MATERIAL APPROVAL

Project:

BDX CGK4 JAH - DRC1 BUILDING & LLE PLINTHS WORKS

Scope of Work
MVAC
Nomor : 032/MA/MVAC/BS-BDx/V/2024 Revision :
Date : 25 Mei 2024 Pages : from page

MATERIAL DATA SHEET

1. Specification
a. Material Name : Pipa Refrigerant & Insulation
b. Merk : Kembla
c. Type/Model : Copper Tube (ASTM B280), Pair Coil

Refrigerant Piping Installation for PAU; dia.9.6 + dia

2. Location BoQ 19,32 -
19.1
Refrigerant Piping Installation for FCU; dia.9.5 + dia
BoQ 19,33 -
15.9
Refrigerant Piping Installation for FCU; dia.6.4 + dia
BoQ 19,34 -
12.7

3. Reference
V BOQ (Technical Specification) B.A Clarification B.A Anwijing
Picture numbers .......... Date ................ Date ................

4. Attachment
V Brochure Sample Material Drawing ( Shop drawing )
(Technical Specification)
5. Conclusion
Approved for used in the field

Not Approved for used in the field

6. Notes
..................................................................................................................................................................................
..................................................................................................................................................................................
..................................................................................................................................................................................

Prepared/Submitted by Approved by Acknowledge by Acknowledge by Acknowledge by

PT. Acset Indonusa Tbk NV5 T&T BDx D&B Central Team

Budi Prasetyo Horace Ferry Sitorus Benny Splumbanraja ___________________

Date: Date: Date: Date: Date:
Copper Tube L

AIR CONDITIONING
& REFRIGERATION
COPPER TUBE
AS/NZS 1571
ASTM B280
BSEN 12735

www.kembla.com.au
Copper Tube L
MM Kembla has been providing our customers with the highest quality and most reliable
products and services for over 100 years. Established in 1916, MM Kembla is Australia's only
copper tube manufacturer. Still operating from its original site at Port Kembla, NSW Australia,
MM Kembla remains the most highly regarded supplier of copper products including tube,
fittings and accessories. Extensive technical knowledge combined with stringent in-house
quality controls and testing with an ISO 9001 certified quality management system, MM
Kembla has developed a renowned reputation for quality, reliability and service.

AIR CONDITIONING & REFRIGERATION TUBE R22 and requires a thicker wall tube and significantly stronger
copper fittings. 15% silver solder is recommended when brazing
KEMBLA copper tube is manufactured to a variety of
®
tube for use with R410A or other high pressure refrigerants.
international standards, including Australian, New Zealand,
British/European and American, and is suitable for different Tubes are available from 6.35mm (1/4”) to 104.78mm (4-1/8”)
applications such as plumbing, air conditioning, refrigeration, diameter in various wall thicknesses depending on the Standard,
medical gas, and general engineering applications. as shown in the following tables.
Included in the KEMBLA® ranges are the three International
Standards for air conditioning and refrigeration grade tubes, REFRIGERATION FITTINGS
which have different internal cleanliness specifications: TO AMERICAN STANDARD ASME B16.22
• Australian/New Zealand Standard AS/NZS 1571 KEMBLA® fittings are marketed under the famous KEMBLA®
(max. total residue shall not exceed 0.038g/m2) and K Tick brand marks. The ASME B16.22 range of fittings is
• A
 merican Standard ASTM B280 available to suit all KEMBLA® air conditioning and refrigeration
(max. total residue shall not exceed 0.038g/m2) grade tubes, and are stocked in various Kembla warehouse
• E
 uropean Standard EN 12735-1 locations throughout Australia, New Zealand and South East Asia.
(max. total carbon residue shall not exceed 0.038g/m2) Each fitting is permanently marked with the KEMBLA® or K Tick
All KEMBLA tubes are guaranteed to comply with each of
® brand mark and are individually cleaned, bagged and labeled to
these relevant Standards and Test Certificates are provided fully comply with the cleanliness requirements of AS/NZS 1571,
for all products upon request. After cleaning, all tubes are ASTM B280 and EN 12735-1. Refer to the KEMBLA ‘Refrigeration
individually end-capped to maintain their internal cleanliness. Fittings Range’ brochure on our web site.
All straight tubes are manufactured in 5.8m lengths for ease of
containerisation and are bundled and wrapped in plastic for
maximum protection. Individual coils are also wrapped in plastic,
packed into cardboard cartons and palletized for delivery.
Included in some ranges are products suitable for high-pressure
refrigerants such as R410A and R32, which are ozone friendly
refrigerants. These tubes are identified and protected with pink
caps to designate they are “high pressure refrigerant tubes”.
R410A for example has a 60% higher operating pressure than
Copper Tube TO ASTM B280 L
KEMBLA® COPPER TUBE TO AMERICAN STANDARD ASTM B280
PRODUCT STANDARD ACTUAL (inch) ACTUAL (mm) WEIGHT SAFE WORKING PRESSURE (kPa)# LENGTHS/
CODE SIZE (inch) O.D. W.T. O.D. W.T. (kg/length) 500C 700C BUNDLE

T51420 1/4" 1/4" 0.030 6.35 0.76 0.69 9,900 8,450 100
T21688 3/8" 3/8" 0.030 9.52 0.76 1.09 6,350 5,420 100
T21173 1/2" 1/2" 0.035 12.70 0.89 1.71 5,520 4,710 100
T15123 5/8" 5/8" 0.040 15.88 1.02 2.47 5,030 4,290 100
T24453 3/4" 3/4" 0.042 19.05 1.07 3.14 4,370 3,730 100
T62952 7/8" 7/8" 0.045 22.22 1.14 3.92 3,970 3,390 100
T82010 1-1/8" 1-1/8" 0.050 28.58 1.27 5.65 3,420 2,920 50
T13546 1-3/8" 1-3/8" 0.055 34.92 1.40 7.65 3,070 2,620 50
T25513 1-5/8" 1-5/8" 0.060 41.28 1.52 9.85 2,810 2,400 25
T76024 2-1/8" 2-1/8" 0.070 53.98 1.78 15.14 2,510 2,140 25
T81260 2-5/8" 2-5/8" 0.080 66.68 2.03 21.39 2,310 1,970 25
T22196 3-1/8" 3-1/8" 0.090 79.38 2.29 28.77 2,190 1,870 20
T71115 4-1/8" 4-1/8" 0.110 104.78 2.79 46.38 2,010 1,720 10

KEMBLA® ANNEALED COILS TO AMERICAN STANDARD ASTM B280

PRODUCT STANDARD ACTUAL (inch) ACTUAL (mm) WEIGHT SAFE WORKING PRESSURE (kPa)# COILS/ COILS/
CODE SIZE (inch) O.D. W.T. O.D. W.T. (kg/Coil) 500C 700C CARTON PALLET

T59420 1/4" 1/4" 0.030 6.35 0.76 1.79 9,830 8,400 13 468
T58122 5/16" 5/16" 0.032 7.94 0.81 2.43 8,300 7,090 5 160
T32773 3/8" 3/8" 0.032 9.52 0.81 2.97 6,810 5,810 8 320
T33016 1/2" 1/2" 0.032 12.70 0.81 4.06 5,000 4,270 6 240
T33121 5/8" 5/8" 0.035 15.88 0.89 5.62 4,240 3,620 5 200
T33300 3/4" 3/4" 0.035 19.05 0.89 6.81 3,500 2,990 4 128
T21100 7/8" 7/8" 0.045 22.22 1.14 10.13 3,990 3,400 3 132

# Safe Working Pressures are based on annealed temper

REFRIGERANT PRESSURE-TEMPERATURE CHART

The following table is a comparison Refrigerant Saturated Vapour Pressures (kPa)

of operating pressures for the -40 C 0
-20 C0
0 0C 200C 400C 600C 700C
most common refrigerants and R22 5 145 397 810 1,433 2,326 2,884
can be used for determining which
R32 76 304 712 1,374 2,377 3,831 4,776
copper tube size is required. This
is a guide only and the refrigerant R134a -47 39 192 469 915 1,581 2,016
manufacturer should be consulted R404A 26 195 498 989 1,729 2,789
for more specific information. R407C 19 179 467 936 1,648 2,668 3,318
R410A 76 303 704 1,353 2,336 3,749 4,631
R438A 12 162 432 873 1,539 2,495 3,104
R507 40 216 525 1,024 1,778 2,859 3,554
R744 (CO2) 904 1,869 3,384 5,625 7,106 (@300C)

TECHNICAL SUPPORT
MM Kembla is renowned as one of the world’s leading experts
for technical support regarding copper tube and fittings.
We invite hydraulic consultants, engineers, distributors and
installation contractors to visit our website where we provide
a comprehensive range of technical information.
PairCoil

PRE-INSULATED
ANNEALED
COPPER
PAIRCOIL

USAGE STANDARD
•  Split system air
conditioners PAIRCOIL
•  All sizes suitable for With a tough exterior surface
R410A refrigerant for easy installation.
•  Condensation • 
Backed by MM Kembla’s reputation for quality, service and customer
prevention care for 100 years.
• Easy installation. No glue, tape or messy powder.
• 20m rolls of pre-insulated copper paircoils allows you to install your
pipework in less than half the time of conventional methods.
• UV protection.
• Resistance to abrasion and wear and tear.
• Can be pushed through tight spaces without being caught or torn.
PairCoil
PHYSICAL DIMENSIONS
Kembla Copper tube Copper tube R-Values Paircoil Total pack Carton Cartons
product outside diameter outside diameter length weight dimensions per
code x wall thickness (mm) (inches) (m) (kg) (cm) pallet
T99515 6.35 x 0.81 - 9.52 x 0.81 1/4 - 3/8 0.2 20 8.19 59 x 18 x 61 24
T99525 6.35 x 0.81 - 12.70 x 0.81 1/4 - 1/2 0.2 20 9.92 65 x 18 x 67 24
T99535 6.35 x 0.81 - 15.88 x 1.02 1/4 - 5/8 0.2 20 13.37 73 x 18 x 75 8
T99555 9.52 x 0.81 - 15.88 x 1.02 3/8 - 5/8 0.2 20 15.12 77 x 23 x 79 8
T99565 9.52 x 0.81 - 19.05 x 1.14 3/8 - 3/4 0.2 20 18.30 80 x 23 x 82 6

COPPER TUBE SAFEWORKING PRESSURE (kPa) INSULATION PROPERTIES

Copper Tube SWP (kPa) Material Highly flexible paired, cross
Dimensions @50˚C @65˚C @75˚C linked, closed cell polyethylene
Metric (mm) Thermal Conductivity 0.037 W/m.K at 20oC
6.35 x 0.81 10,635 9,545 8,820 Tensile Strength 34.2 (3.49)min N/cm2 (kgf/cm2)
9.52 x 0.81 6,800 6,105 5,640 Water Absorption 0.0076 max g/100cm2
12.70 x 0.81 4,995 4,480 4,140 Thickness Shrinkage (%) 5% max @(120 ± 5˚C)
15.88 x 1.02 5,030 4,515 4,170 Coefficient of moisture 10 (0.005) max
permeability (per 25mm in thickness)
19.05 x 1.14 4,697 4,181 3,895 ng/m2•s•Pa (g/m2•h•mmHg)
Working Temperature Up to 120oC

BCA COMPLIANCE
DEW POINT GRAPH
Pipe Insulation
This product has not been tested to AS1530.3 - Methods of fire
100
Relative Humidity (%)

test on building material components and structures. If a fire

retardant paircoil is required, MM Kembla recommends the use 80
of PairCoilMAX.
Copper 60
Dew formation
Manufactured to AS/NZS1571. Recommended maximum 40 line required
operating temperature is 65oC and in accordance with AS1677. by JIS A 9501
A/C manufacturer’s operating and installation instructions 20
should be consulted. 0

15 20 25 30 35 40
Ambient Temperature (˚C)

INSTALLATION
• K
 embla PairCoil copper tube is recommended to
MM, Kembla, MM Kembla and PairCoilMAX are trademarks of Metal Manufactures Ltd
be flare jointed. If brazing is necessary, all safety
For further information please contact your MM Kembla
precautions should apply. Refer to installation representative, customer service or visit our website.
instruction included with each Kembla PairCoil carton. MM Kembla, ABN 13 003 762 641
Gloucester Boulevarde,
• 
If tight bending is required, the insulation can be cut PO BOX 21, Port Kembla, NSW 2505
back to accommodate a tube bender. Alternatively T: 1800 804 631 F: 1800 817 846
E: [email protected]
a length of polyethylene tube can be inserted to www.kembla.com.au
prevent kinking.
MM Kembla New Zealand
263 Ti Rakau Drive, East Tamaki, Auckland, 2013
CAUTION: Product data, design details, performance figures, advice and PO Box 51 525, Pakuranga, Auckland, 2140
other information given herein (the “Information”) is provided only as a T: +64 9 274 0111 F: +64 9 274 0347
guide to available information. MM Kembla does not accept any liability E: [email protected]
whatsoever (including arising from negligence) for the accuracy of the
www.kembla.co.nz
Information and for injuries, expense or loss, which may arise as a result
of the use of the Information by the recipient. Technical Bulletin No: D63/20