RRU5517 T

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Name RRU5517t

Basic Specifications
Version SRAN18.1

Model WD5MBW5517T0

RF Specifications
Frequency Band
AWS+PCS+ 2600
(MHz)

Protocol-defined
AWS: Band 66/n66 PCS: Band 2/n2 2600: Band 7/n7
Band

RX Frequency
AWS: 1710 to 1780 PCS: 1850 to 1910 2600: 2500 to 257
Band (MHz)

TX Frequency
AWS: 2110 to 2180 PCS: 1930 to 1990 2600: 2620 to 2690
Band (MHz)

AWS: UMTS, LTE FDD, UL, LN (SUL), ULN (SUL), NR FDD, UN (FDD), LN
(FDD), ULN (FDD) PCS: UMTS, LTE FDD, GU, GL, UL, GUL, LM, GLM,
RAT ULM, GULM, NR FDD, GN (FDD), UN (FDD), LN (FDD), GLN (FDD), ULN
(FDD), GULN (FDD), LMN (FDD), GLMN (FDD) 2600 MHz: LTE FDD, NR
FDD, LN (FDD)

IBW (MHz) AWS: 70 PCS: 60 2600: 70

OBW (MHz)

TX/RX Channel AWS: 4T4R PCS: 4T4R 2600 MHz: 4T4R


GSM: 8 carriers UMTS: 8 carriers (without MIMO); 4 carriers (with MIMO)
LTE FDD: 3 carriers (one band), 6 carriers (two bands), 9 carriers (three
Carrier Capacity bands) LTE NB-IoT: 8 carriers when the NBIoT multi-carrier function is
enabled; 1 carrier when the NB-IoT multi-carrier function is disabled NR
FDD: 3 carriers (one band), 6 carriers (two bands), 9 carriers (three bands)

Supported LTE FDD: 5/10/15/20 NR FDD: AWS, 5/10/15/20/25/30 PCS/2600 MHz,


Bandwidth (MHz) 5/10/15/20/25/30/40

AWS: 4x100 W PCS: 4x100 W 2600 MHz: 4x60 W AWS+PCS: 4x120 W


Maximum Output
AWS+2600 MHz: 4x160 W PCS+2600 MHz: 4x160 W AWS+PCS+2600
Power per Module
MHz: 4x160 W

NR SUL Carrier
: 3 carriers (one band), 6 carriers (two bands), 9 carriers (three bands)
Configuration

GSM Receiver
Sensitivity with
-114.0
One Antenna
(dBm)

UMTS Receiver
Sensitivity with
-125.6
One Antenna
(dBm)

LTE FDD Receiver


Sensitivity with
-106.6
One Antenna
(dBm)

LTE TDD Receiver


Sensitivity with
-127.3
One Antenna
(dBm)
NB-IoT Receiver
Sensitivity with
One Antenna
-106.3
(dBm)

NR FDD Receiver
Sensitivity with
-127.3
One Antenna
(dBm)

NR TDD Receiver
Sensitivity with
-106.2
One Antenna
(dBm)

Antenna Specifications
Antenna Form

Engineering Specifications
Power Input Type -48 V DC

Operating Voltage –36 V DC to –57 V DC

Dimensions (H x
520 mm x 480 mm x 140 mm (20.47 in. x 18.90 in. x 5.51 in.) (35 L)
W x D)

Weight 34 kg (74.97 lb, excluding mounting kits)

Typical Power Consumption (W)a: 1290


Module Power a: The typical power consumption of an RF module is measured when the
Consumption ambient temperature is 25°C (77°F) and the traffic load reaches 50%. The
actual power consumption has a 10% deviation from this value.
Operating Without sunlight exposure: –40°C to +55°C (–40°F to +131°F) With sunlight
Temperature exposure of 1120 W/m: –40°C to +50°C (–40°F to +122°F)

Protection Rating IP65

Relative Humidity 5% RH to 100% RH

Absolute Humidity 1 g/m3 to 30 g/m3

Altitude ≤ 4000 m (13123.36 ft)

Anti-Seismic
NEBS GR63 zone4
Performance

Surge Protection
DC:20 kA
Specifications

CPRI Port Specifications


CPRI Protocol
CPRI
Type

Number of CPRI
2
Ports

CPRI Data Rate


2.5/4.9/9.8/10.1/24.3
(Gbit/s)

GSM:6
UMTS:6
Maximum Levels
LTE FDD:4
of Cascading with
LTE NB-IoT:4
a BBU
NR SUL:4
NR FDD:4

GSM:40
UMTS:40
LTE FDD:When the LBBPc or LBBPd1 is configured: 20
Maximum When the LBBPd2 or UBBP is configured: 40
Distance from the When the LBBPd3 is configured: 40 (number of cells ≤ 3); 20 (number of
BBU (km) cells ≥ 4)
LTE NB-IoT:20
NR SUL:20
NR FDD:20
Hardware Description
RRU Form Blade RRU

You might also like