TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

RoHS Pb e3

Description
The SZSMF4L series is designed to protect sensitive systems or
components from high voltage, high energy transients. It offers a
fast response time, low zener impedance, high surge and excellent
clamping capabilities. Because of its small size, it is ideal for use in
automotive electronics applications

Features & Benefits

■ Zener transient overvoltage ■ IEC-61000-4-2 ESD 30 kV(Air),
suppressors 30 kV (Contact)
■ Working peak reverse voltage ■ Lead orientation in tape:
range 5 V to 78 V for uni- cathode lead to sprocket holes
directional and 10 V to 78 V for ■ These components are Pb-free
bi-directional and are RoHS compliant
■ Peak power: 400 watts @ 1 ms ■ SZ prefix for automotive and
Additional Information ■ Planar chip design with low other applications requiring
leakage current performance control change requirements;
■ Response time is typically < 1 AEC−Q101 qualified and PPAP
ns capable
■ ESD rating of class 3 (> 16 kV) ■ VBR @TJ = VBR@25°C x (1+αT
per human body model x (TJ - 25)) (αT: Temperature
Coefficient)
Resources Accessories Samples

Applications
Maximum Ratings & Thermal Characteristics
TVS components are ideal for the protection of I/O Interfaces, VCC
bus and other vulnerable circuits used in Automotive applications.
Parameter Symbol Value Unit
Maximum PPK dissipation (PW−10/1000 µs)
PPK 400 W
(Note 1)
DC power dissipation @ TA = 25 °C (Note 2) 385 mW Functional Diagram
PD 4.0
derate Above 25 °C mW/°C
Thermal resistance from junction to
RƟJA 150 °C/W
ambient (Note 2)
Thermal resistance from junction to lead
RƟJL 26 °C/W
(Note 3) Bi-directional
-55 to
Operating and storage temperature range TJ, Tstg °C
+175
Stresses exceeding maximum ratings may damage the component. Maximum ratings are stress ratings only. Cathode
Functional operation above the recommended operating conditions is not implied. Extended exposure to stresses Anode
above the recommended operating conditions may affect component reliability.
1. Non−repetitive current pulse at TA = 25 °C Uni-directional
2. Mounted with recommended minimum pad size, DC board FR−4.
3. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
 TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

Electrical Characteristics
Working Breakdown Maximum Maximum
Test
Peak Voltage VBR Maximum Reverse
Part Part Marking Current Clamping
Reverse Peak Leakage IR
Number Number (V) @ IT Voltage VC
Voltage IT Pulse Current @ VR
(Uni) (Bi) (Note 5) @ Ipp
VRWM (V) Ipp (A) (µA)
Uni Bi (Note 4) Min Max (mA) (V)
(Note 6)

SZSMF4L5.0AT1G - QE - 5.0 6.40 7.00 10 9.2 43.5 50

SZSMF4L6.0AT1G - QG - 6.0 6.67 7.37 10 10.3 38.8 50
SZSMF4L6.5AT1G - QK - 6.5 7.22 7.98 10 11.2 35.7 40
SZSMF4L7.0AT1G - QL - 7.0 7.78 8.60 10 12.0 33.3 40
SZSMF4L7.5AT1G - QN - 7.5 8.33 9.21 1 12.9 31.0 30
SZSMF4L8.0AT1G - QR - 8.0 8.89 9.83 1 13.6 29.4 5
SZSMF4L8.5AT1G - QT - 8.5 9.44 10.40 1 14.4 27.8 5
SZSMF4L9.0AT1G - QV - 9.0 10.00 11.10 1 15.4 26.0 2
SZSMF4L10AT1G SZSMF4L10CAT1G QX QXC 10 11.10 12.30 1 17.0 23.5 2
SZSMF4L11AT1G SZSMF4L11CAT1G QZ QZC 11 12.20 13.50 1 18.2 22.0 2
SZSMF4L12AT1G SZSMF4L12CAT1G RE REC 12 13.30 14.70 1 19.9 20.1 1
SZSMF4L13AT1G SZSMF4L13CAT1G RG RGC 13 14.40 15.90 1 21.5 18.6 1
SZSMF4L14AT1G SZSMF4L14CAT1G RH RHC 14 15.60 17.20 1 23.2 17.2 0.5
SZSMF4L15AT1G SZSMF4L15CAT1G RM RMC 15 16.70 18.50 1 24.4 16.4 0.5
SZSMF4L16AT1G SZSMF4L16CAT1G RP RPC 16 17.80 19.70 1 26.0 15.4 0.5
SZSMF4L17AT1G SZSMF4L17CAT1G RR RRC 17 18.90 20.90 1 27.6 14.5 0.5
SZSMF4L18AT1G SZSMF4L18CAT1G RT RTC 18 20.00 22.10 1 29.2 13.7 0.5
SZSMF4L20AT1G SZSMF4L20CAT1G RV RVC 20 22.20 24.50 1 32.4 12.3 0.5
SZSMF4L22AT1G SZSMF4L22CAT1G RX RXC 22 24.40 26.90 1 35.5 11.3 0.5
SZSMF4L24AT1G SZSMF4L24CAT1G RZ RZC 24 26.70 29.50 1 38.9 10.3 0.5
SZSMF4L26AT1G SZSMF4L26CAT1G SE SEC 26 28.90 31.90 1 42.1 9.5 0.5
SZSMF4L28AT1G SZSMF4L28CAT1G SG SGC 28 31.10 34.40 1 45.4 8.8 0.5
SZSMF4L30AT1G SZSMF4L30CAT1G SK SKC 30 33.30 36.80 1 48.4 8.3 0.5
SZSMF4L33AT1G SZSMF4L33CAT1G SM SMC 33 36.70 40.60 1 53.3 7.5 0.5
SZSMF4L36AT1G SZSMF4L36CAT1G SP SPC 36 40.00 44.20 1 58.1 6.9 0.5
SZSMF4L40AT1G SZSMF4L40CAT1G SR SRC 40 44.40 49.10 1 64.5 6.2 0.5
SZSMF4L43AT1G SZSMF4L43CAT1G ST STC 43 47.80 52.80 1 69.4 5.8 0.5
SZSMF4L45AT1G SZSMF4L45CAT1G SV SVC 45 50.00 55.30 1 72.7 5.5 0.5
SZSMF4L48AT1G SZSMF4L48CAT1G SX SXC 48 53.30 58.90 1 77.4 5.2 0.5
SZSMF4L51AT1G SZSMF4L51CAT1G SZ SZC 51 56.70 62.70 1 82.4 4.9 0.5
SZSMF4L54AT1G SZSMF4L54CAT1G TE TEC 54 60.00 66.30 1 87.1 4.6 0.5
SZSMF4L58AT1G SZSMF4L58CAT1G TG TGC 58 64.40 71.20 1 93.6 4.3 0.5
SZSMF4L60AT1G SZSMF4L60CAT1G TI TIC 60 66.70 73.70 1 96.8 4.1 0.5
SZSMF4L64AT1G SZSMF4L64CAT1G TM TMC 64 71.10 78.60 1 103.0 3.9 0.5
SZSMF4L70AT1G SZSMF4L70CAT1G TP TPC 70 77.80 86.00 1 113.0 3.5 0.5
SZSMF4L75AT1G SZSMF4L75CAT1G TR TRC 75 83.30 92.10 1 121.0 3.3 0.5
SZSMF4L78AT1G SZSMF4L78CAT1G TT TTC 78 86.70 95.80 1 126.0 3.2 0.5

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
 TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

Electrical Characteristics
Working Breakdown Maximum Maximum
Test
Peak Voltage VBR Maximum Reverse
Part Part Marking Current Clamping
Reverse Peak Leakage IR
Number Number (V) @ IT Voltage VC
Voltage IT Pulse Current @ VR
(Uni) (Bi) (Note 5) @ Ipp
VRWM (V) Ipp (A) (µA)
Uni Bi (Note 4) Min Max (mA) (V)
(Note 6)

SZSMF4L5.0AT3G - QE - 5.0 6.40 7.00 10 9.2 43.5 50

SZSMF4L6.0AT3G - QG - 6.0 6.67 7.37 10 10.3 38.8 50
SZSMF4L6.5AT3G - QK - 6.5 7.22 7.98 10 11.2 35.7 40
SZSMF4L7.0AT3G - QL - 7.0 7.78 8.60 10 12.0 33.3 40
SZSMF4L7.5AT3G - QN - 7.5 8.33 9.21 1 12.9 31.0 30
SZSMF4L8.0AT3G - QR - 8.0 8.89 9.83 1 13.6 29.4 5
SZSMF4L8.5AT3G - QT - 8.5 9.44 10.40 1 14.4 27.8 5
SZSMF4L9.0AT3G - QV - 9.0 10.00 11.10 1 15.4 26.0 2
SZSMF4L10AT3G SZSMF4L10CAT3G QX QXC 10 11.10 12.30 1 17.0 23.5 2
SZSMF4L11AT3G SZSMF4L11CAT3G QZ QZC 11 12.20 13.50 1 18.2 22.0 2
SZSMF4L12AT3G SZSMF4L12CAT3G RE REC 12 13.30 14.70 1 19.9 20.1 1
SZSMF4L13AT3G SZSMF4L13CAT3G RG RGC 13 14.40 15.90 1 21.5 18.6 1
SZSMF4L14AT3G SZSMF4L14CAT3G RH RHC 14 15.60 17.20 1 23.2 17.2 0.5
SZSMF4L15AT3G SZSMF4L15CAT3G RM RMC 15 16.70 18.50 1 24.4 16.4 0.5
SZSMF4L16AT3G SZSMF4L16CAT3G RP RPC 16 17.80 19.70 1 26.0 15.4 0.5
SZSMF4L17AT3G SZSMF4L17CAT3G RR RRC 17 18.90 20.90 1 27.6 14.5 0.5
SZSMF4L18AT3G SZSMF4L18CAT3G RT RTC 18 20.00 22.10 1 29.2 13.7 0.5
SZSMF4L20AT3G SZSMF4L20CAT3G RV RVC 20 22.20 24.50 1 32.4 12.3 0.5
SZSMF4L22AT3G SZSMF4L22CAT3G RX RXC 22 24.40 26.90 1 35.5 11.3 0.5
SZSMF4L24AT3G SZSMF4L24CAT3G RZ RZC 24 26.70 29.50 1 38.9 10.3 0.5
SZSMF4L26AT3G SZSMF4L26CAT3G SE SEC 26 28.90 31.90 1 42.1 9.5 0.5
SZSMF4L28AT3G SZSMF4L28CAT3G SG SGC 28 31.10 34.40 1 45.4 8.8 0.5
SZSMF4L30AT3G SZSMF4L30CAT3G SK SKC 30 33.30 36.80 1 48.4 8.3 0.5
SZSMF4L33AT3G SZSMF4L33CAT3G SM SMC 33 36.70 40.60 1 53.3 7.5 0.5
SZSMF4L36AT3G SZSMF4L36CAT3G SP SPC 36 40.00 44.20 1 58.1 6.9 0.5
SZSMF4L40AT3G SZSMF4L40CAT3G SR SRC 40 44.40 49.10 1 64.5 6.2 0.5
SZSMF4L43AT3G SZSMF4L43CAT3G ST STC 43 47.80 52.80 1 69.4 5.8 0.5
SZSMF4L45AT3G SZSMF4L45CAT3G SV SVC 45 50.00 55.30 1 72.7 5.5 0.5
SZSMF4L48AT3G SZSMF4L48CAT3G SX SXC 48 53.30 58.90 1 77.4 5.2 0.5
SZSMF4L51AT3G SZSMF4L51CAT3G SZ SZC 51 56.70 62.70 1 82.4 4.9 0.5
SZSMF4L54AT3G SZSMF4L54CAT3G TE TEC 54 60.00 66.30 1 87.1 4.6 0.5
SZSMF4L58AT3G SZSMF4L58CAT3G TG TGC 58 64.40 71.20 1 93.6 4.3 0.5
SZSMF4L60AT3G SZSMF4L60CAT3G TI TIC 60 66.70 73.70 1 96.8 4.1 0.5
SZSMF4L64AT3G SZSMF4L64CAT3G TM TMC 64 71.10 78.60 1 103.0 3.9 0.5
SZSMF4L70AT3G SZSMF4L70CAT3G TP TPC 70 77.80 86.00 1 113.0 3.5 0.5
SZSMF4L75AT3G SZSMF4L75CAT3G TR TRC 75 83.30 92.10 1 121.0 3.3 0.5
SZSMF4L78AT3G SZSMF4L78CAT3G TT TTC 78 86.70 95.80 1 126.0 3.2 0.5
4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak
operating voltage level
5. VBR measured at pulse test current IT at an ambient temperature of 25 °C.
6. For bidirectional type having VR of 10 volts and less, the IR limit is double.

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
 TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

I-V Curve Characteristics (TA = 25 °C unless otherwise noted, VF = 3.5 V Max. @ IF = 30 A)* For Uni-directional

I Symbol Parameter
Uni-directional
IPP Maximum Reverse Peak Pulse Current
VC Clamping Voltage @ IPP
VRWM Working Peak Reverse Voltage
IR Maximum Reverse Leakage Current @ VRWM
VBR Breakdown Voltage @ IT
Vc VBR VR
V
IR VF IT Breakdown Current Current
IT
VF Forward Voltage @ IF
IF Forward Current

*1/2 sine wave (or equivalent square wave), PW = 8.3 ms, non−repetitive duty cycle.
IPP

I-V Curve Characteristics (TA = 25 °C unless otherwise noted) For Bi-directional

I Symbol Parameter
Bi-directional
IPP Maximum Reverse Peak Pulse Current
IPP
VC Clamping Voltage @ IPP
VRWM Working Peak Reverse Voltage
IR Maximum Reverse Leakage Current @ VRWM
IT VBR Breakdown Voltage @ IT
Vc VBR VR IR
V IT Breakdown Current Current
IR VR VBR Vc
IT

IPP

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
 TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

Figure 1. Pulse Rating Curve Figure 2. 10/1000 µs Pulse Waveform

100000 Pulse width (tP) is defined

tr ≤ 10 µs as that point where the peak
Nonrepetitive pulse
waveform shown in current decays to 50 % of IRSM
PPK , Peak Power (W)

10000 figure 2.
TA = 25 ˚C 100
Peak Value - IPP

Value (%)
1000
IPP
Half value -
50 2
100

tP
10
0.0001 0.001 0.01 0.1 1 10 0
0 1 2 3 4 5
tp, Pulse Width (ms)
t, Time (ms)

Figure 3. Typical Junction Capacitance vs. Bias Voltage Figure 4. Surge Derating Curve

100
10000
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %

Uni-direconal V = 0V 80
1000
Bi -direconal V = 0V
Cj (pF)

60
Uni -direconal V = V R
100
40
Bi -direconal V = V 
10
20

1 0
1 10 100 1,000 0 25 50 75 100 125 150 175
VRWM - Working Peak Reverse Voltage (V)
TJ - Initial Junction Temperature ( ij)

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
 TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

Soldering Parameters

Reflow Condition Lead–free assembly

- Temperature Min (Ts(min)) 150 °C
tp
Pre Heat - Temperature Max (Ts(max)) 200 °C TP

- Time (min to max) (ts) 60 – 120 seconds Ramp-up Critical Zone

TL to TP
Average Ramp Up Rate (Liquidus Temp (TL) to Peak 3 °C/second max TL tL

TS(max) to TL - Ramp-up Rate 3 °C/second max

Temperature (T)
Ts(max)

- Temperature (TL) (Liquidus) 217 °C Ramp-down

Reflow Ts(min)
- Time (min to max) (ts) 60 – 150 seconds ts
Preheat
Peak Temperature (TP) 260+0/-5 °C
Time within 5 °C of Actual Peak Temperature (tp) 30 seconds max
25˚C
t 25˚C to Peak
Ramp-down Rate 6 °C/second max
Time (t)
Time 25 °C to Peak Temperature (TP) 8 minutes max
Do Not Exceed 260 °C

Physical Specifications Environmental Specifications

Weight 0.006 ounce, 0.0171 grams High temperature storage JESD22-A103
Case JEDEC SOD−123FL HTRB JESD22-A108
Polarity Color band denotes cathode for unidirectional components Temperature cycling JESD22-A104
Terminal Matte Tin-plated leads, solderable per JESD22-B102 MSL JEDEC-J-STD-020, Level 1
H3TRB JESD22-A101
RSH JESD22--A111

Dimensions

E
Millimeters Inches
Dim
Min Nom Max Min Nom Max
D
1 2
A 1.20 1.30 1.40 0.047 0.051 0.055
A1
A A1 0.00 0.05 0.10 0 0.002 0.004
Top View
End View b 1.10 1.20 1.30 0.043 0.047 0.051
c 0.10 0.17 0.25 0.004 0.007 0.01
D 2.25 2.35 2.45 0.089 0.093 0.096
E 3.25 3.35 3.45 0.128 0.132 0.136
HE c
Side View L 0.35 0.47 0.60 0.014 0.019 0.024
2X HE 3.75 3.85 3.95 0.148 0.152 0.156
L
Ɵ 2° − 8° 2° − 8°
2X b

Bottom View Packaging Options

Packaging
Device Package Quantity
Soldering Footprint Option
SOD−123FL Tape & Reel -
4.20 SZSMF4LxxXXT1G 1,500
2X (Pb−Free) 12 mm tape / 7” reel
1.30 SOD−123FL Tape & Reel -
SZSMF4LxxXXT3G 5,000
(Pb−Free) 12 mm tape / 13” reel
2X 1.40

Dimensions: Millimeters

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
 TVS Diodes Datasheet

SZSMF4L Series
Automotive, Surface Mount 400 W in SOD-123FL

Part Numbering System Part Marking System

SZ SMF4L xx CA T1 G Cathode band for uni-directional

products only
Pb Free Plating
LFXXXX
Tape & Reel Designator 1 2
T1 7 “ Reel YMAWW
T3 13 “ Reel
Type Code
A Uni Directional TVS XXX =Device Code
CA Bi Directional TVS Y =Year
M =Month
VR Voltage
A =Assembly Location
Series Name WW =Lot Code
Zener Automotive

Tape and Reel Specification

0.157
(4.0)

0.47
(12.0)
Cathode

0.157 0.059 DIA Cover tape

(4.0) (1.5)
Optional
7” 7.0 (178)
13” 13.0 (330)
Dimensions are in inches
0.80 (20.2) (and millimeters).
Arbor Hole Dia.

Direction of Feed
0.49
(12.5)

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.

© 2023 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: GD. 08/22/23
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Littelfuse:

SZSMF4L11CAT1G SZSMF4L12AT1G SZSMF4L12CAT1G SZSMF4L13AT1G SZSMF4L13CAT1G

SZSMF4L14AT1G SZSMF4L75CAT3G SZSMF4L78AT3G SZSMF4L78CAT3G SZSMF4L8.0AT3G
SZSMF4L8.5AT3G SZSMF4L9.0AT3G SZSMF4L64CAT3G SZSMF4L7.0AT3G SZSMF4L7.5AT3G
SZSMF4L70AT3G SZSMF4L70CAT3G SZSMF4L75AT3G SZSMF4L58CAT3G SZSMF4L6.0AT3G
SZSMF4L6.5AT3G SZSMF4L60AT3G SZSMF4L60CAT3G SZSMF4L64AT3G SZSMF4L5.0AT3G SZSMF4L51AT3G
SZSMF4L51CAT3G SZSMF4L54AT3G SZSMF4L54CAT3G SZSMF4L58AT3G SZSMF4L43AT3G
SZSMF4L43CAT3G SZSMF4L45AT3G SZSMF4L45CAT3G SZSMF4L48AT3G SZSMF4L48CAT3G
SZSMF4L33AT3G SZSMF4L33CAT3G SZSMF4L36AT3G SZSMF4L36CAT3G SZSMF4L40AT3G
SZSMF4L40CAT3G SZSMF4L26AT3G SZSMF4L26CAT3G SZSMF4L28AT3G SZSMF4L28CAT3G
SZSMF4L30AT3G SZSMF4L30CAT3G SZSMF4L20AT3G SZSMF4L20CAT3G SZSMF4L22AT3G
SZSMF4L22CAT3G SZSMF4L24AT3G SZSMF4L24CAT3G SZSMF4L16AT3G SZSMF4L16CAT3G
SZSMF4L17AT3G SZSMF4L17CAT3G SZSMF4L18AT3G SZSMF4L18CAT3G SZSMF4L13AT3G
SZSMF4L13CAT3G SZSMF4L14AT3G SZSMF4L14CAT3G SZSMF4L15AT3G SZSMF4L15CAT3G
SZSMF4L10AT3G SZSMF4L10CAT3G SZSMF4L11AT3G SZSMF4L11CAT3G SZSMF4L12AT3G
SZSMF4L12CAT3G SZSMF4L75CAT1G SZSMF4L78AT1G SZSMF4L78CAT1G SZSMF4L8.0AT1G
SZSMF4L8.5AT1G SZSMF4L9.0AT1G SZSMF4L64CAT1G SZSMF4L7.0AT1G SZSMF4L7.5AT1G
SZSMF4L70AT1G SZSMF4L70CAT1G SZSMF4L75AT1G SZSMF4L58CAT1G SZSMF4L6.0AT1G
SZSMF4L6.5AT1G SZSMF4L60AT1G SZSMF4L60CAT1G SZSMF4L64AT1G SZSMF4L5.0AT1G SZSMF4L51AT1G
SZSMF4L51CAT1G SZSMF4L54AT1G SZSMF4L54CAT1G SZSMF4L58AT1G SZSMF4L43AT1G
SZSMF4L43CAT1G SZSMF4L45AT1G SZSMF4L45CAT1G