Maintenance Guide YT220

Download as pdf or txt
Download as pdf or txt
You are on page 1of 28

Maintenance Guide

Terberg YT 220 / 180 series


CONTENTS
• Washing precaution
• Hour meter reading
• Greasing Point
• Re torque
• Welding Precaution
• Brake Lining inspection
• Current Tapping (for External Application)
• Fuel Water separator
Washing precaution
• Engine compartment.
• Sealing of hydraulic cylinders and sealing of the
drive line components).
• electrical equipment or electrical central cover
sealing.
• breathers.
• too close at a radiator, this can damage the
cooling fins of the radiator.

Washing precaution
Hour meter reading
Greasing Point

Rear Rigid Axle – Terberg TTA 70-01 –


Brake Adjuster Greasing Points (4 points)
Rear Rigid Axle – Terberg TTA 70-01 –
Brake Adjuster Greasing Points (2 points)
Front Steering Axle –
Terberg TTA 60-01 –
Knuckle Assembly
Greasing Points
(4 points)
Greasing Point
Cabin Door Hinges Greasing Points
(3 Points )
Transmission Manhole Cover Hinges
Greasing Points (2 points)
5th Wheel Lift Arm Cylinders
Greasing Points (4 points)
5th Wheel Claw Greasing Points ( 2 points)
SURFACE SURFACE

Apply Greasing On 5th Wheel Table


Re torque
Torque Wrench
* Welding Precaution
* Brake Lining Inspection
* 24 V Current Tapping From
Connector 625 For External Application
625
002 Extra
Safety Relay

026- 026+
Negative Positive

KD-
15+

003/004
Earth
Check & Drain Fuel Water Separator regularly.
Check & Drain Fuel Water Separator regularly.

You might also like