Kapsabet Boys Physics f1 Qs 2023
Kapsabet Boys Physics f1 Qs 2023
Kapsabet Boys Physics f1 Qs 2023
PHYSICS FORM 1
OPENER ASSESSMENTS TERM 2 2023
NAME:_______________________________STREAM______DATE:_________
_
SCHOOL:_________________________________________________________
QUESTION PAPER
FORM ONE (1)
INSTRUCTIONS TO CANDIDATES
1. Write your name, index number, admission number and sign in the spaces provided above.
2. Answer all the questions in the spaces provided.
3. All workings must be clearly shown where applicable.
4. All numerical answers must be expressed in decimal form
5. Non-programmable silent electronic calculators and KNEC Mathematical tables may be used
where applicable.
TOTAL 50
Answer ALL the questions in the spaces provided
1. Give two ways in which physics is useful in the field of Medicine. ( 2 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
2. Why should one Never plug in foreign materials into electrical sockets? ( 1 mark)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
3. The mass of a bucket containing sand was found to be 12 kg. If the volume of the sand
was 2900 cm3 and that the mass of empty bucket was 0.3 kg, find the density of sand.
(3marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
Figure 1
(i) What makes the needle to float in (a)? (1 mark)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
(ii) Explain what would happen if the needle was placed vertically on the water surface
as in figure (b). (2 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
(b) If an object weighs 140 N on the planet, find its mass. (2 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
6. Explain why water on surface of glass smeared with oil forms droplets while on a clean
glass surface it spreads. (2 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
5. Figure 2 below shows two blocks A and B placed against a sphere on a metre rule:
Figure 2
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………………
6. Describe briefly how you would use a metre rule and a piece of thread to measure the radius of
a boiling tube. (4 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
7. A student recorded the following measurements while using a meter rule: 5.32 cm, 4.9 cm and
8.013 cm. Which is the correct reading? Explain your answer (2 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
(iii) Calculate the volume of 150 gm of the liquid ( 3 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
10. The volume of one drop of a liquid was found to be 0.045 ml. If 30 drops were delivered by
a burette from an initial reading of the liquid being 11.4 ml, find the final reading of the liquid.
(3 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
11. The mass of a density bottle filled with a liquid is recorded as 89.37 g. Given that the density
of the liquid is 1.21 g/cm3 and the capacity of the bottle is 50 ml, determine the mass of the
bottle. (4 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
Figure 3
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
13. A piece of plastic is moulded to form a cuboid of volume 24 cm3 . If the mould is made to
form a cylindrical shape of radius 0.7 cm, determine its height. (3 marks)
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
# END#