothness of camera movements. It is out of these demands that Manfrotto's MDeVe
series was born.
Aimed at the DV, Mini DV and Micro DV markets, this family of tripods provides high performance with an extremely compact and lightweight structure.
The series is made up of six tripods; three are entirely in aluminum and three have carbon fiber leg sections with magnesium castings.
All six are two-stage tripods and are supplied with quick release leg locking levers, asymmetric leg angle presets and, most significantly, our patent-
pending, rapid center column with built-in leveling half ball. The fact that the 50mm diameter ball with bubble spirit level is attached not to the tripod
top spider but to the top of the center column allows you to level the top plate (and consequently the head and camera) and even adjust the camera
height without needing to make micro adjustments to the tripod legs, representing timesaving and added convenience. Manfrotto MDeVe tripods -
avant-garde digital video camera support.

Tripod to head connection via


a 3/ 8" male thread, built-in spirit
level and three grub screws for
secure locking mountings.

Center column with built-in 50 mm


half ball locked using the Mounted on a built-in 50mm
rotating grip located at the half bowl leveling system
bottom of the center column . (on 7458 and 745MF3 tripods) .
Tilt range: +15°/-15°

Single tube leg profile made


- - - - - - - - - - - of round-section aluminum
or carbon fiber.

Quick action lever leg lock


system (45° run) .

Rubber feet
Four different leg angle settings.

Compatible accessory:

Model shown: 7558

LEVELING CENTER
COLUMN ANGLE BRACKET 553
This simple bracket enables you to work with the
center column in the horizontal position while keeping
the head parallel to the ground. Single tube Leg profile
made of round-section aluminum or carbon fiber.

22
Video tripods

MDEVE MAGFIBER VIDEO TRIPOD 756MF3


008800 8.81b
_ 8
3155
23.4in 21 .5in 46.9in 54.5in 41b 3127/3137

The 756MF3 is the most innovative tripod of the MDEVE series due to the combination of low weight (carbon fiber for the legs/magnesium die casting)
and high load capacity materials used for its construction. Its unique, patent-pending ; Iuminum center column construction and precision-machined
red anodized aluminum includes a built-in 50mm leveling ball system locked by a detachable rotating grip built at the bottom of the center column .
This allows the camera operator to level the camera and even adjust its height without needing to make micro adjustments to each individual tripod
leg. The castings of the 756MF3 are constructed of magnesium to reduce the weight. The crown design also allows the center column to be
horizontally mounted.

MDEVE MAGFIBER VIDEO TRIPOD 755MF3


008800 _ 8
26.6in 24.6in
.
54.7in 63.2in 4.61b 15.4lb 3127/3137 3155

Same design as the 756MF3 but with larger leg diameter, top spider and leg locks, enabling the 755MF3 to handle a higher load capacity.

MDEVE ALUMINUM VIDEO TRIPOD 756B


008800
23.2in 17.7in 48in 56.3in 4.91b 8.81b
_
3127/3137
8
3155

Professionals will love this extremely compact and light aluminum video tripod. The tripod has an easily removable center column provided with a
50mm leveling ball and spirit level that can be used horizontally or vertically. This option allows the column to be converted into a horizontal arm in
seconds, providing the tabletop and overhead camera positioning that are impossible with standard tripods . Perfectly supports most MINI DV
camcorders.

MDEVE ALUMINUM VIDEO TRIPOD 755B


008800
26.6in 19.1in 58.3in 64.2in 6.21b 15.4lb
_
3127/3137
8
3155

Same design as the 7568 but with larger leg diameter, top spider and leg locks, enabling the 7558 to handle a higher load capacity. Designed for the
professional videographers, this is an extremely versatile tripod , ideal for MINI DV camcorders. It is entirely made from aluminum, and has a removable
center column with built-in 50 mm leveling ball and bubble spirit level that can easily be re-fitted as a lateral arm. Not only does this allow the camera
to be offset from the leg position, it is also the simplest way to shoot a subject from directly overhead.

MDEVE ALUMINUM VIDEO TRIPOD 745B


00800 _ 8
24.8in 8.7in 54.3in 5.31b 15.4lb 3127/3137 3155

Two-stage aluminum tripod specifically geared towards "on-the-go" videographers looking for a simple, straightforward , and affordable tripod without
sacrificing stability. With a maximum load capacity of 13.21b, the new Manfrotto 7458 video tripod is designed to handle payloads commonly
associated with Mini DV or DVCAMs. An integrated 50mm leveling ball allows for quick set up with ±15° of leveling capability.
The 7458 is ideal for travel, quickly folding up to a compact 24.Bin and weighing only 5.3Ib. For applications that demand full extension, the 7458 has
a maximum working height of 54.3in. For low shots, the 7458 can provide support as low as B.7in with all three legs opened to a full 900 •

MDEVE MAGFIBER VIDEO TRIPOD 745MF3


00800
24.8in 8.7in 52.5in 4.4lb 13.21b
_
3127/3137
8
3155

Same design concept as the 7458 but with the tripod legs made using locking collars in magnesium and legs tubes in carbon fiber to provide better
torsion rigidity and less weight during transportation.

23
Video tripods

559B 558B 557B

VIDEO MONOPOD 559B VIDEO TRIPOD 3001 BWN


00000
21.7in 63.4in 1.31b 9.91b 3157N
008000
22.4in 6.7in 46.9in 58.3in 4.91b 8.81b 3127-3137 3155

Our most compact monopod , this four-section video monopod features, Lightweight, sturdy and portable, the 3001 BWN is one of Manfrotto's
quick-action leg locks, rubber grip, wrist strap, suction cup foot and easiest tripods to operate. Four position leg spreads, long center column
3299 camera plate adapter. Ideal to support small and very compact for extra adjustment, two leg warmers, quick flip lever locks, rubber feet
MINI DV camcorders. ... and retractable rubber feet with steel spikes are all incorporated into the
tripod. Ideal for DV and MINI DV camcorders.
VIDEO MONOPOD 558B
00000 VIDEO TRIPOD 3221WN
25.6in 62.6in 2.21b 17.6Ib 3433PL

Light and compact three-section professional monopod featuring rubber


008000
25 .6in 3.1 in 54.3in 71.3in 6.21b 15.4bs 3127-3137 3155
grip, suction cup foot, quick-action leg locks, wrist strap and 577 sliding
camera plate adapter to adjust the camera's center of balance. Same design as the 3001 BWN, but with larger dimensions, enabling the
Ideal for DVCAM and MINI DV camcorders. 3221WN to handle a higher load capacity.

VIDEO MONOPOD 557B


00000
26.4in 64.6in 2.21b 26.51b 3272

Solid and stable three-section professional monopod featuring rubber


grip, suction cup foot, quick-action leg locks, wrislstrap and 3273
sliding camera plate adapter to adjust the camera's center of balance.
Ideal for ENG style camcorders.

24
Video tripods

VIDEO TRIPOD 3068


800000
37in 18.1in 57.9in 68.1in 12.61b 39.71b 3067/3156

Stainless steel extension legs and extra sturdy leg locks make this the robust choice for video Reversible leg-end has rubber feet
crews around the world . The 3068 features a built-in spirit level at the shoulder and telescopic mid-level for smooth floors and stainless
spreader. It comes complete with rubber feet and retractable metal spike. Only available in silver, 3068. steel spikes for uneven terrain

BLACK VIDEO/MOVIE HEAVY TRIPOD 528XB


80000e
39in 28.7in 58.3in 16.31b 110lb 100mm

3067

The 528XB is the ideal location tripod , with a massive 11 Olb load capacity. It is a sturdy sir:lgle-stage tripod
with a single-tube leg structure. Tubes are made of stainless steel for strength under heavy loads, and
aluminum to decrease weight. The leg spread is fu lly adjustable, but also incorporates a 30° locked
position for faster set up and greater strength. A 100mm bowl accepts industry-standard half-ball video
heads and allows you to level the head quickly for accurate panoramic shots. The included claw ball
allows you to use it with heads not equipped with a half ball. The 528XB includes a versatile mid-level
spreader, which has telescopic " ratchet" braces that click into place in each of the preset positions for
faster deployment. Each brace can be individually set, allowing each tripod leg to be separately
positioned. The 528XB is the ideal choice for supporting camera jib arms.

25
Technical Features ART PRO VIDEO TRIPODS
For the A.R .T. (Advanced Release Technology - world wide patent pending) tripod series, Manfrotto's target has been to break the four second limit -
from securely closed to fully open in under four seconds without a single lever, button or knob -- a challenge we're extremely proud to say we matched
and surpassed, creating the world's fastest video tripod. But we would never forget that speed without stamina is only half the equation; agility without
strength is little more than a gimmick. Try the ART tripods in a head to head comparison with any other video tripods. The difference in speed and
practicality will astound you , and the performance will reassure you that A.R.T. is the perfect tool for your filming!
The future? The future is your work .. . your art ... our A.RT

Convenient padded handle for


rapid tripod opening
--T I

75mm bowl screw-in adapter


allows the A.R.T. to hold industry
standard 100mm or 75mm
half-ball video heads

Button rapidly unlocks top leg _ _ _____


sections for subsequent
fine-positioning

"Squid " mid-level spreader locks


the spreader brace inclination for
improved tripod stability even
with a smaller footprint

Lever unlocks lower leg sections


for fine positioning - simply
release the lever to relock
the section

To open the spreader, press the


ratchet pin and pull the leg
outwards to the desired click stop

To close, simply push the tripod leg


inwards; the telescopic spreader Model shown: 532ART
will retract automatically.

Included pull-on/off rubber feet


Each leg can be individually set quickly and precisely. Positioning the give firm grip on smooth floors;
tripod anywhere between minimum and maximum height can be done double stainless steel spikes
in four seconds. The tripod can be opened to any height or inclination are perfect on uneven terrain
from fully closed position in a matter of seconds at all leg angles

26
Video tripods

ART CARBON FIBER PRO VIDEO TRIPOD 542ART


008000
28.7in 15.7in 59.8in 8.81b 33.11b 75/ 100mm

Use of carbon fiber tubing makes this two-stage video tripod one of the lightest in its class. The 542ART uses our patented A.R.T. (Advanced Release
Technology) mechanism for the fastest opening, positioning and closing of any video tripod in the world, ideal for filming under pressure. Comes with
100mm-75mm bowl adapter for compatibility with all industry-standard half-ball video heads. Included mid-level "squid " spreader offers improved
torsional resistance and keeps legs locked safely in position even when space is cramped and tripod footprint is smaller. Double stainless steel spiked
feet also come with quick on/off rubber shoes for better grip on smooth floors. No protruding parts, levers or knobs to catch or damage. When closed,
tripod legs interlock without additional clips, straps or hooks to ensure compactness and prevent damage. Leg lock mechanism can be adjusted for
increased or reduced tightness.

ART ALUMINUM PRO VIDEO TRIPOD 532ART


008000
28.7in 15.7in 59.8in 9.71b 33.11b 75/ 100mm

Exactly the same as the 542ART but with aluminum leg tubes.

27
Video tripods

LIGHTWEIGHT VIDEO TRIPOD 525MVB


(lllOeOOe e
28.3in 12.6in 61.4in 7.7lb 33 .11b 75mm

A two stage, lightweight, high tensile aluminum tripod that is extremely rigid and stable. The 525MVB has a
die-cast aluminum crown with a built-in 75mm interface bowl, adjustable leg clamp levers for reliability and
safety in the field and a floor-level spreader which aids tripod leg angle setting adjustment. Lowest leg section
530SPRB/531 SPR
"
3198/3156

has twin spiked feet. The tripod can also be equipped with spiked feet shoes, different types of dollies and two
models of mid-level spreaders.

LIGHTWEIGHT VIDEO TRIPOD 515MVB


(lllOeOOe
28.3in 12.6in 61.4in 7.71b 33 .11b 100mm 530SPRB/531 SPR 3198/3156

Exactly the same as the 525MVB but with a 100mm bowl.

28
Video tripods

VIDEO PRO TRIPOD 3193


008008
37.4in 35.4in 59.4in 10.91b 44.11b 100mm
o
3189/530SPRB
e
3138 3198/3156

The 3193 has tandem aluminum legs combined with a 100 mm half bowl attachment. Features include high tensile
tubular aluminum legs with one step leg angle positioning system (21 °). Legs can be adjusted within a 180° arc to
other angle by using amid-level spreader, 531SPRB and 530SPRB, or by using a floor spreader, 3138. Legs can
be locked to any height with quick lever leg locks and stainless steel fittings. Twin spiked feet are standard. Also
available in: 3190 Silver, 3191 Silver with retractable spikes, 3192 Black with retractable spikes.

SHORT VIDEO PRO TRIPOD 3186


008008
20.5in 19.3in 26.8in 9.31b 44.11b 100mm 3189/530SPRB
e
3138 3198/3156

Short version of 3193. Also available in silver, 3185.

LIGHTWEIGHT VIDEO TRIPOD 3182


008008
36.6in 33.1in 59.4in 7.91b 44.11b 75mm 3189/530SPRB
e
3138 3198/3156

The 3182 is designed with tandem upper legs and single lower legs with variable angle adjustment and twin
spiked feet. It is supplied with a 15 mm half bowl attachment. Tripod top spider has a two step (18° - 28°) leg
angle positioning system. Legs can be adjusted within a 180° arc to other angle by using a mid-level spreader,
531SPRB and 530SPRB, or by using a floor spreader, 3138. Quick lever leg locks and stainless steel fittings
make this product extremely versatile and easy to use. Also available in silver, 3181.

CARBON FIBER LIGHTWEIGHT VIDEO TRIPOD 351 MVCF


008008
27.9in 24.2in 58in 6.81b 28.61b 75mm
o
3189/530SPRB 3198/3 156

The first two-stage carbon fiber video tripod from Manfrotto, equipped with a 75 mm half bowl, combines a twin
leg design for the first stage and a single leg design for the second stage of the tripod, complete with double
spiked feet. The legs have two angles adjustment; if they have to be adjusted to an angle of 180° the tripod
should be equipped with a mid-level spreader, 3189. These technical solutions create a tripod with unrivalled
torsion rigidity and substantial weight saving. All of the above listed features plus the use of composite materials
like aluminum, magnesium, carbon fiber and reinforced nylon plastic have generated the most innovative
support solutions for DV and MINI DV and compact ENG cameras.

29
Dollies, Spreaders and Stabilizers
Manfrotto dollies and spreaders maintain a tripod at a secure spread. Dollies provide instant maneuverability around the studio or on location and all
have fast action foot controlled braking systems.

VIDEO DOLLY 3127 BASIC DOLLY 3137


00
5.31b 43 .3in
o 0
7.51b 30.7in to 44.9in
Designed for light and medium weight tripods. The 3in wheels have a Everything that the 3127 has with the addition of variable spread to the
sure-lock feature that raises the wheels free of the ground so that the legs. Suitable for standard and spiked feet.
dolly rests on separate feet. Designed for Manfrotto's 3001 BWN, 3221WN, 745B, 745MF3, 755B,
Designed for Manfrotto's 3001 BWN, 3221WN, 745B, 745MF3, 755B, 755MF, 756B, 756MF3.
755MF, 756B, 756MF3.

VIDEO DOLLY 3067 PORTABLE DOLLY 3198


00
17.61b 44.1in •
00
13.71b 44.1in
Heavy duty, super sturdy dollies are designed for use with large still and Same as the 3067 dolly with the ability to accept spiked tip tripods .
video tripods . They feature large 5in individually braked wheels With Designed for Manfrotto's 3193, 3185, 3182, 351 MVCF.
cable guards. Folds for transporting.
Designed for Manfrotto's 3068.

FOLDING AUTO DOLLY 3156


00
9.91b 50in
Single lever braking system controls all three 3.1in wheels. Includes 3/8"
attachment wh ich allows you to fix a head for low angle shooting.
It folds legs for transporting and storage.
Designed for Manfrotto's 117B, 3193, 3185, 3182, 351 MCVF, 515MVB,
525MVB, 532ART, 542ART.
30
Accessories

TRIPOD SPREADER FOR TRIPOD SPREADER 3155


SPIKED FEET 3138
o • o •
1.4lb 31.5in to 51.2in
1.4lb 31.5in to 51.2in
Universal tripod spreader with variable diameter width controls from
Universal tripod spreader with variable diameter width controls from 31.50in to 51 .18in. Designed for Manfrotto's 3001 BWN, 3221WN, 745B,
31 .50in to 51 .18in. It accepts spiked tip tripod. 745MF3, 755B, 755MF, 756B, 756MF3.
Designed for Manfrotto's 3193, 3185, 3182, 351 MVCF.

MID-LEVEL SPREADER 3189


Designed to fit the mid-level leg joint casting of 3193., 3185 and 3182
and 351 MVB tripods to provide additional rigidity and
structural support.

LOW ANGLE STABILIZER 3427


Designed to increase stability only for "floor-level" working
positions. Quickly fitted between the 3138 spreader and the head lock-
ing system, it gives total rigidity with minimal torque movement even on
fast pans. Designed for Manfrotto's 515MVB and 525MVB Tripods.

MID-LEVEL SPREADER 531 SPRB


Designed to fit the mid-level leg joint casting of the 515MVB and
525MVB tripods to provide additional rigidity and structural support.
The spreader braces are telescopic .

SQUID MID-LEVEL SPREADER 530SPRB


Built to fit the mid-level leg joint casting to provide
additional rigidity and structural support, this innovative spreader is
called the "SQUID" because of its peculiar design. Unlike most spreaders,
it lets you fine tune the spreader brace angle to perfectly suit your
working position. In combination with this continuous angle adjustment,
you can use the quick click-stop arm length presets for rapid , precise
operation. Technology used on this product is patent-pending .
31
BUCKET BACKPACK 540BB
Faster to use than a traditional back pack and more convenient than having to carry your tripod
in your hand or under your arm. The bucket back p~ck is especially useful on longer journeys or
on wilder terrain, where you still need to know that you can release the tripod, set up and shoot
in seconds. It's designed to hold any of our tripods with any video head attached: the head is
placed in the lower "bucket" where its weight is better supported and less likely to swing off
balance and hurt you , and the legs extend up your back and are firmly tied in position.
For birdwatchers, airplane enthusiasts and other users of spotting scopes, the bucket backpack
will also let you transport your whole kit, with scope attached. The scope is cradled in the lower
part of the back pack, and the tripod legs extend up your back.

32
Carrying systems

HAND ·A LONG 540HL


The hand-a-Iong is a padded bar that encloses a short hand-carry strap which attaches to the built-in rings at either end of the first leg section of the
542ART/ 532ART pro video tripods . Because it's compact and attaches to one leg section only, you don 't need to take it off the tripod while shooting so
it's fast and convenient in the field . And it won 't get in the way of tripod positioning or filming. The grip is long enough to allow hand position to be moved
to match the center of balance of the tripod/head. Can be combined with strap 540STRAP.

SPACE PAD 540SP


Suitable for use with tripod models 542ART/ 532ART, the 540SP wraps quickly around the closed tripod legs, snaps securely in place and can be
positioned to match the center of balance of any tripod/ head combination. The space pad offers three distinct ways of carrying the tripod - hand-hold
by your side (so it stops the tripod banging against your legs); fireman -carry on your shoulder (where the padding makes carrying the tripod a less
awkward and painful task) or, in combination with strap 540STRAP, like a shoulder bag (protecting your legs and hips from bangs and bruises).

,
The special ergonomic closure Our special rubberized "bubble"
of the 540SP stays locked shut finish guarantees a secure
however loose or tight you set it, non-slip grip on the product
while the curved contour avoids
sharp edges and protects both
pad and contents

HAND A LONG 458HL


Provides a more comfortable carrying system for MDEVE and
3001 BWN/ 3221 WN , this carrying handle can be adjusted in length to
better balance the tripod during transportation.

33
Tripod Bags
A tripod is a wonderful thing. Carrying one has never been. That is until now. With our new carrying systems, we've worked from the inside out to
invent new contoured bag shapes that fit your kit and offer convenient ways of setting up and breaking down faster. Our bags offer you a "space
pad" that lets your shoulder carry your tripod without risking bangs and bruises and an open backpack that keeps your hands free and your tripod
protected with weight kept to a minimum. Whether you want a handle or a strap that doesn't even have to be removed, or whether you need a
protective shell to get your kit safely through airport baggage handling, we've got the solution. With innovative technical features, prime materials and
first class construction methods, the quality of all our bags and carrying solutions is up to the high standards you expect from Manfrotto.

Central handle
(on models MBAG120P,
MBAG100P, MBAG90P)

High quality, durable ballistic


nylon.

Padded Tripod Bag


(models MBAG120P,
MBAG100P, MAGB90P,
Adjustable carrying handle to
better balance transportation of
MBAG80P).
heavy heads mounted on the
tripod . (on model MBAG120P)
Padded end protects tripod head.

Shoulder strap End handle (on models


MBAG120P, MBAG100P,
MAGB90P, MAGB80P,
MBAGBSO)

Internal pocket holds video head


pan bar (on models MBAG120P,
MBAG100P, MAGB90P)

End opening allows for faster


"quiver"- style extraction and
insertion of the tripod .

34
Tripod bags

PADDED TRIPOD BAG 47.2in MBAG120P


The largest bag in the range, the MBAG120P is padded to protect your equipment and has the following features:
• Asymmetric tapered shape allows you to store the tripod with the head attached. Tripod legs fit comfortably in the narrower end (diameter 7.Bin) and
extra space is allowed for the larger volume of the head at the wider end (diameter 9in).
• Zip extends down the length of the bag, but also fully opens the top end of the bag.
• Thermoform padding holds the tripod in place in the bag and protects it, especially the head, during transport.
• Inner pocket holds accessories (such as video head pan bars)
• Innovative design and style, ballistic nylon, zips and other materials used are of top quality
• Can be hand-carried horizontally by the side handle, vertically by the end handle (also useful for storage), or shoulder-carried using the included
strap.

PADDED TRIPOD BAG 39.4in MBAG100P


Same design as the MBAG120P but in a different size and without the double positioning carrying handle

PADDED TRIPOD BAG 35.4in MBAG90P


Same design as the MBAG120P but in a different size and without the double position 'ng carrying handle.

PADDED TRIPOD BAG 31.5in MBAG80P


Basically the same as the MBAG120P, but smaller, and without the side handle or inner accessory pocket. The MBAGBOP is also narrower that the
other padded bags. The narrow end measures 5.1in diameter, the wide end measures 5.9in.

UNPADDED TRIPOD BAG 31.5in MBAG80


The MBAGBO is an unpadded tripod bag, offering the following features:
• Slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all
levers to be removed .
• Zip extends q,own the length of the bag , but also fully opens the top end of the bag.
• Logo end cap is padded to offer protection to the tripod head, the rest of the bag is unpadded.
• Shoulder strap included (the MBAGBO doesn't have either end or side handle) .
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.

UNPADDED TRIPOD BAG 27.6in MBAG70


Same as the MBAG80, but slightly smaller.

MBAG 100P MBAG100P MBAG120P

MBAG80P MBAG80 MBAG70

MBAG80P MBAG80 MBAG70

MBAG70

35
Tripod straps

3044 3044NAR
LONG STRAP 3044
The 3044 strap is a basic but convenient way to carry your kit. It has a spring clip that fastens quickly to the steel
ring at the shoulder of the tripod, and a closed loop that goes around the feet of the tripod and tightens to grip
them securely. Features an adapter for compatibility with all Manfrotto tripods and rubberized fabric for comfort
and to keep the tripod from slipping off your shoulder.

LONG STRAP 3044NAR


Same as 3044, but made with a narrower black rubberized fabric (15.7in width instead of 19.7in).

3044TSB 3447

SHORT STRAP 3044TSB


The 3044TSB is a simple loop strap, with a single spring clip that attaches to the quickly to the steel ring at the
shoulder of your tripod . Features an adapter for compatibility with all Manfrotto tripods. Strap is made of a gray
rubberized fabric for comfort and to keep the tripod from slipping off your shoulder.

SHORT STRAP 3447


Same as 3044TSB, but made .with a narrower black rubberized fabric (15.7in width instead of 19.7in).

STRAP 540STRAP
Made to measure for the 542ART and 532ART pro video tripods, the 540STRAP attaches to the built-in rings at
either end of the tripod 's top leg section to keep the load evenly balanced while carrying .
The ergonomically contoured strap has a rubber "tread " for comfort and and to keep the tripod from slipping off
your shoulder.

QUICK ACTION STRAP 401 N


A quick and easy accessory for carrying your tripod when walking, hiking, cycling or just getting from shoot to shoot. Use the shorter straps to fasten
the padded 401 N to one of the legs of your tripod , bind the remaining legs together using the longer adjustable quick release straps, slide the tripod
over your shoulder and you're ready to go, with your hands free to grab those vital last minute items. The padding helps hold the tripod in place and
protects your back from bruises and chaffing . The 401 N even stays attached to your tripod when shooting; all you need to do is release the longer
quick release straps so you can maneuver and position all three legs. Now you 're always ready to capture the images you want, but also always ready
to move off again to the next location. '

The strap stays attached to your Straps can be removed and


tripod when shooting custom-positioned to better match
the size of your tripod

36
Accessories

100MM HALF BALL 3141 BALL 100MM HALF BALL SHORT 500BALLSH
Half ball for leveling video heads on Video tripods provided with 100mm The 500BALLSH comes complete with a short locking handle to mount
bowl. all Manfrotto flat-base .heads to the 529B Hi-Hat.

75MM HALF BALL 3284 75MM HALF BALL SHORT 520BALLSH
Half ball for leveling video heads on Video tripods provided with 75mm The 520BALLSH comes complete with a short locking handle to mount
bowl. all Manfrotto flat-base heads to any 75mm bowl tripod including the
529B Hi-Hat (with optional adapter 3426).

VIDEO HEAD ADAPTER BOWL 3114


HI HAT 529B Adaptor kit to connect a 75 or 100 mm half bowl video head to a flat

() o e base tripod .

"5.7in
" 7.7in
0 B.lin 5.51b 44.11b 100mm

Manfrotto's new Hi-Hat enables you to get shots from the lowest possible
position. The 529B has adjustable leg angles to mount the camera in the
tightest or lowest of locations - and thanks to the built-in spreader you can
simply use the 529B on any even surface. The feet are rubber-padded to
protect delicate surfaces and have a hole so that the 529B can be screwed
to a ladder, apple-box or a sheet of wood. Recommended Heads: 519 SHORT HI-HAT LOCKING HANDLE 319SH
(with 3426 adapter), 516 (with 500BALLSH adapter), 3460 (with 500BALLSH Short locking handle to mount all Manfrotto video ball heads to the 529B
adapter), 3433 (with 500BALLSH adapter), 3274. Hi-Hat.

MONITOR HOLDER 3152


Designed to hold a monitor mounted on a tripod by using a standard
5/8in stud. Straps hold monitor securely in place.
-
100MM TO 75MM ADAPTER 3426
Converts all Manfrotto 100mm bowl tripods into a 75mm bowl.

Special additional feet


A complete line of foot conversions to adapt our tripods and monopods to all type of terrains in order to give them the maximum stability possible.
055SPK2
1905PK2
1905PK2N 055SCK2
44OSPK2 1905CK2
441SPK2 1905CK2N
449SP2 440SCK2
676SP2 441SC2 565 677SP
REVERSIBLE SUCTION SPIKE FOOT SHOES RUBBER/SPIKED
SPIKED FEET CUP/RETRACTABLE Set of 3. FOOT
Reversible rubber/metal spiked SPIKE FEET For tripod : 3186, 3193, 3182, 515MV8, Rubber foot for with retractable
feet (set of 3) supplied with A rubber section cup feet (set of 3) 351 MVCF, 525MV8 metal spike.
a dedicated fixing tool. with retractable stainless steel For monopod: 5578
The spike is made of a special spike. The suction cup increases
hard anodized aluminum alloy the footprint of the monopod by
extremely resistant to corrosion. almost 20 times, giving much
055SPK2 for tripod: 3221WN, 7458, greater stability when needed.
745MF3, 7558 The foot can be removed and
1905PK2 for tripod: old models of 3001 8WN, replaced at will .
7568 with 19mm leg diameter 055SCK2 for tripod: 3221WN, 7458,
1905PK2N for tripod: 30018WN, 7568 745MF3, 7558
440SPK2 for tripod: 756MF3 1905CK2 for tripod: old models of 3001 8WN,
441 SPK2 for tripod: 755MF3 7568 with 19mm leg diameter
449SP2 for monopod: 5598 1905CK2N for tripod: 30018WN, 7568
676SP2 for monopod: 5588 440SCK2 for tripod: 756MF3
441 SCK2 for tripod: 755MF3

37
System Guide
The chart below gives an overview of which tripods, heads and relevant accessories are compatible with the type of camera you want to support.

Prosumer Digital Camcorder Professional Camcorder

Micro OV
0 Mini OV
OVO Mini OV

Number of CCO: One Number of CCO: Three


Size of CCO: 1/4" Size of CCO: 1/ 3"

.- •
700RC2
--z
I

701RC2
z

• - •
3433 3460
Z

T3284
520BALLSH

3001BWN 532ART

rr
559B 756B 756MF3 755MF3 558B 5MVB 755MF3 3068 542ART

~PRB 531SPRB

?;:;: ?;:;: ?;:;: ?;:;:


3137 3137 3137 < 3137
.c:: ?;:;:
3198 3137
C l 3127
3137
~~ 3067 3198

t 'It 1905PK2N
t
440SPK2N
t
055SPK2
t
441SPK2 676SP2 565
t
055SPK2
t
441SPK2

449SP2 'It
1905CK2N
'It
440SCK2N
'It
055SCK2
'It
441SCK2 055SCK2 441SCK2

38
Key to Symbols

.~.
VIDEO CAMERA •
HEAD
T
HALF BALL
I
MONOPOD
f\~
TRIPOD
1 STAGE
TRIPOD
2 STAGE
.>-
MID LEVEL
SPREADER
,>-
SPREADER DOLLY

REVERSIBLE SUCTION CUP SPIKE FOOT


\
RUBBER SPIKED
SPIKED FEET RETRACTABLE SPIKE FEET SHOES ADAPTER FOOT

Pro ENG Camcorder


DV
DVCam
DVC Pro
DIGI Beta
Betacam SP
Betacam SX

Number of CCD: Three


Size of CCD: 1/2" or 2/3"

• -
516

.-

I
Tt
3141BALL 3141BALL
500BALLSH 50QBALLSH

I I -

rt"
532ART

rr rr
f 3182 5MVB 542ART 5MVB 3068 528XB 528XB 559B
r 1MVCF

~PRB ~PRB ~
T
~
13155
530SPRB 531SPRB 531SPRB

~
1 13155
530SPRB

3138 3138

~~<>::::~~<>::~?::::
114MVB 3198 3198 3198 3067 3198

565 565 565 565 565 677SP

39
Prosumer digital camcorder video kits (with 700RC2 head)
The perfect combination of head and tripod selected to firmly support lightweight MINI DV cameras. All kits come with a carrying bag .

KIT 700RC2, 756BK KIT 700RC2, 756MF3K KIT 700RC2,3001 BWN


8000
60.1in 21.5in 61b 5.51b
8000
60 .1 in 21 .5in 61b 5.51b
8000
62in 10.5in 61b 5.51b

Comprised of: Comprised of: Comprised of:


700RC2 Head 700RC2 Head 700RC2 Head
756B Tripod 756MF3 Tripod 3001 BWN Tripod
MBAG70 Bag MBAG70 Bag MBAG70 Bag

40
Prosumer digital camcorder video kits (with 701 RC2 head) Video kit
The perfect combination of head and tripod selected to firmly support lightweight MINI DV cameras. All kits come with a carrying bag.

KIT 701 RC2, 755BK KIT 701 RC2, 755MF3K KIT 701 RC2, 745BK
• • 00
68.1in 23.1in 7.91b 8.81b
• • 00
68.1 in 23.1 in 7.91b 8.81b
• • 00
58.3in 12.6in 7.11b 8.81b

Comprised of: Comprised of: Comprised of:


701RC2 Head 701RC2 Head 701RC2 Head
755B Tripod 755MF3 Tripod 745B Tripod
MBAG80 Bag MBAG80 Bag MBAG80 Bag

KIT 701 RC2,3221 BWN. KIT 701 RC2, 745MF3K


• • 00
75.2in 10.7in 7.91b 8.81b
• • 00
56.5in 12.6in 6.21b 8.81b

Comprised of: Comprised of:


701RC2 Head 701RC2 Head
3221WN Tripod 745MF3 Tripod
MBAG80 Bag MBAG80P Bag

41
Professional camcorder video kits (with 3433 head)
A selection of Manfrotto tripods and heads chosen specifically to meet the demand and weight issues of medium duty MINI DV professional
camcorder. All kits comes supplied with a carrying bag.

KIT 501, 755BK KIT 501, 755MF3K KIT 501, 745BK


8000
68.3in 23.2in 9.51b 12. 11b
8000
68.3in 23.2in 9.51b 12.11b
8000
58.5in 12.8in 8.61b 12.11b

Comprised of: Comprised of: Comprised of:


3433 Head 3433 Head 3433 Head
755B Tripod 755MF3 Tripod 745B Tripod
MBAG80P Bag MBAG80P Bag MBAG80P Bag

KIT 3221 WN-501 KIT 501, 525PKIT KIT 501, 745MF3K


8000
75.4in 7.3in 9.51b 12.11b
8000
65 .6in 16.7in 121b 13.21b
8000
56 .7in 12.8in 7.71b 9.9Ib ·

Comprised of: Comprised of: Comprised of:


3433 Head 3433 Head 3433 Head
3221WN Tripod 525MVB Tripod 745MF3 Tripod
MBAG80 Bag 3284 Half Ball MBAG80P Bag
MBAG90P Bag
42
Professional camcorder video kits (with 3460 head)
A selection of Manfrotlo tripods and heads chosen specifically to meet the demand and weight issues of medium duty MINI DV professional
camcorder. All kits come with a carrying bag.

KIT 503, 755BK KIT 503, 755MF3K KIT 503, 745BK


.000
68.3in 23 .2in 9.71b 11 .91b
.000
68.3in 23 .2in 9.71b 11 .91b
.000
58.5in 12.8in 8.81b 11 .91b

Comprised of: Comprised of: Comprised of:


3460 Head ' 3460 Head 3460 Head
755B Tripod 755MF3 Tripod 745B Tripod
MBAG80P Bag MBAG80P Bag MBAG80P Bag

KIT 503,745MF3K KIT 503,351 MVCFK KIT 503, 525PKIT


.000
56.7in 12.8in 7.91b 9.71b
.000
63in 19.9in 11 .71b 17.61b
.000
65.6in 16.7in 12.21b 17.61b

Comprised of: Comprised of: Comprised of:


3460 Head 3460 Head 3460 Head
745MF3 Tripod 351 MVCF Tripod 525MVB Tripod
MBAG80P Bag 3189 Spreader 3284 Half Ball
565 Feet MBAG90P Bag
MBAG90P Bag
43
Pro ENG camcorder video kits (with 516 head)
A range of kits for industrial applications utilizing heavy duty ENG cameras. All kits come with a carrying bag.

KIT 516, 542ART . KIT 516, 515PKIT


800 0
64 .Bin 20.7in 15.4lb 221b
8000
66.3in 17.5in 13.4lb 221b

Comprised of: Comprised of: .


516 Head 516 Head
542ART Tripod KIT 516, 532ART 515MVB Tripod
3141 BALL Half Ball Same as 516, 542ART 3141BALL Half Ball
MBAG100P Bag but with 532ART Tripod MBAG100P Bag

KIT 516-3193 KIT 516, 351 MVCFK


8000
64.4in 40.4in 17.2Ib 221b
8000
63.Bin 20.6in 12.61b 221b

Comprised of: Comprised of:


516 Head 516 Head
3193 Tripod 351 MVCF Tripod
3138 Spreader 3189 Spreader
MBAG120P Bag 265 Feet
MBAG120P Bag
44
Pro ENG camcorder video kits (with 519 head)
A range of kits for industrial applications utilizing heavy duty ENG cameras. All kits come with a carrying bag.

KIT 519, 542ART KIT 519, 525PKIT


.000
65.1in 21in 15.21b 221b
.000
66.7in 17.8in 14.11b 221b

Comprised of: Comprised of:


519 Head • KIT 519, 532ART 519 Head
542ART Tripod • Same as 519, 542ART 525MVB Tripod
MBAG100P Bag but with 532ART Tripod MBAG100P Bag

KIT 519MVBKIT KIT 519, 351 MVCFK


.000
66.3in 38.3in 16.4lb 221b
.000
64 .7in 21.6in 14.61b 22 1b

Comprised of: Comprised of:


519 Head 519 Head
3182 Tripod 351 MVCF Tripod
3138 Spreader 350SPRB Spreader
MBAG120P Bag 265 Feet
MBAG120P Bag
45
Pro ENG camcorder video kits (with 3274 head)
A range of kits for industrial applications utilizing heavy duty ENG cameras. All kits come with a carrying bag .

KIT 3193-316 KIT 316, 528XBK


8000
64.6in 40 .6in 22 .81b 34.21b
8000
63.4in 33.9in 28.31b 35.31b

Comprised of: Comprised of:


3274 Head 3274 Head
3193 Tripod 528XB Tripod
3138 Spreader MBAG120P Bag
MBAG120P Bag

46
Index
Art N° Description Page Art w Description Page

055SCK2 SUCTION CUP/ RETRACTABLE SPIKE FEET 37 519, 532ART VIDEO KIT 45
055SPK2 RETRACTABLE SPIKE FEET-STAINLESS STEEL 37 519, 542ART VIDEO KIT 45
1905PC2 SUCTION CUP/ RETRACTABLE SPIKE FEET 37 519LV PAN BAR 13
1905PK2 RETRACTABLE SPIKE FEET-STAINLESS STEEL 37 519MVBKIT VIDEO KIT 45
1905PK2N RETRACTABLE SPIKE FEET-STAINLESS STEEL 37 520BALLSH 75 MM HALF BALL 37
3OO1BWN VIDEO TRIPOD 24 521 BASIC REMOTE CONTROL FOR SONY/ CANON 18
3044 LONG STRAP 36 521P BASIC REMOTE CONTROL FOR PANASONIC 18
3044NAR LONG STRAP 36 521 PRO REIV10TE CONTROL PRO FOR SONY/ CANON 18
3044TSB SHORT STRAP 36 522EXTC REMOTE CONTROL CABLE EXTENSION 19
3067 VIDEO DOLLY 30 522EXTC30 REMOTE CONTROL CABLE SUPER EXTENSION 19
3068 VIDEO TRIPOD 25 522P REMOTE CONTROL FOR PANASONIC 17
3114 VIDEO HEAD ADAPTER BOWL 37 522PB12 REMOTE PAN BAR ADAPTER 19
3127 PORTABLE DOLLY 30 522PB12P REMOTE PAN BAR ADAPTER 19
3137 BASIC DOLLY 30 522PB13 REMOTE PAN BAR ADAPTER 19
3138 TRIPOD SPREADER FOR SPIKED FEET 31 522PB13P REMOTE PAN BAR ADAPTER 19
3141 BALL 100 MM HALF BALL 37 522PB14 REMOTE PAN BAR ADAPTER 19
3152 MONITOR HOLDER 37 522PB14P REMOTE PAN BAR ADAPTER 19
3155 TRIPOD SPREADER 31 522PB16 REMOTE PAN BAR ADAPTER 19
3156 FOLDING AUTODOLLY 30 522PB16P REMOTE PAN BAR ADAPTER 19
316,528XBK VIDEO KIT 46 522PB18 REMOTE PAN BAR ADAPTER 19
3182 LIGHTWEIGHT VIDEO TRIPOD 29 522PB18P REMOTE PAN BAR ADAPTER 19
3185 SHORT VIDEO PRO TRIPOD 29 522PB22 'REMOTE PAN BAR ADAPTER 19
3189 MID LEVEL SPREADER 31 522PB22P REMOTE PAN BAR ADAPTER 19
3193 VIDEO PRO TRIPOD 29 522PB25 REMOTE PAN BAR ADAPTER 19
3193-316 VIDEO KIT 46 522PB30 : RE.MOTE PAN BAR ADAPTER 19
3198 PORTABLE DOLLY 30 522SCA REMOTE CONTROL CABLE STANDARD 19
3221WN VIDEO TRIPOD 24 523PRO REMOTE CONTROL PRO FOR SONY/CANON 16
3221WN-501 VIDEO KIT 42 523RC RAIN COVER FOR REMOTE CONTROL 19
3273 PRO VIDEO QUICK RELEASE ADAPTER 13 525MVB LIGHTWEIGHT VIDEO TRIPOD 28
3274 PRO FLUID VIDEO HEAD 12 528XB VIDEO TRIPOD HEAVY 25
3284 75 MM HALF BALL 37 529 HI HAT 37
3299 RECTANGULAR VIDEO ADAPTER 13 530SPRB "SQUID" MID LEVEL SPREADER 31
3426 100 MM TO 75 MM ADAPTER 37 531SPRB MID LEVEL SPREADER 31
3427 LOW ANGLE STABILIZER 31 532ART ART ALUMINUM FIBER VIDEO TRIPOD 27
3433 PRO VIDEO HEAD 8 540BB BUCKET BACKPACK 32
3433HK PAN BAR 13 540HL HANDA LONG 33
3447 SHORT STRAP 36 540SP SPACE PAD 33
3460 PRO FLUID VIDEO HEAD 9 540STRAP TRIPOD CARRY STRAP 36
3460HK PAN BAR 13 542ART ART CARBON FIBER VIDEO TRIPOD 27
351 MVCF CARBON FIBER LIGHTWEIGHT VIDEO TRIPOD 29 553 LEVELING CENTER COLUMN ANGLE BRACKET 22
357PLONG PRO VIDEO CAMERA PLATE LONG 13 557B VIDEO MONOPOD 24
401N QUICK ACTION STRAP 36 558B VIDEO MONOPOD 24
441SCK2 SUCTION CUP/ RETRACTABLE SPIKE FEET 37 559B VIDEO MONOPOD 24
441SPK2 RETRACTABLE SPIKE FEET-STAINLESS STEEL 37 565 SPIKE FOOT SHOES 37
449SP2 REVERSIBLE SPIKED FOOT 37 517 VIDEO QUICK RELEASE ADAPTER 13
458HL HAND A LONG 33 676SP2 RETRACTABLE SPIKE FOOT-STAINLESS STEEL 37
500BALLSH 100 MM HALF BALL 37 617SP RETRACTABLE SPIKE FOOT 37
501, 525PKIT VIDEO KIT 42 700RC2 MINI VIDEO HEAD 6
501,745BK VIDEO KIT 42 700RC2, 3001 BWN VIDEO KIT 40
501,745MF3K VIDEO KIT 42 700RC2, 756BK VIDEO KIT 40
501,755BK VIDEO KIT 42 700RC2, 756MF3K VIDEO KIT 40
501, 755MF3K VIDEO KIT 42 701RC2 MINI VIDEO HEAD 7
501PLONG VIDEO CAMERA PLATE 13 701 RC2, 3221 BWN VIDEO KIT 41
503, 525PKIT VIDEO KIT 43 701RC2,745BK VIDEO KIT 41
503, 351 MVCFK VIDEO KIT 43 701RC2,745MF3K VIDEO KIT 41
503,745BK VIDEO KIT 43 701 RC2, 755BK VIDEO KIT 41
503,745MF3K VIDEO KIT 43 701 RC2, 755MF3K VIDEO KIT 41
503,755BK VIDEO KIT 43 745B MDEVE ALUMINUM VIDEO TRIPOD 23
503, 755MF3K VIDEO KIT 43 745MF3 MDEVE CARBON FIBER VIDEO TRIPOD 23
515MVB LIGHTWEIGHT VIDEO TRIPOD 28 755B MDEVE ALUMINUM VIDEO TRIPOD 23
516 PRO FLUID VIDEO HEAD 10 755MF3 MDEVE MAG FIBER VIDEO TRIPO 23
516-3193 VIDEO KIT 44 756B MDEVE ALUMINUM VIDEO TRIPOD 23
516,351MVCFK VIDEO KIT 44 756MF3 MDEVE MAG FIBER VIDEO TRIPO 23
516, 515PKIT VIDEO KIT 44 MBAG70 TRIPOD BAG 70CM 35
516,532ART VIDEO KIT 44 MBAG80 TRIPOD BAG 80CM 35
516,542ART VIDEO KIT 44 MBAG80P PADDED TRIPOD BAG 80 CM 35
519 PRO FLUID VIDEO HEAD 11 MBAG90P PADDED TRIPOD BAG 90 CM 35
519,351MVCFK VIDEO KIT 45 MBAG100P PADDED TRIPOD BAG 100CM 35
519,525PKIT VIDEO KIT 45 MBAG120P PADDED TRIPOD BAG 120CM 35

47
bogen
Imaging
Bogen Imaging
Inc 565 East Crescent Avenue, Ramsey, NJ 07446
Tel.: (201) 818-9500 - Fax: (201) 818-9177
Service only: (201) 818-0060
www.bogenimaging.us - E-mail : info@bogeni maging .com

Photography: Corrado Daleo


Product photography: Roberto Bigano/Multistudio

© Gruppo Manfrotto 2004


Whilst every effort has been made to ensure that the information contained within this catalogue is correct, Gruppo Manfrotto sri accepts no liability for errors or omissions. Technical specifications and data are provided for
guidance only. All rights are strictly reserved, Products shown in this catalogue are protected by international patents, while this publication (in whole or in part) without written consent from Gruppo Manfrotto sri is strict·ly
forbidden and punishable by law. Because we constantly aim to improve our products, we reserve the right to amend or alter at any time and without prior notice the specifications of any item detailed in this publication.

ISSUE CODE LNORDV04,L ISSUE NUMBER W1 - 11/04

You might also like