Boq

Schedule A
Name of the work : Construction of Greenfield No frills Airport at Orvakal in Kurnool district (A.P.) (Package – 2)
APSS/ Rate
Sl. No Quantity Description of work Unit
MORTH Figure
I. Name of sub work : ESTIMATE FOR PASSENGER TERMINAL BUILDING
1 36.00 Flooring with 16 to 18mm thick high polished granite stone slabs other than APSS 1 Sqm ( 3,929.00)
black and regular colours (i.e. of shades like paradiso / bala flower / copper
silk / laka red / lavender blue) with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement slurry of honey
like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement
paste mixed with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges, polishing
charges and all other taxes on all materials, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 & special) First
Storey
2 8.50 Flooring with 16 to 18 mm thick high polished granite stone slabs black APSS 1 sqm ( 4,010.00)
colour as approved by the Engineer-in-Charge of length not less than 2.43 mts
set over base coat of cement mortar (1:8) , 20mm thick using screened sand
over CC bed already laid or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white
cement paste mixed with pigment of matching shade to full depth including
cost and conveyance of all materials like cement , sand , water , granite slabs
etc., to work site and all operational, incidental labour & lift charges, half
rounding the edge , polishing charges and all other taxes on all materials, cost
of base coat and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special) First Storey
3 187.20 Flooring with chequered cement concrete heavy duty tiles confirming to IS: APSS 1 Sqm ( 699.00)
13801 using aggregates, cement, pigments of size 300mm x 300mm and
thickness 25mm of any shade as approved by Engineer - In - Charge set over
base coat of cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of honey like
consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to
full depth mixed with pigment of matching shade including cost and
conveyance of all materials like cement, sand, water and tiles etc.,and
overheads & contractors profit complete for finished item of workFirst Storey.
4 385.05 Providing dadooing to walls with glazed full body ceramic tiles of any size and APSS 1 Sqm ( 657.00)
thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712,
IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with
borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12
mm thick using screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white cement paste
mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work. First Storey
5 118.54 Supplying and fixing of stainless steel ( grade 304 ) hand railing as per APSS 1 Sqm ( 4,954.00)
approved drawing with top rail of 50mm dia pipe and 2mm thick medium class
and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each
step fixed with base plate of 75mm dia using bonding agent and anchor
fastner and welding, drilling of 20mm dia holes with pneumatic compressor
for fixing railing, buffing, polishing all members of the railing thouroughly ,
lacquer finishing to present seamless finish including cost and conveyance of
all materials, electrodes, welding charges, cost of all consumables, labour
charges , overheads & contractors profit etc., complete for finished item of
work.
6 396.12 Providing and applying Wall putty of White Cement or Polymer or Cement APSS 1 Sqm ( 197.00)
based of average 1 to 2 mm thickness over plastered surface to prepare the
surface even and smooth after thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying knifing paste filler by putty knife
/ muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for
the surface preparation including cost and conveyance of all materials to work
site and all operational, incidental, labour charges, over heads and contractors
profit etc., complete for finished item of work in all floors for Internal walls
7 594.75 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture APSS 1 Sqm ( 246.00)
of average 2 to 3 mm thickness over plastered surface to prepare the surface
even and smooth after thoroughly brushing the surface to remove all dirt and
remains of loose powdered materials, applying emery paper, Sand the surface,
clean & wipe off loose dust, applying putty/ texture paint filler by putty knife /
muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost
and conveyance of all materials to work site and all operational, incidental,
labour charges, scaffolding charges, overheads and contractors profit etc.,
complete for finished item of work in all floors for external walls
8 1598.73 Supply & application of one coat water based cement primer of interior grade I APSS 1 Sqm ( 131.00)
and two coats of acrylic emulsion paint having VOC (Volatile Organic
Compound) content less than 50 grams/litre for internal walls including cost
and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors.
9 1077.45 Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic APSS 1 Sqm ( 89.00)
Compound) content less than 50 grams/litre to new iron work including cost
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
10 9.00 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic APSS 1 Sqm ( 136.00)
Compound) content less than 50 grams/litre over primer coat of red oxide to
new iron work including cost and conveyance of all materials to site, sales &
other taxes, incidental, operational and all labour charges etc., and overheads
& contractors profit complete for finished item of work in all floors. (SS No.
1201, 1212 & 1207).
11 161.87 Supplying and fixing Gyp Board Suspended regular single layer false ceiling APSS 1 Sqm ( 969.00)
(GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993
fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web)
of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/
partition at 610 mm c/c and suspending the frame work using Intermediate
channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with
ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel
expansion fasteners & connecting clip to the ceiling channels (with knurled
web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction
perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5
mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c &
jointing and finishing using joint compound and paper tape to have a flush
look including filling the tapered & square edges with jointing compound, two
coats of drywall topcoa including overheads and contractor profit etc., complete
for finished item of work
12 59.22 Centering and shuttering including strutting, propping etc. and removal of DSR 1 sqm ( 422.30)
form for :Shelves (Cast in situ)
13 3.20 Providing and laying in position ready mixed M-25 grade concrete for DSR 1 cum ( 7,517.20)
reinforced cement concrete work, using cement content as per approved design
mix, manufactured in fully automatic batching plant and transported to site of
work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for reinforced cement
concrete work, including pumping of R.M.C. from transit mixer to site of laying
, excluding the cost of centering, shuttering finishing and reinforcement,
including cost of admixtures in recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve workability without impairing
strength and durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less
cement used as per design mix is payable/recoverable separately).All works
above plinth & up to floor V level.
14 2.45 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded DSR 1 sqm ( 3,351.95)
and prepolished, machine cut for kitchen platforms, vanity counters, window
sills , facias and similar locations of required size, approved shade, colour and
texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels.Granite of any colour and shade--
Area of slab upto 0.50 sqm
15 49.52 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., DSR 1 Metre ( 245.70)
including machine polishing to edge to give high gloss finish etc. complete as
per design approved by Engineer-in-Charge.granite work Shelves in toilet
16 22.51 Extra for fixing marble /granite stone, over and above corresponding basic DSR 1 Metre ( 266.25)
item, in facia and drops of width upto 150 mm with epoxy resin based
adhesive, including cleaning etc. complete.
17 22 Extra for providing opening of required size & shape for wash basin/ kitchen DSR 1 each ( 427.95)
sink in kitchen platform, vanity counter and similar location in marble/
Granite/stone work, including necessary holes for pillar taps etc. including
moulding, rubbing and polishing of cut edges etc. complete.
18 2.63 Providing and fixing machine cut, mirror / eggshell polished , Marble stone DSR 1 Sqm ( 6,647.35)
work for wall lining (veneer work) including dado, skirting, risers of steps etc.,
in required design and pattern wherever required, stones of different finished
surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3
oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including
pointing with white cement slurry admixed with pigment of matching shade,
including rubbing, curing, polishing etc. all complete as per Architectural
drawings, and as directed by the Engineer-in-Charge.
a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or
Dark Emperadore etc.
19 29.00 Providing and fixing aluminium extruded section body tubular type universal DSR 1 Each ( 388.40)
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the
body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000
mm), with double speed adjustment with necessary accessories and screws etc.
complete.
20 54.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic DSR 1 Each ( 88.10)
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete :250x10 mm
21 4.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic DSR 1 Each ( 64.30)
required colour or shade, with necessary screws etc. complete 150x10 mm
22 4.00 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating DSR 1 Each ( 51.10)
not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour or shade, with necessary screws etc. complete :125 mm
23 27.00 Providing and fixing aluminium hanging floor door stopper, ISI marked, DSR 1 Each ( 38.00)
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade, with necessary screws etc.
complete.Twin rubber stopper
24 4.50 Sqm ( 3,250.51)
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed
25 78.63 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness DSR 1 Sqm ( 688.35)
to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of
approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid
on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching
pigment etc, complete.
26 13.20 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes RM ( 148.75)
conforming to IS : 13592 Type A, including jointing with seal ring conforming
to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed
pipes.
27 4.00 Providing and fixing on wall face unplasticised - PVC moulded fittings/ each ( 66.10)
accessories for unplasticised Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving
10 mm gap for thermal expansion.
28 4.00 Providing and fixing to the inlet mouth of rain water pipe PTMT (an each ( 66.45)
Engineering Thermoplastic) grating square (Slit) 150 mm square with a height
of 8 mm and weighing not less than 100 gms.
29 508.00 Providing and fixing aluminium work for doors, windows, ventilators and DSR 1 Kg ( 384.50)
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required
EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be
paid for separately) :For fixed portion Powder coated aluminium (minimum
thickness of powder coating 50 micron)
30 520.00 For shutters of doors, windows & ventilators including providing and fixing DSR 1 Kg ( 444.90)
hinges/ pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket required (Fittings shall
be paid for separately)-Powder coated aluminium (minimum thickness of
powder coating 50 micron)
31 30.16 Providing and fixing 12 mm thick prelaminated particle board flat pressed DSR 1 Sqm ( 866.60)
three layer or graded wood particle board conforming to IS: 12823 Grade l Type
ll, in panelling fixed in aluminum doors, windows shutters and partition
frames with C.P. brass / stainless steel screws etc. complete as per
architectural drawings and directions of engineer-in-charge.-Pre-laminated
particle board with decorative lamination on both sides
32 8.10 Providing and fixing glazing in aluminium door, window, ventilator shutters DSR 1 sqm ( 741.50)
and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per
the architectural drawings and the directions of engineer-in-charge.With float
glass panes of 4.0 mm thickness
33 7.35 Providing and fixing glazing in aluminium door, window, ventilator shutters DSR 1 Sqm ( 1,003.95)
34 12.00 Providing and fixing glazing in aluminium door, window, ventilator shutters DSR 1 Sqm ( 1,153.90)
the architectural drawings and the directions of engineer-in-charge With float
glass panes of 8 mm thickness
35 189.40 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone DSR 1 Metre ( 62.45)
work by providing weather silicon sealant over backer rod of approved quality
as per architectural drawings and direction of Engineer-in-charge complete.
Upto 5mm depth and 5 mm width
36 27.00 Providing and fixing 100mm brass locks (best make of approved quality) for DSR 1 Each ( 359.00)
aluminium doors including necessary cutting and making good etc. complete.
37 1.00 Providing and fixing aluminium casement windows fastener of required length DSR 1 Each ( 55.50)
for aluminium windows with necessary screws etc. complete.Powder coated
minimum thickness 50 micron aluminium
38 20.00 Providing and fixing aluminium round shape handle of outer dia 100 mm with DSR 1 Each ( 68.30)
SS screws etc. complete as per direction of Engineer-in-chargePowder coated
39 5551.00 Providing and supplying aluminium extruded tubular and other aluminium DSR 1 Kg ( 338.25)
sections as per the architectural drawings and approved shop drawings, the
aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super
durable powder coating of 60-80 microns conforming to AAMA 2604 of required
colour and shade as approved by the Engineer-in-Charge. (The item includes
cost of material such as cleats, sleeves, screws etc. necessary for fabrication of
extruded aluminium frame work. Nothing extra shall be paid on this account).
---
40 31.10 Extra for openable side / top hung vision glass panels (IGUs) including DSR 1 Sqm ( 3,941.60)
providing and supplying at site all accessories and hardwares for the openable
panels as specified and of the approved make such as heavy duty stainless
steel friction hinges, min 4 -point cremone locking sets with stainless steel
plates, handles, buffers etc. including necessary stainless steel screws/
fasteners, nuts, bolts, washers etc. all complete as per the Architectural
drawings, as per the approved shop drawings, as specified and as directed by
the Engineerin- Charge.
41 17 Providing and fixing Greenlam / Merino Sturdo Classique Evergreen Toilet NS each ( 32,381.00)
cubicle (of following standard dimensions which includes 600 mm door size
width) made of heat, bacteria, water, chemical, scratch, impact and anti
bacterial resistant 12mm thick solid compact laminate panels tested by
Shriram Test House. Finish of the compact laminate should be suede / raw
Silk which includes doors, pilasters and intermediate panels finished with
approved textures / shade as per the detailed drawings and as per IS 2046
(Indian Standard) and as per Fire Retardent BS -476 / 97 Standard. The
product should have green guard certificate.his also includes providing and
fixing in position necessary hardware made out of stainless steel (Grade 304)
as per manufacturer's specifications and Architect's Instructions like Door
knob, gravity hinges, thumb turn lock set with occupancy indicators, coat
hooks with door stoppers, U channels, adjustable foot / padestal, top rail with
corner contactor, rubber noise deafening tape and screws and wall plugs etc. -
The top fitting should consist of SS round top rail which will get fixed with
pilasters, with ss panel tube holder, SS corner bend (connected with top rail)
will be used on the corner of cubicle in absence of brick wall, SS wall fixing is
used only on the wall which will hold the SS top rail.-This also includes ( 1)
providing and fixing in position necessary hardware made out of stainless steel
(Grade 304) as per manufacturer's specifications and Architect's Instructions
like Door knob, gravity hinges, thumb turn lock set with occupancy indicators,
coat hooks with door stoppers, U channels, adjustable foot / padestal, top rail
with corner contactor, rubber noise deafening tape and screws and wall plugs
etc. -The top fitting should consist of SS round top rail which will get fixed with
used only on the wall which will hold the SS top rail.-All screws will be of 304
grade in stainless steel with satin finish. All pilasters are supported by
stainless steel, bottom cladding. The base of the stainless steel bottom cladding
will be anchored to the floor with a clear height upto 150 mm.--Toilet cubicle
with a standard dimension of 2025 mm height x 1000 mm width x 1550 mm
depth which includes 600 mm door size width.
42 119.48 Supply and fixing of 75 mm thk. AEROCON panels of size 2400/2700/3000 NS 1 Sqm ( 2,000.00)
mm length and 600 mm wide having Tongue & Groove joint system for walls
and partitions with a density of 780 kg/cum having K value : 0.21 W/mK,
Axial load/metre width : 83 KN/m having a fire rating of 120 minutes and 36
db sound insulation.
The panels are made of two fibre reinforced cement sheets enclosing a light
weight aerated concrete core composed of cement & binders. The fibre
reinforced cement sheets are confirming to IS 13000--1990 / IS 14862-2000 .
These panels need to meet transverse load & modulus of rupture requirements
as per ASTM-E-72:98 & IS 2380 Part 4. The AEROCON panels should be
supported with a rigid frame of MS Steel hollow section with height more than
4.5 m and length of wall more than 4.5 m, or as per drawings including G.I
floor channel of 1 mm thick, 150 gsm GI coated and size 14x75x25 mm and
ceiling channel of 1 mm thick, 150 gsm GI coated and of size 38x75x38 mm.
The panels to be jointted with resin based glue mixed with hardner
(SmartBond) for jointing tongue & groove of refabricated panels and glass fibre
reinforced mesh tape 16 mm wide to be surfacially fitted at joint and finished
with resin based jointing compound 100 mm wide--The rate include all
material , labour, T &P, scaffolading folding etc. complete in respect as per
drawings and as per site requirement as dircted by enginee-in-charge..
43 1002.40 Providing and fixing anodised aluminium grill in ceiling (anodised transparent NS 1 Kg ( 400.00)
or dyed to required shade according to IS: 1868 with minimum anodic coating
of grade AC 15) of approved design/pattern, with approved standard section
and fixed to the existing frame with C.P. brass/ stainless steel screws including
cutting the grill to proper size, all complete as per site requirement and
direction of Engineer-in-charge. (Only weight of grill to be measured for
payment).
44 150.00 Provinding & fixing 2 mm thick solid Polycarbonate sheet in roofing on the NS 1 Sqm ( 2,500.00)
exiting truss steel structure. The sheet shall be fixid using self drilling/ self
tayping screws with EPDM sheet exluding the cost of purlins, rafters & trusses
& including cutting of size and shape wherever required complete in all respect
as per drawing & as per instruction of engineer-in-charge--Area .
45 342.00 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 160 NS 1 Rmt ( 430.00)
mm dia conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single
socketed pipes.
46 18.00 Providing and fixing on wall face unplasticised - PVC moulded 160 mm shoe for NS 1 Each ( 315.00)
unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for
thermal expansion.
47 36.00 Providing and fixing on wall face unplasticised - PVC moulded 160 mm bend NS 1 Each ( 300.00)
for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for
thermal expansion.
48 108.00 Providing and fixing Aluminium composite panel in metalic colour of apporoved NS 1 Sqm ( 5,000.00)
shades made out of 4 mm thick aluminium composite panel material
consisting of 3mm thick FR grade mineral core sandwiched between two
Aluminium sheets (each 0.5mm thick). The aluminium composite panel
cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumiflon
based fluoropolymer resin coating of approved colour and shade on face # 1
and polymer (Service) coating on face # 2 as specified using stainless steel
screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
for flase ceiling of approved quality complete including providing & fixing of
frame work made of special sections, power pressed from MS sheet and
glavnised with zinc coating of 120 gms/sqm (both side inclusive)as per IS 277,
one and fixed to the celing with dash fastner with bolt, other and fixed to the
hangers of required size and length with nuts bolts of required size and other
of the hangers fix with entermidiate channel running at the rquired spaching
to with the sealing section sel be fix in a diirection to pependicular to
intermidiate channel with conecting clips of GI wires at every junction,
including fixing perimetre channel, the perimeter of ceiling fix to the
wall/Partitions with help of rawl plugs with dry wall screws including fixing of
ACP to ceiling section and perimeterchannel with help of dry wall screws
complete including the cost of making opening for light fitting, grills, diffusers,
cutout made with frame of perimetre channel suitably fixed, complete in all
respects as per drawing, specifications, site requirement and as directed by
Engineer-in-charge
49 4.44 Providing and fixing of 6mm thick lacquer glass Planilaque glass of approved NS 1 sqm ( 4,000.00)
color by architect/ Client with clear neutral silicon on 12mm thick partical
board already fixed. The Planilaque lacquered glass to be of 6mm thick highly
durable, humid resistance, poly urethane lacquer glass complete in all respect
as per architectural drawings and direction of the engineer-in-charge /
Architect.
50 6.05 Providing and fixing corian stone on counter on shops on 12mm thick partical NS 1 sqm ( 7,500.00)
board already fixedas per the drawing / design provided by the architect
including moulding on three sides as per site requrement complete in all
reapect as directed by Engineer-in-charge.
51 Sqm
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of
size 600x600 and 0.5 mm thick with 25 mm height, made of G I
sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and
1146.54 ( 1,527.25)
20% perforation area with 1.8 mm dia holes and having NRC of 0.5,
electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending and perforation.
52 4.00 Proving & fixing counter of 12mm thick pre-laminated particle board Job ( 7,500.00)
with decorative laminations on both sides on three sides and top eith
2 No. drawers complete including fittings ie handle, powder caoted
telescopic drawer channel etc. in the retail shops complete in all
respect as per drawings and site requirement as directed by
Engineer-in-charge.
Approx. size 1000x600x750 mm
53 2.00 Approx. size 1600x600x750 mm Job 10000
D). SUB ESTIMATE FOR SIGNAGE WORKS

SUBHEAD I- EXTERNAL SIGNAGES
Note : Precedence of language to be inscribed on various Signage shall be
as under:
1. National (Hindi) language
2. Regional language 3. International (English) language
Providing, Supplying & fixing of Sign Boards made of S-304 grade Stainless
steel Pipes with braces of SS grade S-304 of square pipe flats rectangular
section etc. including , cutting argon welding polishing, buffing complete with
necessary holes nuts, bolts & caps, anchor plates of SS grade ASTM – 304 as
per size , drawing and to the satisfaction of Engineer in charge. The Signage
Substrate shall be of 4mm ACP sheet with face fully covered by RETRO
REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages with overlay
sheeting / HIGH INTENSITY PRISMATIC GRADE Type IV / Cast Vinyl to be
fixed with Very High Bond tape of 24mm wide and 2.3mm thick, to the back
support frame of 19mm X 24mm X1.2mm thick SS Rectagular Pipe. Complete
with desired foundations ( as per details ) including Excavation PCC1:4:8, RCC
1:2:4 , Center shuttering , Foundation bolts and curing . All stainless steel
items shall be of S-304 Grade ( EXTERNAL SIGNAGES) (Material should be in
compliance with Code of practise for Road signs, Indian Road congress 2010,
IRC-67-2010)
54 5 (Design Nos. 1 ) Providing, Supplying & fixing Single sided Sign Board of NS 1 Nos. 72000
size 1930mm x 1320mm (50mm dia SS pipe of S-304 grade 1.6mm thick) with
inner frame of 1830mm x 1220mm ( of 19 mm x 24mm rectangular, 1.20mm
thick SS pipe of S-304 Grade) along with diagonal support also of 19mm x
24mm rectangular, 1.20mm thick SS pipe of S-304 Grade, with sign substrate
of 1830mm x 1220mm of 4mm ACP sheet with face fully covered by RETRO
REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages and symbols
accordingly, fixed to inner frame with the help of Very High Bond tape of 24mm
wide and 2.3mm thick. The board shall have a leg support of 168mm dia 3mm
thick SS pipe of S-304 grade of height 4420mm, with necessary holes, nuts
bolts & caps. The boards shall be grouted in a foundation size of 1200mm x
900mm x 900m with CC 1: 2: 4 laid with the help of shuttering. All relevant
specs to confirming to detail drawing enclosed.
55 4 (Design Nos. 2) Providing, Supplying & fixing Single sided Sign board of NS 1 Nos. 34000
size 974mm x 1284mm ( 32mm dia SS pipe of S-304 grade 1.6mm thick ).
with inner frame of 910mm x 1220mm (of 19mm x 24mm rectangle, 1.2mm
Thick SS pipe of S-304 Grade ) along with diagonal support also of 19mm x
24mm sectangle, 1.2mm Thick SS pipe of S-304 Grade, with sign substrate of
size . 910mm x 1220mm, of 4mm ACP sheet with face fully covered with
RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and
symbols accordingly, fixed to inner frame of 910mm x 1220mm of ( 19mm x
24mm square, 1.2mm Thick SS pipe of S-304 Grade ) with the help of Very
High Bond tape of 24mm wide and 2.3mm thick. .The board shall have a one
leg support of 60mm dia 2mm thick SS pipe of S-304 grade of height 4.084m
with Hold fast The boards shall be grouted in a foundation size of 600mm x
600mm x 900mm with CC 1: 2: 4 laid with the help of shuttering Complete. All
relevant specs confirming to detail drawing enclosed.
56 3 (Design Nos. 3) Providing Supplying & fixing Double Sided Sign board of NS 1 Nos. 75000
size 1930mm x 1320m ( 50mm dia SS pipe of S-304 grade 1.6mm). with inner
frame of 1830mm x 1220mm (of 19mm X 24mm X 1.2mm thick Rectangular
SS pipe of S-304 Grade ) along with diagonal support also of 19mm X 24mm X
1.2mm thick Rectangular pipe of S-304 Grade, with sign substrate of size
1830mm x 1220mm, of 4mm ACP with face fully covered by RETRO
REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and symbols
accordingly, fixed to inner frame of 1830mm x 1220mm of (19mm X 24mm X
1.2mm Thick Rectangular pipe of S-304 Grade ) with the help of Very High
Bond tape of 24mm wide and 2.3mm thick. .The board shall have a two leg
support of 73mm dia 2mm thick SS pipe of S-304 grade of height 4.04m and
3.4mmm respectively, with necessary holes, nuts bolts & caps. The boards
shall be fixed on two nos. foundations of size 900mm x 900mm x 1200m with
CC 1:2:4 laid with the help of shuttering. All relevant specs confirming to detail
drawing enclosed.
57 3 (Design Nos. 4) Providing, Supplying & fixing Single sided Sign board of NS 1 Nos. 28000
size 974mm x 673mm & 974mm x 368mm ( 32mm dia SS pipe of S-304 grade
1.6mm thick ). with inner frame of 910mm x 610mm & 910mm x 304mm (of
19mm x 24mm rectangular , 1.2mm Thick SS pipe of S-304 Grade ), with sign
substrate of size 910mm x 610mm & 910mmx 304mm, of 4mm ACP with face
fully covered with RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting,
and messages and symbols accordingly, fixed to inner frame of 910mm x
610mm & 910mmx 304mm of ( 19mm x 24mm square, 1.2mm Thick SS pipe
of S-304 Grade ) with the help of Very High Bond tape of 24mm wide and 2.3
mm thick .The board shall have a one leg support of 60mm dia 2mm thick SS
pipe of S-304 grade of height 2840mm with Hold fast The boards shall be
grouted in a foundation size of 600mm x 600mm x 600mm with CC 1: 2: 4 laid
with the help of shuttering Complete. All relevant specs confirming to detail
drawing enclosed.
58 2 (Design Nos. 5) Providing, Supplying & fixing Single sided Sign board of size NS 1 Nos. 94000
1320mm x 2540mm ( 50mm dia SS pipe of S-304 grade 1.6mm thick ). with
inner frame of 1220mm x 2440mm (of 19mm x 24mm rectangle, 1.2mm Thick
SS pipe of S-304 Grade ) along with diagonal support also of 19mm x 24mm
rectangle, 1.2mm Thick SS pipe of S-304 Grade, with sign substrate of size
1220mm x 2440mm, of 4mm ACP with face fully covered by RETRO
REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and symbols
accordingly, fixed to inner frame of 1220mm x 2440mm of ( 19mm x 24mm
rectangle, 1.2mm Thick SS pipe of S-304 Grade ) with the help of Very High
Bond tape of 24mm wide and 2.3mm thick. .The board shall have a one leg
support of 168mm dia 3 mm thick SS pipe of S-304 grade of height 5000 mm
with base plate of 10mm thick SS plate of size 600mm x 600mm with 4 Nos.
stiffeners of 10mm SS plate of S-304 grade. The boards shall be fixed on a
foundation size of 1500mm x 900mm x 900mm with CC 1: 2: 4 laid with the
help of shuttering and 12 Nos. of foundation bolts of 20mm dia SS, S-304
grade of 600mm length Complete. All relevant specs confirming to detail
drawing enclosed.
59 4 WALL/ PILLAR MOUNTED NS 1 Nos. 6900

(Design Nos. 7) Providing, Supplying & fixing Single sided Sign Board of
size 450 mm x 600 mm with suitable inner frame and proper support, with
sign substrate of suitable size of 4mm ACP sheet with face fully covered by
RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages and
symbols accordingly, fixed to inner frame with the help of Very High Bond tape
of 24mm wide and 2.3mm thick. The board is to be fixed on RCC wall/pillar
with dash fasteners of SS pipe of S-304 grade. All stainless steel items shall be
of S-304 Grade ( EXTERNAL SIGNAGES) (Material should be in compliance
with Code of practise for Road signs, Indian Road cingress 2010, IRC-67-2010)
60 35 SUBHEAD II- OVERHEAD GANTRY Providing, Supplying & fixing of Single NS 1 Sqmt. 14000
Sided Overhead Retro Reflective Sign Boards made of 4mm thick ACP Sheet
with face fully covered by RETRO REFLECTIVE MICRO PRISMATIC Type IV
Sheeting and messages with overlay sheeting, with support frame structure of
suitable size along with vertical support of 19mm X 24mm X 1.2mm thick
Rectangular pipe of S-304 Grade, with signage fixed with Very High Bond tape
of 24mm wide and 2.3mm thick and rivets. Size of the board should be as per
road width. All relevant specification confirming to detail drawing enclosed.
61 2000 Fabrication Supplying & Erecting of Over Head Gantry structure made of NS 1 kg 98
steel work in built up tubular (round, square or rectangular hollow tubes etc.
trusses etc. including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer, including welding and bolted with
special shaped washers etc. complete : Hot finished seamless type tubes.
The whole gantry shall be painted with 2 Coat of Epoxy paint of desired
colour.
62 3 A gantry shall be erected on 2/3 nos. foundation based on road width and as NS 1 Nos. 250000
per site requirement of size 3500mm x 2000mm x 2580mm with pedestal size
of 900mm x 900mm x 1830mm and footing of size 3500mm x 2000mm x
600mm of RCC of 1: 2: 4 and PCC of 1:4:8 in size 3550mm x 2050mm x
150mm with reinforced steel as per attached drawing, 12mm dia and 10mm
dia TOR steel with 12 foundation bolts of 1220mm length and 25mm dia for
one foundation complete with center shuttering. Complete as per approved
drawing and to the satisfaction of engineer in charge. (Detail as per enclosed
drawing) (Quantity shows total no. of foundations)
63 35 Facia Board NS 1 Sqmt. 14000

Providing, Supplying & fixing of Facia Sign Boards made of 4mm thick ACP
Sheet with face covered with RETRO REFLECTIVE MICRO PRISMATIC Type
IV Sheeting and messages with overlay sheeting, with edge support frame
structure of 72mm X 72mm X 2mm SS Pipe of S-304 grade and 19mm x
24mm x 1.5mm inner frame with diagonals and bracing. Messages and
graphics shall be plotter cut with overlay sheeting or HIGH INTENSITY
PRISMATIC GRADE Type IV fixed with Very High Bond tape of 24mm wide
and 2.3mm thick and rivets, fixed on to a existing structure with the help of
suitable expansion fastners. (Detail as per enclosed drawing) (EXTERNAL
SIGNAGES) Material should be in compliance with Code of practise for Road
signs, Indian Road congress 2010, IRC-67-2010)
64 15 SUBHEAD III- INTERNAL SIGANGESSupplying & fixing of Emergency NS 1 No. 680
Escape signages made of 1mm SS sheet with face fully covered with Photo-
luminescent sheet with message and letters Plotter / Electronically cut text of
vinyl lamination. ( EXTERNAL SIGNAGES) Material should be in compliance
( INTERNAL SIGNAGES) Material should be in compliance with Code of
practise for Road signs, Indian Road cingress 2010, IRC-67-2010)a) Fire
Extingusher Boards size (250 mm x 250 mm)
65 10 SUBHEAD III- INTERNAL SIGANGES Supplying & fixing of Emergency NS 1 No. 680
Escape signages made of 1mm SS sheet with face fully covered with Photo-
luminescent sheet with message and letters Plotter / Electronically cut text of
vinyl lamination. ( EXTERNAL SIGNAGES) Material should be in compliance
( INTERNAL SIGNAGES) Material should be in compliance with Code of
practise for Road signs, Indian Road cingress 2010, IRC-67-2010) b) Fire Exit
(250 mm x 250 mm)
66 6 Manufacturing, Supplying & fixing of ceiling hung sign board of size 900mm x NS 1 Each 22000
300mm (Single Sided) as shown in the drawing with all necessary texts and
symbols. Sign Board shall be made of 4mm Thick ACP Fully covered with High
Intensity Micro Prismatic Sheting (Type IV) with powder coated aluminium
frame work of specified sections. Supported with frame of 19mm x 24mm x 1.2
mm thick SS rectangle pipe and 25 mm dia. pipe stainless steel pipe (S-304
grade). (INTERNAL SIGNAGES) Material should be in compliance with Code of
practise for Road Airport signs, Indian Road congress 2010, IRC-67-2010)
Entry (2 Nos)
Exit (2 Nos)
Baggage Claim (1 No.)
Security Check (1 No.)
67 15 Manufacturing, supplying and fixing of S.S.Plate of followin size made of 2 mm NS 1 Kg 900

SS sheet with message and letters engraved in black colour with no borders.
Board can be ceiling hung from wall/RCC/False ceiling with fancy metallic
chain including all necessary fasteners, nuts, bolts and other accessories.
(Material should be in compliance with Code of practise for Road and Airport
signs, Indian Road congress 2010, IRC-67-2010) 500mm x 200 mm -
Security Check, 500mm x 200 mm - Restricted Entry , 500mm x 200 mm -
VIP Lounge ,500mm x 200 mm - Bank.
68 115 Manufacturing, Supplying & fixing of S.S.Plate of following sizes made of 2mm NS 1 Kg 700
SS sheet with message and letters engraved in black colour with no borders
including all nuts, bolts and other accessories.Board can b+C18e fastened
parallel or perpendicular to wall including all necessary fasteners. (Material
should be in compliance with Code of practise for Road and Airport signs,
Indian Road congress 2010, IRC-67-2010)
Ladies Toilet (3 Nos.) ( Size 150 mm x 150 mm) (Only figure Based) , Gents
Toilet (3 Nos.) ( Size 150 mm x 150 mm)
(Only figure Based), Handicapped Toilet (3 Nos.) ( Size 150 mm x 150 mm),
Ladies& Gents toilet (2 Nos.) ( Size 150 mm x 150 mm) (Only figure Based),
Washroom ( Size 300 mm x 100 mm) (Figure + Text based) , Drinking
water ( Size 300 mm x 100 mm) , Pantry( Size 300 mm x 100 mm) , Rest
Room ( Size 300 mm x 100 mm) , Server Room ( Size 300 mm x 100 mm) ,
Electrical Room ( Size 300 mm x 100 mm) , Conference Room ( Size 300 mm
x 100 mm) , Panel Room ( Size 300 mm x 100 mm) ,.Plates for office area (
Size 300 mm x 100 mm) , VIP ( Size 300 mm x 100 mm) Child Care ( Size
300 mm x 100 mm) , Medical room ( Size 300 mm x 100 mm) , Security
Check ( Size 300 mm x 150 mm) , Control Room ( Size 300 mm x 150 mm) ,
Save Water (Local Language+Picture) ( Size 300 mm x 150 mm), Save
Electricity (Local Language+Picture) ( Size 300 mm x 150 mm), Keep Clean
(Local Language+Picture) ( Size 300 mm x 150 mm), Use Dustbin (Local
Language+Picture) ( Size 300 mm x 150 mm), Yeh Parisar Aapka he. Kripya
isse Swach Rakhne (Local Language) (Size 400 mm x 150 mm) , NO Smoking
(Size 400 mm x 250 mm), Yeh Parisar Camera ki nigrani me he (Local
Language) ( Size 400 mm x 450 mm)
Total
69 14 E). SUB ESTIMATE FOR HVAC WORKS APSS 1 No. 46258
EQUIPMENT -Supply of split AC unit with high wall mounted indoor unit and
outdoor condencing unit Hermetically sealed compressor suitable for operation
on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying
air circulating and filtering with cooling and condensing units with 3.5 mts of
copper piping, insulation kit and 4 mts of 3 core copper flexible chord , built-
in stabilizer (Voltage range 160- 264 volts) and cordless remote control
complete as required.1.5 TR 5 Star capable of delivering 18000 BTU/hr and
above with operating on refrigerant R-32 / R-410A with COP not less than 3.6
w/w Makes: Daikin FTF50QRV16 or its equivalent model of Carrier / Blue
Star.
70 2 EQUIPMENT -Supply of split AC unit with high wall mounted indoor unit and APSS 1 No. 50016
outdoor condencing unit Hermetically sealed compressor suitable for operation
on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying
air circulating and filtering with cooling and condensing units with 3.5 mts of
copper piping, insulation kit and 4 mts of 3 core copper flexible chord , built-
in stabilizer (Voltage range 160- 264 volts) and cordless remote control
complete as required1.8 / 2.0 TR 3 Star capable of delivering 21600 BTU/hr
and above with operating on refrigerant R-32 / R-22 with COP not
less than 3.25 w/w.Makes: Daikin FTC60QRV16 or its equivalent make of
Carrier / Blue Star
71 16 Installation of Split Air Conditioners. APSS 1 No. 1500
72 16 Flushing the line, leak testing, leak stopping, vaccumming, dehydrating and APSS 1 No. 2100
charging the gas in the refrigeration system for 1.5/2.0 Ton Split A.C.Unit.
73 285 REFRIGERANT & DRAIN PIPING- Providing 2 runs of Copper tubes for APSS 1 RM 1000
suction and liquid between
indoor and outdoor unit for split/Casseete Air-Conditioner including
foaming etc., complete. 5/8" (15.9 mm) O.D. & 3/8" (9.5 mm) O.D.
74 200 Supply of PVC insulated 3 core 2.5 Sqmm sheathed flexible coppercable for APSS 100 RM 9227
voltage up to 1100V as per IS 694/1990.
Makes: Finolex / RR Kable.
75 50 Supply installation, testing and fixing of Class’B’ PVC pipes ISI as per IS 4985- NS 1 RM 625
2000, drain piping complete with insulation fittings, supports as per
specifications.50 mm dia
78 151.8 F). SUB ESTIMATE FOR INTERIOR WORKS NS 1 sqm 12750
SUBHEAD I - ROLLER BLIND, PARTITIONs & TINTED FILM--FULL HEIGHT
MODULAR PARTITIONS -Providing and Supplying Full Height Modular
Partition of 75mm thickness and should have clear space of 50-55 mm for
electrical wiring.The height of partition considered is 3300mm (Approx.). All
metallic parts shall undergo a 7 stage anti rust treatment and shall be powder
coated in suede finish to a thickness of minimum 45 microns.-Modular
Partitions shall be an assembly of the following parts:-:-Levellers-Each
frame shall be provided with two 8-10mm leveling bolts which allow 15mm
adjustment for floor unevenness. The levelers shall be concealed inside the
skirting and shall be completely retracted inside the skirting in case of
uniformly flat floors.--Wall Start- This is a joinery, which is used to fix
partition with wall as per requirement. The section is made of 75mm (W)
x50/75mm(D) aluminium extrusion/CRCA steel. This should have necessary
slots for fixing and can take wire from wall to partition.
Frame Gasket- Frame modules shall have PVC foam Gaskets of 2mm
thickness and 8mm width pasted with PVA glue along the inner periphery on
both sides to prevent sound and dust transmission through the tiles. The
frames shall also have 2mm x 10mm foam gaskets pasted with PVA glue on the
outer periphery so as to seal the gaps between the adjacent frames.
Frames shall form the basic support structure for all components and shall be
of 75mm x 35mm CRCA Steel section. The main vertical member of the frame
bearing the load of brackets and storages shall be made of 1mm thick CRCA
steel. The connecting vertical face shall be made up of 0.8mm thick CRCA
Steel. The horizontal members shall be made of 0.8mm CRCA steel. Each
individual module shall not be more than 700mm in height and shall not be
more than 1200mm in width.Frames can have 1-3 modules in prefabricated
form. Additional height shall be achieved by mounting modules over them. The
bottom module shall be mounted over a skirting of 85mm height. The skirting
shall be designed so that switches can be provided on the skirting level. The
frames shall also have prefabricated slots for fixing brackets used to support
worktops, gable ends, etc.The skirting shall be snap fitted on both sides with
Skirting Plates made of 0.6mm thick CRCA steel.
Ceiling Rail-The telescopic ceiling rails shall be made of aluminium extrusions

of 75mm Cross section with 1.2mm thickness. The height of the ceiling rail
shall be of 40-55mm. The ceiling rail should allow an height adjustment of 10-
15mm upwards. Posts-The frames shall be connected at the junctions by
aluminum connectors. The Junction of frames shall be snap fitted with square
Posts. The Posts shall be made of aluminium extrusions of 1.2mm thickness
of section 75mm x 75mm for 2-Way & 75mm x 1.2mm for 3-Way.Tile Finish-
Tile Finish-
Tile Finish-Front Partition shall have Glass finish in all Modules.LAMINATED TILES: The Laminated tiles shall be made of 9mm MDF Board with 0.8
79 115.5 Tile Finish- Dividing Partition shall have Laminated Finish in all Modules. NS 1 sqm 13750
LAMINATED TILES: The Laminated tiles shall be made of 9mm MDF Board
with 0.8mm Post Lamination.FABRIC TILES (Optional): The fabric tiles shall be
made of 9mm MDF Board with fabric pasted on them by PVA glue. It should
be possible to replace the fabric by peeling it off.Glass Tiles- Glass Tiles shall
be 4 mm clear toughened glass are supplied and fixed from both side with all
necessary interior trims and gaskets.There are two glass tiles that can be fitted
and are completely interchangeable with regular tiles.
80 115 ROLLER BLINDS Providing & fixing roller blinds, with head rail and fabric NS 1 sqm 3200
connector with min gap of 6/8 mm ig required. Faabric 100% glass fibre with
PVC coating on both side light transmission 0% with flame retardant.the
control unit consists of clutch mechanism.The unit is made of high strength
reinforced plastic.The clutch is of Wrap design. High carbon steel springs are
provided to transmit motion from the driven mechanism.Clutch is operated
directionally by use of endless beached chain to raise and lower the blinds
smoothly to decide height.clutch never needs adujustment.Hand rail- to be
rpovided of an aluminium-extruded rail on which the control unit and idler are
mounted with help of bracket.
Idler is high strength reinforced plastic consisting of an outside sleeve and

center shaft. sleeve provide bearing surface for center shaft and rotate freely for
longer wearing operation. Bracket are powder coated in white.operationg chain
is made of 4.5 mm plastic beads molded on 2.2 mm thick polyster cord. the
pitch of the beads is 6mm.fixing bracket are L-Bracket(2mm) and Clamp(0.5
mm in zinc plated). Roller tube is made up of high strength aluminium alloy
extruded grooved tube which is powder coated or anodized.The fabric of the
blind is attached to the tube.incase light duty fabric attached to the with
plastic insert and incase of heavy duty the fabric attached using both side
tape..Load bar is fixed to the bottom of the fabric and the purpose of it is to
keep the fabric in tension and straight is made up of extruded aluminium alloy
with a groove for fixing the fabric using plastic. the ends are pluged using ABS
ends caps.Complete in all respect.
81 35 FROSTED FILM Location: On Glass partition & DoorsSupplying and placing of NS 1 sqm 2,080
approved make frosted film over the glazing as per the design having Thickness
of 2Mil, Visible Light Transmittance=77%, Visible Light Reflectance=9%, Solar
Energy Transmittance=61%, Solar Energy Reflectance=8%, Solar Energy
Absorbance=31%, Ultra Violet Transmittance < 2%, Glare Reduction=15%,
Shading Coefficient=0.81, Emissivity=0.85, U Factor (BTU/Hr/Sq. ft.)=1.09
and Total Solar Energy Rejection=30%. complete as per specification and
approval of Engineer-in-Charge.
82 10 SUBHEAD II PORTABLE CABINS, WASTE BINS & MISCELLANEOUS ITEMS-- NS 1 each 12500
WASTE BINS (OUTDOOR)Provision, Supply & Installation/fixing of wheeled
waste bins moulded from special UV stabilized grades of polyethylene - each of
330 litres capacity of size TOP 570x740 BOTTOM :410x575 H: 1070 COLOUR:
Military Green & Dark blue .The bins should be rust free, elegant, light weight,
easy to handle and cleaning, hygienic, leak proof & durable etc. complete as
per specification and approval of Engineer-in-Charge.
83 2 PORTABLE SECURITY CABINWall & Roof: - Panels manufactured using NS 1 each 197500
mscorrugated sheets 1.6mm (18gauge) with inner layer of MDF board 6mm
thick & Glass wool 50mm thick in between for insulation. The cabin will be
duly painted. These are a water proof, termite, heat and fire resistant and
comfortable in extreme hot or cold climate. with lift & shift arrangement from
the top.False ceiling with pre laminated boards Panelling for room-like finish,
wall to wall laminated board Floor: - MS, angle ISMC (Channels) are tubes of
suitable sizes and strength are used to cased the floor grid of size 600x600 the
floor is 150mm-185mm (4”-6”) above GL and is covered with 16mm cement
fibre board finally for floor & vinyl of 1.5mm thick is provided for neat finish.
Windows:-Plain aluminium sliding glass windows

with aluminium grill & mosquitoes jalli with locking
arrangements with rain shed.Quantity - 4nos.Door: -MS corrugated door for
main entrance with
locking arrangements with rain shed.Quantity - 1nos.Paint work: - Outside
enamel paint of desired colour.Electrical:-Cost of electrical points including
pvc battens with internal wiring are inludedFollowing fixtures are all inclusive:
5 Amp points-4nos.5 Amp point-1no.Ac points-1no.Tube light-2nos.Ceiling
fans-2nos.MCB with board.External is out of scope.Cabin Size:3.0mx3.0mx3.
0m clear height from FFL
84 2 PORTABLE TOILET Walls : out side 1.6mm ms sheet walls panels of 50mm NS 1 each 125000
thick made out of both sides 8mm thick prelaminted board in between glass
wool of 50mm thick .Roof : Sandwithced panels 75mm thick (insulated
panels made out of 0.63mm GI Sheets on both sides with insulation of glass
wool 50mm thick).Inside Cladding : PVC mounted upto 5ft on walls four sides
walls.Ventilator : 1 (One) ventilation.Electrical points : - 5Amp points -3nos.
Exhaust Fan – 1 NoToilet Fixtures : 1. European / Anglo Indian type ceramic
WC Water cistern.Wash BasinMirrorTowel railSoap holderCRP TapsFalse
ceiling with pre laminated boardsProvision for water tank Provision for inlet
& outletDoor- 6'X3'Size of cabin 6Ft.x 4Ft (OD)
85 5 DOOR MAT Supplying and placing of approved make, heavy duty door mat NS 1 each 10250
(plastic fiber/grass roll type) near entrance as per manufacturer's
specifications. All wastage shall be to contractor's account and only the size as
per actual shall be measured and paid for. with approval of Engineer-in-
Charge--Dim: 1200mm x 900mm
86 15 SS WASTE BINSupply & Installation/fixing of staimless steel of grade SS304 NS 1 each 7638.76
recycle bin,size 760mm height , 18 gauge in glossy/matt. There will be one
opening of 250mm dia with/without flip lid.
87 4 SUBHEAD III - GATE COUNTER, CHECK IN COUNTER & X-RAY ROLLER NS 1 Each 208000
BENCH--CHECK IN COUNTER-950mm WIDE--Full length Stainless steel bag
rest and trolley guard. Stainless steel kick plate,Glass front panel (can be
embedded with various colours and logos), Stainless steel rails on conveyorside
panel, Melteca laminate side panels, interior and work surface. High strength
impact resistant acrylic counter top, allows clear view of passenger. CPU
hinged cupboard, Conveyor control console, three full extension slides for
printers,printer paper and baggage weighing system. Refer to drawing for more
details.Size:950W X 1050D X 955H (Table Top) & 1225H (Counter Top)
88 2 GATE COUNETR-950mm WIDE--Stainless steel kick plate, NS 1 Each 188500

Glass front panel (can be embedded with various colours and logos), Melteca
laminate side panels, interior and work surface. High strength impact resistant
acrylic counter top, allows clear view of passenger. CPU hinged cupboard, three
full extension slides for printers and printer paper. Refer to drawing for more
details.Size:950W X 825D X 955H (Table Top) & 1225H (Counter Top)
89 2 X-RAY ROLLER BENCH--Stainless Steel X-Ray rollerbench with 20 diameter NS 1 Each 320125
stainless Steel rollers on bearings mounted on square stainless Steel tubular
all welded end frame with adjustable feet. **Units will be transported fully
assembled at Ex UFL, ready for unpacking and placement at site.Size: 1300W
X 800D X 900H
90 3 SUBHEAD IV - TOILET ACCESSORIES DISABLED ARM SUPPORT & GRAB NS 1 Each 17086.70
BAR FOR WC--Fabrication, supply & installation of Stainless steel floor or wall
mounted hand railing of 50mm dia, 1.6mm thick S/S pipe with necessary bend
& termination at all height confiming to SS 304 grade, Sating finish, with)
fixing at C/C 900mm using neck S/S pipe 19 X 2mm as per direction of
Engineer in charge.
91 3 DISABLED ARM SUPPORT (FIXED) FOR WASH BASIN---Fabrication, supply NS 1 Each 15076.5
& installation of Stainless steel Arm Support System made of round SS 304
grade of dia 38.1 x 1.5 mm thk with 100 x 5 mm thk Flange. Over all size:-
450 x 215mm (fixed on both sides of WB) as per direction of Engineer in
charge.----Fabrication, supply & installation of Stainless steel Arm Support
System made of round SS 304 grade of dia 38.1 x 1.5 mm thk with 100 x 5
mm thk Flange. Over all size:- 450 x 215mm (fixed on both sides of WB) as per
direction of Engineer in charge.
92 13 HAND DRIER-Supplying and placing of automatic electrically operated Hand Dryer in

NSposition 1usingEach
required fixing
13000materials etc complete in all resp
1. ON/OFF MODE: The drier goes on when hands approach, automatically,

and switches off by itself after drying the hands. Fully hygienic, NO-TOUCH
type 2. TIMER: With solid-state time-delay feature to avoid chattering. 3.
TIME RATING: Time required to dry a pair of hands upto wrists: Half a minute.
4. DUTY RATING: Rated for continuous repeat use (CRU rated). 5.
TEMPERATURE: Temperature of drying air-stream is such that user does not
feel uncomfortable and the hands do not feel excessive heat. With SUMMER-
WINTER control. 6. SOUND LEVEL: Quiet operation below 70
dB. 7. ENCLOSURE: Sheet metal enclosure multiple
grounded electrically and mechanically to avoid danger of shock. Multiple
stoved multiple coats spray painted white finish. (Or as mentioned under para
8) 8. COLOUR: Exterior can have a shade which matches the wall or tile
color. 9. MOUNT: Indoor
wall mounting. With one integral bracket for firm mounting the drier on wall.
10. PROTRUSION: Drier protrudes only 110mm from the wall. Sleek design.
11. ARROW GUIDE: A guiding arrow to indicate the drying position of hands.
12. ELECTRICITY: For 240 volts,1-phase, 50 Hz , 15 amps AC supply.
13. CABLE: Sheathed three core flexi cable 1-metre length,1-three pin 15 amps
standard plug top.
14. PERFORMANCE: Suitable for Heavy Duty performance.
15. USER LIST: Submit a list of the users who have used it for not less than 2
years.
16. AFTER-SALES ATTENTION: (i) Proven record of prompt after-sales
attention and
(ii) Organized and established own team for the quick attention.
17. LOCK & KEY arrangement to avoid unauthorized movement of the drier
18. MUSIC: A musical chime plays while drying hands, with volume and
on/off control .
93 8 SUBHEAD V - MODULAR STORAGE ITEMS--FULL HEIGHT STORAGE-- NS 1 Each 24611.84

Supplying, Installation and placing of stackable/single unit 1980(H) x 900(W) x
425(D) mm storage , made of 0.8mm thick Prime Quality CRCA Steel, having
Sliding/hinged Door with or with out top hanging arrangement to prevent
derailment. Each door provided with 2 plastic roller having steel ball bearing
for smooth movement of door & less noise. it has to be Snap on type
aesthetically appealing die cast 5 Lever Cam Lock for safe Locking & Plastic
flush & recessed handle. it has to be Screw type lever with hex plastic base
(add in unit height min. 8 mm & additional 5mm max for adjustment),
complete as per specification and approval of Engineer-in-Charge.
94 8 OVERHEAD STORAGES--Supplying and placing of overhead storage of size NS 1 Each 9595.03

900mm (W) X 450mm (H) X350mm (D) in required lengths, Top/Bottom Panel
made of 0.8mm thk MS CRCA Sheet/18mm th. PLB, Side Panel made of 1.2
mm thk MS CRCA Sheet /18mm th. PLB and Door Panel made of 0.6mm thk
MS CRCA Sheet/18mm th.PLB. All powder Coated/PLB storages, having
Removable key type 10 lever cam door lock with lock lever to lock and open the
door, etc complete as per specification and approval of Engineer-in-Charge.
95 10 SIDE STORAGE & CABINET UNITS-Providing & supplying approved make, NS 1 Each 18342.5
hinged door Free standing Back Side Storage & cabinet units of sizes as
specified below resting on floor having door, top, sides, back, & shelves in
CRCA powder coated steel. The body and Shelves of the cabinets shall be made
of 0.8mm CRCA steel. The top of the cabinets shall be made of 2mm thick
CRCA steel and the skirting plate shall be made of 1.2mm CRCA steel. The
shelves shall be supported on Spring Steel clips and shall be adjustable at
intervals of 12.5mm heights. The cabinet shall be provided with CAM Locks.
The handles shall be PVC Moulded and shall be flush fitted. The cabinets shall
be provided with 4 Nos. M10 levelers for height adjustment upto 25mm.The
shutter shall have self-closing hinges. complete as per Specification and
approval of Engineer-in-Charge. Size 900mm(w) x 1200mm(h) x450mm(d) in
CRCA steel top.
96 1 SUBHEAD VI -CONFERENCE TABLE, OFFICE TABLES & COFFEE NS 1 Each 136389
TABLESCONFERENCE TABLESupplying and placing of Approved Make,
Conference Table-12 seater , U shaped of configuration as per attached
drawing and in Two Seater 1350mm (W) X 600mm (D) -09 Nos., Quarter Round
(One Seater) -2 Nos., with Wire management facility, MDF top with Membrane
foil coated with layer of polyurethane, Waterfall edge complete as per
specification and approval of Engineer-in-Charge.
Table Top:- Work Surface:Top thickness should be 35 mm Membrane finish,

Edge profile Waterfall Edge 10mm radius on top eadge and 5mm at bottom.
Under Structure:- Legs: Made from 25-36mm PPB (18+18) having a straight
profile with half round edges and clad with 0.6mm thick Post Forming
laminate. Overall thickness of leg is 37.2mm Modesty Panel: Made from
PLT (Prelaminated Twin) boards of 18mm thick.Wire Manager:-.Wire Carrier:
Made from 0.6mm thick CRCA painted.Carrier Cover: Made from 12mm
thick MDF painted overallMaterial:-.Substrate: MDF.Skin: PVC Membrane
foil (0.4mm thk) clad on the substrate MDF using PU glue for better adhesion.
This foil is pre-coated with layer of polyurethane for better scratch resistance.
97 7 TABLE FOR OFFICERSSupplying and placing in position Executive Table, NS 1 Each 67043
Side Unit & Credenza whose top and side panel made up of 25 mm thick plain
particle board (PPB) clad with 0.6 mm thick post formed laminate and 1 mm
thick Backing Laminate (BDL) Flat edge duly sealed with 2mm thick PVC
Beading. The Modesty is 18 mm thick plain particle board (PPB) with 1 mm
thick decorative laminate (DL) on both sides. Edge sealed with 2 mm thick PVC
Beading. The Hinge door back unit top made up of 25 mm thick plain particle
board (PPB) clad with 0.6 mm thick post formed laminate and 1 mm thick
Backing Laminate (BDL) Flat edge duly sealed with 2mm thick PVC Beading.
The door partitions and shelves are made up of 18mm thick plain particle
board (PPB) with 1mm thick decorative laminate (DL) on both sides. Eadge
sealed with 2 mm thick PVC beading. It has Black Colour Metal Pedestal
without Castors, as per approval of the Engineer-in-charge.Executive Desk,
size 1500X900X740mmSide Unit (LHS/RHS), size 1050X520X700-705
mmCredenza (Back Unit), size 1280X520x 700-705mm
98 8 STAFF TABLESupplying and placing in position table of the following NS 1 Each 13964.34
specifications.
The overall size of the table shall be 1200mm (L) x 750mm(W) x 730mm(H). The
work top shall be made of 18mm thick Prelaminated Particle Board. All work
surface edges shall be duly sealed with 2mm thick PVC edgebanding. The
understructure shall be 18mm thick PLB. The rectangular component shall be
1.2mm thick CRCA with powder coating finish. The legs in the table shall be
made of 38mm x 25mm x 1.2mm thick Mild Steel ERW tube with powder
coating finish. The pedestal shall be made of 0.6mm thick CRCA with drawers
with 10lever cam lock. Table shall be provided with vertical & horizontal wire
carriers and CPU holder fixed to the frame. Slots shall be provided in the top
frame of table for passage of wires ensuring clutter free desk.
The handle in the drawers shall be made of injection moulded polypropylene.

The above entire unit shall be manufactured as per specifications. The work
shall be carried out as per the instructions received from engineer in charge.
Size:1200mm (L) x 750mm(W) x 730mm(H)
99 20 CENTRE/COFFEE TABLEProviding & placing in position center table with NS 1 Each 12973.84
sizes 1000 W X 500 D X 428 H mm with top made in 10mm tempered glass
with rubberwood frame wok supported with an understructure of MDF &
finished with paper laminate.Refer Dwg - 13 of detailed specification. The work
shall be carried out as per the instructions received from engineer in charge.
Side Table: 450mm W X 450mm D X 450mm H.
100 3 STUDY TABLE WITH CHAIR FOR GUEST ROOMCHAIR : High Back Dining NS 1 Each 31250
Chair in solid rubber wood with polished finish.
Material : Rubber Wood
Finish : Clear lacquer finish
Seat with foam cushion of density 28+ and fabric.
Dimension : Width 450 mm X Depth 490 mm X Height 935 mm
TABLE: Study Table in finger jointed 20mm thick rubber wood with polished
finish. Legs in 60X60mm solid wood.
Table top size: 900 (W)X 600 (D)X750 (H) mm – 20mm thick.
Finish : Clear Melamine coat
101 4 SUBHEAD VII - SEATING/RESTING: SOFA SYSTEMS Providing & NS 1 Each 19096.9
Supplying of cushioned sofa sets in approved fabric with arm rests & legs in
MS ERW piping powder coated/ teakwood and in 3,2 & 1 seat configrations to
the satsfaction of Engineer -in -charge. Sofa Set shall be of minimum 100mm
thick PU Foam of min. 32kg/m3 density for back foam and 45 kg/m3
density for seat foam shall be of minimum 100mm thick PU Foam of min.
density
Arms & legs shall be of MS ERW piping powder coated class I teakwood frame
of thickness 70mm x 32mm with melamine matt finishOne Seater- 700 (W)
x 700 (D) x (H) 810 mm
102 9 SUBHEAD VII - SEATING/RESTING: SOFA SYSTEMSProviding & Supplying NS 1 Each 33168.3
of cushioned sofa sets in approved fabric with arm rests & legs in MS ERW
piping powder coated/ teakwood and in 3,2 & 1 seat configrations to the
satsfaction of Engineer -in -charge. Sofa Set shall be of minimum 100mm
thick PU Foam of min. 32kg/m3 density for back foam and 45 kg/m3
density for seat foam shall be of minimum 100mm thick PU Foam of min.
density
of thickness 70mm x 32mm with melamine matt finishTwo Seater 1200 (W)
x 700 (D) x (H) 810 mm
103 2 Providing & Supplying of cushioned sofa sets in approved fabric with arm 1 Each 45230
rests & legs in MS ERW piping powder coated/ teakwood and in 3,2 & 1 seat
configrations to the satsfaction of Engineer -in -charge. Sofa Set shall be of
minimum 100mm thick PU Foam of min. 32kg/m3 density for back foam
and 45 kg/m3 density for seat foam shall be of minimum 100mm thick PU
Foam of min. density
of thickness 70mm x 32mm with melamine matt finish three Seater- 1700
(W) x 700 (D) x (H) 810 mm
104 9 TOP EXECUTIVE & HEAD CONFERENCE CHAIR Providing and placing in NS 1 Each 27749.04
position high back chair of the following specifications. The seat shall be made
of insert moulded polyurethane foam upholstered with foam laminated mesh
fabric. The seat is made of plywood and upholstered with moulded
polyurethane foam and foam laminated mesh fabric. Seat assembly size should
be 510mm (W) x 525mm (D). The armrests should be adjustable in nature.
chair should be provided with 360 degree revolving, single point control, tilt
tension sdjustment, 4 position locking. The spine bracket is made of
aluminium diecast piece connecting back with mechanism. The twinwheel
castors are having injection moulded in black nylon. The chair shall be
provided with one headrest for confortable long hour seating. The work shall be
caried out as per instructions received from engineer in charge.
105 24 TOP EXEC. VISITOR & CONFERENCE CHAIRS Providing and placing in NS 1 Each 18740.98
position visitor chair of the following specifications. The seat shall be made of
insert moulded polyurethane foam upholstered with foam laminated mesh
fabric. The seat is made of plywood and upholstered with moulded
polyurethane foam and foam laminated mesh fabric. Seat assembly size should
be 510mm (W) x 525mm (D). The armrests should be adjustable in nature.
Chair is provided with leg frame assembly made of Mild Steel attached to base
of the seat. The work shall be caried out as per instructions received from
engineer in charge.
106 12 STAFF CHAIR The seat shall be made up of 1.2 ± 0.1 cm thick hot pressed NS 1 Each 10400.00
plywood and polyurethane foam upholstered with Polyester fabric and shall be
covered at bottom with non-woven black fabric.cm.The back shall be injection
moulded plastic and shall be upholstered with high tenacity mesh fabric. The
Seat Size shall be: 48.0 cm (W) x 48.0cm (D) and Back Size shall be: 44.5 cm
(W) x 43.0 cm (H). The armrest shall be one-piece loop type made up of black
plastic injection moulded in nylon. The centre tilt mechanism shall be
designed with the 360° revolving type with Seat Height Adjustment knob,
Upright position locking, Tilt tension adjustment. The pneumatic gas-lift shall
be Class 3 category and shall has an adjustment of 12.0 ± 0.5 cm stroke. The
pedestal shall be made of moulded plastic GF Nylon and fitted with 5 nos. twin
wheel castor. The pedestal shall be of dia 56.0 ± 0.5 cm pitch-center diameter
(dia 66.0± 1.0 cm with castors). The twin wheel castors having 0 5.0 ± 0.1 cm
shall be injection moulded in Black GF Nylon. Overall Dimensions of Chair
shall be Seat Height - min 40.0 to max 52.0cm, Height - min89.0 to max 101.0
cm, Width & Depth of Chair as measured from pedestal - Width-66.0 cm and
Depth-66.0
107 40 PUBLIC LOUNGE CHAIR Supplying and placing of approved make 3 seater NS 1 Each 27764.22
public lounge chairs with 2 end armrest complete as per specifications and
approval of the Engineer-in-charge. Cross Beam: it should made of black
powder coated rectangular M.S. ERW tube having 80X40X2 mm size.Leg and
Armrest: These are chrome plated made of cold rolled steel / SS 202 with 1.2
mm thickness. Armrest & leg is assembled to the Cross Beam with 2 Nos.
M10X100 mm boltsSeat Back Shell: The 1.6 mm thk powder-coated perforated
shell is made from cold rolled M.S. sheet / SS 202. The side bar is made of
Chrome plated solid steel 30 X 12 mm (DIN174) with fluting and plastic
inserts. The shell is assembled on the Cross Beam with help of M8 Bolts (Per
Seat-8nos. Seat to Bracket and 4 nos. Bracket to Cross Beam).Over all Size:
1800mm W X 680mm D X 780mm H. Height: 780mm (+20mm, Adjustability at
foot)Individual Seat Width: 540mmSeat Height: 410mm (Perfo Seat) (+20mm,
Adjustability at foot)Seat Back Inclusive Angle: 105ᵒ. (degree)Component
Tolerances: +/-5mm and +/-1ᵒ (degree)
108 4 BED FOR REST ROOM Supplying and placing of bed of the following NS 1 each 27484.66
speciications. Bed with understorage shall be of size 900mm (W) x 2060mm (L)
x 450mm (H) x . Bed structure should consist of metal frames made of M.S.
Channels in 1.0 mm Thickness. Bed shall be made of 18 mm thick
Prelaminated Particle Board with all the exposed edges are edge banded with
0.8 mm thck PVC edge beading. 18mm thck Prelaminated Particle Board in
Walnut Shade. Metals frames should be powder coating in shade Mat Black to
the Thickness of 50 microns (+ - 10). Head Board (optional) of size
2700mmX750mm shall be
made of 25mm thick pre laminated particle board
and shall be fixed to the wall.
he bed shall be provided with one coir matteress of 4 inch thickness. Brands
for Mattress: Dunlop, Godrej, Sleepwell The work shall be carried out as per
the instructions received from engineer in charge.
109 2 SUBHEAD VIII - WHEEL CHAIR, BAGGAGE TROLLEY, TAPE BARRIER NS 1 Each 16266.75
WHEEL CHAIRSupply and placing of collapsible wheel chair with following
specifications : 60cm self-propelling spoke puncture proof tyred rear wheels,
20cm front solid tyre swivel castors, . Nylon cord upholstery - flame retardant,
. Detachable desk arms and fold down back, Padded armrests, Swing away
detachable footrests, height adjustable with heel loops, Elevating leg rest
optional (AC100), Progressive and parking braking system and Crash tested
110 35 PASSENGER BAGGAGE TROLLEY Trolleys will be of 4 wheel type. Front 2 NS 1 Each 7500
wheels will be caster swivel type and 2 rear wheels. The Vertical and
Horizontal frame will be of AISI grade 304 SS pipes having circular section or
elliptical section with thickness 2 mm + 0.12 mm. In case of circular sections
the vertical frame dia should not be less than 30 mm and platform horizontal
mainframe pipes dia not less than 25 mm. In case of elliptical section the size
should not be less than 38 mm X 20 mm. Hand Baggage Basket will be of AISI
grade 304 SS Rods / Pipes. The basket should be of the following size :Length:
525 mm + 5 mm Width: 225 mm + 2 mm Height: 132 mm + 1.5 mm
Also the projection of the basket beyond the vertical frame should not be more
than 60 mm, so that the load platform area is not affected. The advertisement
panel can be at front side and at the rear side. The design shall incorporate
finger protection clearance.Hand Baggage Basket will consist of frame of SS
rods 6mm + 0.25 mm. The basket will be welded to the mainframe by SS
welding rods.
All wheels will be of moulded synthetic non-marking rubber tyred with

precision double ball bearings, dust protected, sealed and self lubricated.
Swivel caster will also have dust protected large ball bearings instead of deep
grooved ball bearing. Such wheels should be any of the makes as mentioned
below ;FLEXELLO ,CONTINENTAL , BASSICK, WANZL , EXPRESSO or
CADDIE The axles will be made from EN 8 hardened MS Rods.
10 trolleys should stack with each other in about 3.5 to 4.00 mtrs. length and
the design should be such that while stacking and moving in a group of 15
trolleys, the maneuvering should be smooth.
Length - 1025 mm + 10 mm
Maximum carrying weight :300 Kg.
Normal carrying weight 90 Kgs
Overall weight : Minimum 22 Kgs.
Load Area Slope (towards rear)9° + 1°
Load Platform Length (Effective) : > 700 mm
Width (front) -360 mm + 3 mm
Width (rear) - 650 mm + 6mm
Height - 1000 mm + 10 mm
Front Caster Wheel should be moulded synthetic non marking rubber wheel
with precision double ball bearing dust protected and hub thickness sufficient
to carry a weight of 75 Kg on each wheel. Swivel Caster will have dust
protected large ball bearings instead of deep grooved ball bearing. The nuts
provided shall have suitable locking arrangement to prevent loosening during
normal usage.
Rear Fixed Wheel should be moulded synthetic non marking rubber wheel with
double ball bearings dust protected and hub thickness sufficient to carry a
weight of 75 Kg on each wheel. The nuts provided shall have suitable locking
arrangement to prevent loosening during normal usage.Front bumper guard:
PVC / Exlan plastic minimum 5mm thick Finish: Trolley will have Electro
Polish Shining Finish .Advertisement panel No.1 Advertisement panel of
Aluminum plate
(11 Gauge/3 mm thick) without imprint to be
fixed on Vertical main frame Advertisement panel No.2 Advertisement panel
of Aluminum plate
(11 Gauge/3 mm thick) without imprint to be
fixed on the horizontal member of the basket.
Identification Plate:Plate of size 100 mm X 80 mm X 1.5 mm thick Aluminium

Plate will be riveted on the left side of the basket at the rear side on to the SS
Plate
fixed on the horizontal member of the basket .Number Plate Aluminium
Plate will be riveted on the right side of the basket at the rear side on to the SS
Plate fixed on the horizontal member of the basket.
111 15 QUEUE MANAGEMENT SYSTEM Provision, Supply & Installation/fixing of NS 1 Each 9500
stainless steel(SS 304 grade or higher) Q-Management system having
retractable tape head mechanism comprising of, SS double belt posts of 2 ½”
dia, 14” base & 950 mm tall, belt length 2.25m in color as approved and with
name printing as specified, complete with wall mounting clips at start points or
wherever required.Provision, Supply & Installation/fixing of stainless steel(SS
304 grade or higher) Q-Management system having retractable tape head
mechanism comprising of, SS double belt posts of 2 ½” dia, 14” base & 950
mm tall, belt length 2.25m in color as approved and with name printing as
specified, complete with wall mounting clips at start points or wherever
required.
112 6 SUBHEAD IX - WATER COOLER & WATER PURIFIER--WATER COOLER-- NS 1 Each 87020.5
Supplying and placing of approved make CFC(Chloro Floro carbon) free floor
mounted stainless steel self contained drinking water cooler with 120 ltr
storing capacity and 80 ltr cooling capacity Complete with installation &
commissioning at site. As per specification and approval of Engineer-in-
Charge.
Water Storage Capacity : 120-130 litres.
Water Cooling Capacity : 80- 85 liters.
No. of outlets / faucets : 2 nos. heavy duty type
Weight : 78 - 83 kgs
Refrigerant : CFC free R-134 or Equivalent
Body : made out of Stainless Steel 0.7 mm thick plastic coated stainless steel
sheet) Base Feet : Sturdy look with shock proof PVC feet
Tank insulation : High density puff insulation of 40 mm.
Fan motor : single phase
Compressor Rating : 5100 Btu/Hr
Compressor ( ambient range) : 25 Deg C to 54 Deg.C
Condenser size : Fin & tube type – inner groove 7mm 2 rows
Fan motor rating : 9 watts
Compressor make : Emerson / Tecumseh / Danfoss
With suitable three step TDR stabilizer as required
Compressor make : Emerson/Tecumseh /Danfoss
113 6 WATER PURIFIER--Supplying and placing of approved make Water Purifier for NS 1 Each 30000
attachment with CFC(Chloro Floro carbon) Water Cooler with 120 ltr storing
capacity and 80 ltr cooling capacity.Complete with installation &
commissioning at site. As per specification and approval of Engineer-in-
Charge.
114 10 SUBHEAD X-Supply& fixing of flooring for Server Room ANTI STATIC NS 1 sqm 3983.85
FLOORING Providing and fixing removable raised/false access flooring with
system and its components of approved make for different plenum height with
possible height adjustment upto 50 mm, comprising of modular load bearing
floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal
etc. all complete, as per the architectural drawings, as specified and as
directed by Engineer-in-charge consisting of :Providing at required spacing to
form modular framework, pedestals
made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter,
fully welded on to the G.I. Base plate of size 100mmx100mmx3mm at the
bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm
welded with GI fully threaded stud 16mm outer diameter with two GI Check
nuts screwed on the stud for level adjustment upto 50mm, locking and
stabilizing the pedestal head in position at the required level. The pedestals
shall be fixed to the subfloor (base) through base plate using epoxy based
adhesive of approved make or the machine screw with rawl plug.
Stringers system in all steel construction hot dipped galvanized of

rectangular size 570x20x30x0.80mm thick having holes at both ends
for securing the stringers on to the pedestal head using fully threaded
screws ensuring maximum lateral stability in all directions, the grid
formed by the pedestal and stringer assembly shall receive the floor
panel, this system shall provide adequate solid, rigid support for access floor
panel, the system shall provide a minimum clear uninterrupted clearance
between the bottom of the floor for electrical conduits and wiring etc. all
complete as per the architectural drawings, as specified and as directed by the
Engineer-in-charge.
Providing and fixing Access Floor panel of 600x600x32 mm medium

grade Filled Steel anti static high pressure Lamination of 800H grade
(FS800H). Access Floor panel shall be steel welded construction with
an enclosed bottom pan with uniform pattern of 64 hemispherical cones.The
top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7mm fused
spot welded together (minimum 64 welds in each dome and20 welds along
each flange). The panel should be Corroresist epoxycoated for lifetime rust
protection and cavity formed by the top and bottom plate is filled with Pyrogrip
noncombustible Portland cementitious core mixed with lightweight foaming
compound.
The access floor shall be factory finished with Anti-static High Pressure
laminate with Non Warp technology upto 1mm thickness for superior adhesion
and Surface flatness within 0.75mm.The panel is to withstand a Concentrated
Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre
of the panel which is placed on four steel blocks. The panel will withstand and
Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load
of 50kg all complete as per the approved manufacturers specification and as
per the direction of Engineer-in-charge. All specification must be printed on the
side of the panel to ensure the quality of the product--.450 mm Finished Floor
Height (FFH). sqm
115 3 SUBHEAD XI-Supply& fixing of HHMD/DFMD, FIDS & BAGGAGE NS 1 Each 503671
SCANNER---DFMD Supply, installation, testing & commissioning of Door
Frame Metal Detector in compliance with Technical specification (should be
NABL certified or other equivalent accredited labs from the country of origin of
the equipment) including cabling and conduiting complete in all respect as per
the direction of Engineer-in-charge. (CEIA, RAPISCAN U.K., Godrej or approved
equivqlent)
116 5 HHMD--Supply of Hand Held Metal Detector, in compliance with Technical NS 1 Each 5816
specification (should be NABL certified or other equivalent accredited labs
from the country of origin of the equipment) complete in all respect as per the
direction of Engineer-in-charge (CEIA, RAPISCAN U.K. Godrej or approved
equivalent)
117 7 FIDS Supply, Installation,Testing and Commissioning of Flight NS 1 Each 45000
Information Display System (FIDS) i/c followings as 1 set complete in all
respect or as approved by engineer-in-charge.Supply of 32" LED Display
Monitor (With in-built Intelligent Controller) for Arrival & Departure with floor
/ ceiling / wall mount
118 3 Supply of Data Entry Terminal with accessories. NS 1 Each 128965
119 1 Supply of FIDS Servers to work as Main & Standby (Set of 2 Servers) with NS 1 Each 285000
accessories
120 1 Supply of NTP Server with accessories NS 1 Each 150000
121 2 Supply of 2x8KVA Parallel redundant UPS with 30 minutes back-up on full NS 1 Each 500000
load and accessories
122 1 Supply of L3 Switch with fully populated 8 Nos. Fibre port and 16 Nos. Copper NS 1 Each 600000
port 100Mbps/1Gbps/10Gbps with LIU, Jack Panel & other accessories
123 2 Supply of L2 Switch with fully populated 4 Nos. Fibre port and 24 Nos. Copper NS 1 Each 164406
port 100/1000 Mbps/1Gbps with 19" wall mount Network Rack of suitable
size, LIU, Jack Panel & other accessories
124 1 Supply of 19"/ 42 RU Server Rack, integrated 17” TFT with KVM Switch, NS 1 Each 188105
Keyboard, Mouse, power distribution strip with accessories
125 2400 Supply & Laying of 25 mm dia, ISI marked PVC conduit with accessories and NS 1 Mtr 241.67
including wall cutting and plastering as required
126 900 Supply & Laying of UTP Cat 6 cable in conduit/ tray with accessories NS 1 Mtr 77.78
including termination with wall/ surface mount box as required
127 1200 Supply & Laying of 3 Core 2.5 sq mm multi-strand copper conductor PVC NS 1 Mtr 112.5
insulated PVC sheathed unarmoured power cable in existing conduit/ tray
with accessories as required
128 700 Supply & Laying of 6 core MMF OFC unarmoured cable on wall/ surface/ tray NS 1 Mtr 123.12
with accessories as required
129 1 Supply of Licensed Operating System (Server Level) with support for all Servers NS 1 Lot 400000
130 1 Supply of Operating System with support for all clients NS 1 Lot 352000
131 1 Supply of Licensed Antivirus with support for all Servers NS 1 Lot 30000
132 1 Supply of Licensed Antivirus (Client Level) with support for all clients NS 1 Lot 30000
133 1 Supply of FIDS package Software as per requirement of the tender NS 1 Lot 500000
134 1 Charges for the installation, Integration, Testing and Commissioning of the NS 1 Lot 1032880
complete System with necessary power distribution boards, power point boxes
etc. as per specifications
135 1 Charges for Training and documentation NS 1 Lot 452000
136 2 BAGGAGE SCANNERSupply, Installation, Integration, Testing and NS 1 Set 3592745

Commissioning of Hand Baggage X-BIS with all accessories, CTP, operating
console for monitors and keyboard, mounting arrangement for XBIS, Technical
Documentation (soft copy and hard copy), options, overseas patents, and 01
Year onsite warranty after successful SAT etc. Also i/c training and any other
misclleneous item complete in all respect or as approved by engineer-in-
charge.S/I/T/C of 03 KVA UPS with 1 hr battery back-up along with each
Hand Baggage X BIS--Power Distribution Panel with complete set of
accessories
137 1 Supply, Installation, Integration, Testing and Commissioning of Registered NS 1 Set 5440500.00
Baggage X-BIS with all accessories, CTP, operating console for monitors and
keyboard, mounting arrangement for XBIS, Technical Documentation (soft
copy and hard copy), options, overseas patents, and 01 Year onsite warranty
after successful SAT etc. Also i/c training and any other misclleneous item
complete in all respect or as approved by engineer-in-charge.S/I/T/C of 05
KVA UPS with 1 hr battery back-up along with each Registered Baggage X
BIS--Power Distribution Panel with complete set of accessories
138 1 K) SUB ESTIMATE FOR FIRE FIGHTING APSS 1 Set 390000

SUB HEAD -1 (WET RISER SYSTEM - PUMPING EQUIPMENTS)
Supply, Installation, Testing and Commissioning of Electric Driven Main Fire
Pump suitable for auto operation & consisting of following: complete in all
respect as required.
a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body
& bronze impeller with stainless steel shaft, mechanical seal to ensure a
minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified
flow of 2280 lpm at 70 Mtr. head 0 conforming to IS 1520
b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM,
suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for
enclosure, horizontal foot mounted type with Class-'F' insulation, conforming
to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation
bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti vibration pads.
Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
139 1 Supply, Installation, Testing and Commissioning of Diesel Engine Driven APSS 1 Set 678000
Main Fire Pump suitable for auto operation and consisting of following:
complete in all respect as required.
a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze
impeller with stainless steel shaft, mechanical seal to ensure a minimum
pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of
2280 lpm at 70 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming
to relevant BS & IS standard complete with auto starting mechanism, 12 Volts
/ 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended
upto 1 m. outside pump house duly insulated with 50mm thick glass wool with
1.0mm thick alluminium sheet cladding, residential silencer, instruments and
protection as per specification, stop solenoid for auto stop in the event of fault
with audio indications, painted with post office red colour etc as required.
Makes of Engines : Kirloskar / Cummins.
Makes of Pumps : Kirloskar / Mather&Platt
140 1 Supplying, Installation, Testing and Commissioning of Electric Driven APSS 1 Set 77860
Pressurization Pump (Jockey Pump) suitable for auto operation and
consisting of following: complete in all respects as required.
impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70
Mtr head conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable for operation on
415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure,
horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
141 1 Supplying, Installation, Testing and Commissioning of electric driven Terrace APSS 1 Set 62450
pump suitable for automatic operation and consisting of following: complete in
all respect as required.
impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 45
Mtr head conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable for operation on
415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure,
horizontal foot mounted type with Class-'F' insulation, conforming to IS-325
Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens / ABB
/ Kirloskar
142 1 Fabricating, Supplying, Installation, Testing and Commissioning Air Vessel of APSS 1 Nos 12080
continuous welded construction with flanged discharge header in pump house
fabricated out of 10 mm thick MS sheet, Air Release Valve, complete with
drain arrangement with 25 mm dia gun metal ball valve complete with all
accessories etc. as required of the following sizes
2 Meter high and 450 mm dia suitable to operate Jockey Pump, Main Fire
Pump & Diesel Engine Driven Fire Pump complete with all pressure switches
as per specifications as reqd.
143 14 SUB HEAD - II - (HYDRANTS SYSTEM) APSS 1 Each 8125

Supplying and fixing single headed Internal / External hydrant valve with
instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI
marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain
as required.
Makes: Audco / Kirloskar / BDK /H Shankar/ Leader/ Zolotto / Intervalve.
144 28 Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia APSS 1 Each 6140
Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc
conforming to IS 636 (Type -A) as required.
Makes: Newage/ Winco/ Padmini / Safex
145 14 Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal APSS 1 Each 2530
internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable
for instantaneous connection to interconnect hose pipe coupling as required.
Makes: Newage/ Winco/ Padmini / Safex.
146 10 Supplying and Fixing First Aid Hose Reel, wall mounting swinging type APSS 1 Each 7500
complete with drum & bracket of MS construction, spray painted in Post office
Red, confirming to IS 884/1995 with upto date amendments, complete with
the following as required.
36 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced) Type - 2
as per IS : 12585
20 mm dia. ball valve & nozzle.
Drum and brackets for fixing the equipments on wall.
Connection from riser with 40 mm dia (Gun metal) stop valve & M.S. Pipe.
147 6 Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of NoAPSS
16 gauge SWG
1 CRCA
Eachsheet with
32506mm thick glazed glass door incl
148 10 Providing & fixing angle iron (40mm x 40mm x 5mm ) door frame and MS sheet 2.27/ DSR 1 Each 4832
(2mm thick)
cum glass shutter of size 2.1 mtr x 1.2 mtr (N.S) with 25mm x 25mm x 3 mm
angle frame all around & stiffened in between i/c hinges, handle, locking
arrangement, painting with approved synthetic enamel paint i/c sign writing
on glass at internal hydrant including providing & Fixing MS sheet 2mm thick
on remaining portion above door to close opening i/c painting etc as required.
149 160 Providing fixing, testing and commissioning of 15mm size quartzoid bulb type sprinklers
6.1.2of rating
1 68ºEach
C. pendent /490
side wall with required accessories
150 1 SITC of sprinkler installation valve 9.84 1 Each 9500

Providing, fixing, testing, commissioning of installation control valve of Cast
iron body and brass / Bronze working parts comprising of water, motor alarm,
bronze seat clapper, and clapper arm, hydraulically driven mechanical gong
bell to sound continuous alarm when the Wet riser / Sprinkler system
activates, pressure gauges, emergency releases, strainer, pressure switch, cock
valve complete with drain valve and bypass , test control box, ball valves, Ms
pipe of required size, flanges, orifice plate, gasket etc of size 150mm dia as
required.
Makes : HD / TYCO / NEWAGE
151 4 Providing and fixing Flow Switches in 100mm dia MS pipe. Makes : System Sensor 9.97.2
/ Switzer / Approved
1 Eachmakes 5375
152 1 Providing and fixing Flow Switches in 150 mm dia MS pipe. 9.101.2 1 Each 7500
Makes : System Sensor / Switzer / Approved makes
153 1 Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos Gun metal
10.2Male instantaneous
1 Each inlet couplings
9100 complete with cap and cha
154 1 Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos 10.19 1 Each 6900
Gun metal Male instantaneous inlet couplings complete with cap and chain as
required for 100mm dia MS pipe connection, conforming to IS 904 as required.
155 230 SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES) SLTC of M.S. pipe on 10.20 1 Meter 3210
surface Providing , laying, testing & Commissioning of following classes MS
pipes conforming to IS 3589 and 1239 including fittings like elbows, tees,
flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes (b) 200 mm dia 'C' Class
156 780 SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES) SLTC of M.S. pipe on 10.25.1 1 Meter 2400
Makes: Jindal / Hissar / Tata pipes (d) 150 mm dia 'C' Class
Makes: Jindal / Hissar / Tata pipes (f) 100 mm dia 'C' Class
Makes: Jindal / Hissar / Tata pipes (h) 80 mm dia 'C' Class
Makes: Jindal / Hissar / Tata pipes (j) 65mm dia 'C' Class
160 50 SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES) SLTC of M.S. pipe on 21.1.1.2 1 Meter 600
Makes: Jindal / Hissar / Tata pipes (l) 50 mm dia 'C' Class
161 45 SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES) SLTC of M.S. pipe on 21.1.2.2 1 Meter 512
Makes: Jindal / Hissar / Tata pipes n) 40 mm dia 'C' Class
Makes: Jindal / Hissar / Tata pipes (o) 32 mm dia 'C' Class
Makes: Jindal / Hissar / Tata pipes (q) 25 mm dia 'C' Class
164 600 Supplying and wrapping the anticorrosive material for buried pipes with 21.13 1 Meter 45
coating of Primer and wrapping with 4 mm thick polymer corrosion resistant
tape as per IS : 10221 with 15 mm overlap as per specificatios. 150 mm dia
165 10 Supplying and wrapping the anticorrosive material for buried pipes with 21.16.2 1 Meter 30
coating of Primer and wrapping with 4 mm thick polymer corrosion resistant
tape as per IS : 10221 with 15 mm overlap as per specificatios. 80 mm dia
166 2 Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves conforming to
25.1
IS 13095/1991
1 Each
(Reaffirmed
11849
1998) excluding transportation, CE
167 14 Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves conforming 25.2
to IS 13095/1991
1 Each
(Reaffirmed
7631
25.2
IS 13095/1991
1 Each
(Reaffirmed5088
25.2
IS 13095/1991
1 Each
(Reaffirmed3812
25.2
IS 13095/1991
1 Each
(Reaffirmed3067
171 7 Providing, installation, testing and commissioning of dual plate non - return 25.2 1 Each 4000
valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI
bolts, nuts, washers etc as required
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
150 mm dia
100 mm dia
80 mm dia
174 3 Providing and fixing 25 mm dia inspecting & testing assembly with gunmetal valve,25.2
gunmetal 1sight glass(if required),
5633 bypass valve & connected to
175 6 Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve 25.3 1 Each 1250
176 2 Providing and fixing resilient rubber neoprene lined single arch vibration eliminators25.3
suitable for
1 raw Each
water upto 45
5436
deg. C. temperature working press
177 3 Providing and fixing resilient rubber neoprene lined single arch vibration eliminators25.4
suitable for
1 raw Each
water upto 45
6644
178 5 Providing and fixing resilient rubber neoprene lined single arch vibration eliminators NS
suitable for
1 raw Each
water upto 45
7852
179 8 Providing and fixing M.S. epoxy coated puddle flanges of required size to water NS 1 Each 4228
tanks as per standard details fabricated from heavy duty pipe and 6 mm
thick M.S. Plate & 600 mm length with 3 coats of food grade epoxy paint. 150
mm dia
180 2 Providing and fixing M.S. epoxy coated puddle flanges of required size to water NS 1 Each 5316
tanks as per standard details fabricated from heavy duty pipe and 6 mm
thick M.S. Plate & 600 mm length with 3 coats of food grade epoxy paint. 200
mm dia
181 5 Supply, installation, testing and commissioning of Bourden type, stainless NS 1 Each 675
steel dial type pressure gauge with isolation valve and pipe having calibration
of 0-16 kg/cm2.
MAKES: HGURU / FIEBIG and Approved makes
182 6 Providing and fixing of Pressure Switch in the MS pipe Line including connection etc NS
as required.
1 Makes
Each
: Danfoss2500
/ Indfoss / Approved makes
183 1 Supplying, installation, testing and commissioning of annunciation panel made NS 1 Each 99263
out of not less 1.6 mm thick CRCA sheet powder coated in approved colour
with locking arrangement, audio and visual indication of fault and operation of
automatic sprinkler, system monitoring including providing and fixing the
following i/c connections interconnections etc. complete as required. The panel
shall be Micro-processor type/solid state type. Monitoring 4 Nos. of flow
switches. Monitoring the open circuit, short circuit and earth fault in control
cable between panel and flow switches. Battery charger trickle cum boost to
take complete load of annunciation panel complete with indication of low
Battery voltage, mains failure and other accessories including providing and
fixing of 2 Nos. 12 volts 24 AH each sealed maintenance free batteries and with
audible alarm as reqd
184 2 Supplying, installing, testing and commissioning approved make CI body Foot NS 1 Each 13280
Valve with brass strainer with necessary flanges, nuts and bolts etc., complete
on to the suction line.Rate as per the lowest quotation of Bharat Fire Safety
Engineers.
Makes:Normex & approved makes 150 mm dia
185 5 Supplying and fixing of Fire Man's axe with heavy insulated rubber as per standard conforming
NS 1to IS 926.
Each 846
186 15 Providing, fixing, testing and commissioning of Sprinkler Flexible Joint of NS 1 Nos 1208
25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated
Ring & O Ring - for Sprinklers Drop, which shall include necessary supports
with a maximum working pressure of 14 kgf/cm2 and temperature rating of
225oF UL/ FM Listed. The length of Flexible Sprinklers Pipe shall be :- 1200
mm
187 15 Providing, fixing, testing and commissioning of Sprinkler Flexible Joint of NS 1 Nos 1450
25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated
Ring & O Ring - for Sprinklers Drop, which shall include necessary supports
with a maximum working pressure of 14 kgf/cm2 and temperature rating of
225oF UL/ FM Listed. The length of Flexible Sprinklers Pipe shall be :- 1500
mm
188 8 SUB HEAD - IV - (FIRE EXTINGUISHERS) NS 1 Nos 9180
Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers,
9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate
base powder-90 complete with discharge hose and wall mounting bracket,
2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all
class of fires (A, B, C & Electrical fires) with 5 years warranty Including
transportation, all taxes and all labour charges etc complete.
Makes : Cease Fire / Minimax
189 8 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to NS 1 Nos 9961
IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE
certified and fitted with ISI marked controlled valve confirming to IS:3224, high
pressure 1 Mtr discharge hose & horn complete with initial gas charged with
carrying handle with wheels and wall mounting bracket. Squeeze lever
discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss
with 2 years warranty Including transportation, all taxes and all labour
charges etc complete.
Makes: Cease Fire / Minimax
190 8 Supply and fixing of DCP powder type cylindrical shape fire extinguisher 5 Kg NS 1 Each 3100
with fixing hangers, hose, brackets, screws to required size etc., complete as
per IS:13849 - wall mounted type. Makes: Minimax / Safex / Kenex / Reliance
191 1 SUB HEAD - V - Gas flooding system (FIRE EXTINGUISHERS) NS 1 Nos 105857
Supply, installation, testing & commissioning of FM-200 Seamless Cylinder
CCOE Approved, (100Ltrs.) including Valve assembly and arrangement for
supervisory switch connection for monitoring linder pressure, a pressure gauge
with a safety burst disc and a safety cap, 75 kg FM-200 Gas (1,1,1,2,3,3,3
Hepta fluro propane) manufactured by Dupont, Electric Control Head operated
electrically from the Detection & Control System or locally with a manual lever
on the control head, Manual Operated Control Head, Manual Activation
Mechanical box, SS Wire (12 mtrs), Wire Sleve Aluminum - (12 mtrs.), Corner
Pulleys (6 nos.), End of Line (2 nos.), Flexible discharge Hose route the FM-200
Agent from the storage cylinders to the discharge piping by a flexible rubber
hose with wire braided reinforcements.This hose is connected to the discharge
outlet of FM-200 cylinder valve and terminates at the system piping or
discharged manifold, M S Container Strap, Gas Release Panel with battery
back up.(1W+1S) 2Nos, Manual Release Switch, Manual Abort Switch, 2 Nos.
Conventional Smoke Detector with base, Conventional Hooter, Piping, fittings
& supports, etc.
Pipe (S) : C.S. Seamless To ASTM A-106, SCH. 40.
The detail as per given Below.
FM-200 Seamless Cylinder CCOE Approved, (100 Ltrs.) (Siemens)

192 1 Valve assembly and arrangement for supervisory switch connection NS 1 Nos 135497
for monitoring linder pressure, a pressure gauge with a safety burst
disc and a safety cap.
193 75 FM-200 Gas (1,1,1,2,3,3,3 Hepta fluro propane) manufactured by NS 1 Kg 5081

Dupont. (Siemens)
194 1 Electric Control Head operated electrically from the Detection & NS 1 Nos 93154
Control System or locally with a manual lever on the control head.
195 1 Manual Operated Control Head NS 1 Nos 12703
196 1 Manual Activation Mechanical box. NS 1 Nos 8469
197 1 SS Wire (12 mtrs), Wire Sleve Aluminum - (12 mtrs) NS 1 Lot 6521
198 1 Corner Pulleys (6 nos.), End of Line (2 nos.) NS 1 Nos 7622
199 3 Discharge Nozzles are designed to provide the proper flow rate and distribution NS 1 Nos 6775
of FM-200 to total flood a hazard area : 180 deg. / 360 Deg.
200 1 Flexible discharge Hose route the FM-200 Agent from the storage NS 1 Nos 14820
cylinders to the discharge piping by a flexible rubber hose with wire
braided reinforcements. This hose is connected to the discharge outlet of FM-
200 cylinder valve and terminates at the system piping or discharged manifold.
201 2 M S Container Strap NS 1 Nos 3387
202 1 Gas Release Panel with battery back up. (Raval) NS 1 Nos 93154
203 1 Manual Release Switch. (Raval) NS 1 Nos 6351
204 1 Manual Abort Switch (Raval) NS 1 Nos 6351
205 2 Conventional Smoke Detector with base (Raval) NS 1 Nos 3260
206 1 Conventional Hooter. (Raval) NS 1 Nos 7622
207 120 2C x 1.5 Sq.mm Cable NS 1 Mtr. 169
208 1 Piping, fittings & supports, etc. NS 1 Lot 119971

Pipe (S) : C.S. Seamless To ASTM A-106, SCH. 40
209 492 L) SUB ESTIMATE FOR ELECTRICAL WORKS DSR-1.3.3 1 Point 1094
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.
mm FRLS PVC insulated copper conductor single core cable in surface /
recessed steel conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable etc. as required.. Group C
210 16 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper DSR-1.4 1 Point 1094
conductor single core cable in surface / recessed steel conduit, 2 way modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable etc. as required.
211 1465 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper DSR-1.5 1 Metre 239
conductor single core cable in surface/ recessed steel conduit alongwith 1 No.
4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
212 100 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper DSR-1.6 1 Metre 366
conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos.
4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
213 494 Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes DSR-1.7.2 1 Metre 206
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed
steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
216 200 Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes DSR- 1 Metre 653
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed 1.7.10
217 100 Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes DSR- 1 Metre 930
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed 1.7.11
218 5 Supplying and fixing following modular switch/ socket on the existing modular DSR- 1 Each 114
plate & switch box including connections but excluding modular plate etc. as 1.24.8
required. Bell push
219 135 Supply of 1 Module Modular type Electronic step type Fan Regulator. ASOR- 1 Each 319
ELEC-
1.9.30
220 50 Supplying and fixing modular blanking plate on the existing modular plate & DSR-1.26 1 Each 24
switch box excluding modular plate as required.
221 800 Supplying and fixing suitable size GI box with modular plate and cover in front DSR-1.31 1 Each 313
on surface or in recess, including providing and fixing 3 pin 5/6 amps modular
socket outlet and 5/6 amps modular switch, connection etc. as required.
222 688 Supplying and fixing suitable size GI box with modular plate and cover in front DSR-1.32 1 Each 406
on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps
modular socket outlet and 15/16 amps modular switch, connection etc. as
required.
223 20 Supply and fixing of Push type button motor starter for A.C Units including ASR-ELEC- 1 Each 799
internal connection and labour charges for Flush Mounting etc.,complete. 11.1.19
224 33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ DSR-1.33 1 Each 46
wooden block including connection etc as required.
225 33 Supply & fixing of 6A / 10A 1 Module Modular Bell Push with Neon Indicator. ASR-ELEC- 1 Each 90
1.9.22
226 5 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, DSR-1.38 1 Each 61
complete as required.
227 135 Installation, testing and commissioning of ceiling fan, including wiring the DSR-1.45 1 Each 132
down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable, including providing and fixing
phenolic laminated sheet cover on the fan box etc. as required.
228 33 Installation of exhaust fan in the existing opening, including making good the DSR- 1 Each 224
damage, connection, testing, commissioning etc. as required. Upto 450 mm 1.50.1
sweep
229 33 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of DSR-1.51 1 Each 99
all sizes.
230 15 Supply & fixing of 8 Way SPN DB with IP 43 Protection as per IS:13032 and ASR-ELEC- 1 Each 956
suitable for 8 Nos S.P out goings and for 1 No Incommer etc complete. 2.12.17
231 2 Supply & fixing of 7 Segment 4 Way TPN DB with IP 42 Protection with ASR-ELEC- 1 Each 6500
provision for FPMCB / Isolator / RCCB / RCBO as incomer, 3Nos DPMCB / 2.12.32
Isolator / RCCB / RCBO as sub incomer and 12 Nos SPMCB's as out going.
232 444 Supply & fixing of 6-32A 10KA SP MCB, C/D Curve ISI Mark. ASR-ELEC- 1 Each 201
2.9.1
233 12 Supply & fixing of 40-63A FP MCB, C/D Curve ISI Mark. Makes: Legrand / ASR-ELEC- 1 Each 1899
Schneider. 2.9.8
234 36 Supply & fixing of 63A 2 Pole RCCB 30mA. ASR-ELEC- 1 Each 3300
2.11.2
235 12 Supply of 40A 2 Pole RCCB 30mA, ASR-ELEC- 1 Each 2700

2.11.1
236 25 Supply & fixing of 63A 2 Pole RCCB 30mA, ASR-ELEC- 1 Each 3300
2.11.2
237 33 Supply & fixing of 20A SP Plug and Socket in SS enclosure. ASRELEC- 1 Each 590
2.12.67
238 5 Supply & fixing of 20A TP Plug and Socket in SS enclosure. ASRELEC- 1 Each 925
2.12.68
239 5 Supply & fixing of 32A TP Plug and Socket in SS enclosure. ASRELEC- 1 Each 1300
2.12.69
240 50 Supplying and fixing single pole blanking plate in the existing MCB DB DSR-2.11 1 Each 7
complete etc. as required.
241 12 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of DSR-2.21 1 Each 149
mild steel, at least 2 mm thick, and vitreous enameled white on both sides,
and with inscription in single red colour on front side as required.
242 4 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of DSR-2.22 1 Each 163
mild steel, at least 2 mm thick, and vitreous enameled white on both sides,
and with inscription in single red colour on front side as required.
243 20 Supply and Installation of 600mm x 50mm x 2mm thick GI perforated cable ASR-ELEC- 1 1RM 672
tray without cover along with required angle supports, with coupler plates, 4.6.2
Anchor bolts and nuts etc complete and the tray should be fitted on the wall /
Ceiling etc. complete.
244 20 Supply and Installation of 450mm x 50mm x 2mm thick GI perforated cable ASR-ELEC- 1 1 RM 591.5
tray with cover along with required angle supports, with coupler plates, Anchor 4.6.3
bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling
etc. complete.
245 200 Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable ASRELEC- 1 1 RM 507.5
246 100 Supply and Installation of 150mm x 50mm x 2mm thick GI perforated cable ASR-ELEC- 1 1 RM 388
247 40 Supply and Installation of 600mm x 75mm x 2mm thick GI Ladder type cable ASR-ELEC- 1 1 RM 385
tray along with required angle supports, with coupler plates, Anchor bolts and 4.6.8
nuts etc complete and the tray should be fitted on the wall / Ceiling etc.
complete.
248 56 Supply and fixing of 100mm x 38mm G I Raceways of 2mm thick with top ASR-ELEC- 1 1 RM 460
cover and required hard ware etc complete. 7.1.33
249 16 1 RM 1035
250 15 Supply and fixing of 172mm x 52mm G.I. Junction box of 2mm thick for direct ASR-ELEC- 1 Each 340
acces to cables at the inter section of Raceways. 7.1.39
253 483 Installation, testing and commissioning of pre-wired, fluorescent fitting / DSR-1.41 1 Each 100
compact fluorescent fitting of all types, complete with all accessories and tube
etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable and earthing etc. as required.
254 135 Installation, testing and commissioning of ceiling fan, including wiring the DSR-1.45 1 Each 132
down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated,
copper conductor, single core cable, including providing and fixing phenolic
laminated sheet cover on the fan box etc. as required.
255 33 Installation of exhaust fan in the existing opening, including making good the DSR- 1 Each 224
damage, connection, testing, commissioning etc. as required. Upto 450 mm 1.50.1
sweep
256 33 Extra for fixing the louvers/ shutters complete with frame for a DSR-1.51 1 Each 99
exhaust fan of all sizes.
257 23 Supplying of All Lights fixtures shall be complete with LED lamps, control gear ASR-ELEC- 1 Each 1680
& power factor improvement capacitor complete with all required accessories. 3.9.12
Samples of all the fixtures with all available colour shall be submitted to the
architect/ client/ Project Manager before supply & approval is taken.
Please check the fixtures final quantity from the Architect / Project Manager
before ordering and be sure of actual requirement prior to ordering.
Supply and Transportation of 12W Down lighter with system lumens of

1050lm, suitable for Recessed / Surface mounting made of diecast alluminium
body with powder coating, acrylic diffuser with Driver, operating voltage range
of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<15%, with high
power LED's having efficacy of > 120 lumins/watt,CCT: 3000K - 5700K,
minimum CRI>70, .etc., complete with 3 years warranty.
258 167 Supply and Transportation of 18W Down lighter with system lumens of ASR-ELEC- 1 Each 2722
1580lm, suitable for Recessed / Surface mounting made of diecast alluminium 3.9.13
body with powder coating, acrylic diffuser with Driver, operating voltage range
of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,THD<15%, with high
power LED's having efficacy of > 120 lumins/watt,CCT: 3000K - 5700K,
minimum CRI>70, .etc., complete.
259 40 Supply and transportation of 16W/20W, 1600/2000 lumens, T8,1200mm ASR-ELEC- 1 Each 1548
length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, 3.9.15
Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT:
3000K - 5700K, minimum CRI>70, .etc., complete.
260 10 Supply of 1 x 11W Mirror light with all standard accessories diffuser. ASR-ELEC- 1 Each 678
3.6.1
261 10 Supply of Bulk head fitting with cast aluminium enamel painted body with ASR-ELEC- 1 Each 396
water tight, clear glass with wire guard hinged with lock and key arrangements 8.1.4
etc., complete.
262 221 Supply of 40W recess/surface mounted Slim panel LED light. NS 1 Each 4645
263 10 Supply of LED exit signage of Box size in mm 325x425x365. NS 1 Each 3694
264 2 Supply of LED aviation light luminaire. NS 1 Each 8188

265 135 Supply of 48" (1200mm) Sweep , 5 Star rated Ceiling Fan, with double ball ASR-ELEC- 1 Each 1870
bearings , power input not more than 53W , air delivery more than 218 cubic 5.1.4
meter/min and service value 4.11, but without Regulator.
266 25 Supply of 12" (300mm) Light duty exhaust fan with wire guard etc complete. ASR-ELEC- 1 Each 1350
5.1.14
267 8 Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic ASR-ELEC- 1 Each 3220
blades with Mark. 5.1.17
268 478 Supply and transportation of LED Driver with input line voltage 120V-270V ASR-ELEC- 1 Each 375
AC, 50Hz with surge protection more than 2.5 KV, IP20, suitable for 12 / 18 W 3.9.25
LED down lighter with 2 Years Warranty.
269 1 Supply,Installation,Testing & Commissioning of micro processor controlled NS 1 Set 1236238
True On line double conversion, Stand Alone mode 3 Phase input and 3 phase
415V output UPS & each UPS consisting of followings :
1 No. 100% Rectifier + Inverter, Integrated in UPS module, Battery Circuit
breaker, Galvanic Isolation transformer at the inverter output of UPS Module ,
Inbuilt Static switch for bypass and inverter in UPS module, Manual
Maintenace bypass, Sealed Maintenance free batteries for 20 minutes backup
time with UPS & inerconnectors, Rack and accessories and UPS to battery DC
cable upto 10 meters. Ratings of the UPS as follows :- 2x15 kVA UPS operating
in parallel redundant configuration(for Emergency Lighting,Work Stations, Fire
Alarm, Server and CCTV,OTS ).
270 1 Supply and installation of 7.5KVA, 180/192VDC true on line UPS system IGBT ASR-ELEC- 1 No. 94500
technology pure sine wave out put, double conversion with auto and manual 11.1.7
static by pass switch single phase input / Single phase output.
271 2 Supply of Advanced lighting protection with capturing head of 135 - 210mm ASR-ELEC- 1 No.s 115200
diameter, 205 -580mm height and 4.60 - 4.940 kgs , and having Rod length 6.5.16
760mm, weight 1.795 kgs with stainless steel rod, working on the principle of
(ESE) Early Streamer Emission technology, having a coverage radius of 79mts
when mounted on 10 - 15 mts height of existing lattice tower giving level 1
protection and anticipation emission time of 60 micro seconds/72 micro
seconds. The NIMBUS is manufactured according to standard NFC 17 102 and
UNE 21186-96 including functional integrity etc Complete.
272 2 Installation and commissioning of advanced lighting protection systems which ASR-ELEC- 1 Nos. 31200
includes 6.5.17
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of Earth Electrodes 6. Interconnection between the Electrodes
7. Termination of down conductor to earth bus etc complete.
273 2 Supply & fixing of electro-Mechanical counter. ASR-ELEC- 1 Nos. 16000

6.5.18
274 2 Providing earth electrode of low carbon steel rod of 17mm dia coated with 250 ASR-ELEC- 1 Nos. 9600
microns thick copper 3mtr long with clamps and 2 bags of LORESCO 6.5.19
ZEROLITE back fill compound etc complete.
275 1 Supply & fixing of down conductor of 1x70sqmm single core PVC insulated ASR-ELEC- 1 Nos. 410
unarmoured copper conductor cable of ISI mark. 6.5.20
276 14 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm DSR-6.2 1 Metre 304
long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I.
base plate including holes etc. complete as required.
277 10 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or DSR-6.4 1 Each 57
any other metallic object) by riveting / nut bolting/ sweating and soldering etc
as required.
278 2100 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of DSR-6.7 1 Metre 66
wall for lightning conductor complete as required.(For horizontal run)
279 120 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of DSR-6.8 1 Metre 100
wall for lightning conductor complete as required.(For vertical run)
280 22 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 DSR-6.12 1 Each 73
mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc.
281 1050 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in DSR-6.14 1 Metre 112
ground as required.
282 1500 Supply & fixing of 2 Pair, 0.5mm telephone copper wire. ASR-ELEC- 1 RM 10.1
7.1.1
283 1500 Supply & fixing of LAN Cable cat - 6 UTP cable. ASR-ELEC- 1 RM 25.8
7.1.3
284 50 Supply & fixing of Cat 6 RJ-45 information outlets including duel face plate. ASR-ELEC- 1 Each 340
7.1.4
285 3 Supply & fixing of 24 Port switches. ASR-ELEC- 1 Each 5200

7.1.5
286 50 Supply & fixing of 7 feet length moulded patch cord. ASR-ELEC- 1 Each 220
7.1.8
287 50 Supply & fixing of 3 feet length moulded patch cord. ASR-ELEC- 1 Each 200
7.1.9
288 3 Supply & fixing of 24 port patch panels. ASR-ELEC- 1 Each 6500
7.1.10
289 100 Supply & fixing of 10 Pair telephone Copper wire ASR-ELEC- 1 RM 40
7.1.13
290 6 Supply & fixing of 10 pair Telephone distribution box with back mount frame, ASR-ELEC- 1 Each 650
krone connector, powder coated metal body with lock and key arrangement. 7.1.16
291 2 Supply & fixing of 6U floor mounting net work rack with power spike including ASR-ELEC- 1 EACH 4700
all accessories. 7.1.20
292 1 Supply & fixing of 9U floor mounting net work rack with power spike including ASR-ELEC- 1 EACH 5580
all accessories. 7.1.21
293 500 Supply & fixing of 12 Core (Indoor / Out door), Single mode armourd, Optic ASR-ELEC- 1 EACH 105
fibre cable. 7.1.27
294 1 Supply & fixing of 6 port fibre distribution unit. (FDU / LIU) loaded with ASR-ELEC- 1 RM 7500
couplers etc complete. 7.1.28
295 1 Supply & fixing of 12 port fibre distribution unit. (FDU / LIU) loaded with ASR-ELEC- 1 EACH 9500
couplers etc complete. 7.1.29
296 1 Supply & fixing of Subscriber connector (SC) to SC / LC patch card of 1 Mtr ASR-ELEC- 1 EACH 2000
length. 7.1.30
297 1 Supply & fixing of Pigtails for fibre core connectivity. ASR-ELEC- 1 EACH 350
7.1.31
298 150 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper DSR-1.19 1 Metre 29
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
required.
299 50 Supply & fixing ofModular socket type Telephone jack with Connector. ASOR- 1 Each 100
ELEC-
300 10 Supply & fixing of Modular co-Axial socket type TV Antenna outlet. 1.9.15
ASOR- 1 EACH 98
ELEC-
301 125 Supplying and fixing of Hot Dip Galvanized Modular Box 1 or 2 Module box 1.9.16
ASOR- 1 EACH 60
ELEC-
302 3200 Supplying and fixing of following sizes of medium class PVC conduit along with 1.3.1
DSR-1.21 1 Meter 69
accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required. 25 mm
303 1 Supply Installation, Testing and Commissioning of Server Based EPABX Fully NS 1 No.s 750300
Computerized IP System, SIP Compliant. Multi slot 19: U Rack Mountable 2U
Rack Expandable upto 700 Ports Presently Configuration as Below
CO Line 10 Nos.
PRI(30 Channel) 2 Nos.
Digital Extension Circuits 10 Nos.
Analog Extension Circuits 110 Nos.
64 SIP VOIP Trunk 1 Nos.
ntegrated Viocemail System 1 Nos.
304 1 Supply Installation, Testing and Commissioning of 4 Level IVR software with 6 NS 1 Nos. 167597
different languages and 4 time schedule with Supply Installation, Testing and
Commissioning of PC(As per OEM).
305 1 Supply Installation, Testing and Commissioning of Digital Phone (32Key). NS 1 Nos. 31988
306 10 Supply Installation, Testing and Commissioning of Digital Phone (12Key). NS 1 Nos. 18659
307 1 Supply Installation, Testing and Commissioning of Cordless Phone with base NS 1 Nos. 10663
dilling minimum 80-100 meters range.
308 45 Supply Installation, Testing and Commissioning of Analog Speaker Phone with NS 1 Nos. 2066
backlight and 4 memorable Key.
309 30 Supply, installation, testing and commissioning of ceiling mounted indoor NS 1 Nos. 11000
colour dome type camera 1/3" or 1/4" CCD 3.8 -10 mm Varifocal lens, auto
iris, 580 TVL , Sensitivity 0.05 lux (color) and 0.005 lux (IR cut filter, B/W),
Signal-to-Noise Ratio >50 dB ,True Day/ Night, Privacy zone ,OSD Menu for
Easy Operation, Varifocal Manual zoom and focus adjustment, Connectors,
Lens, Camera Mounts, including all Ancillary Equipment & accessories
complete as per specifications. The AC power supply to CCTV as required shall
be in electrical vendor scope. (All indoor areas)
310 8 Supply, installation, testing and commissioning of Outdoor colour Bullet Type NS 1 No. 19001
Camera 1/3" or 1/4" CCD 3.8-10 mm Varifocal lens, inbuilt IR (infrared)
illuminators with 0 lux, 0.15 lux (color) ,720 TVL, high sensityvity, high light
compensation,wide dynamic range, Signal-to-Noise Ratio >50 dB ,True Day/
Night, Noise Reduction, OSD Menu for Easy Operation, Varifocal Manual zoom
and focus adjustment, Connectors, Lens with sun-shield, Connectors, Lens,
Camera Mounts, IP 66 housing and mounted on wall including all Ancillary
Equipment & accessories complete as per specifications. The AC power supply
to CCTV as required shall be in electrical vendor scope.(Outdoor areas-Wall).
311 14 Supply, installation, testing and commissioning of Outdoor colour Bullet Type NS 1 No. 22000
Camera 1/3" or 1/4" CCD 3.8-10 mm Varifocal lens, inbuilt IR (infrared)
illuminators with 0 lux, 0.15 lux (color), 720 TVL, high sensityvity, masking of
vehicle head light, high light compensation, wide dynamic range, Signal-to-
Noise Ratio >50 dB ,True Day/ Night, Noise Reduction, OSD Menu for Easy
Operation, Varifocal Manual zoom and focus adjustment, Connectors, Lens
with sun-shield, Connectors, Lens, Camera Mounts, Power Supply, IP- 66
housing and mounted on existing street light pole including all Ancillary
Equipment & accessories complete as per specifications. The AC power supply
to CCTV as required shall be in electrical vendor scope(Outdoor areas-Pole).
312 52 Supply, installation, testing and commissioning of Surge protector for Video NS 1 No. 1500
Balun Pairs. (Reputed)
313 1 Supply, installation, testing and commissioning of 12VDC Power Supply for 52 NS 1 No. 16550
nos. CCTV Cameras.
314 4 Supply, installation, testing and commissioning of Real time triplex Digital NS 1 No. 125000
Video Recorder(16 Chanel) for CCTV System as per specification and consisting
of 16 camera inputs and 2 no. monitor output, 2 TB Hard disk storage and
inbuilt DVD R/W drive.
315 3 Supply, Installation and commissioning of 32" Full HD LED Professional NS 1 No. 34109
Display for Monitoring with mounting accessories.
316 1 Supply, installation, testing and commissioning of 42 u/9" width, 650 mm NS 1 No. 25000
depth, rack assembly made of alluminium channels for the DVR and
associated equipment.
317 5000 Supplying and drawing following sizes of FRLS PVC insulated copper 1.17 1 Metre 37
conductor, single core cable in the existing surface/ recessed steel/ PVC
conduit as required. 2 x 1.5 sq. mm
318 4000 Supplying and fixing of following sizes of steel conduit along with accessories in 1.2 1 Metre 147
surface/recess including painting in case of surface conduit, or cutting the
wall and making good the same in case of recessed conduit as required 25 mm
319 1000 Supplying and fixing of following sizes of medium class PVC conduit along with 1.21 1 Metre 69
accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required 25 mm
320 2500 Supply & laying of 75 Ohms (RG 59/U) copper conductor copper screen Co- NS 1 Metre 19
axial cable in existing conduit as per specification.
321 5 Supply, Installation , Testing and Commissioning of Micro processsor based 5.1 1 Nos 53530
access control system Expandable, Networkable . TCP/IP protocol compatible
disributed Intelligence, Supporting 2/4 Readers for 2/4 door can be
expandable up to 32 Controller / 64 Reader up to distance 1 K.M, memory
20000 user per controller and 30000 event buffer, 24 time zone Levels,
complete as per requirement.
322 10 Supplying,installation, testing & commissioning of Centralised Power 5.2 1 Nos. 3481
Supplying 12 volts DC SMPS minimum suitable for operation on 230 volts AC
50 Hz, inclosed in a painted metalic enclosure and one plug top for tapping
power from 5 Amp socket nearby etc.
323 Supplying,installation, testing & commissioning of Web Based Access Control
Software Access software for unlimited users with 3 branches, Global
Antipassback, Area Control, Event and Alarms pop ups, Event and Alarm
Email Service, Door Lock Unlock Sheduling, brief description as mentioned
below:-
324 1 Supplying,installation, testing & commissioning of Centralized access control NS 1 Nos. 174582
software system for multiple companies and branches• Real Anti-passback,
Timed Anti-passback and Global Anti-passback • Full support for any wiegand
based Smart Card Reader, PIN readers, long range readers or Biometric
Readers• Map any input or event to any output in various operating modes
(close on event close, manual close or timed) to realize BMS functionalities
such as CCTV integration, fire alarm integration, alarm on intrusion detection,
signal and light management.• Easy integration with any specialized access
control hardware such as boom barriers, turnstiles or flap barriers• Remote
door alarm monitoring and management Remotely change door lock from Lock
to Unlock to Permanent Lock• Automatic detection and highly user friendly
interface to configure controllers and interfaces • Comprehensive reports via
WEB-INTERFACE (Access Reports)• Useful Tools to automatically manage
database size, to take backups and restore• Reporting service for the periodic.
325 10 Supplying,installation, testing & commissioning of 13.56 MHz Contactless 5.4 1 Nos. 11834
Smart Card Readers Read Range Up to 3.25” (8.9 cm), Dimensions 4.8 cm x
10.3 cm x 2.3 cm, Power Supplying 5-16 VDC, Operating Temperature, Card
Compatibility 16k bit (2k Byte), 32k bit (4k Byte)UL 294/cUL, Canada
Certification.
326 1 Supplying, installation, testing, commissioning of Intel coreI- I-7(letest) 5.5 1 Nos. 234517
Processor with EISA bus and with 3GHz minimum CPU speed, minimum of 8
GB RAM, 512 KB cache, 52X32X52X DVDRW+Blue ray RW Drive & 2TB HDD,
optical Mouse, 106 keys keyboard, 10/100 Mbps Ethernet card, USB
connection & internal modem, with for 32'' LED HDTV over HDMI Port &
Original Vista or Window 7 (Pro.) + M.S. Office (Pro.) loaded, & A4 Color Laser
Jet printer.(For Access control).
327 50 Supplying,installation, testing & commissioning of I CLASS Smart Card. 5.6 1 Nos. 348
328 10 Supplying,installation, testing and commissioning of Emergency Green Box 5.7 1 Nos. 2019
Unit CE/UL Certification NCOM/FARADAY
329 10 Supplying,installation, testing & commissioning of Stainless steel U -Bracket 5.8 1 Nos. 1740
bracket for fully glass door to be used with Electromagnetic Lock CE/UL
Certification.
330 10 Supplying,installation, testing & commissioning of Single Leaf EM lock with 5.9 1 Nos. 5917
holding force of 600 lbs with LED feedback CE/UL Certification NCOM/
FARADAY CE/UL Certification.
331 10 Supplying,installation, testing & commissioning of Stainless Steel Door Release 5.1 1 Nos. 2297
Button with No/NC Contact, CE/UL Certification.
332 500 Supplying and laying of 8 Core 1.00 sq mm Cable 22 AWG, Shielded Cable. 5.11 1 Metre 177
333 50 Supplying and laying of 4 Core 1.00 sq mm Cable 22 AWG, Shielded Cable. 5.12 1 Mtr. 104
334 10 Supplying and Fixing of ''L'' Bracket with Accessories. 5.13 1 Nos. 2019
335 10 Supplying,installation, testing and commissioning of Exit push button. 5.14 1 Nos. 1740
336 1 Supply, Installation, testing and commissioning of wall mounting 2 loop micro ASR-ELEC- 1 Nos. 215294
processor based analog addressable fire alarm Control panel expandable by 9.2.10
minimum 2 additional loops with minimum 80 character LCD display 4 access
levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power
supply, automatic battery charger, 24V SLA batteries suitable for operating the
entire system including tack back units and the hooters/strobes for a
minimum of 4 hours in battery condition the panel shall have suitable power
amplifiers for hooter / strobes the panel shall be capable beeing integrated
with the BMS system and shall include cost of supply, installation of any
additional modules or interfaces required for the same. The panel shall be
completed as per the specification and as required fixing of 2 loop Micro
processor based Fire Alarm control panel with zonal indictions and battery
back up as per detailed specifications.
337 1 Supply, Installation, testing and commissioning of wall mounting 1 loop micro ASR-ELEC- 1 Nos. 188100
processor based analog addressable fire alarm Control panel expandable by 9.2.12
minimum 2 additional loops with minimum 80 character LCD display 4 access
levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power
supply, automatic battery charger, 24V SLA batteries suitable for operating the
entire system including tack back units and the hooters/strobes for a
minimum of 4 hours in battery condition the panel shall have suitable power
amplifiers for hooter / strobes the panel shall be capable beeing integrated
with the BMS system and shall include cost of supply, installation of any
additional modules or interfaces required for the same. The panel shall be
completed as per the specification and as required fixing of 1 loop Micro
processor based Fire Alarm control panel with zonal indictions and battery
back up as per detailed specifications.
338 1 Supply, Installation, testing and commissioning of intellegent analogue ASR-ELEC- 1 Nos. 101080
addressable Repeater panel including the cost of mounting accessories 9.2.14
complete as per specification as required. Makes: Siemens / Morley / Bosch /
Ravel.
339 16 Supply and fixing of addressable wall mounting strobes cum hooters including ASR-ELEC- 1 Nos. 5130
the cost of mounting accessories complete as per specifications and as required 9.2.16
including testing and commissioning.
340 16 Supply and installation of addressable analogue manual call point with ASR-ELEC- 1 Nos. 5325
resetable flexible element to initiate alaram including the cost of mounting 9.2.18
accessories etc. complete.
341 30 Supply and instllation of intallegent analogue addressable photo electric smoke ASR-ELEC- 1 Nos. 5130
detector including cost of base plate etc., complete as per specification with 9.2.20
required fittings and accessories.
342 2 Supply and installation of intallegent analogue addressable rate of rise cum ASR-ELEC- 1 Nos. 4560
fixed temparature heat detectors including the cost of base plate. 75mm dia 9.2.22
MS outlet box for fixing of the detector base, mounting accessories etc.,
complete as per specifications and as required.
343 2 Supply and installation of intalligent analogue addressable multi criterion ASR-ELEC- 1 Nos. 5558
detectors below false ceiling/on ceiling including the cost of base plate. 75mm 9.2.24
dia MS outlet box for fixing of the detector base, mounting accessories etc.,
complete as per specifications and as required.
344 20 Supply and Installation of Intalligent analogue addressable Control Modules ASR-ELEC- 1 Nos. 4655
including the cost of mounting accessories complete as per specifications and 9.2.26
as required.
345 6 Supply and Installation of Intalligent analogue addressable monitor modules ASR-ELEC- 1 Nos. 4655
including the cost of mounting accessories complete as per specifications and 9.2.28
as required.
346 5 Supply and Installation of Intalligent analogue addressable fault isolator ASR-ELEC- 1 Nos. 3800
modules including the cost of mounting accessories complete as per 9.2.30
specifications and complete as required.
347 2200 Supplyinging and drawing following sizes of FRLS PVC insulated copper DSR- 1 Metre 37
conductor, single core cable in the existing surface/ recessed steel/ PVC 1.17.2
350 2500 Supplyinging and fixing of following sizes of steel conduit along with DSR-1.2 1 Metre 147
accessories in surface/recess including painting in case of surface conduit, or
cutting the wall and making good the same in case of recessed conduit as
required 25 mm
351 1 Supply, Installation, Testing and Commissioning of of DSP Based Audio NS 1 Nos. 387659
Controller with inbuilt 500Watt Class- D Amplifire System for Public Address &
Voice evacuation with:- 6 zones, class AB wiring, 8 monitored speaker circuits,
On-panel display & zone keys, 5 audio inputs, Integrated & monitored Fireman
microphone,, Event log incident data records upto 2047 incidents, amplifiers
monitoring with switchover to backup amplifier, 7 band parametric
equalisation. Compliance with EN 60849 , BS 5839 part 8 & EN 54-16
standards(DVA-6 ZONE )
352 1 Supply, Installation, Testing and Commissioning of 500 Watt RMS single NS 1 Nos. 137132
channel Class D Audio Power Amplifiers with following features:- 500W RMS
per channel, Amplifier output 100V/ 70V/4 Ohm, Supply input AC 230/240V-
50Hz DC 24V, short circuit protection. Thermal shutdown, overload protection,
ventilating Fans, THD<0.1%, AC & DC Fuses, SNR > 80dB, (DPA500)
353 1 Supply, Installation, Testing and Commissioning of Soft adressable microphone NS 1 Nos. 109288
console with following features:-6 programmable buttons & 1 all call button,
CAT 5e connection, RS-485 communication protocol, in-built pre-amplifier,
hold & busy LED's, zone LEDs, any button programmable for zones, group
zones, music ON/OFF, music volume, expansion port for adding keypads,
128kB audio storage memory, Unidirectional Condenser Microphone with
Cardio Polar Reception, integrated monitoring speaker, 1000 metres distance
from central PA rack(DVARM)
354 1 Supply, Installation, Testing and Commissioning of Music source complete as NS 1 Nos. 17403
required.
355 5 Supply, Installation, Testing and Commissioning of Volume Controller for all NS 1 Nos. 3411
the closed areas.
356 70 Supply, Installation, Testing and Commissioning of 6W 3'' dia Recessed NS 1 Nos. 1740
Ceining speakers with following features:- Complete Metal speaker with metal
grill, line matching transformer 100/70V line. Variable wattage tappings of 6 /
3 / 1.5, Effective frequency range 120-17,500Hz (BS6840),
SPL@1m/1W=92dB, 180 deg dispertion, snap on spring mounting, Peak SPL
97dB complete with necessary mounting hardware & accesories.
357 4 Supply, Installation, Testing and Commissioning of 6W 3'' dia wall mountable NS 1 Nos. 2297
speakers with following features:- Complete Metal speaker with metal grill, line
matching transformer 100/70V line. Variable wattage tappings of 6 / 3 / 1.5,
Effective frequency range 120-17,500Hz (BS6840), SPL@1m/1W=92dB, 180
deg dispertion, snap on spring mounting, Peak SPL 97dB complete with
necessary mounting hardware & accesories.
358 600 Supply & fixing of LAN Cable cat - 6 UTP cable. ASR-ELEC- 1 RM 25.8
7.1.3
359 600 Supplyinging and fixing of following sizes of steel conduit along with DSR- 1 Metre 147
accessories in surface/recess including painting in case of surface conduit, or 1.20.2
cutting the wall and making good the same in case of recessed conduit as
required 25 mm
360 1 Supply, Installation, Testing and Commissioning of 8 Passanger Elevator, Machine room
NS less in1lift shaft
Nos.of dimensions
22597501900mm x2875mm (W x D), 54
1.Type of machine Gearless,MRL
2.Capacity 540kg
3.Speed 1 mps.
4.No of landing 5 Lnadings( G+3)
5.Number of openings 5 on the same side.
6.Travel approx 15.9 meter
7.Power Supplying 415v/240v, 50HZ
8.Acceptable voltage Fluctuation +10 to -20%
9.Rate of Accelaration / 0.6-1.5 (adjustable at site) decelration (m/sec.sq)
10.Jerk (m/sec.sq) 0.7-1.5 (adjustable at site)

11.Vibration in car horizontal 20/18 MG maximum
vertical 20/18MG maximum
12.Noise level in car 48dbA max.
13.Noise level in machine room 62dbA max.
at 1m from machine
14. Door noise level while closing and 52dbA max.
opening at a distance of 1mtr. from
car door and 1.5 mtr. from floor level.
361 1 Supply, delivery, erection, testing and commissioning of a Three panel indoor NS 1 set 1671024
duty totally enclosed sheet steel clad floor mounting, vermin proof, fully
interlocked vertical isolation, extensible, horizontal draw out, air insulated,
metal clad switchboard having double isolation features complete with circuits
as detailed below. The switchboard would be complete with necessary PVC
insulated copper busbars, small wiring, labels, cable eyes, cable termination to
receive XLPE cables, foundation bolts and suitable for operation on 11 kV 3
phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA.
All Incoming and outgoing feeders shall have fault trip auxiliary contacts for
wiring to annunciation fault trip indication panel.
11 KV HT Switchboard -Indoor duty-(IP-52)
1 Incomming with 2 outgoing panel rquipt with following items.
1- Air insulated metal clad housing
1- set of 3 phase PVC insulated copper busbars 630 amps.
6- Single pole cluster type isolating contacts; i.e. plug and switches.
1- Triple pole EDO drawout truck mounted 11 kV 350 MVA, 630 amps
Vacuum circuit breaker fitted with arc control devices.
1- Trip free 230 V AC, motor charged spring release closing mechanism
complete with necessary auxiliary switches emergency hand trip device and
mechanical 'OFF' and 'ON' indicator.
6 NO/NC contacts for remote ON/OFF/TRIP status
1 - 24 volts DC shunt trip coil
3 - Dual Core Cast resin Current transformers of ratio 50/5 Class 5P10 and
Class 1.0, 15 VA burden for protection & metering.
1- Strip heater with thermostat to prevent absorption of moisture
1- 3 Phase cast resin horizontal draw out line potential transformer ratio
11000/√3 :110/√3 volts, connected star/star with H.V. and L.V. connections,
H.V. and L.V. fuses, isolating plugs for H.V. and L.V. connection.
The instrument and relay panel fitted with
1- Square voltmeter of 96 x 96 mm scaled 0-12000 volt with 3 way and OFF
selector switch.
1- Square Ammeter of 96 x 96 mm scaled 0-50 amps with 3 way and OFF
selector switch.
1 no. energy analyser to measure voltage, current, power factor, frequency,
kW/kVA, kWh, kVArh, kVAh,Real time,date with communication module.
1- Triple pole numerical I.D.M.T. over current, short circuit and earth fault
relay, with two outer elements connected for over current and the middle
element for earth fault protection, over current setting 50% - 200%, Earth fault
setting 20% -80% and with instantaneous element on all 3 pole settings 500-
2000% on over current and 200-800% on earth fault (51, 50, 51N & 50N)
1 - Electro mechanical Master trip relay (86)
1 - Electro mechanical Anti pumping relay (94)
1 - Trip Circuit supervision relay.
1- set Electro mechanical auxiliary relay for transformer fault ALARM for
winding temperature conditions (63x)
1 - no. circuit breaker control switch for electrical (T/N/C)
1 - push button on front door for emergency trip
1- set of Red/Green indicating lamps for close and open position
1- Amber indicating lamp for auto trip
1- clear indicating lamp for trip circuit healthy
1- set of white indicating lamps one per phase
1 - blue indicating lamp for spring charged
1- cable termination suitable for Raychem make cable joint to receive 11 KV
XLPE cable 3 core 240 sqmmThe switchboard shall be complete with all
interconnections, label wiring, etc as required and as per direction
Outgoing:- Each Outgoing feeder consist with the following

1- Air insulated metal clad housing
1- set of 3 phase PVC insulated copper busbars 630 amps
6- Single pole cluster type isolating contacts; i.e. plug and switches.
1- Triple pole EDO drawout truck mounted 11 kV 350 MVA, 630 amps
Vacuum circuit breaker fitted with arc control devices.
1- Trip free 230 V AC, motor charged spring release closing mechanism
complete with necessary auxiliary switches emergency hand trip device and
mechanical 'OFF' and 'ON' indicator.
6 NO/NC contacts for remote ON/OFF/TRIP status
3 - Dual Core Cast resin Current transformers of ratio 25/5 Class 5P10 and
Class 1.0, 15 VA burden for protection & metering.
1- Strip heater with thermostat to prevent absorption of moisture.
The instrument and relay panel fitted with
1- Square voltmeter of 96 x 96 mm scaled 0-12000 volt with 3 way and OFF
selector switch.
1- Square Ammeter of 96 x 96 mm scaled 0-25 amps with 3 way and OFF
selector switch.
1 no. energy analyser to measure voltage, current, power factor, frequency,
kW/kVA, kWh, kVArh, kVAh,Real time,date with communication module.
1- Triple pole numerical I.D.M.T. over current and earth fault relay, with two
outer elements connected for over current and the middle element for earth
fault protection, over current setting 50% - 200%, Earth fault setting 20%
-80% and with instantaneous element on all 3 pole settings 500-2000% on
over current and 200-800% on earth fault (51, 50, 51N & 50N).1 - Electro
mechanical Master trip relay (86), 1 - Electro mechanical Anti pumping relay
(94), 1 - Trip Circuit supervision relay, 1 - set of electro mechanical auxiliary
relay for OLTC, 1- set Electro mechanical auxiliary relay for transformer fault
ALARM for winding temperature conditions (63x) 1 - no. circuit breaker control
switch for electrical (T/N/C), 1- set of Red/Green indicating lamps for close
and open position 1- Amber indicating lamp for auto trip 1- clear indicating
lamp for trip circuit healthy, 1- set of white indicating lamps one per phase 1 -
blue indicating lamp for spring charged 1- cable termination suitable for
Raychem make cable joint to receive 11 KV XLPE cable 3 core 240 sqmm The
switchboard shall be complete with all interconnections, label wiring, etc as
required and as per direction,
11 KV Three panel VCB Switchboard as described above
362 2 Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24VNS DC Batteries
1 charger
Set with semiconductor/IGBT
60157 fullwave rectifier
Note:-
All Meters shall be Digital type
Potential free contact to be provided for HT trouble in each breaker to be used for annunciation in the control room.
The potential free contacts for transformer troubles annunciation & trips for WTI should be provided for remote annunciation in the control room. Req
363 2 Supply, installation, testing and commissioning of 400 kVA, 11000/433 volts NS 1 Set 1073865
Deta/Star, vector group Dyn11, indoor mounting, Dry Type, Air Natural
transformer with OFF Load Tap Changers, suitable for incoming voltage
variation of +5% to –5% . The transformer shall be provided with fittings,
accessories, protection etc. winding temperature indicator, alarm/trip
protection in LV chamber complete as per specifications and as required. The
transformer shall be provided with arrangement to terminate XLPE cable on HT
side and to connect Aluminium cable on LT side, complete as required. The
losses of the Transformer should be as per latest ECBC guideline. Total 11/.
433 KV Transformer
364 3 Supply, installation, testing & commissioning of 125 KVA continuous rating, NS 1 Set 1034819
silent type (Prime Rating) radiator cooled diesel generating set alongwith
complete fuel oil piping, antivibration mounts, base frame, required hardware,
Batteries, Engine control panel with accessories, residential silencer, flexible
connection, bellow / expansion joints etc.complete with all associated
equipment / work as per specifications or requirements as per site.
DG set shall be supplied with built in acoustic enclosure as per pollution
control board norms and as per specification complete in all respect.The DG
Set shall be complete with PCC (Power Command Control) or equivalent DG
Controller module suitable for AMF (auto-mains failure), Auto Load Sharing &
Interface with PLC mounted in the LT panel for ACB/MCCB switching and
Auto load sensing and Auto load Management, including communication card
and networking gateway and software as required. Note: Item rate shall be
include 1st time filling of Lube oil & diesel and also include the cable
termination box suitable for termination of 4 Runs 3.5 C X 300 Sqmm. XLPE
AL cables at alternator.
1031 3 Supply, installation, testing & commissioning of 990 litres capacity day oil 2.1 1 Set 35000
storage tank fabricated from 6 mm thick MS plates. Tank shall include 450
mm ID manhole cover, level indicator with duly calibrated scale and flanged
connection for inlet, outlet, overflow drain and probe provision for level
controller & breather.
1032 1 The contractor shall consider the following details in their item rates, wherever NS 1 Set 2050683
required:
Supporting rigid steel framework.
Cubicle type, 14 gauge CRCA sheet steel enclouser.
Complete with interconnections and distribution bus bars.
Proper bonding to earth.Painting/lettering on Breakers and distribution
boards
The location they serve, providing on each panel its circuit diagram
Providing cable clamps / supports within distribution boards cable alley.
TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size
of neutral link.
All MCB’s shall be of minimum 10 KA breaking capacity.
All motor feeders MCCBs shall be of motor duty.
Distribution panels shall be Powder Coated with Siemens gray paint shade no.
RAL-7032 of IS-5.
Degree of protection for following type of distribution panel enclosure shall be
as per IS:13947-1993.
IP 42 for indoor panels.
IP 54 for kitchen and laundry panels.
IP 55 for outdoor panels
All MCCB’s shall be provided with operating mechanism for door interlock.
Current density of aluminium shall be 1 sq mm for 1.0 amps for rated current
of bus bars and current density of copper shall be 1 sq.mm for 1.25 amps for
rated current of bus bars.
Tinned copper earth bus shall be provided through out the length of each
board.
All measuring instruments (Meters) shall be of digital electronic with LED of
approved make and compatible with BAS.
All hinged door shall be earthed through 4.0 sq mm tinned braided copper
wire.
All panels shall have provision of the following:
Pad locking of Switch board doors.
Pad locking of MCCB’s handles in “OFF” Position.
Additional set of C.T.s, potential free contacts, connectors, contactors with
wiring etc are to be provided for BAS including space required for various
transducers in Main Switch Board sections. Only transducers shall be
supplied by BAS contractor.
All MCB’s used for protection of resistive and lightly inductive load shall be
type “B” characteristic and inductive (motor) load shall be of type “C”
characteristic and discharge lamps and UPS etc. shall be of type D
characteristic.
All incoming and outgoing air circuit breakers shall be placed on middle
portion of the vertical in single tier formation.
All PTs / control transformer shall be provided with centre tap earth
secondary.
All DOL & Star-Delta Starters shall be provided with SPPR (single phase
preventor relay) and 2 nos. of Aux.Contacts for Remote operation/monitor.
The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers
wherever more than two nos. of cables are terminated in the breakers.
Readymade 16 SWG Sheet steel Enclosure with cutout For MCBs
The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s
shall be with thermal magnetic releases upto 250 amps and miroprocessor
based above 250 amps capacity, unless specified otherwise.
Protection Releases Microprocessor based (PRMB) & Thermal magnetic (PRTM)
shall be as described below .
Protection Release Microprocessor Based (PRMB-1)

Over-current/long time protection range 40% - 100 % with Time setting
short circuit /short time protection range 100% - 1000 % with Time setting
Instantaneous short circuit Protection range 150% - 1200 % with Time setting
Earth Fault Protection range 20% - 100 % with Time setting
Under voltage & over voltage protection
Reverse power
Current unbalance
Phase sequence
Measurements
Voltage
Current
Power (Active,Reactive & Apparent)
Energy ((Active,Reactive & Apparent)
Power factor
Frequency
short circuit /short time protection range 100% - 1000 % with Time setting
Earth Fault Protection range 20% - 100 % with Time setting
Measurements
Current

Protection Release Thermal-Magnetic Based (PRTM)

Over-current
Short circuit
Design, fabrication, assembly, wiring and supply of front operated dead front
cubicle type compartmentalised as per Form 3B, rear access free standing,
dust and vermin proof (IP 42 ingress protection) main switchboards suitable for
use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical
fault level of 25 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets
with hinged, gasketted (metal based neoprene) and lockable doors having
structural reinforcement with suitable angle/channel/T/flat sections including
3 mm thick gland plates on top and bottom and including lifting hooks and
including GI earth strip of required size with 2 nos earthing terminals and
including powder coated paint finish of approved shade over metal surface
cleaned and treated with seven tank process complete with interconnections
etc as per specifications, as required and as below.
(Note:The contractor may select the next higher fault rating of MCCB if it is not
readily available ,without any extra cost ,as the figure indicated within the
bracket are required maximum fault level of the panel).
MAIN LT Panel
INCOMER FROM TRANSFORMER From 400 KVA Transformer
2 Nos. 800A 4 pole microprocessor based EDO, ACB(50kA) with integral
protection as per PRMB-1 mentioned in Premable,
1 set of 800/5A, 15 VA, class-1 CTs for APFC relay
1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-800A) Ammeter with ASS with 3 nos. 800/5A CT's
1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating
lamps.
240 V AC Motor wound spring closing mechanism
6 nos NO/NC contacts for remote opening & closing
Terminals to receive XLPE insulated Aluminium cables
Class – B transient voltage surge suppression devices suitable for 3 phases as
per specification.
INCOMER FROM DG SYNCHRONISATION PANEL
2 Nos. 300A 4 pole microprocessor based MCCB(25kA) with integral protection
as per PRMB-2 mentioned in Premable
2 Nos. 300A 4 pole Contactors for E/M interlocking.
Each I/C consist with
1 Set- of ON/OFF/Trip & Trip circuit healthy indicating lamps.
per specification.
BUS BARS
Electrolytic high conductivity Aluminium three phase and neutral busbars with
earthing rated at 1000 amps having a maximum current density of 1 amp per
sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The
neutral busbar is to be of 50% capacity.
BUS COUPLER:-
1 No. 800A FP EDO ACB(50kA) with all required accessories.
1 Set of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required.
OUTGOINGS-Bus Section-1
3 Nos. 300A TP+NL MCCB (25 KA)
1 No. 250A TP+NL MCCB (25 KA)
OUTGOINGS-Bus Section-2
Micro PLC for Electrimechanical interlocking between Transformer I/C, DG I/C & Bus Coupler, The Switchboard with Logic control panel shall be com
Main LT Panel as described above
The outgoing feeders as indicated in SLD shall have suitable range of

followings (except capacitor feeders)
Three phase indicating lamps protected by 2 amps SP MCBs.
All ACB's shall be suitable for minimum 25 kA ( Icu=Ics=Icw for 1 sec.)
415/110V suitable rating control transformer and shall be provided for aux.
control supply.
Wiring with space heater, thermostat and control MCB's shall be provided for
all vertical sections of main LT panel.
All breakers shall be interlocked as per schematic diagram through Mini PLC
with Auto load management and Amf operation control (without display)
All incoming as well as outgoing feeders shall have pad locking facility.
Suitable danger board shall be provided.
Incase of Fire, Fire pumps along with other ventilations and pressurization
fans designed shall become operational. Interlocking with LT panel shall be
carried out accordingly.
DG Synchronisation Panel
INCOMER FROM DG Set
From 125 KVA DG Set
3 Nos. 250A 4 pole microprocessor based MCCB(25kA) with integral protection
as per PRMB-2 mentioned in Premable
3 Nos. 250A 4 pole Contactors for E/M interlocking.
Each I/C consist with
1 Set- of ON/OFF/Trip & Trip circuit healthy indicating lamps.
per specification.
1033 1 BUS BARS NS 1 Set 630078
Electrolytic high conductivity Aluminium three phase and neutral busbars with
earthing rated at 600 amps having a maximum current density of 1 amp per sq
mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The
neutral busbar is to be of 50% capacity.
OUTGOINGS
PLC FEEDER- AUTO ON/OFF AND AUTO LOAD MANAGEMENT & DG
SYNCHRONISATION : Hardware using PLCs for Monitoring of all Electrical
Software and for operations,synchronisation, controlling and interlocking
Parameters of 3 Nos. DG sets with Window based software & Engineering &
Software Development. Required Aux. Relays, Push Buttons & Indication
lamps, 1KVA UPS for Black start & maintenance free Batteries, Power
monitors, Programmable Logic controller, Annunciator and status Fascia,
MIMIC with LED circuit etc as required completing the system.(As per SLD).
The Switchboard with Logic control panel shall be complete with all
interconnections, risers, internal wiring, labels, control/circuit fuses etc.
DG Synchronisation Panel as described above
1034 2 Capacitor Panel (150 kVAR) NS 1 Set 250174

INCOMER
1 No. 300A TPN MCCB (25 KA) as per PRMB-3 as mentioned in Preamble.
METERING & INDICATION
1 set of phase indicating lamps
1 No. 8 step-Microprocessor APFC controller/Relay(Dual source purpose) shall
continuously monitoring all three phases and LCD displays for various
Electrical Parameters like voltage, input current, capacitive current, KVA
demand, KW, Power Factor, self diagnostic error code indication with printout
facility of the above with RS 232/RS 485 port. Controller should mounted on
the front side of the panel. Capacitor bank having 3 phase MPP based mix
dieelectric low loss ISI marked power capacitor and provided with Electronic
Thirstier based switching to suppress switching of inrush current and reducing
harmonics capacitor life.
BUS-BAR
1 Set of 400A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 No.of 125A TP MCCB (25 KA) each with
1 No. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor
with thyristor module suitable capacity to carry expected current continuosly.
3 Nos.of 80A TP MCCB (25 KA) each with
3 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor
2 Nos. of 32A TP MCCB (25 KA) each with
2 Nos. 10 KVAR capacitor Bank each with 7% harmonic & discharge resistor
1 No. of 25A TP MCCB (25 KA) each with
1No. 5 KVAR capacitor Bank each with 7% harmonic & discharge resistor with
thyristor module suitable capacity to carry expected current continuosly.
Capacitor Panel (150 kVAR) as described above
Note:The capacitor panel shall also stipulate the following

(i) All the capacitors shall be suitable for 525 V
(ii) Necessary control and firing card with proper wiring and lugs of the
required rating to be provided.
(iii) Heavy duty exhaust fans to be provided for cooling Thyristors.
(iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging
or leading.
(v) The APFC shall be protected from following
* over-voltage & voltage unbalance
* Over temperature-system should be in standby mode and automatically
restart after above condition restored.
* Total Harmonic Distortion
1035 1 FRONT OPERATED PANEL NS 1 Set 102326
Design, manufacture, supplying fixing in position of the following front
operated cubicle type,compartmentalised with front access, dead back, 2mm
thick steel enclosed free standing, dust and vermin proof, switchboard with
IP42 protection with hinged and lockable doors complete with
interconnections, tinned copper crimping lugs, bonding to earth and painting,
suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a
fault level of 25 KA symmetrical at 415 volts.
All switchboards shall be modular type and have provision for entry of cables
from the top /bottom as required.
The cost shall include providing and fixing of 100 x 50 x 6 mm channels for
switchboard support.
All live accessible parts shall be shrouded and all equipment shall be finger
touch proof. The Busbars insulation shall be with heat shrinkable sleeves.
SMC/DMC shrouds and busbar supports shall be used.
All MCCB shall have phase barriers, rotary handles and extension terminal as
required .
All unbalanced kWH meter shall have communication module for BMS
connectivity
MDB- 1 (Terminal Block)

INCOMER
1 No. 300 amps 4P MCCB(25 KA) with protection release (PRMB-2) with Class-
C transient voltage surge suppression device suitable for 3 phases as per
specifications.

1 set of R,Y,B phase indicating lamps
1 No. Digital Electronic KWH meter(Dual Source).
BUS-BAR
OUTGOINGS
5 Nos. 63A 4P MCB (10 KA)
MDB- 1 (Terminal Block) as described above
1036 1 SDB- 1.1 (UPS Panel- Terminal Block) NS 1 Set 108270
INCOMER
2 Nos. 63 amps 4P MCCB(25 KA) with thermal Magnetic release (PRMB-3) with
Class-C transient voltage surge suppression device suitable for 3 phases as per
specifications.
2 Nos. 63 amps 4P Contactor for E/M interlocking.

BUS-BAR
BUS COUPLER
1 No. 63 amps 4P MCCB(25 KA) with thermal Magnetic release (PRMB-3)
1 Nos. 63 amps 4P Contactor for E/M interlocking.
OUTGOINGS
SDB- 1.1 (UPS Panel- Terminal Block) as described above
1037 1 1 No. 200 amps 4P MCCB(25 KA) with protection release (PRMB-2) with Class- NS 1 Set 82267
specifications.
BUS-BAR
OUTGOINGS
MDB- 2 (ATC Block) as described above
1038 1 MDB - 3 (Pump Room Panel) INCOMER 1No. 100A FP MCCB (25 KA) with NS 1 Set 224913
thermal Magnetic release (PRTM) with Class-C transient voltage surge
suppression device suitable for 3 phases as per specifications.
BUS-BAR
OUTGOING
3 Nos. 9-13A (50KA) TP MPCB .
4 Nos.1.6-2.5A (50KA) TP MPCB .
3 No.2.5-4A (50KA) TP MPCB .
1 No. 32A TPN MCB(10KA.
The Switchboard shall be complete with all interconnections, risers, internal
wiring, labels etc complete as required.
Fully automatic DOL starters (for 1 to 5 H.P.motors) with push buttons and
on/off indicating lights with MN type relay, contactors, direct type ammeter
(1.6-13A for 1.5 to 5 HP), single phase preventors for all motors, with selector
switch and fuses overload relay as required.
5 HP - 3 No.Starter
1.5 HP -4 Nos.Starter
2 HP -3 Nos.Starter
Spare N.O. - N.C. contacts for each starter - 3Set.
G.I. strip 25 x 3 mm throughout the length of MCC.
All internal wiring with colour coding from incoming mains to various
switchgear, starter, meter, indicating lamp and bus bar.
All starters shall be compatible for remote operation.All Switch gears offered
must be compatible with the H.P. of the motors offered
MDB - 3 (Pump Room Panel) as described above
1039 1 NS 1 Set 278406

MDB - 4 (Fire Pump)
INCOMER
1No. 250A FP MCCB (25 KA) with thermal Magnetic release (PRTM) with Class-
specifications.

BUS-BAR
OUTGOING
3 Nos.160A(15kA) TP MCCB .
1 No. 9-13A (50KA)TPN MPCB .
1 No. 25A TPN MCB(10KA).
The Switchboard shall be complete with all interconnections, risers, internal
wiring, labels etc complete as required.
Fully automatic DOL starters (for 6 H.P. motors) with push buttons and
on/off indicating lights with MN type relay, contactors, direct type ammeter (
9-13A for 6 HP), single phase preventors for all motors, with selector switch
and fuses overload relay as required.
Fully automatic Star Delta starters (for 70 H.P. motors) with push buttons and
on/off indicating lights with MN type relay, contactors, direct type ammeter (
0-160A for 70 HP), single phase preventors for all motors, with selector switch
and fuses overload relay as required.
70 HP -2 Nos.(Main Electrical pump & Main Sprinkler Pump) Starter.
6 HP - 1 No.(Jockey Pumps) Starter
Spare N.O. - N.C. contacts for each starter - 3Set.
G.I. strip 25 x 3 mm throughout the length of MCC.
All internal wiring with colour coding from incoming mains to various
switchgear, starter, meter, indicating lamp and bus bar.
All starters shall be compatible for remote operation.All Switch gears offered
must be compatible with the H.P. of the motors offered
MDB - 4 (Fire Pump) as described above
1040 6 MDB- 5 (External Lighting Feeder Piller) Supply and fixing of suitable feeder ASR-ELEC- 1 Set 30473
piller box made with 14 SWG CRCA sheet including S & F of Legrand / 6.1.29
Schnieder / Siemens / ABB / L&T make 63A TP MCB, 8 Nos SP MCB's, bus
bars, 6 Sqmm 3 core copper cable for invidual light control, contactor, suitable
timer and connectors and provision for energy meter etc., complete for finished
item of work.
1041 1 Main Feeder Piller for Approach Lighting NS 1 Set 62207

Incoming:
One No. 32A,4P MCCB (16kA) and ON/OFF indicating lamps.One from normal
supply & one from solar system.
One (1) No. 32A, 3 phase Timer Switch on each phase for automatic operation.
Metering & Indication:
Combined digital Ammeter/Voltmeter with Selector Switch and 30/5A, CL-1,
10VA CTs and 2A control MCB.
Sets of phase indicating lamp with 2A control MCBs.
Sets of ON/OFF/Trip indicating lamp with 2A control MCBs.
Bus Bar:
Electrolytic high conductivity Aluminium three pole and neutral busbars rated
at 63 amps(after deration) having a maximum current density of 0.8 amp per
sq mm insulated with heat shrinkable PVC sleeves.
Outgoing:
Eight(8) nos 6 Amp DP MCB, 10 KA.
Main Feeder Piller for Approach Lighting described as above
1042 1 Main Feeder Piller for Periferal Lighting NS 1 Set 62207
Incoming:
One No. 32A,4P MCCB (16kA) and ON/OFF indicating lamps.One from normal
supply & one from solar system.
One (1) No. 32A, 3 phase Timer Switch on each phase for automatic operation.
Metering & Indication:
Combined digital Ammeter/Voltmeter with Selector Switch and 30/5A, CL-1,
10VA CTs and 2A control MCB.
Sets of phase indicating lamp with 2A control MCBs.
Sets of ON/OFF/Trip indicating lamp with 2A control MCBs.
Bus Bar: Electrolytic high conductivity Aluminium three pole and neutral
busbars rated at 63 amps(after deration) having a maximum current density of
0.8 amp per sq mm insulated with heat shrinkable PVC sleeves.
Main Feeder Piller for Periferal Lighting described as above
1043 40 NS 1 Set 38433
Sub Feeder Piller for Approach & Periferal Lighting
Incoming:
Supply, installation, testing and commissioning of cubicle type feeder pillar
(out -door type) suitable for 440 Volts 3 phase 4 wire 50 Hz AC Supply system
fabricated in design from CRCA sheet steel 2 mm thick for frame work and
covers 3 mm thick for gland plates i/c cleaning & finishing complete with 7
tank process for powder coating in approved shade having 63 Amps insulated
bus bar with shrounds aluminium alloy bus bars, bottom base channel of MS
section not less than 100 mm x 50mmx5 mm thick complete with earth stud
the control wiring shall be with 2.5 sq. mm PVCinsulated copper conductor s/c
cable complete with cable alloys, cable gland plates in two half i/c providing
following switch gears. (Sub Feeder Pillar for Approach Light - 4 No.; Main
Feeder Pillar for Peripheral Lights - 1 No.; Sub Feeder Pillar for Peripheral
Lights - 4 No.)
Incomer
6 Amp 4P MCB -10KA 1 no.
Outgoing
6 Amps DP MCB 10KA- 4 nos.
Sub Feeder Piller for Approach & Periferal Lighting
1044 37 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, DSR-5.2 1 Set 3672
and providing masonry enclosure with cover plate having locking arrangement
and watering pipe etc. with charcoal/ coke and salt as required.
1045 18 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including DSR-5.4 1 Set 4327
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and
salt as required.
1046 10 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including DSR-5.6 1 Set 8289
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and
salt as required.
1047 27000 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for DSR-5.7 1 Metre 28
conductor earth electrode, including connection/ termination with GI thimble
etc. as required.
1048 1500 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe DSR-5.1 1 Metre 872
FRLSom earth electrode including connection with brass nut, bolt, spring,
washer excavation and re-filling etc. as required.
1049 7400 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from DSR-5.11 1 Metre 351
earth electrode including connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required.
1050 100 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. DSR-5.12 1 Metre 134
Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I.
thimble excavation and re-filling as required.
1051 50 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for DSR-5.14 1 Metre 698
connections etc. as required.
1052 50 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for DSR-5.15 1 Metre 129
connections etc. as required.
1053 100 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop DSR-5.16 1 Metre 37
1054 18605 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of DSR-7.1.1 1 Metre 206
1.1 KV grade of following size direct in ground including excavation, sand
cushioning, protective covering and refilling the trench etc as required. Upto 35
sq. mm
cushioning, protective covering and refilling the trench etc as required. Above
35 sq. mm and upto 95 sq. mm
1058 4567.9375 Laying of one number additional PVC insulated & PVC sheathed /XLPE power DSR - 1 Metre 141
cable of 1.1 KV grade of following size direct in ground in the same trench in 7.2.1
one tier horizontal formation including excavation, sand cushioning, protective
covering & refilling the trench etc. as required. Upto 35 sqmm
1059 1435.6375 Laying of one number additional PVC insulated & PVC sheathed /XLPE power DSR- 7.2.2 1 Metre 149
cable of 1.1 KV grade of following size direct in ground in the same trench in
covering & refilling the trench etc. as required. Above 35 sqmm and upto 95
sqmm
1060 522.05 Laying of one number additional PVC insulated & PVC sheathed /XLPE power DSR- 7.2.3 1 Meter 158
cable of 1.1 KV grade of following size direct in ground in the same trench in
covering & refilling the trench etc. as required. Above 95 sqmm and upto 185
sqmm
1061 350 Laying of one number PVC insulated & PVC sheathed /XLPE power cable of DSR - 1 Meter 18
1.1 KV grade of following size in the existing RCC Hume / Stoneware / Metal 7.5.1
pipe as required. Upto 35 sqmm
1062 110 Laying of one number PVC insulated & PVC sheathed /XLPE power cable of DSR- 7.5.2 1 Meter 28
1.1 KV grade of following size in the existing RCC Hume / Stoneware / Metal
pipe as required. Above 35 sqmm and upto 95 sqmm
1063 40 Laying of one number PVC insulated & PVC sheathed /XLPE power cable of DSR- 7.5.3 1 Meter 37
1.1 KV grade of following size in the existing RCC Hume / Stoneware / Metal
pipe as required. Above 95 sqmm and upto 185 sqmm
1.1 KV grade of following the existing masonary open duct as required. Upto 7.6.1
35 sqmm
1.1 KV grade of following the existing masonary open duct as required. Above 7.6.2
35 sqmm and upto 95 sqmm
1.1 KV grade of size upto 35 Sqmm on cable tray as required. 7.8.1
1067 20 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G. DSR-7.10 1 Each 269
I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm
angle iron, 60 cm long and fixing the same in ground as required.
1068 300 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of DSR-8.3.2 1 Meter 65
11 kV grade of following size in the existing RCC/ HUME/ METAL pipe as
required. Above 120 sq. mm and upto 400 sq. mm
1069 20 Supply of 4 Sqmm 2 Core XLPE insulated, 1100V grade armoured alluminium ASR-ELEC- 1 1RM 92
cable as per specification confirming to IS:7098 (Part - I). 4.1.1
cable as per specification confirming to IS:7098 (Part - I). 4.1.4
cable as per specification confirming to IS:7098 (Part - I) 4.1.10
1072 2300 Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured ASR-ELEC- 1 1 RM 162
alluminium cable as per specification confirming to IS:7098 (Part - I) 4.1.16
1073 2684 Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured ASR-ELEC- 1 1 RM 207
alluminium cable as per specification confirming to IS:7098 (Part - I). 4.1.36
1081 900 Supply of 3 Core 11 KV 185 Sqmm HT XLPE (E) armoured Cable, as per IS ASR-ELEC- 1 1 RM 1475
specification confirming to IS 7098/II/85 with latest ammendments. 4.1.54
1082 12 Supply and Fixing of Single compression brass cable glands for 3.5 core XLPE ASR-ELEC- 1 Nos. 327
armoured cable for 185Sqmm with brass washers complete. 4.2.1
1085 1182 Supply and Fixing of single compression brass cable glands for 4 core XLPE ASR-ELEC- 1 Nos. 94
armoured cable up to 16.0 Sq.mm with brass washers complete. 4.2.5
1086 30 Supply and Fixing of single compression brass cable glands for 3.5 core XLPE ASR-ELEC- 1 Nos. 138
armoured cable from 25 Sqmm to 50.0 Sq.mm with brass washers complete. 4.2.6
armoured cable from 70 Sqmm to 150.0 Sq.mm with brass washers complete. 4.2.7
1088 1178 Supply and fixing of crimping type aluminium lugs confirming to I.S ASR-ELEC- 1 Nos. 60
specifications for cable upto 16 Sq.mm including nuts and bolts with 4.3.13
connections.
specifications for cable of 25 Sq.mm including nuts and bolts with connections. 4.3.14
specifications for cable of 120 Sq.mm including nuts and bolts with 4.3.19
connections.
connections.
connections.
connections.
connections.
1097 6 Supplying and making outdoor cable end termination with heat shrinkable NS 1 Each 10769
jointing kit complete with all accessories including lugs suitable for following
size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.
185 sq. mm
1098 2 Supply and transportation of 30W LED Street light Luminaire made of NS 1 Each 11626
pressure diecast alluminium body with powder coated, having protective
toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's having efficacy >120 lumines/watt, System efficacy >95lm/W and
junction temprature < 70°C, with Ingrees protection IP65, Driver surge
protection 4KV, external Surge protection ≥ 5KV with optics distribution Type II
medium, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K -
5700K, minimum CRI>70, etc., complete
1099 394 Supply and transportation of 30W LED Street light Luminaire made of ASR-ELEC- 1 Each 9370
pressure diecast alluminium body with powder coated, having protective 3.9.32
1100 51 Supply and transportation of 60W LED Street light Luminaire made of ASR-ELEC- 1 Each 13000
pressure diecast alluminium body with powder coated, having protective 3.9.33
1101 10 Supply and transportation of 90 LED Flood light Luminaire made of pressure ASR-ELEC- 1 Each 21500
diecast alluminium housing with powder coated,having protective toughned 3.9.47
glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's
having efficacy >120 lumines/watt, System efficacy >95lm/W and junction
temprature < 70°C, with Ingrees protection IP65, IK05, Driver surge protection
4KV, external Surge protection ≥ 5KV with wide/ Narrow beam optics,
THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,
minimum CRI>70, etc.,
1102 140 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole ASR-ELEC- 1 Each 15329
with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate 6.1.8
with door opening arrangement, including the supply of suitable boards with
bakelite sheet as per IS specification suitable to withstand the wind speed of
180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155 mm,. Top
70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750
long 'J' bolts along with template.
1103 420 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole NS 1 Each 8371
with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate
with door opening arrangement, including the supply of suitable boards with
bakelite sheet as per IS specification suitable to withstand the wind speed of
180 KMPH for 4 Mtrs height Pole with all required nut bolts etc.
1104 510 Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket ASR-ELEC- 1 Each 1604
made with MS galvanized 40mm / 50mm dia Pipe. 6.1.15
1105 471 Foundation and erection charges for 9 mtrs / 10 Mtrs long Octagonal/Conical ASR-ELEC- 1 Each 4950
pole duly erecting on base plate 290mm x 290mm x 16mm thick duly 6.1.21
providing 4 Nos. foundation bolts with nuts with providing of M20 c.c work
vibrated concreting mixing with necessary steel (15kgs) reinforcement as
directed by the field engineers during execution including all labour charges
and cost and conveyance of materials etc. complete.
1106 3 Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with ASR-ELEC- 1 Each 103354
single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN 6.1.22
- 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a
base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in
single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot
dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3
including head frame, 2 point suspension system with steel rope 6mm dia
(7/19) construction double drum winch / power tool operating speed of 900
RPM, and necessary cable trailer connections and single speed motor with M
24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires
with GLS type aviation twin lamp.
1107 3 Earth work exacavation with a approximate quantity of 4.0 Cum for errection ASR-ELEC- 1 Each 35794
of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 6.1.31
1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm
/ 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and
conveyance of all above materials including labour charges for errection of High
Mast and Carraige etc complete.
1108 1 Supply, Installation, testing & Commissioning of solar module, necessary 0 1 Set 2606175
electrical cables to connect solar cells together and to the DB's as well as
inverters to have a complete operational circuit, Conduits, cable trays,
trucking, earthing system and complete Main Junction Box according to the
drawings and engineer's instruction and approval. Price will include all
materials needed to connect from modules to inverter and have complete job
ready for installing high quality PV modules connected. Price shall include
costs of repairing any damaged works.
Supply, Installation, testing & Commissioning of Module mounting Structure

according to the detailed drawing and approval by the Engineer. Contractor
should submit shop drawing for proper mounting structure. Rate shall include
aluminium anodized/ HD galvanized structure, supports, plates & screws,
bracing and angles for dividers etc to complete the structure. Rate shall
include excavation, concreting and fixing of structure.
Supply, Installation, testing & Commissioning of 30kW 1P grid tie inverter with
minimum 2 MPPT inputs. The inverter depending on the system design and
installation proposed. The inverter unit shall be suitable for indoor and
outdoor installations. Cable terminations to inverter shall be of type DC plug
and socket connectors. Technical literature has to be provided as generated by
the inverters manufacturer software. Inverter shall allow an adjustable power
factor outdoor, minimum AC output power 30 kw, with all necessary electrical
cables, Conduits and trays and all other materials and workmanship needed to
connect with the main distribution panel according according to the drawings
and engineer's instruction and approval and have a complete job ready.
Supply, install, connect and operate 20KA DC SPD DC surge protector for grid
connected system . The Surge protector unit shall be suitable for indoor and
outdoor installations. The surcharge protector system shall include all
necessary electrical cables, Conduits and trays and all other materials and
workmanship needed to the system according to the drawings and engineer's
instruction and approval and have a complete job ready.
1109 250 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated Mtr. 366
copper conductor single core cable in surface/ recessed steel conduit
alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor
single core cable for
loop earthing as required.
1110 1000 Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured Rm 550
alluminium cable as per specification
confirming to IS:7098 (Part - I).
1111 441.45 B). SUB ESTIMATE FOR UG WATER TANK & PUMP ROOM Plain
Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
foundations and under flooring bed using coarse aggregate 40mm size
hard, machine crushed granite from approved quarry including cost and
conveyance of all materials like cement, sand, coarse aggregate, water
etc. to site, including sales & other taxes on all materials and including
all charges for machine mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)
Qty Vide Page No 2 of MB No 27/A

Entrance steps
4.01 Pump room Cum ( 3,459.00)
#REF! 210.02 Plastering 12mm thick single coat in CM(1:5) using screened sand including APSS 1 Sqm ( 114.00)
cost and conveyance of all materials like cement, sand, water etc., to site,
including sales & other taxes on all materials, and all operational, incidental
charges on materials and including cost of all labour charges for mixing
mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads
& contractors profit complete for finished item of work.(SS 901,903 & 904) -
First Storey
#REF! 124.55 Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and
APSS
conveyance
1 of all
Sqmmaterials
( like
166.00)
cement, sand, water etc., to site,
#REF! 120.66 Providing dadooing to walls with glazed full body ceramic tiles of any size and APSS 1 Sqm ( 657.00)
profit complete for finished item of work. - First Storey
#REF! 13.90 Supplying and fixing of stainless steel ( grade 304 ) hand railing as per APSS 1 Sqm ( 4,954.00)
charges , overheads & contractors profit etc., complete for finished item of
work.
#REF! 6.30 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5 APSS 1 Metre ( 274.00)
mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC
Bends, shoes, iron / PVC clamps and all other accessories and fixing in
position including cost and conveyance of all materials, sales & other taxes on
materials to site, operational & incidental charges including all labour charges
for fixing at site etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 1328)
#REF! 160.37 Providing and applying Wall putty of White Cement or Polymer or Cement APSS 1 Sqm ( 197.00)
#REF! 132.58 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture APSS 1 Sqm ( 246.00)
#REF! 160.37 Painting to new walls with 2 coats of Acrylic based Oil bound Washable APSS 1 Sqm ( 92.00)
Distemper having VOC content less than 50 grams/litre over promer coat
using white cemnt as approved by Engineer-In-Charge, making 3 coats in all to
give an even shade after thourughly brushing the surface to remove all dirt and
remains of loose powdered materials, including cost and conveyance of all
materials to work site and all operational, incidental, labour charges etc., and
overheads & contractors profit complete for finished item of work as per APSS
911 for internal walls in all floors.
#REF! 42.52 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 DSR 1 Sqm ( 450.35)
coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick
bed of dry brick ballast 40 mm nominal size, well rammed and consolidated
and grouted with fine sand, including finishing the top smooth.
#REF! 17.72 Brick work with common burnt clay F.P.S. (non modular) bricks of class DSR 1 Cum ( 5,582.85)
designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
#REF! 8.00 Providing and fixing panelling or panelling and glazing in panelled or panelled DSR 1 Sqm ( 1,845.00)
and glazed shutters for doors, windows and clerestory windows (Area of
opening for panel inserts excluding portion inside grooves or rebates to be
measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40
mm thick -:Ply wood 7 ply, 9 mm thick
#REF! 1.00 Providing and fixing aluminium extruded section body tubular type universal DSR 1 Each ( 388.40)
complete.
#REF! 1 Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic DSR 1 Each ( 189.20)
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to
required colour or shade, with nuts and screws etc. complete :250x16 mm
#REF! 2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic DSR 1 Each ( 88.10)
#REF! 8 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating DSR 1 Each ( 51.10)
#REF! 1 Providing and fixing aluminium hanging floor door stopper, ISI marked, DSR 1 Each ( 38.00)
#REF! 5.67 Supplying and fixing rolling shutters of approved make, made of required size DSR 1 Sqm ( 2,316.10)
M.S. laths, interlocked together through their entire length and jointed together
at the end by end locks, mounted on specially designed pipe shaft with
brackets, side guides and arrangements for inside and outside locking with
push and pull operation complete, including the cost of providing and fixing
necessary 27.5 cm long wire springs manufactured from high tensile steel wire
of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of
required thickness for rolling shutters-.80x1.20 mm M.S. laths with 1.20 mm
thick top cover
#REF! 5.67 Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. DSR 1 Sqm ( 313.60)
bar instead of laths as per design approved by Engineer-in- charge, (area of
grill to be measured).
#REF! 61.75 52 mm thick cement concrete flooring with concrete hardener topping, under DSR 1 Sqm ( 555.25)
layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) and top layer 12 mm thick cement
hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone
aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre
per 50 kg of cement or as per manufacturer’s specifications. This includes cost
of cement slurry, but excluding the cost of nosing of steps etc. complete.
#REF! 7.80 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed DSR 1 Sqm ( 1,158.10)
with grey cement slurry mixed with pigment to match the shade of the slab,
including rubbing and polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :25 mm thick
#REF! 3.68 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid DSR 1 Sqm ( 1,238.20)
on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and
jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.
#REF! 24.53 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. DSR 1 Metre ( 84.85)
#REF! 11.54 Extra for Kota stone/ sand stone in treads of steps and risers using single DSR 1 Sqm ( 18.95)
length up to 1.05 metre.
#REF! 56.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness DSR 1 Sqm ( 688.35)
pointing the joints with white cement and matching pigment etc, complete.
#REF! 28.28 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : DSR 1 Metre ( 153.00)
4 stone aggregate 10 mm and down gauge), including finishing with cement
mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep
chase
#REF! 2 Making khurras 45x45 cm with average minimum thickness of 5 cm cement DSR 1 Each ( 187.60)
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm
cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet complete.
#REF! 2 Providing and fixing to the inlet mouth of rain water pipe PTMT (an DSR 1 Each ( 66.45)
#REF! 118.20 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) DSR 1 Sqm ( 143.80)
#REF! 30 Providing orange colour safety foot rest of minimum 6 mm thick plastic DSR 1 Each ( 327.90)
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:
1786, having minimum cross section as 23 mmx25 mm and over all minimum
length 263 mm and width as 165 mm with minimum 112 mm space between
protruded legs having 2 mm tread on top surface by ribbing or chequering
besides necessary and adequate anchoring projections on tail length on 138
mm as per standard drawing and suitable to with stand the bend test and
chemical resistance test as per specifications and having manufacture’s
permanent identification mark to be visible even after fixing, including fixing in
manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
#REF! 94.00 Providing and fixing aluminium work for doors, windows, ventilators and DSR 1 Kg ( 384.50)
paid for separately) :For fixed portionPowder coated aluminium (minimum
thickness of powder
coating 50 micron)
#REF! 47.00 For shutters of doors, windows & ventilators including providing and fixing DSR 1 Sqm ( 444.90)
be paid for separately)-Powder coated aluminium (minimum thickness of
powdercoating 50 micron)
#REF! 1.91 Providing and fixing 12 mm thick prelaminated particle board flat pressed DSR 1 Sqm ( 866.60)
architectural drawings and directions of engineer-in-charge.Pre-laminated
#REF! 7.75 Providing and fixing glazing in aluminium door, window, ventilator shutters DSR 1 Sqm ( 1,003.95)
#REF! 34.46 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone DSR 1 Metre ( 62.45)
#REF! 1 Providing and fixing 100mm brass locks (best make of approved quality) for DSR 1 Each ( 359.00)
#REF! 4 Providing and fixing aluminium casement windows fastener of required length DSR 1 Each ( 55.50)
for aluminium windows with necessary screws etc. complete.Powder coated
#REF! 2 Providing and fixing aluminium round shape handle of outer dia 100 mm with DSR 1 Each ( 68.30)
SS screws etc. complete as per direction of Engineerin-chargePowder coated
#REF! 45.70 Providing and laying integral cement based water proofing treatment including DSR 1 Sqm ( 1,034.65)
preparation of surface as required for treatment of roofs, balconies, terraces etc
consisting of following operations: a) Applying a slurry coat of neat cement
using 2.75 kg/sqm of cement admixed with water proofing compound
conforming to IS. 2645 and approved by Engineer- n-charge over the RCC slab
including adjoining walls upto 300mm height including cleaning the surface
before treatment. b) Laying brick bats with mortar using broken bricks/brick
bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5
coarse sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge over 20 mm thick layer of cement mortar
of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the adjoining walls upto 300 mm height including
rounding of junctions of walls and slabs c) After two days of proper curing
applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed
jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and approved by Engineer-
in-charge including laying glass fibre cloth of approved quality in top layer of
plaster and finally finishing the surface with trowel with neat cement slurry
and making pattern of 300x300 mm square 3 mm deep. e)The whole terrace so
finished shall be flooded with water for a minimum period of two weeks for
curing and for final test. All above operations to be done in order and as
directed and specified by the Engineerin- Charge :With average thickness of
120 mm and minimum thickness at
khurra as 65 mm.
#REF! 3 Supplying and fixing C.I. cover without frame for manholes :455 x 610 mm rectangular
NS C.I. cover
1 (light
Each
duty) the
( weight
2,000.00)
of the cover to be not less than
#REF! 70.34 C). SUB ESTIMATE FOR SUB-STATION : Flooring with chequered cement concreteAPSS
heavy duty1 tiles confirming
Sqm ( to 699.00)
IS:13801 using aggregates, cement
#REF! 63.59 Providing cladding to walls with High Polished Granite 16 to 18 mm thick up APSS 1 Sqm ( 3,816.00)
to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring
slabs set over base coat of CM(1:5) 12 mm thick using screened sand with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of matching shade to
full depth, including cost of all materials like tiles, cement, sand and water
etc., and overheads & contractors profit complete for finished item of work.
First Storey
#REF! 20.50 Providing dadooing to walls with glazed full body ceramic tiles of any size and APSS 1 Sqm ( 657.00)
#REF! 574.52 Providing and applying Wall putty of White Cement or Polymer or Cement APSS 1 Sqm ( 197.00)
#REF! 275.03 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture APSS 1 Sqm ( 246.00)
#REF! 574.52 Supply & application of one coat water based cement primer of interior grade I APSS 1 Sqm ( 131.00)
#REF! 134.35 Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic APSS 1 Sqm ( 89.00)
#REF! 69.73 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic APSS 1 Sqm ( 136.00)
Compound) content less than 50 grams/litre over primer coat of red oxide to
new iron work including cost and conveyance of all materials to site, sales &
other taxes, incidental, operational and all labour charges etc., and overheads
& contractors profit complete for finished item of work in all floors. (SS No.
1201, 1212 & 1207).
#REF! 53.06 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 DSR 1 Sqm ( 450.35)
#REF! 55.06 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt DSR 1 Metre ( 39.20)
clay F.P.S. (non modular) bricks of class designation 7.5 including grouting
with cement mortar 1:4 (1 cement : 4 fine sand).
#REF! 4.00 Providing and fixing aluminium extruded section body tubular type universal DSR 1 Each ( 388.40)
complete.
#REF! 3 Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic DSR 1 Each ( 212.45)
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to
required colour or shade, with nuts and screws etc. complete :300x16 mm
#REF! 28 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating DSR 1 Each ( 51.10)
#REF! 4 Providing and fixing aluminium hanging floor door stopper, ISI marked, DSR 1 Each ( 38.00)
#REF! 32.40 Supplying and fixing rolling shutters of approved make, made of required size DSR 1 Sqm ( 2,316.10)
M.S. laths, interlocked together through their entire length and jointed together
at the end by end locks, mounted on specially designed pipe shaft with
brackets, side guides and arrangements for inside and outside locking with
push and pull operation complete, including the cost of providing and fixing
necessary 27.5 cm long wire springs manufactured from high tensile steel wire
of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of
required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm
thick top cover
#REF! 37.85 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)DSR
finished with
1 a floating
Sqm coat
( of362.60)
neat cement, including cement slu
#REF! 17.69 Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm DSR 1 Sqm ( 909.70)
thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey
cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with
pigment of matching shade complete.Marble tiles (polished) Raj Nagar 1 8 mm
thick
#REF! 176.85 Marble stone flooring with 18 mm thick marble stone, as per sample of marble DSR 1 Sqm ( 1,589.40)
approved by Engineer-in-charge, over 20 mm (average) thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,
including rubbing and polishing complete with :Udaipur green marble
#REF! 17.80 Providing and laying vitrified floor tiles in different sizes (thickness to be DSR 1 Sqm ( 1,119.40)
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all colours and shades, laid on
20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting
the joints with white cement and matching pigments etc., completeSize of Tile
600x600 mm.
#REF! 2.04 Providing and laying Vitrified tiles in different sizes (thickness to be specified DSR 1 Sqm ( 1,135.20)
by manufacturer), with water absorption less than 0.08 % and conforming to I.
S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,
over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),
including grouting the joint with white cement & matching pigments etc.
complete.Size of Tile 600x600 mm
#REF! 310 Providing and fixing aluminium work for doors, windows, ventilators and DSR 1 Kg ( 384.50)
paid for separately) :For fixed portionPowder coated aluminium (minimum
thickness of powder
coating 50 micron)
#REF! 159 Providing and fixing aluminium work For shutters of doors, windows & DSR 1 Kg ( 444.90)
ventilators including providing and fixing hinges/ pivots and making provision
for fixing of fittings wherever required including the cost of EPDM rubber /
neoprene gasket required (Fittings shall be paid for separately)Powder coated
aluminium (minimum thickness of powder
coating 50 micron)
#REF! 6.81 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layerDSR
or graded1wood Sqm
particle (board866.60)
conforming to IS: 12823 Grade l T
#REF! 115.23 G). SUB ESTIMATE FOR CONSTRUCTION OF AIR TRAFFIC CONTROL APSS 1 Sqm 115.00
(ATC) BUILDING: Plastering 12mm thick single coat in CM(1:5) using
screened sand including cost and conveyance of all materials like cement,
sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour
charges for mixing mortar, finishing, curing as directed by Engineer-in-charge
etc., and overheads & contractors profit complete for finished item of work.(SS
901,903 & 904) First Storey
#REF! 8.55 Providing 16 to 18mm thick high polished granite stone slabs other than black APSS 1 Sqm 5,084.00
and regular colours (i.e. of shades like paradiso / bala flower / copper silk /
laka red / lavender blue) with borders and design as per the pattern approved
by the Engineer-in-Charge of length not less than 2.43 mts set over base coat
of cement mortar (1:5) , 12mm thick using screened sand over CC bed already
laid or RCC roof slab including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement
work site and all operational, incidental labour & lift charges, half rounding the
edges of treads , polishing charges and all other taxes on all materials, cost of
base coat and overheads & contractors profit complete for finished item of work
for treads and risers (S.S.701 & special) for Tread First Storey
for treads and risers (S.S.701 & special) for Tread Second Storey
for treads and risers (S.S.701 & special) for Riser First Storey
for treads and risers (S.S.701 & special) for riser Second Storey
#REF! 61.27 Providing dadooing to walls with glazed full body ceramic tiles of any size and APSS 1 Sqm 657.00
profit complete for finished item of work. Second Storey
#REF! 55.80 Providing dadooing to walls with glazed full body ceramic tiles of any size and APSS 1 sqm 671.00
profit complete for finished item of work Third Storey
#REF! 33.30 Supplying and fixing of stainless steel ( grade 304 ) hand railing as per APSS 1 Sqm 4,954.00
charges , overheads & contractors profit etc. complete for finished item of work.
#REF! 2726.19 Providing and applying Wall putty of White Cement or Polymer or Cement APSS 1 Sqm 197.00
#REF! 1293.17 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture APSS 1 Sqm 246.00
muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and
conveyance of all materials to work site and all operational, incidental, labour
charges, scaffolding charges, overheads and contractors profit etc., complete
for finished item of work in all floors for external walls.
#REF! 1369.87 Supply & application of one coat water based cement primer of interior grade I APSS 1 Sqm 131.00
#REF! 134.82 Supplying and fixing Gyp Board Suspended regular single layer false ceiling APSS 1 Sqm 969.00
for finished item of work.
#REF! 59.54 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 DSR 1 Sqm 450.35
#REF! 76.83 Centering and shuttering including strutting, propping etc. and removal of DSR 1 Sqm 422.30
form for : Suspended floors, roofs, landings, balconies and access platform
#REF! 6.67 Brick work with common burnt clay F.P.S. (non modular) bricks of class DSR 1 cum 5,582.85
designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
#REF! 63.54 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt DSR 1 Metre 39.20
#REF! 8.51 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded DSR 1 Sqm 3,351.95
high gloss finish etc. complete at all levels. Granite of any colour and shade'
#REF! 65.17 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., DSR 1 Sqm 245.70
per design approved by Engineer-in-Charge. Granite work
#REF! 32.50 Extra for fixing marble /granite stone, over and above corresponding basic DSR 1 Sqm 266.25
#REF! 15.00 Extra for providing opening of required size & shape for wash basin/ kitchen DSR 1 Each 427.95
#REF! 12.94 Providing and fixing machine cut, mirror / eggshell polished , Marble stone DSR 1 Sqm 6,647.35
work for wall lining (veneer work) including dado, skirting, risers of steps etc.,
in required design and pattern wherever required, stones of different finished
surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3
oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including
pointing with white cement slurry admixed with pigment of matching shade,
including rubbing, curing, polishing etc. all complete as per Architectural
drawings, and as directed by the Engineer-in-Charge. a. 18 mm thick Italian
Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
#REF! 42.45 ovinding and fixing Polished Granite stone flooring in required design and DSR 1 Sqm 2,937.70
pattern, in linear as well as curvilinear portions of the building, all complete as
per the architectral drawing, with 18mm thick stone slab over 20 mm (avrage)
thick base of cement mortar 1:4 (1 cement:4coarse sand), laid and jointed with
cement slurry of maching with white cement slurry admixed with pigment of
matching shade, including rubbing, curind and polished etc. all complete as
specified and as directed by the Enginner-in-charge. Polished Granite stone
slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
#REF! 18.00 Providing and fixing aluminium extruded section body tubular type universal DSR 1 each 388.40
complete.
#REF! 75.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic DSR 1 each 88.10
required colour or shade, with necessary screws etc. complete : 250x10 mm
#REF! 80.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic DSR 1 each 64.30
#REF! 80.00 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating DSR 1 each 51.10
colour or shade, with necessary screws etc. complete : 125 mm
#REF! 18.00 Providing and fixing aluminium hanging floor door stopper, ISI marked, DSR 1 each 38.00
complete. Twin rubber stopper
#REF! 50.55 52 mm thick cement concrete flooring with concrete hardener topping, under DSR 1 sqm 555.25
#REF! 13.43 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement DSR 1 sqm 350.05
: 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick
#REF! 35.89 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness DSR 1 sqm 688.35
#REF! 463.36 Providing and laying vitrified floor tiles in different sizes (thickness to be DSR 1 Sqm 1,119.40
the joints with white cement and matching pigments etc., complete. Size of Tile
600x600 mm
#REF! 52.48 Providing and laying Vitrified tiles in different sizes (thickness to be specified DSR 1 Sqm 1,135.20
complete. Size of Tile 600x600 mm
#REF! 87.35 Providing and laying machine cut, mirror polished, Italian Marble stone DSR 1 sqm 5,006.10
flooring laid in required pattern in linear portion of the building all complete as
per architectural drawings, with 18 mm thick stone slab laid over 20 mm
(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
jointed with white cement slurry @ 4.4 kg/sqm including pointing with white
cement slurry admixed with pigment to match the marble shade including
rubbing, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato,
Rosso verona, Fire Red or Dark Emperadore etc.
#REF! 135.71 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : DSR 1 Mtr 153.00
4 stone aggregate 10 mm and down gauge), including finishing with cement
mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep
chase
#REF! 10.00 Making khurras 45x45 cm with average minimum thickness of 5 cm cement DSR 1 Each 187.60
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm
cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet complete.
#REF! 10 Providing and fixing to the inlet mouth of rain water pipe PTMT (an DSR 1 Each 66.45
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module
which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made
of 0.5 mm thick pre painted steel along the perimeter of the room with help of
nylon sleeves and wooden screws at 300 mm center to centre, suspending the
main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the
soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm
and C carrier suspension clip and main carrier bracket at 1000 mm c/c.
Inverted triangle shaped Spring Tee having height of 24 mm and width of 34
mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in
direction perpendicular to it at 600 mm centers with help of suspension
brackets. Wherever the main C carrier and spring T have to join, C carrier and
spring T connectors have to be used. All sections to be galvanized @ 120
gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with :
#REF! 414.35 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size DSR 1 Sqm 1,527.25
600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having
galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area
with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester
powder coated of thickness 60 microns (minimum), including factory painted
after bending and perforation.
#REF! 1438.00 Providing and fixing aluminium work for doors, windows, ventilators and DSR 1 kg 384.50
directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for separately) : for fixed portion,
Powder coated aluminium (minimum thickness of powder coating 50 micron)
#REF! 598.00 For shutters of doors, windows & ventilators including providing and fixing DSR 1 kg 444.90
be paid for separately) Powder coated aluminium (minimum thickness of
#REF! 17.69 Providing and fixing 12 mm thick prelaminated particle board flat pressed DSR 1 sqm 866.60
architectural drawings and directions of engineer-in-charge. Pre-laminated
#REF! 61.17 Providing and fixing glazing in aluminium door, window, ventilator shutters DSR 1 sqm 1,003.95
the architectural drawings and the directions of engineer-in-charge. With float
#REF! 63.50 Providing and fixing glazing in aluminium door, window, ventilator shutters DSR 1 sqm 1,153.90
the architectural drawings and the directions of engineer-in-charge. With float
glass panes of 8 mm thickness
#REF! 399.75 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone DSR 1 metre 62.45
#REF! 28.00 Providing and fixing 100mm brass locks (best make of approved quality) for DSR 1 each 359.00
#REF! 48.00 Providing and fixing aluminium casement windows fastener of required length DSR 1 each 55.50
for aluminium windows with necessary screws etc. complete. Powder coated
#REF! 55.00 Providing and fixing aluminium round shape handle of outer dia 100 mm with DSR 1 each 68.30
SS screws etc. complete as per direction of Engineerin-charge Powder coated
#REF! 395.80 Providing and laying integral cement based water proofing treatment including DSR 1 Sqm 1035
preparation of surface as required for treatment of roofs, balconies, terraces etc
consisting of following operations: a) Applying a slurry coat of neat cement
using 2.75 kg/sqm of cement admixed with water proofing compound
conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab
including adjoining walls upto 300 mm height including cleaning the surface
before treatment. b) Laying brick bats with mortar using broken bricks/brick
bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5
coarse sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge over 20 mm thick layer of cement mortar
of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the adjoining walls upto 300 mm height including
rounding of junctions of walls and slabs
c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1
cement :4 coarse sand) admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth
of approved quality in top layer of plaster and finally finishing the surface with
trowel with neat cement slurry and making pattern of 300x300 mm square 3
mm deep. e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above operations
to be done in order and as directed and specified by the Engineerin- Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65
mm.
#REF! 95.60 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 160 NS 1 Metre 430.00
mm dia conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single
socketed pipes.
#REF! 10.00 Providing and fixing on wall face unplasticised - PVC moulded shoe (plain) 160 NS 1 Each 315.00
mm dia for unplasticised Rigid PVC rain water pipes conforming to IS : 13592
Type A, including jointing with seal ring conforming to IS : 5382, leaving 10
mm gap for thermal expansion. 160 mm dia
#REF! 162.00 Supply and Fixing of Slim Glass partition of 10mm Toughened Glass using NS 1 Sqm 6,800.00
DORMA Alexa System-45 Frames to a height of maximum 3m or as per
drawing.The Fixed glass to be fixed using DORMA Alexa BP45 Profiles at Top &
Bottom & Alexa SP45 at sides. The profile size to be 45x25MM to be fixed on to
the floor/wall/ ceiling as per the architect design. DORMA Alexa H Junction
profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction
Profiles and T Junction profiles necessary as per design.In case of Glass overall
panel Alexa MP45 & BP45 Overpanel Profile to be used.In case of Open glass
edges EP45 End Profile to be used. The Alexa profiles shall be suitable for
Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized,
the Profile Manufacturer to supply all the necessary clips, seals and fixing
accessories for the system. All Profiles to be with 2 mm Gauge thickness
Excluding 20 Micron of Anodizing. Approved Manufacturer: Profiles/Frames:
DORMA, Glass : Saint Giobain/Asahi
#REF! 7.50 Supply & installation of frameless glass Door of approved make with overpanel NS 1 Sqm 18,000.00
/ sidelight using 12mm thick toughened glass of approved make with die cast
patch fitting with stainless steel cover PT -30 , PT-40 ,PT 10 , PT 20 , US 10
Lock. Pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable
fixing for glass. Length =450mm, 25mm dia, -SS304 Finish: mill, Floor spring
BTS 65 with std. spindle and cover plate. As per DIN EN 1154.(500,000 cyle
tested ) , Finish: Satin stainless steel. Floor stop half dome with 45mm dia
with fixing accessories, in satin Chrome. The work should be executed as per
manufacturer's specifications and complete in all respect as per approved
drawings and to the satisfaction of Architect /Engineer-in-Charge.
#REF! 28.98 Supply & Fixing of Glass Door of 10mm toughened glass with DORMA Alexa NS 1 sqm 26,450.00
System-45 frames all around the door. Alexa DP45 Door Profile frame of size
45X50mm with seals with DORMA Junior Office Hinges (3nos) & Studio Gala
Locks (1no) in aluminium silver (EV1) finish and DORMA TS 89 Slide Channel
Door closer with (as per EN 1154) and saddle plate for fixing on the Glass door
and necessary seals to be provided all around the door frames. In case of Glass
over panel Alexa OHP-DP45 Over Panel Door profile to be used.
The Alexa profiles shall be suitable for Glass thickness of 10/12/13.52mm.The
Profile shall be matt natural anodized, the Profile Manufacturer to supply all
the necessary clips, seals and fixing accessories for the system.
All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of
Anodizing.
Approved Manufacturer: Profiles/Frames: DORMA, Glass : Saint
Giobain/Asahi
#REF! 8.00 Providing and fixing Greenlam / Merino Sturdo Classique Evergreen Toilet NS 1 Each 32381
cubicle (of following standard dimensions which includes 600 mm door size
width) made of heat, bacteria, water, chemical, scratch, impact and anti
bacterial resistant 12mm thick solid compact laminate panels tested by
Shriram Test House. Finish of the compact laminate should be suede / raw
Silk which includes doors, pilasters and intermediate panels finished with
approved textures / shade as per the detailed drawings and as per IS 2046
(Indian Standard) and as per Fire Retardent BS -476 / 97 Standard. The
product should have green guard certificate.
This also includes providing and fixing in position necessary hardware made
out of stainless steel (Grade 304) as per manufacturer's specifications and
Architect's Instructions like Door knob, gravity hinges, thumb turn lock set
with occupancy indicators, coat hooks with door stoppers, U channels,
adjustable foot / padestal, top rail with corner contactor, rubber noise
deafening tape and screws and wall plugs etc.
The top fitting should consist of SS round top rail which will get fixed with
used only on the wall which will hold the SS top rail.
All screws will be of 304 grade in stainless steel with satin finish. All pilasters
are supported by stainless steel, bottom cladding. The base of the stainless
steel bottom cladding will be anchored to the floor with a clear height upto 150
mm.Toilet cubicle with a standard dimension of 2025 mm height x 1000 mm
width x 1550 mm depth which includes 600 mm door size width.
#REF! 80.50 H.)CONSTRUCTION OF ATC TOWER Reinforced Brick Masonry for partition APSS 1 Sqm 714.00
walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using common burnt
clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or
traditional size 23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in
every third layer with free ends of the reinforcement pegged into mortar joints
of main brick walls where applicable including cost and conveyance of all
materials like cement, steel, sand, bricks, water etc., to site, including sales &
other taxes on all materials, all operational, incidental charges such as labour
charges for mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, etc., and overheads & contractors profit but excluding cost
of steel and its fabrication charges complete for finished item of work. (APSS
No. of 501 & 509) First Storey
#REF! 80.51 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. APSS 1 Sqm 760.00
(Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:
1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the reinforcement
pegged into mortar joints of main brick walls where applicable including cost
and conveyance of all materials like cement, steel, sand, bricks, water etc., to
site, including sales & other taxes on all materials, all operational, incidental
charges such as labour charges for mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges complete for
finished item of work. (APSS No. of 501 & 509) Second Storey
finished item of work. (APSS No. of 501 & 509) Third Storey
finished item of work. (APSS No. of 501 & 509) Fourth Storey
finished item of work. (APSS No. of 501 & 509) Fifth Storey
#REF! 184.77 Plastering 12mm thick single coat in CM(1:5) using screened sand including APSS 1 Sqm 114.00
& contractors profit complete for finished item of work.(SS 901,903 & 904)
First Storey
Second Storey
Third Storey
Fourth Storey
Fifth Storey
& contractors profit complete for finished item of work .(SS 901,903 & 904)
FIRST STOREY
SECOND STOREY
THIRD STOREY
FOURTH STOREY
FIFTH STOREY
for treads and risers (S.S.701 & special) for Tread First Storey
for treads and risers (S.S.701 & special) for Tread Second Storey
for treads and risers (S.S.701 & special) for Tread Third Storey
for treads and risers (S.S.701 & special) for Tread Fourth Storey
for treads and risers (S.S.701 & special) for TreadFifth Storey
for treads and risers (S.S.701 & special) for Riser First Storey
for treads and risers (S.S.701 & special) for RiserSecond Storey
for treads and risers (S.S.701 & special) for RiserThird Storey
for treads and risers (S.S.701 & special) for RiserFourth Storey
for treads and risers (S.S.701 & special) for RiserFifth Storey
#REF! 14.51 Providing cladding to walls with High Polished Granite 16 to 18 mm thick up APSS 1 Sqm 3,816.00
First Storey
Second Storey
Third Storey
Fourth Storey
profit complete for finished item of work. Second Storey
profit complete for finished item of work. Third Storey
profit complete for finished item of work. Fourth Storey
profit complete for finished item of work. Fifth Storey
#REF! 120.83 Supplying and fixing of stainless steel ( grade 304 ) hand railing as per APSS 1 Sqm 4,954.00
charges , overheads & contractors profit etc. complete for finished item of work.
#REF! 50.00 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5 APSS 1 Sqm 274.00
mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC
Bends, shoes, iron / PVC clamps and all other accessories and fixing in
position including cost and conveyance of all materials, sales & other taxes on
materials to site, operational & incidental charges including all labour charges
for fixing at site etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 1328)
#REF! 1,029.90 Providing and applying Wall putty of White Cement or Polymer or Cement APSS 1 Sqm 197.00
profit etc. complete for finished item of work in all floors for Internal walls
#REF! 385.60 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture APSS 1 Sqm 246.00
muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and
conveyance of all materials to work site and all operational, incidental, labour
charges, scaffolding charges, overheads and contractors profit etc., complete
for finished item of work in all floors for external walls.
#REF! 1,151.75 Supply & application of one coat water based cement primer of interior grade I APSS 1 Sqm 131.00
#REF! 135.98 Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic APSS 1 Sqm 89.00
#REF! 121.85 Supplying and fixing Gyp Board Suspended regular single layer false ceiling APSS 1 Sqm 969.00
for finished item of work.
#REF! 200.00 Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing APSS 1 Sqm 716.00
sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile
Strength: 550 MPA. Paint coating: Regular Modified Polyester painting.
Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet
Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed
with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled
with white lead & including a coat of approved steel primer and two coats of
approved paint on over lapping of sheets complete (up to a pitch of 600) etc.,
complete, excluding the cost of purlins, rafters, trusses including cost and
conveyance of all materials , labour charges , overheads and contractors profit
etc., complete for finished item of work in all floors.
#REF! 8.25 2.27/DSR 1 Cum 828.00
Filling with carted Stonedust in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ram
#REF! 33.74 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 4.17 1 Sqm 450.35
and grouted with fine sand, including finishing the top
smooth.
#REF! 609.63 Centering and shuttering including strutting, propping etc. and removal of 5.9.2 1 Sqm 378.60
form for : Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
#REF! 8.95 Centering and shuttering including strutting, propping etc. and removal of 5.9.4 1 Sqm 422.3
form for : Shelves (Cast in situ)
#REF! 0.42 Providing and laying in position ready mixed M-25 grade concrete for 5.37.2 1 Cum 7,517.20
reinforced cement concrete work, using cement content as per approved design
mix, manufactured in fully automatic batching plant and transported to site of
work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for reinforced cement
concrete work, including pumping of R.M.C. from transit mixer to site of laying
, excluding the cost of centering, shuttering finishing and reinforcement,
including cost of admixtures in recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve workability without impairing
strength and durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less
cement used as per design mix is payable/recoverable separately). All works
above plinth & up to floor V level.
#REF! 33.75 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt 6.44 1 Metre 39.20
#REF! 8.50 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded 8.2.2.1 1 Sqm 3,351.95
high gloss finish etc. complete at all levels Granite of any colour and shade.
#REF! 30.00 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., 8.3.2 1 Metre 245.70
per design approved by Engineer-in-Charge. Granite work
#REF! 26.00 Extra for fixing marble /granite stone, over and above corresponding basic 8.4 1 Metre 266.25
#REF! 10 Extra for providing opening of required size & shape for wash basin/ kitchen 8.5 1 Each 427.95
#REF! 21 Providing and fixing aluminium extruded section body tubular type universal 9.84 1 Each 388.40
complete.
#REF! 52 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic 9.97.2 1 Each 88.10
#REF! 21 Providing and fixing aluminium hanging floor door stopper, ISI marked, 9.101.2 1 Each 38
#REF! 90.25 Structural steel work riveted, bolted or welded in built up sections, trusses and 10.2 1 Kg 6,172.00
framed work, including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer all complete.
#REF! 160.00 Providing and fixing mild steel round holding down bolts with nuts and washer 10.19 1 Kg 0.00
plates complete.
90.25 5,599.44
Steel work in builtup tubular(round,square,rectangular hallow tubesetc)trusses etc including cutting hoisting fixing in position and applying primin
#REF! 30.00 Extra for pre finished nosing to treads of steps of marble stone. 11.24 1 Metre 306.25
#REF! 22.50 Extra for marble stone flooring in treads of steps and risers using single length 11.25 1 Sqm 357.95
up to 2.00 metre.
#REF! 20.75 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness 11.37 1 Sqm 688.35
#REF! 281.51 Providing and laying vitrified floor tiles in different sizes (thickness to be 11.41.2 1 Sqm 1,119.40
the joints with white cement and matching pigments etc., complete. Size of Tile
600x600 mm
#REF! 28.15 Providing and laying Vitrified tiles in different sizes (thickness to be specified 11.46.2 1 Sqm 1,135.20
complete. Size of Tile 600x600 mm
#REF! 75.81 Providing and laying machine cut, mirror polished Marble stone flooring, in 11.52.1 1 Sqm 5,233.75
required design (Simple geometrical, abstract etc.) and in patterns in
combination with Italian marble stones of different colours, shades and
finished surface texture etc., in linear portions of the building, all complete as
per the architectural drawings, with 18 mm thick stone slab laid over 20 mm
(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
jointed with white cement slurry @ 4.4 kg/sqm including pointing with white
cement slurry admixed with pigment to match the marble shade including
rubbing, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato,
Rosso verona, Fire Red or Dark Emperadore etc. 18 mm thick Italian Marble
stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperadore etc.
#REF! 28.00 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 12.41.1 1 Metre 148.75
to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single
socketedpipes. 75 mm diameter
#REF! 4 Providing and fixing on wall face unplasticised - PVC moulded fittings/ 12.42.6.1 1 Each 66.10
13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving
10 mm gap for thermal expansion. 75 mm Shoe (Plain)
#REF! 24 Providing and fixing unplasticised -PVC pipe clips of approved design to 12.43.1 1 Each 182.55
unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood
plugs, screwed with M.S. screws of required length, including cutting brick
work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making
good the wall etc. complete. 75 mm
#REF! 36 Providing and fixing unplasticised -PVC pipe clips of approved design to 12.43.2 1 Each 181.40
unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood
plugs, screwed with M.S. screws of required length, including cutting brick
work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making
good the wall etc. complete. 110 mm
#REF! 6 Providing and fixing to the inlet mouth of rain water pipe PTMT (an 12.46 1 Each 66.45
#REF! 163.84 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module 12.54.2 1 Sqm 1527.25
which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made
of 0.5 mm thick pre painted steel along the perimeter of the room with help of
nylon sleeves and wooden screws at 300 mm center to centre, suspending the
main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the
soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm
and C carrier suspension clip and main carrier bracket at 1000 mm c/c.
Inverted triangle shaped Spring Tee having height of 24 mm and width of 34
mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in
direction perpendicular to it at 600 mm centers with help of suspension
brackets. Wherever the main C carrier and spring T have to join, C carrier and
spring T connectors have to be used. All sections to be galvanized @ 120
gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with :
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size
600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having
galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area
with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester
powder coated of thickness 60 microns (minimum), including factory painted
after bending and perforation.
#REF! 197.37 Extra for plastering exterior walls of height more than 10 m from ground level 13.22 1 Sqm 40.65
for every additional height of 3 m or part thereof.
#REF! 675.00 Providing and fixing aluminium work for doors, windows, ventilators and 21.1.1.2 1 Kg 384.50
paid for separately) For Fixed Portion : Powder coated aluminium (minimum
thickness of powder coating 50 micron)
#REF! 673.00 For shutters of doors, windows & ventilators including providing and fixing 21.1.2.2 1 Kg 444.90
#REF! 49.01 Providing and fixing 12 mm thick prelaminated particle board flat pressed 21.2.2 1 Sqm 866.60
architectural drawings and directions of engineer-in-charge. Pre-laminated
#REF! 2.40 Providing and fixing glazing in aluminium door, window, ventilator shutters 21.3.2 1 Sqm 1,003.95
the architectural drawings and the directions of engineer-in-charge.
(Cost of aluminium snap beading shall be paid in basic item): With float glass
panes of 5.50 mm thickness
#REF! 8.28 Providing and fixing glazing in aluminium door, window, ventilator shutters 21.3.3 1 Sqm 1,153.90
panes of 5.50 mm thickness With float glass panes of 8 mm thickness
#REF! 191.70 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone 21.8.1 1 Metre 62.45
#REF! 4 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm 21.12.2 1 Each 509.30
thick & 2100 mm long with SS screws etc .complete as per direction of
Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium
tubular handle bar
#REF! 16 Providing and fixing 100mm brass locks (best make of approved quality) for 21.13 1 Each 359.00
#REF! 82 Providing and fixing aluminium round shape handle of outer dia 100 mm with 21.16.2 1 Each 68.30
#REF! 4460.00 Providing and supplying aluminium extruded tubular and other aluminium 25.1 1 Kg 338.25
sections as per the architectural drawings and approved shop drawings, the
aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super
durable powder coating of 60-80 microns conforming to AAMA 2604 of required
colour and shade as approved by the Engineer-in-Charge. (The item includes
cost of material such as cleats, sleeves, screws etc. necessary for fabrication of
extruded aluminium frame work. Nothing extra shall be paid on this account).
532 422.89 Designing, fabricating, testing, protection, installing and fixing in position semi 25.2 1 sqm 2409.9
(grid) unitized system of structural glazing (with open joints) for linear as well
as curvilinear portions of the building for all heights and all levels, including:
532 422.89 25.2 1 sqm 2409.9
Structural analysis & design and preparation of shop drawings for the specified
design loads conforming to IS 875 part III (the system must passed the proof
test at 1.5 times design wind pressure without any failure), including
functional design of the aluminum sections for fixing glazing panels of various
thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws,
toggles, nuts, bolts, clamps etc., structural and weather silicone sealants,
flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets
for water tightness, pressure equalisation & drainage and protection against
fire hazard
including:
Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions
Providing and filling, two part pump filled, structural silicone sealant and one
part weather silicone sealant compatible with the structural silicone sealant of
required bite size in a clean and controlled factory / work shop environment ,
including double sided spacer tape, setting blocks and backer rod, all of
approved grade, brand and manufacture, as per the approved sealant design,
within and all around the perimeter for holding glass.
Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions
Making provision for drainage of moisture/ water that enters the curtain
glazing system to make it watertight, by incorporating principles of pressure
equalization, providing suitable gutter profiles at bottom (if required), making
necessary holes of required sizes and of required numbers etc. complete. This
item includes cost of all inputs of designing, labour for fabricating and
installation of aluminium grid, installation of glazed units, T&P, scaffolding
and other incidental charges including wastages etc., enabling temporary
structures and services, cranes or cradles etc. as described above and as
specified. The item includes the cost of getting all the structural and functional
design including shop drawings checked by a structural designer, dully
approved by Engineer-in-charge. The item also includes the cost of all mock
ups at site, cost of all samples of the individual components for testing in an
approved laboratory, field tests on the assembled working structural glazing as
specified, cleaning and protection till the handing over of the building for
occupation. In the end, the Contractor shall provide a water tight structural
glazing having all the performance characteristics etc. all complete as required,
as per the Architectural drawings, as per item description, as specified, as per
the approved shop drawings and as directed by the Engineerin-Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes,
extruded aluminium section capping for fixing in the grooves of the curtain
glazing and vermin proof stainless steel wire mesh shall be paid for separately
under relevant items under this subhead. However, for the purpose of
payment, only the actual area of structural glazing (including width of grooves )
on the external face shall be measured in sqm. up to two decimal
Note:-2. The following performance test are to be conducted on structural

glazing system if area of structural glazing exceeds 2500 Sqm from the certified
laboratories accreditated by NABL(National Accreditation Board for Testing and
Calibration Laboratories), Department of Science & Technologies, India. Cost of
testing is payable separately. The NIT approving authority will decide the
necessity of testing on the basis of cost of the work, cost of the test and
importance of the work. Performance Testing of Structural glazing system Tests
to be conducted in the NBL Certified
laboratories
Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing
Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing method for a range up to 2000 ml.”
Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”
Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME- 330
Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method
for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water
Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”
533 422.89 Providing, assembling and supplying vision glass panels (IGUs) comprising of 25.30 1.00 Sqm 3,730.70
hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel
units of size and shape as required and specified, comprising of an outer heat
strengthened float glass 6mm thick, of approved colour and shade with
reflective soft coating on surface # 2 of approved colour and shade, an inner
Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide,
dessicants, including primary seal and secondary seal (structural silicone
sealant) etc. all complete for the required performances, as per the
Architectural drawings, as per the approved shop drawings, as specified and as
directed by the Engineer-in-Charge. The IGUs shall be assembled in the
factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in
the curtain glazing is included in cost of item No.25.2) For payment, only the
actual area of glass on face # 1 of the glass panels (excluding the areas of the
grooves and weather silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating
on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved
make having properties as visible Light transmittance (VLT) of 25 to 35 %,
Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The
properties of performance glass shall be decided by technical sanctioning
authority as per the site requirement.
534 42.29 Extra for openable side / top hung vision glass panels (IGUs) including 25.4 1 Sqm 2,941.60
providing and supplying at site all accessories and hardwares for the openable
panels as specified and of the approved make such as heavy duty stainless
steel friction hinges, min 4 -point cremone locking sets with stainless steel
plates, handles, buffers etc. including necessary stainless steel screws/
fasteners, nuts, bolts, washers etc. all complete as per the Architectural
drawings, as per the approved shop drawings, as specified and as directed by
the Engineerin- Charge.
535 39.00 Providing, fabricating and supplying shadow box of required size and shape, 25.5 1 Sqm 1,542.60
for fixing in the spandrel portion of the structural glazing, in linear as well as
curvilinear portions of the building by providing semi -rigid, inorganic, non-
combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183
and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on
surface # 1of the fibre glass insulation layer), of black nonwoven fibre glass
tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /
sqm, made of randomly oriented glass fibres distributed in a binder by a wet-
lay process including fixing 1.5 mm thick solid aluminum sheet backing using,
6 mm thick cement board including SS rivets, nuts, bolts, washers etc
complete.
536 39.00 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat 25.6 1 Sqm 2,798.70
strengthened monolithic float glass of approved colour and shade with
reflective soft coating on surface # 2 of approved colour and shade so as to
match the colour and shade of the IGUs in the vision panels etc. ,all complete
for the required performances as specified, as per the Architectural drawings,
as per the approved shop drawings, as specified, and as directed by the
Engineer- in- harge. For payment, only the actual area of glass on face # 1 of
the glass panels (but excluding the area of grooves and weather silicone
sealant) provided and fixed in position, shall be measured in sqm.(Payment for
fixing of Spandrel Glass Panels in the curtain glazing is included in cost of
relevent Item*).
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating
on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35%,
Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The
properties of performance glass shall be decided by technical sanctioning
authority as per the site requirement.
537 225.13 Designing, fabricating, testing, installing and fixing in position Curtain Wall 25.7 1 Sqm 3,405.90
with Aluminium Composite Panel Cladding, with open grooves for linear as well
as curvilinear portions of the building, for all heights and all levels etc.
including:
Structural analysis & design and preparation of shop drawings for pressure
equalisation or rain screen principle as required, proper drainage of water to
make it watertight including checking of all the structural and functional
design.
Providing, fabricating and supplying and fixing panels of aluminium composite
panel cladding in pan shape in metalic colour of approved shades made out of
4mm thick aluminium composite panel material consisting of 3mm thick FR
grade mineral core sandwiched between two Aluminium sheets (each 0.5mm
thick). The aluminium composite panel cladding sheet shall be coil coated,
with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of
approved colour and shade on face # 1 and polymer (Service) coating on face #
2 as specified using stainless steel screws, nuts, bolts, washers, cleats,
weather silicone sealant, backer rods etc.
The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip
Galvanised with serrations and serrated washers to arrest the wind load
movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS
316, Nylon separators to prevent bi-metallic contacts all complete required to
perform as per specification and drawing The item includes cost of all material
& labour component, the cost of all mock ups at site, cost of all samples of the
individual components for testing in an approved laboratory, field tests on the
assembled working curtain wall with aluminium composite panel cladding,
cleaning and protection of the curtain wall with aluminium composite panel
cladding till the handing over of the building for occupation. Base frame work
for ACP cladding is payable under the relevant aluminium item.s The
Contractor shall provide curtain wall with aluminium composite panel
cladding, having all the performance characteristics all complete , as per the
Architectural drawings, as per item description, as specified, as per the
approved shop drawings and as directed by the Engineer-in-Charge. However,
for the purpose of payment, only the actual
area on the external face of the curtain wall with Aluminum Composite Panel
Cladding (including width of groove) shall be measured in sqm. up to two
decimal places.
538 30.56 “Design supply & installation of suspended Spider Glozing system designed to 25.8 1 Sqm 6,928.55
withstand the wind pressure as pr IS 875 (Part-III). The Suspended System
held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with
glass panel having 12 mm thick clear toughened glass held together with SS-
316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21
mm thick. The Glass fins and glass panel assembly shall be connected to
Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor
bolts and at the bottom using SS channel of 50x25x2mm using fastener &
anchor bolts, non staining weather sealants of approved make, Teflon/ nylon
bushes and separators to prevent bi-metallic contacts, all complete to perform
as per specification and approved drawings. The complete system to be
designed to accommodate thermal expansion & seismic movements etc. The
joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U
channel of the assembly to be filled with non staining weather sealant, so as to
make the entire system fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing including
approval from structural designer, labour, T&P, scaffolding, other
incidentalcharges including wastage, enabling temporary services all fitting
fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel
laminated glass etc. all complete. For the purpose of payment, actual elevation
area of Glazing including thickness of joints and the portion of Glass panel
inside the SS channel shall be measured. “
539 66.20 Design, supply and erection of gutters manufactured out of High tensile N.S 1 Sqm 1,800.00
galvalume steel to required lengths as per designed profile and size . The steel
shall be high tensile 550 Mpa yield strength , and manufactured to As 1397
standard. The external side shall have 20 micron colour coating of SMP and
internal side a backing coat over epoxy primer. The end laps shall be joined
using nut bolts and the gutter straps shall be fixed using self drilling and self
tapping screws 3.complete in all respects, for proper completion of the work.
540 3.75 Supply & installation of frameless glass Door of approved make with overpanel NS 1 Sqm 18,000.00
/ sidelight using 12mm thick toughened glass of approved make with die cast
patch fitting with stainless steel cover PT -30 , PT-40 ,PT 10 , PT 20 , US 10
Lock. Pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable
fixing for glass. Length =450mm, 25mm dia, -SS304 Finish: mill, Floor spring
BTS 65 with std. spindle and cover plate. As per DIN EN 1154.(500,000 cyle
tested ) , Finish: Satin stainless steel. Floor stop half dome with 45mm dia
with fixing accessories, in satin Chrome. The work should be executed as per
manufacturer's specifications and complete in all respect as per approved
drawings and to the satisfaction of Architect /Engineer-in-Charge.
541 5.58 I).CONSTRUCTION OF OVER HEAD TANK APSS 1 Cum 851.00

Supplying and filling in plinth with stone dust under floors, including
watering, ramming, consolidating and dressing complete.
5.58 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for APSS 1 Cum 3,459.00
foundations and under flooring bed using coarse aggregate 40mm size hard,
machine crushed granite from approved quarry including cost and conveyance
of all materials like cement, sand, coarse aggregate, water etc. to site, including
sales & other taxes on all materials and including all charges for machine
mixing, laying concrete in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level curing etc., and overheads
& contractors profit complete for finished item of work. (APSS No. 402)
542
1,233.65 Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic APSS 1 Sqm 89.00
543
544 81.00 52 mm thick cement concrete flooring with concrete hardener topping, under APSS 1 Sqm 555.25
545 2 Providing & fixing SMC Panel Tank of approximate Capacity 50,000 lt. of APSS 1 Each 725,000.00
standard approved make including installation at approximate height of 15.00
mtr. complete in all respect as per site requirement and as directed by
Engineer-in-charge.
546 192.83 J)CONSTRUCTION OF WATCH TOWER Earth work APSS 1 Cum 94.00
excavation for foundations (Mechanical Means) for buildings in ordinary soils
and depositing on bank for all lifts and with an initial lead of 10m and up to
3m depth including all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges etc., as per SS 20 B
(APSS 308)
547 321.39 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositingCum
on bank
( for596.00)
all lifts and with an initial lead of 1
548 0.00 Filling with useful available excavated earth (excluding rock) with a lead of 50 APSS 1 Cum 0.00
m in trenches, sides of foundations and basement with initial lead in layers not
exceeding 15cm thick, watering and ramming including cost and conveyance of
water to work site and all operaitonal, incidental, labour charges, hire charges
of T&P etc., and overheads & contractors profit complete for fnished item of
work (APSS NO.309&310)
549 612.35 Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not
Cumexceeding537
15cm thick,watering and ramming
550
11.91 Filling with carted Stonedust in trenches,sides of foundations and basement with initial lead in layers
Cumnot exceeding
828 15cm thick,watering and ram
71.61 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for APSS 1 Cum 3,459.00
foundations and under flooring bed using coarse aggregate 40mm size hard,
machine crushed granite from approved quarry including cost and conveyance
of all materials like cement, sand, coarse aggregate, water etc. to site, including
551 sales & other taxes on all materials and including all charges for machine
mixing, laying concrete in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level curing etc., and overheads
& contractors profit complete for finished item of work. (APSS No. 402)
72.06 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS APSS 1 Cum 7,768.00
456 with minimum cement content of 380 kgs per 1 cum of concrete using
WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
Part 8) from approved quarry including cost and conveyance of all materials
like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales
552 & other taxes on all materials , centering using Steel scaffolding pipes , jack
props , wallers , Foot plates , brackets , steel centering plates etc., including all
operational, incidental and labour charges such as weigh batching, machine
mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402) Footing
553 36.79 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS APSS 1 Cum 8,129.00
& other taxes on all materials , centering using Steel scaffolding pipes , jack
fabrication charges for finished item of work (APSS No. 402) Column Padestals
18.72 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS APSS 1 Cum 9,729.00
554 & other taxes on all materials , centering using Steel scaffolding pipes , jack
fabrication charges for finished item of work (APSS No. 402) Plinth Beams
555 19.14 Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786- APSS 1 MT 50,973.00
1979) of different diameters for RCC works , including labour charges for
straightening, cutting, bending to required sizes and shapes, placing in
position with cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for reinforcement work as
per approved designs and drawings, including cost and conveyance of steel
bars, including all wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and all incidental,
operational, labour charges such as cutting, bending, placing in position, tying
including sales and other taxes on all materials etc. ,and overheads &
contractors profit complete for finished item of work.( APSS No.126) First
Storey
556 62.40 Plastering 12mm thick single coat in CM(1:5) using screened sand including APSS 1 Sqm 114.00
& contractors profit complete for finished item of work.(SS 901,903 & 904) For
basment
557 62.40 Painting to new walls with 2 coats of water proof cement paint of shade as APSS 1 Sqm 114.00
approved by the Engineer-In-Charge over a base coat of aproved white cement
base coat making 3 coats in all to give an even shade after thourughly
brushing the surface to remove all dirt and remains of loose powdered
materials, including cost and conveyance of all materials to work site and all
operational, incidental, labour charges etc., and overheads & contractors profit
complete for finished item of work as per SS 912 in all floors
558 1656.37 Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic APSS 1 Sqm 89.00
559 8.39 Brick work with common burnt clay F.P.S. (non modular) bricks of class 6.1.2 1 Sqm 4,751.65
designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6
coarse sand)
560 16.00 Providing and fixing aluminium extruded section body tubular type universal 9.84 1 each 388.40
complete.
561 32.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic 9.97.2 1 Each 88.10
562 16.00 Providing and fixing aluminium hanging floor door stopper, ISI marked, 9.101.2 1 Each 38.00
563 0.00 Structural steel work riveted, bolted or welded in built up sections, trusses and 10.2 1 Kg 0.00
framed work, including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer all complete. Details Attached (For 1 No.
Watch Tower)
Kg
564 15,984.00 Steel work in builtup tubular(round,square,rectangular hallow tubesetc)trusses etc including cutting hoisting
( fixing
90.25)
in position and applying primin
565 803.88 Providing and fixing mild steel round holding down bolts with nuts and washer 10.19 1 Kg 68.00
plates complete.
566 7730.24 Steel work welded in built up sections/ framed work, including cutting, 10.25.1 1 Kg 65.80
hoisting, fixing in position and applying a priming coat of approved steel primer
using structural steel etc. as required. In stringers, treads, landings etc. of
stair cases, including use of chequered plate wherever required, all complete
567 13114.80 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar 10.25.2 1 Kg 85.95
works
568 79.38 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone 11.3.1 1 Sqm 362.60
aggregate) finished with a floating coat of neat cement, including cement
slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick
with 20 mm nominal size stone aggregate
569 120.00 Providing and fixing aluminium work for doors, windows, ventilators and 21.1.1.2 1 Kg 384.50
directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for separately) : Powder coated
aluminium (minimum thickness of powder coating 50 micron)
570 150.00 For shutters of doors, windows & ventilators including providing and fixing 21.1.2.2 1 Kg 444.90
571 72.00 Providing and fixing glazing in aluminium door, window, ventilator shutters 21.3.3 1 Sqm 1,153.90
panes of 8 mm thickness
572 214.00 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone 21.8.1 1 Metre 62.45
573 8.00 Providing and fixing 100mm brass locks (best make of approved quality) for 21.13 1 Each 359.00
574 16.00 Providing and fixing aluminium round shape handle of outer dia 100 mm with 21.16.2 1 Each 68.30
Supply and fixing of 75 mm thk. AEROCON panels of size 2400/2700/3000

mm length and 600 mm wide having Tongue & Groove joint system for
ceiling with a density of 780 kg/cum having K value : 0.21 W/mK, Axial
load/metre width : 83 KN/m having a fire rating of 120 minutes and 36 db
sound insulation.
The panels are made of two fibre reinforced cement sheets enclosing a light
weight aerated concrete core composed of cement & binders. The fibre
reinforced cement sheets are confirming to IS 13000--1990 / IS 14862-
575 288.00 2000 .These panels need to meet transverse load & modulus of rupture Sqm ( 2,000.00)
requirements as per ASTM-E-72:98 & IS 2380 Part 4. The AEROCON panels
should be supported on the existing grid frame of MS Steel hollow section,
as per drawings. The panels to be jointted with resin based glue mixed with
hardner (SmartBond) for jointing tongue & groove of refabricated panels and
glass fibre reinforced mesh tape 16 mm wide to be surfacially fitted at joint
and finished with resin based jointing compound 100 mm wide complete in
all respects as per sit requirement and as per directions of the Engineer-in-
Charge.For watch towers
Providing and applying Wall putty of White Cement or Polymer or Cement
dirt and remains of loose powdered materials, applying emery paper, Sand
the surface, clean & wipe off loose dust, applying knifing paste filler by putty
576 576.00 Sqm ( 197.00)
knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery
paper for the surface preparation including cost and conveyance of all
materials to work site and all operational, incidental, labour charges, over
heads and contractors profit etc., complete for finished item of work in all
floors for Internal walls
Supply & application of one coat water based cement primer of interior
grade I and two coats of acrylic emulsion paint having VOC (Volatile
Organic Compound) content less than 50 grams/litre for internal walls
577 576.00 Sqm ( 136.00)
including cost and conveyance of all materials to site, sales & other taxes,
incidental, operational and all labour charges etc., and overheads &
contractors profit complete for finished item of work in all floors.
Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing
sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM.
Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester
painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7
Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular
578 184.32 Range Colours fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I Sqm ( 716.00)
limpet washers filled with white lead & including a coat of approved steel
primer and two coats of approved paint on over lapping of sheets complete
(up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters,
trusses including cost and conveyance of all materials , labour charges ,
overheads and contractors profit etc., complete for finished item of work in
all floors.
579 43 K.) SUB ESTIMATE PUBLIC HEALTH Supply, Installation and commissioning APSS 1 Each 9689
approved make floor mounted Close coupled EWC suit CASCADE model 'P' or
'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of
dual flush cistern, ultra solid seat cover of approved make with rubber buffer
and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall
flanges all of approved make etc. complete for finished item of work in all
respects: White Colour
580 43 Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall APSS 1 Each 4360
hook of Jaquar make queen series with 7 years warranty Chrome plated
581 43 Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years APSS 1 Each 1350
warranty: Chrome plated
582 43 Supply & Fixing of towel coat hook Jaquar make Queen series with 7 years APSS 1 Each 944
583 30 Supply & Fixing of Towel ring Jaquar make Queen series with 7 years APSS 1 Each 1269
584 30 a) S & F liquid soap container NP metallic with NP brackets and screws. APSS 1 Each 243
585 44 Supplying & fixing oval shape basin white (520x410mm) parry or equivalent APSS 1 Each 2481
586 46 Supply & fixing of Bottle trap Jaquar make with 7 years warranty: Chrome APSS 1 Each 1704
plated
587 44 Supply & fixing pillar cock Jaquar make Queen series with 7 years warranty: APSS 1 Each 1806
Chrome plated
588 30 a) Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x APSS 1 Each 513
457 .2 mm
589 2 Supplying & Fixing Indian make white glazed vitreous china porcelain sink APSS 1 Each 4959
conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings
like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 600 x 400 x 250
590 2 S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian APSS 1 Each 637
make
591 21 Supplying & Fixing white glazed flat back half stall urinals 1st quality APSS 1 Each 3100
conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95
x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete
Indian make : 590 x 375 x 390 mm
592 2 Supply, Transportation and fixing of storage / Pressure type Vertical / APSS 1 Each 8866
Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water
heater with SS tank and ABS plastic body of 15 Ltrs capacity to withstand up
to 6.5 bar of water pressure including all standard accessories and dead weight
pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC /
Metallic hose pipe, testing and all labour charges etc., complete. Makes:
Crompton model No. solarium plus SWH 725, Class 1 rated or its equivalent
make of Bajaj / Venus / Racold / Usha / V 1uard / Havells.
593 46 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of 18.53.1 1 Each 475.7
approved quality conforming to IS:8931 a) 15 mm nominal bore DSR
594 47 Providing and fixing uplasticised PVC connection pipe with brass unions : 15 18.21.2.1 1 Each 67.80
mm nominal bore
595 16 Providing and fixing stone slab with table rubbed, edges rounded and polished, 8.10.2 1 Sqm 2831.95
of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a
chase of appropriate width with chase cutter and embedding the stone in the
chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 6 mm nominal size) as per direction of
Engineer-in-charge and finished smooth. Granite Stone of approved shade
596 2 Providing and fixing ball valve (brass) of approved quality, High or low 18.18.2 1 Each 327.05
pressure, with plastic floats complete : 20 mm nominal bore
597 2 Providing and fixing ball valve (brass) of approved quality, High or low 18.18.3 1 Each 331.95
pressure, with plastic floats complete : 25 mm nominal bore
598 29 Providing, fixing & testing fully automatic "No touch" hand drier suitable to NS-1 1 Each 7395
operate on 230 volts, single phase, 50 Hz AC power supply complete with
brackets including cutting and making good the walls wherever required.
599 29 Providing and Fixing Toilet paper Dispenser with wooden cleats and C.P. brass NS-2 1 Each 7395
screws including cutting and making good the wall wherever required.
600 2 Providing and Fixing 600 mm long Hand rail (Grab bar) for Handicap Toilets NS-3 1 Each 1275
with Stainless Steel Screws on wooden cleats complete as per instructions of
the engineer-in-charge or as per equivalent make .
601 60 Providing and fixing chrome plated grating with ring and two S.S screws of NS-4 1 Each 525
approved design with grating screwed down to the ring with s/s screws and
embedding and setting ring into the floor with cement mortar .(As per approved
make or equivalent)
602 1 Providing and fixing C.I double flanged equilibrium float valve with M.S. lever NS-5 1 Each 4020
high pressure, copper ball and flanges including nuts, bolts, 3mm thick rubber
insertions complete. in all respect as per direction of the Engineer-in-
Charge. 40mm dia
603 1 Providing and fixing C.I double flanged equilibrium float valve with M.S. lever NS-5 1 Each 4675
Charge. 50mm dia
604 25 75 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipes per IS: 17.35.2.2 1 Mtr 794.55
3989
605 405 100 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipes per IS: 17.35.1.2 1 Mtr 921.65
3989
606 25 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes 17.65.2 1 Mtr 31
and fittings with two coats of synthetic enamel paint of any colour such as
chocolate grey, or buff etc. over a coat of primer (of approved quality) for new
work : 75 mm dia.
607 405 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes 17.65.1 1 Mtr 40.65
and fittings with two coats of synthetic enamel paint of any colour such as
chocolate grey, or buff etc. over a coat of primer (of approved quality) for new
work : 100 mm dia.
608 6 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast 17.37.1 1 Eacch 167.35
iron/cast iron (spun) pipe embedded in and including cement concrete blocks
10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), including cost of cutting holes and making good the
walls etc. : For 100 mm dia pipe
609 45 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast 17.37.2 1 Eacch 165.05
iron/cast iron (spun) pipe embedded in and including cement concrete blocks
10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), including cost of cutting holes and making good the
walls etc. : For 75 mm dia pipe
610 25 Providing and fixing bend of required degree withh access door, insertion 17.38.1.2 1 Eacch 384.9
rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia sand cast
iron S&S as per 3989.
611 25 Providing and fixing plain bend of required degree. 100 mm dia sand cast iron 17.39.1.2 1 Eacch 334.95
S&S as per 3989.
612 25 Providing and fixing single equal plain junction of required degree with access 17.43.1.2 1 Eacch 623
door, insertion rubber washer 3mm thick, bolts and nuts complete.
100x100x100 mm sand cast iron S&S as per IS 3989
613 10 Providing and fixing single equal plain junction of required degree with access 17.43.2.2 1 Eacch 472.35
door, insertion rubber washer 3mm thick, bolts and nuts complete. 75x75x75
mm sand cast iron S&S as per IS 3989
614 25 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & 17.55.1.2 1 Eacch 512.65
nuts complete : 100 mm dia sand cast iron S&S as per 3989.
615 25 Providing and Fixing collar: - 100 mm dia sand cast iron S&S as per 3989. 17.57.1.1 1 Eacch 187.45
616 15 Providing and Fixing collar: - 75 mm dia sand cast iron S&S as per 3989. 17.57.2.2 1 Eacch 219.15
617 25 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally 17.59.1 1 Eacch 62
cast (spun) iron pipes of diameter : 100 mm dia
618 15 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally 17.59.2 1 Eacch 56.55
cast (spun) iron pipes of diameter : 75 mm dia
619 65 Providing and Fixing floor trap of self cleansing design with screwed down or 17.60.1.1 1 Eacch 1034.45
hinged grating with or without vent arm complete, including cost of cutting and
making good the walls and floors. 100 mm inlet and 100 mm outlet Sand cast
iron S&S as per IS: 3989
620 90 Providing and Fixing G.I. Class "B" pipe complete with G.I. Fittings and angle 18.10.4 1 Metre 308.35
suports, clamps, including cutting and making good the walls etc. 32 mm dia
623 90 Painting of G.I. Pipes and fittings with two coats of anti-corrosive bitumastic 18.40.4 1 Metre 10.85
paint of approved quality. 32 mm dia
626 15 Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete NS 1 Nos. 1650
1:2:4 at all levels for floor drains (exlcuding cost of grating) for connection to
floor traps in sunken portions, complete as per drawings and as per approval
of the engineer-in-charge.(GI Pipe for connecting elbow with floor trap shall be
measured seperatly )
627 65 Providing and fixing G.I. Inlet fitting with maximum 3 inlets 32,40 & 50 mm NS 1 Nos. 1135
size fabricated from 100 mm dia G.I.pipes and welded G.I. sockets as per site
locations, fixed to C.I. Trap and set with proper sealing compound as per
drawing complete as per approval of the engineer-in-charge.
628 25 Providing and fixing cast brass Floor Clean Out plug withh suitable insert keys NS 1 Nos. 1835
for opening, male threaded joint withh G.I. socket drip seal to soil pipe / waste
pipe of C.I. pipe as required complete as per drawing, approved sample and
direction by Engineer-in-charge: 100 mm dia
629 160 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 12.41.2 1 Metre 236.35
to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed
pipes. 110 mm diameter
630 10 Providing and fixing on wall face unplasticised - PVC moulded fittings/ 12.42.2.2 1 Each 94.55
13592 Type A including jointing with seal ring conforming to IS : 5382 leaving
10 mm gap for thermal expansion. Single Push fit coupler 110 mm diameter
631 10 Providing and fixing on wall face unplasticised - PVC moulded fittings/ 12.42.3.2 1 Each 181.55
13592 Type A including jointing with seal ring conforming to IS : 5382 leaving
10 mm gap for thermal expansion. Single Tee with door 110x110x110 mm dia
632 10 Bend 87.5 Deg 110 mm dia 12.42.5.2 1 Each 113.1
633 15 Providing and Fixing on wall face unplasticised - PVC pipe clips of approved 12.43.2 1 Each 181.4
design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm
hard wood plugs, screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1 Cement: 4 Coarse sand)
and making good the walls etc. complete 110 mm dia
634 10 Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 12.44 1 Each 40.9
cm diameter and weighing not less then 440 grams.
635 90 Providing and fixing UPVC rain water pipes of 6 kg./cm2 conforming to IS: NS 1 Mtr 815
4985 including all fittings with or without access door or without access i.e
bends, junctions, cowls, offsets, etc., and jointing with solvent cement and
excavation, refilling and disposal of surplus earth, including cutting holes in
walls and floors, excavation, refilling and disposal of surplus earth wherever
required and making good the same, complete as directed by the Engineer-in-
Charge. 160 mm dia
636 75.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having 18.7.1 1 Metre 142.95
thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer in Charge. Internal work
- Exposed on wall and terrace 15 mm dia
- Exposed on wall and terrace 20mm dia
642 170.00 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having 18.8.1 1 Metre 270
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings including fixing the pipe with suports, clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer-In-Charge. Concealed
work including cutting chases and making good the walls etc.15 mm dia
643 170.00 Concealed work including cutting chases and making good the walls etc. 20 18.8.2 1 Metre 296.4
mm dia
mm dia
mm dia
646 10.00 Providing and fixing brass stop cock of approved quality 15mm nominal bore 18.16.1 1 Each 260.1
647 16.00 Providing and fixing brass stop cock of approved quality 20mm nominal bore 18.16.2 1 Each 280.4
648 23.20 Providing and fixing gun metal gate valve with C.I. wheel of approved quality 18.17.1 1 Each 428.85
(screwed end) : 25mm dia nominal bore
(screwed end) :50mm dia nominal bore
652 250 Excavating trenches of required width for pipes, cables, etc including 2.10.1.1 1 Metre 138.05
excavation for sockets, anddressing of sides, ramming of bottoms, depth up to
1.5 m, including getting out the excavated soil, and then returning the soil as
required, in layers not exceeding 20 cm in depth, including consolidatingeach
deposited layer by ramming, watering, etc. and disposing of surplus excavated
soil as directed,within a lead of 50 m : Pipes, cables etc, not exceeding 80 mm
dia.
653 1100 Excavating trenches of required width for pipes, cables, etc including 2.10.1.2 1 Metre 225.45
soil as directed,within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia
but not exceeding 300 mm dia
654 50 Excavating trenches of required width for pipes, cables, etc including 2.10.1.3 1 Metre 352
soil as directed,within a lead of 50 m : Pipes, cables etc. exceeding 300 mm dia
but not exceeding 600 mm
655 500 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth NS 1 Metre 286.32
exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item
for depth upto 1.5 metre). Pipes, cables etc. exceeding 80 mm dia but not
exceeding 300 mm dia
656 50 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth NS 1 Metre 1108.8
exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item
for depth upto 1.5 metre). Pipes, cables etc. exceeding 300 mm dia but not
exceeding 600 mm
657 30 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 19.2.1 1 Metre 622.95
graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes
including bed concrete as per standard design: 100 mm dia
including bed concrete as per standard design:200 mm dia
660 160 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 19.2.4 1 Metre 1027
661 10 Centering and shuttering including strutting, propping etc. and removal of 4.3.1 1 Sqm 193.95
form for all heights as per architectural drawings and direction of Engineer-
in- Charge complete. Foundations, footings, bases of columns, etc. for mass
concrete
662 15 Providing and fixing square-mouth S.W. gully trap class SP-1 complete withh 19.4.1 1 Each 1602.4
C.I. grating brick masonry chamber withh water tight C.I. cover withh frame o f
300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per standard design: 100x100 mm size P
type withh common burnt clay F.P.S. (non modular) bricks of class designation
7.5
663 20 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1.1 1 Metre 216.25
mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)
including testing of joints etc. complete : 100 mm diameter
including testing of joints etc. complete : 150 mm diameter
including testing of joints etc. complete :200 mm diameter
666 500 Providing and laying non-pressure NP2 class (light duty) R.C.C pipes jointed 19.6.2 1 Metre 355.7
withh stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. Complete 150 mm dia. R.C.C. pipe
669 10 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 19.7.1.1 1 Each 8634.1
coarse sand ) withh R.C.C. top slab withh 1:2:4 mix (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix
(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick withh cement mortar 1:3 (1 cement : 3 coarse
sand) finished withh floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20
mm nominal size) finished withh a floating coat of neat cement complete as per
standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover
withh frame (light duty) 455x610 mm internal dimensions, total weight of cover
and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame
15 kg) : Withh common burnt clay F.P.S. (non-modular ) bricks of class
designation 7.5
670 5 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame 19.7.2.1 1 Each 18422.4
(medium duty) 500 mm internal diameter, total weight of cover and frame to be
not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : Withh
common burnt clay F.P.S. (non-modular ) bricks of class designation 7.5
671 5 Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. 19.8.1.1 1 Metre 5718.6
(non modular) bricks of class
designation 7.5
672 5 Extra for depth for manholes Size 120x90 cm With common burnt clay F.P.S. 19.8.2.1 1 Metre 6850.7
(non modular) bricks of class designation 7.5
673 10 Constructing brick masonry circular type manhole 0.91 m internal dia at 19.9.1.1 1 Each 8684
bottom and 0.56 m dia at top in cement mortar 1:4 ( 1 cement : 4 Coarse
sand ), in side cement plaster 12 mm thick withh cement mortar 1:3 ( 1
cement : 3 coarse sand) finished withh a floating coat of neat cement,
foundation concrete 1:3:6 mix ( 1 Cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making necessary channel in cement
concrete 1:2:4 ( 1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished withh a floating coat of neat cement all complete as per
stander design.
0.91 m deep withh S.F.R.C . cover and frame ( heavy duty, HD-20 grade
designation) 560 mm internal diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182 Kg. fixed in cement concrete 1:2:4
(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering shuttering all complete. (Excavation , foot rests and 12
mm thick cement plaster at the external surface shall be paid for separately)
Withh common burnt clay F.P.S. (non modular) bricks of class designation 7.5
674 5 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 19.10.1 1 Metre 4911.8
0.91 m to 1.67 m Withh common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
675 5 Constructing brick masonry circular manhole 1.22 m internal dia at bottom 19.11.1 1 each 16720.9
and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside
cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat cement foundation concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size) finished with a floating coat of
neat cement, all complete as per standard design :
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
560 mm internal diameter conforming to I.S. 12592, total weight of cover and
frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) including
centering, shuttering all complete. (Excavation, foot rests and 12 mm thick
cement plaster at the external surface shall be paid for separately) : With Sewer
bricks conforming IS : 4885
676 5 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 19.12.2 1 each 6505.15
1.68 m to 2.29 m : With Sewer bricks conforming IS : 4885
677 5 Constructing brick masonry circular manhole 1.52 m internal dia at bottom 19.13.1 1 each 35845.05
and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand)inside
cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat cement, foundation concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size) finished with a floating coat of
neat cement, all complete as per standard design :
2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade
designation) 560 mm internal diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete. (Excavation, foot rests and 12 mm
thick cement plaster at the external surface shall be paid for separately) : With
Sewer bricks conforming IS : 4885
678 5 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 19.14.2 1 15397
2.30 m : With Sewer bricks conforming IS : 4885
679 15 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in 19.27.1 1 Each 4043.1
cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame complete as per standard design : With
common burnt clay F.P.S. (non modular) bricks of class designation 7.5
680 10 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in 19.28.1 1 Each 4384.5
cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical
grating complete as per standard design : With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
681 5 Providing and fixing G.I. pipes complete with G.I. fittings including trenching 18.12.2 1 Metre 186.3
and refilling etc External Works . 20 mm dia
and refilling etc External Works 25 mm dia
685 100 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling
18.12.6etc External
1 Metre
Works 50 mm
342.7
dia
18.12.7etc External
1 Metre
Works 65 mm
451.7
dia
18.12.8etc External
1 Metre
Works 80 mm
576.3
dia
688 5 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of 18.40..2
approved quality
1 On
Metre
External pipes:
7.1 20 mm dia
689 5 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved
18.40.3 quality
1 On
Metre
External pipes:
9.1 25 mm dia
18.40.4 quality
1 On
Metre
External pipes:32
10.85 mm dia
18.40.5 quality
1 On
Metre
External pipes:40
12.35 mm dia
18.40.6 quality
1 On
Metre
External pipes:50
14.8 mm dia
18.40.7 quality
1 On
Metre
External pipes:65
18.25 mm dia
18.40.8 quality
1 On
Metre
External pipes:80
21.2 mm dia
695 5 Providing and filling sand of grading zone V or coarser grade alround the GI 18.41.2 1 Metre 67.7
pipes in external work. 20 mm dia nominal bore
pipes in external work. 25 mm dia nominal bore
pipes in external work.32 mm dia nominal bore
702 1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality 18.17.1a 1 Nos 396.55
703 1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality 18.17.1 1 Nos 428.2
(screwed end) :40mm dia nominal bore
707 5 Providing and fixing G.I. Union heavy class in G.I. Pipe including cutting and 18.46.1 1 Metre 147.75
threading the pipe and making long screws etc. complete (new work) 15 mm
dia
708 5 Providing and fixing G.I. Union heavy class in G.I. Pipe including cutting and 18.46.2 1 Nos. 170.95
threading the pipe and making long screws etc. complete (new work) 20mm dia
nominal bore
nominal bore
nominal bore
nominal bore
dia nominal bore
dia nominal bore
dia nominal bore
715 4 Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement 18.32.1 1 Nos 1195.35
mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box
100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),
i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand :
10 graded stone aggregate 40mm nominal size ) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a
floating coat of neat cement complete as per standard design : With common
burnt clay F.P.S.(non modular) bricks of class designation 7.5
716 2 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement 18.33.1 1 Nos. 6849.6
mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box
100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size ) , i/c necessary excavation,
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate
40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :
3 coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design : With common burnt clay F.P.S.(non
modular) bricks of class designation 7.5
717 2 Providing and fixing C.I double flanged equilibrium float valve with M.S. lever NS-10 1 Nos. 4020
Charge.
718 80 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable 23.1.1.3 1 Metre 518.95
method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/ bore log, including hire
& running charges of all equipments, tools, plants & machineries required for
the job, all complete as per direction of Engineer -in-charge, upto 90 metre
depth below ground level. 400 mm dia
719 80 Supplying, assembling, lowering and fixing in vertical position in bore well, 23.3.3 1 Metre 610.65
unplasticized PVC (Slotted / Plain pipe) medium well casing (CM) pipe of
required dia, conforming to IS: 12818, including required hire and labour
charges, fittings & accessories etc. all complete, for all depths, as per direction
of Engineer -in-charge 200 mm nominal size dia
720 12 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 23.5 1 Cum 921.9
cm, in recharge pit, in the required thickness, for all leads & lifts, all complete
as per direction of Engineer-in-charge.
721 12 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in 23.6 1 Cum 1038.05
the recharge pit, over the existing layer of boulders, in required thickness, for
all leads & lifts, all complete as per direction of Engineer-incharge.
722 12 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 23.7 1 Cum 1038.05
2 mm in recharge pit, in required thickness over gravel layer, for all leads &
lifts, all complete as per direction of Engineer -in-charge.
723 24 Gravel packing in Rainy well construction in accordance with IS: 4097, 23.8 1 Cum 1175.6
including providing gravel fine/ medium/ coarse, in required grading & sizes
as per actual requirement, all complete as per direction of Engineerin- charge.
724 2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of 23.15.3 1 Each 253.95
pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
725 150 Providing orange colour safety foot rest of minimum 6 mm thick plastic 19.16 1 Each 327.9
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786,
having minimum cross section as 23 mmx25 mm and over all minimum length
263 mm and width as 165 mm withh minimum 112 mm space between
protruded legs having 2 mm tread on top surface by ribbing or chequering
besides necessary and adequate anchoring projections on tail length on 138
mm as per standard drawing and suitable to withh stand the bend test and
chemical resistance test as per specifications and having manufacture’s
permanent identification mark to be visible even after fixing, including fixing in
manholes withh 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per
design.
726 100 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required
19.19.4.1
shape and1approved
Kg quality1655.2
Circular shape 560 mm internal dia
727 2 Construction of brick masonry desilting chamber of size 200x100x60cm 1 Each 48000
(effective depth) before rainy well with 75 class designation bricks in cement
mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1
cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside
and outside plastering 12mm thick with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat of neat cement inside and rough
plaster on outside, including fixing of grating , neatly finished complete in all
respects including neccessary excavation, refilling and disposal of surplus
earth, complete as per attached Sketch.
728 1 Design, Engineering, supplying, installation, testing and NS 1 Job 750000

commissioning of Aerobic Sewage Treatment Plant based on MBBR
Technology (Air Diffuser System), with total effluent handling capacity of 70
KLD per day. The raw effluent collection / equalization sump with screen shall
be a part of the STP. The STP shall be designed as water retaining structures in
MS FRP as required by the manufacturer's design.
The Plant shall be complete with a central Electrical Power
and Control panel fully pre/site wired and with all power and control cables to
all pumps and equipment including all instrumentation, water level controllers
and other controls. All the equipment, piping, pumps, blowers and electrical
are to be
housed infron of the MS Tanks in the Basement Area (after fabrication), inlet,
outlet overflow, drain rungs, Laddres Etc.
Nature of Effluent : Domestic sewage from toilet and

kitchen waste etc
The Rates will include MS Tanks all pumps, piping, valves, MBBR &
Tube Settler Media, Blowers, Diffusers, Central Electrical Power and Control
panel with all power and control cables to all pumps and equipment including
all instrumentation, water level controllers and other controls.
BASIC DATA ON INFLUENT RAW WASTE WATER Total
Suspended Solids (TSS) : 250 - 450 mg/lit
BOD5 : 250 - 350 mg/lit
COD : 500 - 700 mg/lit pH
: 6.0 - 8.5
Oil / Grease : upto 50 mg/lit
Inflow time : 20 HRS Peak
factor :3
Temperature : Ambient
TREATED EFFLUENT WATER QUALITY

As stipulated by State Pollution Control Board (PCB), the treated effluent
quality shall be within the following values for various parameters, for both
present and future.
The treated water quality should be fit for Recycling in

Flushing and Landscaping - PH
:7-8
Total Suspended Solids (TSS) : < 10 mg/lit
BOD5 : < 10 mg/lit
COD : < 50 mg/lit
Oil / Grease : < 10 mg/lit Colour
: 5 hazen units Odor :
unobjectionable Taste : agreeable
The STP shall be designed based on the above details and

parameters. The capacities of various tanks and pumps are guidelines to the
vendor. The contractor has to submit detailed calculations of system and
equipment he proposes to install.
The inlet of raw sewage pipe is about 3.00 to 3.50 meter from
ground level. However, the exact Invert level of incoming sewage should
be taken before start of work.
The STP shall consist of following units but not limited to these unit as
may be required by the manufacturer's design to achieve the desired quality
parameters in treated effluent.
ASSOCIATED MS STRUCTRAL WORK
Bar Screen chamber , Oil / Grease removal Chamber Raw sewage Collection
cum Equalization tank for housing
of submersible sewage lifting pumps, Provision for aeration of Tank will be
kept with adequate numbers of coarse air bubble air diffusers to avoid any
smell and sedimentation problems, MBBR Tanks with air diffusion system and
piping complete of
adequate capacity, Secondary settling tank (clarifier) having hopper bottom,
baffle wall, outlet launders with arrangement of lifting sludge from the bottom
complete as required,
Filter Feed Tank with suitable inlet, outlet, drain, overflow
connections etc as required,Sludge thickener cum digestor (Sludge Holding
tank) with provision of inlet, outlet, drain, overflow, supernatant
withdrawl arrangement with provision of air diffusers for aeration, Treated
water storage tank to collect treated water with inlet, outlet, drain, overflow
facility complete.
729 2 Supply, installation, testing and commissioning of following NS 1 Nos 5000

electro mechanical works and equipments - 2 nos. S.S. 304 bar screen having
10 mm opening of suitable
size with suitable lifting arrangements complete as required.
electro mechanical works and equipments - Air diffuser system with Twin type
rotary air blowers capable
of delivering min. 50 cum/hr (each) of free air at 0.5 kg/cm2 driven through
"V" belt or directly coupled through flexible coupling to a TEFC motor of
suitable HP Suitable for 415 +
10% volts, 3 phase, 50 cycles A/C supply fine bubble membrane type
diffusers complete with valves & air distribution grid complete as
required. Qty : 2 nos (1W+1S)
731 1 Supply, installation, testing and commissioning of following NS 1 Lot 20000

electro mechanical works and equipments - Non clog type air dispersion
system capable of handling
desired cfm of air. Air dispersion grid shall be assembled in modular form
so that they can be replaced/ repaired easily from platform at the top. Air
dispersion system shall be provided for raw sewage equilization sump, sludge
holding tank & MBBR Tank.
electro mechanical works and equipments - Non clogging type submersible
raw sewage pumps for
transfer of raw sewage to aeration tank capable of handling solids up to 30-
40 mm, in CI casing and impeller, SS shaft, IP
68, Class F insulation, mechanical seal complete with all accessories, motor
of required capacity, Pressure gauge on delivery line with isolation valve,
level controller (with
wiring) to control the level of sump automatically including bypass line
from pump outlet to outer sewer line as per site with all valves. Flow rate : 3
Cu M / Hr at 10 meter head. Qty : 2 nos (1W+1S)

electro mechanical works and equipments - Non clogging type horizontal
centrifugal Sludge transfer /
disposal / recirculation pumps capable of handling solids upto 8 mm, having
C.I. casing, Bronze impeller, SS shaft, chrome steel shaft sleeve, IP 55,
Class B insulation, mechanical seal complete with all accessories, motor of
required capacity, Pressure gauge on delivery line with isolation cock, level
controller (with wiring) to control the level of sump automatically. Flow
rate : 2 Cu M / Hr at 10 meter head. Qty : 2 nos (1W+1S)

electro mechanical works and equipments -Providing, fixing, testing and
commissioning of 1 nos. filter
press with manual operation mechanism, for drying the organic sludge
from tube settler of 10 nos of 12"x 12" sizes PP/PVC plates. The filter press
should be with filter cloth, handle effluent water tray, sludge disposal tray
complete in all
respects.
735 2 Providing, fixing, testing and commissioning of single stage, NS 1 Nos 35000
horizontal, centrifugal, 2 pole, 50 HZ, AC, monoblock pumps (as per IS
: 9079) incorporating C.I. casing and frame, stainless steel shaft, bronze
impeller, TEFC induction motor directly coupled to the pump, IP44
protection, class B
insulated, C.I. body, hydraulically and dynamically balanced to give vibration
free operation, with mechanical seal arrangement, fixed on a base plate with
suitable vibration eleminator pads complete with PCC foundation, bolts
grouted in CC blocks of 1:2:4, suitably rated DOL / star-delta starter fixed
inside main electrical panel complete with level controller, necessary
wiring, pressure gauge on the delivery side and strainer on suction side,
including non-return valve and isolating valves on suction and delivering sides
as required, including suction and delivery headers complete in all respects. (i)
Filter Feed Pumps - 2 nos (1W+1S), having discharge :
3000 Ltr/hr (each) at 35 meter head
736 2 (ii) Treated Water Transfer Pumps to irrigation network - 2 NS 1 Nos 35000
nos (1W+1S), having discharge : 4000 Ltrt/hr (each) at 35 meter head
737 2 Plant room drainage sump with 2 nos submersible NS 1 Nos 45000
dewatering pumps having 3 m3/hr discharge at 12 meter head in CI / PP
casing and impeller, SS shaft, 12 mm max particle size, 50 Hz, 400 volts,
IP68, F class insulation to lift plant room waste water into the outer MH or as
directed with float valve / level controller, piping, valves, nrv etc complete.
738 1 Supply, installation, testing & commissioning of Random NS 1 Lot 80000
Media for attached growth process (MBBR Technology) MOC = PP,
Specific Gravity = 0.93 - 0.95, Surface Area = 400 sq.mtr / cum.mtr.
739 1 Supply, installation, testing and commissioning of PVC tube NS 1 Lot 35000
deck settling media to be installed in secondary settling tank
740 1 Supply, installation & testing and commissioning of vertical NS 1 Set 70000
floor mounted mild steel Epoxy pressure type Multi Grade
filter of suitable size for required flow and head, provided with an inlet
distributor. The vessel is painted externally and internally with epoxy paint
with primer with frontal piping & valves, back wash system & filter media etc.
complete with standard fittings like cover, pressure gauge at inlet & outlet,
sampling cock, rinse drain valve, air vent valve with piping, bolts, nuts &
rubber gaskets, Flow rate = 4 M3 / hr at 20 hrs. operation, Vessel Dia = 500
mm, Filteration rate = 16 M3/M2/Hr, Shell / Dish thickness = 6 / 8 mm,
Working pressure = 3.5 Kg/Sq.cm, Test pressure = 5.5 Kg/Sq.cm.
741 1 Supply, installation & testing and commissioning of vertical NS 1 Set 80000
floor mounted mild steel Epoxy pressure type Activated
carbon filter of suitable size for required flow and head, provided with an
inlet distributor. The vessel is painted externally and internally with epoxy
paint with primer with frontal piping & valves, back wash system & filter
media etc. complete with standard fittings like cover, pressure gauge at inlet &
outlet, sampling cock, rinse drain valve, air vent valve with piping, bolts, nuts
& rubber gaskets, Flow rate = 4M3 / hr at 20 hrs. operation, Vessel Dia =
mm, Filteration rate = 15 M3/M2/Hr, Shell / Dish thickness = 6 / 8 mm,
Working pressure = 3.5 Kg/Sq.cm, Test pressure = 5.5 Kg/Sq.cm.
742 1 Supply, installation, testing & commissioning of Ultravoilet Dis Infection Unit. NS 1 Set 70000
The Unit shall have over 99.9% bacterial reduction from inlet to outlet. The
disinfection chamber shall be constructed of SS 316 L on all welted parts. The
UV LAMP shall be of low pressure mercury vapour type with hard glass
enclosure. The sockets shall be water tight & vibration resistant. The Lamp life
shall be rated for 6000 hours. The unit shall be complete with temperature
safety control, lamp out alert circuit & UV radiometer with 4-20 ma output The
UV doses should be >60,000 Uw-Sec/sq.cm. The lamp should be selected
based upon the flow requirement of respective Unit.
The UV unit shall have with reactor cabinet housing, cabinet cooling,
treatment chamber, electrical panel, temperature safety control, lampout alert,
UV radiometer along with UV Monitoring system.
743 1 Providing and fixing all piping (as described below) and NS 1 Lot 190000
isolation control Ball / butterfly valves of required sizes and numbers with all
accessories, fittings, supports, clamps, double flanged flexicon rubber
expansion joint with rubber gasket as per system pressure, nuts, bolts,
washers, puddle
flanges for all tanks, other flanges, NRV's, flow control valves, flow
measurement device, SS 304 screen strainers at suction of clear water pumps,
level sensors for automatic operation of all kind of pumps with necessary
control wiring upto the control panel, for making the system complete in all
respects with anti corrosive protection. CPVC Piping for Submerged Piping MS
(Class 'B') : All non submerged piping
744 1 Supply Installation, testing & commissioning of Electrical NS 1 Lot 140000

Control Panel suitable for 415 V, 3 Phase, 4 wies, 50Hz, fabricated out of 16
SWG CRCA sheet steel, IP52, wall / floor
mounting type. The sheet steel shall undergo minimum seven tank treatment
followed by finishing powder coating of min 60 micron thickness. The board
includes removable gland plates, cable glands, including connection with
outgoing feeders complete in all respect. The outgoings from the panel shall
be suitable for all equipments, various pumps, blowers with suitable capacity
star delta / DOL starters, plant lighting, ventillation, treated water transfer
pumps to horticulture and flushing system etc. Adequate size cable alley
shall be provided for each cable bending & termination. (Panel Make :
Advance / Adlec / Ambit / Tricolite / Milestone / Vidyut control, Swithgear &
accessories make : ABB / Schnieder / L&T / Seimens)
The incoming MCCB's shall be Four pole thermomagnetic
type. All outgoing MCCB's shall be Three pole thermomagnetic type and
all outgoing MCB's shall be C type with 10 KA breaking capacity. The MCCB's
shall be of min Ics
= 25 KA breaking capacity, Ics = 100% Icu, with rotary handle
& pad locking arrangement, with trip setting as per load requirement. TP
MCCB shall be provided with solid isolable neutral link. Cyclic timers will be
provided for Air Blowers Only for
alternate working of stand by Blower.. The control panel will also include
plant room Dewatering
Sump Pump Controls With Magnetic Water Level Controllers (For three Phase
Three Pumps) To Operate Pumps Alternatively And In Case Of Excess inflow
into the Sump, all three Pumps Will Start Automatically With Audio, Visual
&
Alarm Including All Standard Accessories Complete In All
Respect. The board includes suitable capacity, 500 Volts, 3 phase 50
HZ TPN high conductivity electrolytic Aluminium bus bar of suitable length,
insulated by heat shrinkable sleeves. The
current density of bus bar shall not exceed 1 amp/sqmm.
The above board shall be complete with 3 nos. phase

indicating lights, flush mounted Ammeter, Voltmeter, CT's,
PT's, selector switches, protective fuses etc. at Incomer with all inter
connections by min. 2.5 sq.mm. Copper wires. The following pumps shall be
controlled by the Panel. (a) Raw Sewage Pumps - 2 Nos. (b) Air Blowers - 2 Nos.
(c) Sludge Disposal Pumps - 2 Nos. (d) Screw Pumps - 1 Nos. (e) Filter Feed
Pumps - 2 Nos. (f) Dewatering Pumps - 2 Nos. (g) UV System - 1 Nos.
745 1 Supply, Transportation, installation, testing and commissioning of 2.00HP Elec-5.4.59 1 Set 50220
Three phase ISI self priming Mono block IP44 motor pumpset (40x40mm).
Makes: Kirloskar / Crompton / Texmo / CRI / KSB. No. of Pumps : 2 (1W +
1S), Capacity :170 LPM of Each Pump, Head : 25 M Note:-1 set consists of 2
nos. of pumps (1Working + 1Standby)
746 1 Supply, Transportation installatiion testing and commissioning of 3.00HP Elec-5.4.61 1 Set 62 270
Three phase ISI self priming Mono block IP44 motor pumpset (50x50mm).
Makes: Kirloskar / Crompton / Texmo / CRI / KSB.
Dom. water transfer pumps
No. of Pumps : 2 (1 Working + 1 Stand by)
Capacity : app. 170 LPM each
Head : 45 M
(complete set as mentioned above)
747 1 Flushing water transfer pumps Elec-5.4.61 1 Set 62 270
No. of Pumps : 2 (1 Working + 1 Stand by)
Capacity : app. 170 LPM each
Head : 45 M
748 2 Water Trasfer hydro Pump Supply Of Vertical Multistage Pump With (One VFD, Elec-5.4.61 1 Set 2 20 620
PLC & HMI) Based Control Panel, 100Ltrs Of Pressure Tank, Header & Footer,
BFV's, NRV's Type: HPNLCR 5-07, MOC: Head & Base-CI, Casing, Impeller,
Shaft-SS304 Rated Flow: 100LPM, Rated Head: 30Mtrs Suction X Discharge:
DN50 X DN50 Motor: 1.50HP, 2900RPM, 3-Phase, 50Hz
Duty of each pump suitable for:-
No. of Pumps : 2 nos. (1 W + 1 S)
Capacity : 100 LPM of Each Pump
Head : 30 Meters
Air Vessel : 1 Nos of Min. 100 Liters Cap.
Note:-1 set consists of 2 nos. of pumps (1 Working + 1Standby)
749 1 Providing and fixing vertical Pressure Sand Filter (comprising of minimum NS 1 Each 82 400
750mm media in four graded layer and minimum Height on Straight 1500mm)
fabricated from high performance M.S plate of minimum 10mm thick for shell
& 12mm thick for dished ends,(Quality of Steel as per IS:2062 Grade B,
thickness as per ASME Section 8),Tested to 5.0 Kg/m2 , internally treated with
coal-tar epoxy, air scouring, collection system initial charge of media, M.S face
piping with necessary flanges, gaskets, isolating valves, accessories, nuts &
bolts, external painting with 2 coats of red oxide primer and enamel paint etc.
with suitable foundation boits & other accessories, mounting frame, complete
as required & as specified as per directions of the engineer-in-charge. with the
following: Discharge : 10 m3/Hour Each
Filtration Rate : 17500 lit./m2/h
Suggested dia app. : 1 m
750 1 Providing and fixing ‘Cation’ ION exchange water softener fabricated from NS 1 Each 212070
minimum 8 mm thick M.S. plate on min. shell and 10 mm thick M.S. plate on
dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME
Section 8) complete with initial charge of filter media and ION exchange resins,
face piping accessories, diaphragm valves of approved specifications, HDPE
Brine tank of min. 500 Liters, piping testing and commissioning complete with
resins of approved quality and make and regeneration assembly complete with
valves, ejector, brine suction valves and piping. (Bidder must indicate type and
quantity of resin used and quantity of salt required per regeneration). All
internal parts of the softener shall be rubber lined as per approved
specifications.
Minimum expected rate of flow: App. 8000 lph
Total soft water to be produced between two regenerations: app. 64 Cum
Expected raw water hardness : app. 450-500 ppm
Expected treated water hardness: less than 5 ppm (Zero Commercial Hardness)
Max. working pressure : 4 Kg/cm2
751 1 Providing and fixing Salt Saturator assembly (for supply of salt solution) NS 1 Set 35290
consisting of HDPE/PVC tanks with automatic agitators and all required
accessories for holding and supplying salt for softener complete in all respects,
including providing and fixing vertical, inline multistage centrifugal pumping
set with stainless steel SS-316 L stage casing and SS-316 L impellers with
stainless steel shaft and suction & discharge casing . The effective capacity of
the system to be of minimum 10% greater than actual salt required for approx.
3 Days with complete structural arrangement including RCC foundation etc. as
per instructions of engineer-in-charge and approved fabrication shop drawings.
(i) Recommended no. of tanks = 1 Nos.
(ii) Total Capacity of each Tank = 5 000 Liters
752 1 Providing and fixing chemical dozing system consisting of 2 nos. electronic NS 1 Set 29380
dosing pumps (1W+1S) of approved make with all accessories, suitable to
doze chemical solution upto 1 ppm doze (of Sodium Hypo-chloride solution) to
a filtered water flow of 15,000 lph. against a pressure of 1.5 kg/cm2
complete with FRP moulded solution holding tank of min. 200 litre with all
standard accessories & structural arrangement including suitable foundation
bolts & other accessories etc.complete as required and as specified. Note:1 set
consists of 2 nos. of pumps(1W+1S)
753 1 Providing and fixing compact monoblock dry motor submersible pumps of NS 1 Set 145900
suitable rating, with non-clog free flow open impeller, solid handling capacity of
upto at least 28mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz,
A.C supply, speed 2900 RPM including oil chamber, guide wire for lifting &
lowering of pump, M.S. galvanized lifting chain, complete. The pump sets
shall be supplied with required accessories & as per specification with the
following :
(a) Complete piping 80 mm dia common delivery upto 7.5 m in heavy Duty
Class 'C' G.I. -- 1 Set
(b) 65mm dia Butterfly valve.-- 2 Nos
(c) 65 mm dia Flap type Non-return valve.-- 2 Nos
(d) Necessary cables from pump set to control panel (position of panel marked
on enclosed drawings).- 1 Set
(e) Electrical control panel having all necessary accessories & safety devices of
standard specifications and suitable for receiving incommer cable from main
plumbing panel to conncet sump pump panel complete as required. (Panels
with sump pumps near each sump as per site conditions). --1 No.
Each set consist of 2 nos.of pumps - 1 working & 1 stand by (Complete set as
above with 2 nos. pumps including cost for valves, piping, Control Panel and
Cabling, Level Controllers etc as required and as specified)
Discharge - 250 LPM Each
Total head - 10-15 Meters (minimum)
754 10 Provding and fixing heavy duty G.I. pipe (For Suction & Delivery of pumps and NS 1 Metre 695
equipment) confiming to IS. 1239 upto 150 mm and IS 3589 for dia 200 mm
and above with reducers, tees, flanges, elbow, crosses, union etc. and fixing
the pipes on wall / ceiling / beam / floor including Clamping/Supporting the
same, including painting with 2 coats of synthetic enamel paint as per the site
requirement and shall be duly painted with two coats of approved quality
synthetic enamel paint & shade over a readymix primer coat complete as
required & as per directions of the engineer-in-charge for the size: 40mm dia
755 10 Provding and fixing heavy duty G.I. pipe (For Suction & Delivery of pumps and NS 1 Metre 930
756 10 Provding and fixing heavy duty G.I. pipe (For Suction & Delivery of pumps and NS 1 Metre 1 130
759 2 Supplying, installing, testing and commissioning approved make CI body Foot ELEC- 1 Each 7 450
Valve with brass strainer with necessary flanges, nuts and bolts etc., complete 9.5.77
Engineers.
Makes:Normex & approved makes 100mm dia
760 2 Supplying, installing, testing and commissioning approved make CI body Foot ELEC- 1 Each 5 100
Valve with brass strainer with necessary flanges, nuts and bolts etc., complete 9.5.78
Engineers. 80mm dia
761 4 Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves ELEC- 1 Each 3 067
conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED 9.5.52
and taxes etc., complete. Operation done with worm actuator ISI marked Rate
at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto
/ Intervalve. 50mm dia
764 2 Providing, installation, testing and commissioning of dual plate non - return ELEC- 1 Each 1 723
valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI 9.5.45
50 mm nominal bore
80 mm dia
100 mm dia
767 250 Providing and fixing M.S. grating and preferably in 600mm long pieces, NS 1 Kg. 260
fabricated with 16x16mm square bars, @ 20mm clear spacing and welded to
angle iron 25x25x5mm and placed firmly on angle iron frame of 30x30x5mm
with 25x3mm hold fasts approximately 75mm long welded at intervals of
500mm including two or more coats of synthetic enamel paint of approved
quality and shade over one coats of primer and set in cement mortar 1:3 (1
cement : 3 coarse sand) complete as per attached details for drain.
Total
(Package – 2)
Rate
Amount
Word
Rupees three 141444.00

thousand nine
hundred and twenty
nine only
Rupees four 34085.00

thousand and ten
only
Rupees six hundred 130852.80

and ninety nine only
and fifty seven only

thousand nine
hundred and fifty
four only
Rupees one hundred 78035.64

and ninety seven
only
Rupees two hundred 146308.50

and forty six only

and thirty one only
Rupees eighty nine 95893.05
only

and thirty six only
Rupees nine 156852.03

hundred and sixty
nine only

hundred twenty two
and thirty paise only
Rupees seven 24062.26
thousand five
hundred seventeen
and twenty paise
only
thousand three
hundred fifty one
and ninety five paise
only

forty five and
seventy paise only
sixty six and twenty
five paise only
Rupees four 9414.90
hundred twenty
seven and ninety
five paise only
Rupees six thousand 17474.69
six hundred forty
seven and thirty five
paise only

hundred eighty eight
and forty paise only
Rupees eighty eight 4757.40

and ten paise only
Rupees sixty four 257.20

Rupees fifty one and 204.40

ten paise only
Rupees thirty eight 1026.00
only

thousand two
hundred and fifty
and fifty one paise
only
New item
eighty eight and
thirty five paise only

forty eight and
seventy five paise
only New item
Rupees sixty six 264.40
and ten paise only
New item
and forty five paise
only New item
hundred eighty four
and fifty paise only
Rupees four hundre 231348.00
forty four and ninety
paise only
Rupees eight 26136.66

hundred sixty six
and sixty paise only

hundred forty one
Rupees one 7379.03

thousand three and
ninety five paise
only
Rupees one 13846.80
thousand one
hundred fifty three
and ninety paise
only
Rupees sixty two 11828.03
only

hundred and fifty
nine only
Rupees fifty five and 55.50
fifty paise only
Rupees sixty eight 1366.00

hundred thirty eight
and twenty five
paise only

thousand nine
hundred forty one
Rupees thirty two 550477.00
thousand three
hundred and eighty
one only
Rupees two 238960.00
thousand only

hundred only

thousand and five
hundred only

hundred and thirty
only
Rupee three 5670.00

hundred and fifteen
only
hundre only
Rupees five 540000.00

thousand only

thousand only

thousand and five
hundred only
1751053.22
30000.00
20000.00
8661742.10
0.00
Rupees seventy two 360000.00
thousand only
Rupees thirty four 136000.00

thousand only
Rupees seventy five 225000.00

thousand only
Rupees twenty eight 84000.00
thousand only
Rupees ninety four 188000.00

thousand only

and nine hundred
only
Rupees fourteen 490000.00
thousand only
Rupees ninety eight 196000.00

only
Rupees two lakhs 750000.00

and fifty thousand
only

thousand only
and eighty only

and eighty only
Rupees twenty two 132000.00

thousand only

hundred only
Rupee seven 80500.00
hundred only
3189600.00
Rupee forty six 647612.00
thousand two
hundred and fifty
eight only
Rupees fifty 100032.00
thousand and
sixteen only
Rupees one 24000.00

thousand and five
hundred only
Rupees two 33600.00
thousand and one
hundred only
Rupees one 285000.00
thousand only

thousand two
hundred and twenty
seven only
and twenty five only

hundred and eighty
six only
hundred and eighty
two only
3067594.00
Rupees twelve 1935450
thousand seven
hundred and fifty
only
Rupees thirteen 1588125.00
thousand seven
hundred and fifty
only

thousand and two
hundred only
Rupees two 72800.00
thousand and eighty
only
Rupees twelve 125000.00

thousand and five
hundred only
Rupees one lakhs 395000

ninety seven
thousand and five
hundred only
Rupees one lakhs 250000.00
and twenty five
thousand only
Rupees ten 51250.00

thousand two
hundred and fifty
only

thousand six
and seventy six
paise only
Rupees two laksh 832000.00
and eight thousand
only
Rupees one lakh 377000.00

eighty eight
thousand and five
hundred only
Rupees three lakhs 640250.00

twenty thousand
one hundred and
twenty five only
Rupees seventeen 51260.10
thousand eighty six
and seventy paise
only
Rupees fifteen 45229.50

thousand seventy
six and fifty paise
only
Rupees thirtee 169000

thousand only
Rupees twenty four 196894.72
thousand six
hundred eleven and
eighty four paise
only

thousand five
hundred ninety five
and three paise only
Rupees eighteen 183425.00

thousand three
hundred forty two
thirty six thousand
three hundred and
eighty nine only
Rupees sixty seven 469301.00

thousand and forty
three only
thousand nine
hundred sixty four
and thirty four paise
only

thousand nine
hundred seventy
three and eighty
four paise only
Rupees thirty one 93750.00

thousand two
hundred and fifty
only
Rupees ninteen 76387.60

thousand ninety six
and ninety paise
only
Rupees thirty three 298514.70
one hundred sixty
eight and thirty
paise only
90460.00
Rupees twenty seven 249741.36

thousand seven
hundred forty nine
and four paise only

thousand seven
hundred forty and
ninety eight paise
only
Rupees ten 124800.00
thousand and four
hundred only

thousand seven
hundred sixty four
and twenty two
paise only
thousand four
hundred eighty four
and sixty six paise
only
Rupees sixteen 32533.50

thousand two
hundred sixty six
and seventy five
paise only

thousand and five
hundred only
thousand and five
hundred only
Rupees eighty seven 522123.00

thousand twenty
and fifty five paise
only
Rupees thirty 180000.00

thousand only
thousand nine
hundred and eighty
four only
Rupees five lakhs 1511013.00
three thousand six
hundred and
seventy one only

thousand eight
hundred and sixteen
only
Rupees forty five 315000.00

thousand only

twenty eight
thousand nine
hundred and sixty
five only
and eighty five
thousand only
and fifty thousand
only
Rupees five laksh 1000000.00
only
Rupees six lakhs 600000.00
only
sixty four thousand
four hundred and
six only
eighty eight
thousand one
hundred and five
only
forty one and sixty
seven paise only
Rupees seventy 70000.00
seven and seventy
eight paise only
twelve and fifty paise
only
twenty three and
twelve paise only
Rupees four lakhs 400000.00
only
Rupees three laksh 352000.00
and fifty two
thousand only
thousand only
thousand only
Rupees five lakhs 500000.00
only
Rupees ten laksh 1032880.00
thirty two thousand
eight hundred and
eighty only
Rupees four lakhs 452000.00
and fifty two
thousand only
Rupees thirty five 7185490.00
laksh ninety two
thousand seven
hundred and forty
five only
Rupees fifty four 5440500.00
lakhs forty thousand
and five hundred
only
33320306.10
and ninety thousand
only
Rupees six lakhs 678000.00
and seventy eight
thousand only

thousand and eight
hundred and sixty
only
thousand four
hundred and fifty
only

thousand and eighty
only

thousand one
hundred and twenty
five only

one hundred and
forty only
Rupees two 35420.00

thousand five
hundred and thirty
only
thousand and five
hundred only

thousand two
hundred and fifty
only

thosuand eight
hundred and thirty
two only

hundred and ninety
only
Rupees nine 9500.00
thousand and five
hundred only

thousand three
hundred and
seventy five only
thousand and five
hundred only
Rupees nine 9100.00
thousand and one
hundred only
and nine hundred
only
thousand two
hundred and ten
only

thousand and four
hundred only
Rupees one 22725.00

thousand five
hundred and fifteen
only
Rupees one 50000.00

thousand only

hundred fifty only

only
Rupees five hundred 23040.00

and twelve only
hundred only

hundred only

only
Rupees thirty only 300.00
Rupees eleven 23698.00

thousand eight
hundred and forty
nine only

thousand six
hundred and thirty
one only

thousand and eighty
eight only

thousand eight
hundred and twelve
only

thousand and sixty
seven only
thousand only

thousand seven
hundred and twenty
five only

thousand five
hundred only

thousand six
hundred and thirty
three only
Rupees one 7500.00
thousand two
hundred and fifty
only
thousand four
hundred and thirty
six only
six hundred and
forty four only
thousand eight
hundred and fifty
two only
thousand two
hundred and twenty
eight only
thousand three
hundred and sixteen
only
seventy five only
Rupees two 15000.00

thousand and five
hundred only
Rupees ninety nine 99263.00
thousand two
hundred and sixty
three only

thousand two
hundred and eighty
only

hundred and forty
six only
Rupees one 18120.00
thousand two
hundred and eight
only
Rupees one 21750.00

thousand four
hundred and fifty
only
thousand one
hundred and eighty
only

thousand nine
hundred and sixty
one only

thousand and one
hundred only
Rupees one lakh five 105857
thousand eight
hundred and fifty
seven only
thirty five thousand
four hundred and
ninety seven only
thousand and eighty
one only
Rupees ninety three 93154.00
thousand one
hundred and fifty
four only
thousand seven
hundred and three
only
thousand four
hundred and sixty
nine only
five hundred and
twenty one only
thousand six
hundred and twenty
two only
seven hundred and
seventy five only
thousand eight
hundred and twenty
only
thousand three
hundred and eighty
seven only
Rupees ninety three 93154.00
thousand one
hundred and fifty
four only
three hundred and
fifty one only
three hundred and
fifty one only
thousand two
hundred sixty only
thousand six
hundred and twenty
two only
and sixty nine only
ninteen thousand
nine hundred and
seventy one only
6539102.00
thousand and ninety
four only
Rupees one 17504.00

thousand and ninety
four only

and thirty nine only

hundred and sixty
six only

and six only
hundred and twenty
four only
and eigteen only

and fifty three only

hundred and thirty
only
and fourteen only

hundred and
ninteen only
Rupees twenty four 1200.00
only
hundred and
thirteen only
hundred and six
only

hundred and ninety
nine only
Rupees forty six only 1518.00
Rupees ninety only 2970.00
Rupees sixty one 305.00

only
and thirty two only

and twenty four only
only
hundred and fifty six
only
and five hundred
only
and one only
Rupees one 22788.00
thousand eight
hundred and ninety
nine only
thousand and three
hundred only
Rupees two 32400.00
thousand and seven
hundred only
thousand and three
hundred only
and ninety only
Rupees nine 4625.00
hundred and twenty
five only
Rupee one thousand 6500.00
and three hundred
only
Rupees seven only 350.00

and forty nine only

and sixty three only

and seventy two only
Rupee five hundred 11830.00
ninety one and fifty
paise only
Ruees five hundred 101500.00

seven and fifty paise
oly

hundred and eighty
eight only

hundred and eighty
five only

hundred and sixty
only
16560.00
hundred forty only
Rupees four 6450.00
hundred and thirty
only
hundred and thirty
only
only

and thirty two only

and twenty four only

only
Rupees one 38640
thousand six
hundred and eighty
only

thousand seven
hundred and twenty
two only
Rupees one 61920.00

thousand five
hundred and forty
eight only
and seventy eight
only
hundred ninety six
only
thousand six
hundred and forty
five only
thousand six
hundred and ninety
four only
thousand one
hundred and eighty
eight only
thousand eight
hundred and
seventy only
Rupees one 33750.00
thousand three
hundred and fifty
only
thousand two
hundred and twenty
only
hundred and
seventy five only
Rupees twelve lakhs 1236238.00
thrity six thousand
and two hundred
thirty eight only

thousand and five
hundred only
fifteen thousand and
two hundred only
thousand and two
hundred only

thousand only
thousand and six
hundred only
Rupees four 410.00
hundred and ten
only
hundred and four
only
Rupees fifty seven 570.00
only

only
only
three only

and twelve only
Rupees ten and ten 15150.00
paise only
Rupees twenty five 38700.00
and eighty paise
only
hundred and forty
only
Rupes five thousand 15600.00
and two hundred
only
and twenty only
only
and five hundred
only
Rupees forty only 4000.00

and fifty only
Rupee four 9400.00
thousand and seven
hundred only
Rupees five 5580.00
thousand five
hundred and eighty
only
and five only
thousand and five
hundred only
Rupees nine 9500.00
thousand and five
hundred only
Rupes two thousand 2000.00
only
Rupees three 350.00
hundred and fifty
only
Rupees twenty nine 4350.00
only

only
Rupees ninety eight 980.00
only
Rupees sixty only 7500.00
Rupee sixty nine 220800.00

only
Rupees seven lakhs 750300.00
fifty thousand and
three hundred only

sixty seven thousad
five hundred and
ninety seven only
thosuand nine
hundred and eighty
eight only
thousand six
hundred and fifty
nine only
Rupees ten 10663.00
thousand six
hundred and sixty
three only
Rupees two 92970.00
thousand and sixty
six only
thousand only
Rupees ninteen 152008.00
thousand and one
only

thousand only
Rupees one 78000.00

thousand and five
hundred only
thousand five
hundred and fifty
only
and twenty five
thousand only
Rupees thirty four 102327.00

thousand one
hundred and nine
only
thousand only
Rupees thirty seven 185000.00

only

and forty seven only
Rupees sixty nine 69000.00
only
Rupees ninteen only 47500.00
Rupees fifty three 267650.00

thousand five
hundred and thirty
only

thousand four
hundred and eighty
one only
0.00

seventy four
thousand five
hundred and eighty
two only

thousand eight
hundred and thirty
four only
thirty four thousand
five hundred and
seventeen only

hundred and forty
eight only
Rupees two 20190.00
thousand and
ninteen only
Rupees one 17400.00
thousand seven
hundred and forty
only
thousand nine
hundred and
seventeen only
Rupees two 22970.00
thousand two
hundred and ninety
seven only
and seventy seven
only
and four only
Rupees two 20190.00
thousand and
ninteen only
Rupees one 17400.00
thousand seven
hundred and forty
only
fifteen thousand two
hundred and ninety
four only

eighty eight
thousand and one
hundred only
Rupees one lakh one 101080.00

thousand and eighty
only

thousand one
hundred and thirty
only
thousand three
hundred and twenty
five only
thousand one
hundred and thirty
only
Rupees four 9120.00
thousand five
hundred and sixty
only
thousand five
hundred and fifty
eight only
thousand six
hundred fifty five
only
thousand six
hundred fifty five
only
thousand and eight
hundred only
only

only
Rupees ninety seven 19400.00

only

forty seven only

eighty seven
thousand six
hundred and fifty
nine only
Rupees on lakh 137132.00
thirty seven
thousand one
hundred and thirty
two only
nine thousand two
hundred and eighty
eight

thousand four
hundred and three
only
thousand four
hundred and eleven
only
thousand seven
hundred and forty
only
Rupees two 9188.00

thousand two
hundred and ninety
seven only

and eighty paise
only
lakhs fifty nine
thousand seven
hundred and fifty
only
Rupees sixteen 1671024

lakhs seventy one
thousand and
twenty four only
twenty four only
Rupees sixty 120314.00
thousand one
hundred and fifty
seven only
Rupees ten lakhs 2147730.00
seventy three
thousand eight
hundred and sixty
five only
Rupees ten lakhs 3104457.00

thirty four thousand
eight hundred and
ninteen only

thousand only
Rupees twenty lakhs 2050683
fifty thousand six
hundred and eighty
three only
Rupees six lakhs 630078
thirty thousand
and seventy eight
only
Rupees two lakhs 500348

fifty thousand one
hundred and
seventy four only
Rupees one lakh two 102326
thousand three
hundred and twenty
six only
Rupees one lakh 108270
eight thousand two
hundred and
seventy only
Rupees eighty two 82267

thousand two
hundred and sixty
seven only

twenty four
thousand nine
hundred and
thirteen only
hundred and
thirteen only

seventy eight
thousand four
hundred and six
only
thousand four
hundred and
seventy three only
Rupees sixty two 62207

thousand two
hundred and seven
only
Rupees sixty two 62207
thousand two
hundred and seven
only

thousand four
hundred and thirty
three only
Rupeees three 135864.00

thousand six
hundred and
seventy two only
thousand three
hundred and twenty
seven only
thousand two
hundred and eighty
nine only
only

hundred and
seventy two only
hundred and fifty
one only
and thirty four only

and ninety eight
only
and twenty nine
only
only
and six only

and fourteen only

and twenty three
only

and forty eight only

and forty one only
and forty nine only

fifty eight only

only

only

only

only

only
Rupees twenty one 2100.00

only
and sixty nine only
Rupees sixty five 19500.00

only
Rupees ninety two 1840.00

only
and eight only
and thirty only
and sixty two only
and seven only
hundred and twenty
six only
and thirty seven
only
hundred and sixty
two only
hundred and six
only
thousand and
twenty three only
thousand four
hundred and forty
nine only
thousand four
hundred and
seventy five only
hundred and twenty
seven only
Rupees four 7856.00
hundred and ninety
one only
and seventy eight
only
only
and thirty eight only
and sixty four only
Rupees sixty only 70680.00

only
only
Rupees twenty only 40.00

only
Rupees forty only 160.00
Rupees forty six only 552.00
Rupees seventy one 1136.00

only

only
Rupees ten 64614.00

thousand seven
hundred and sixty
nine only
thousand six
hundred and twenty
six only

thousand three
hundred and
seventy only
thousand only

thousand and five
hundred only

thousand three
hundred and twenty
nine only

thousand three
hundred and
seventy one only

thousand six
hundred and four
only
thousand nine
hundred and fifty
only
three thousand
three hundred and
fifty four only

thousand seven
hundred and ninety
four only
Rupees twenty six 2606175

lakhs six thousand
one hundred and
seventy five only
91500
550000
65857223.08
13870.59
Rupee one hundred 23942.28
and forteen only
and sixty six only


thousand nine
hundred and fifty
four only

and seventy four
only

and ninety seven
only
and forty six only

only

hundred fifty and

thousand five
hundred eighty two
and eighty five paise
only
Rupees one 14760.00
thousand eight
hundred and forty
five only
Rupees three 388.40


eighty nine and
twenty paise only
and ten paise only

ten paise only

only
Rupees two 13132.29

thousand three
hundred sixteen and
ten paise only

hundred thirteen
fifty five and twenty
five paise only
Rupees one 9033.18

thousand one
hundred fifty eight
and ten paise only
Rupees one 4556.58
thousand two
and twenty paise
only
Rupees eighty four 2081.37
only
Rupees eighteen and 218.68
ninety five paise
only
eighty eight and


eighty seven and
sixty paise only
Rupees sixty six and 132.90

forty five paise only

forty three and
eighty paise only
hundred twenty
seven and ninety
paise only
hundred eighty four
Rupees four hundre 20910.30

forty four and ninety
paise only

hundred sixty six
Rupees one 7780.61

thousand three and
ninety five paise
only
only
Rupees three 359.00

hundred and fifty
nine only
fifty paise only

Rupees one 47283.51
thousand thirty four
and sixty five only
Rupees two 6000.00

thousand only
680069.60
and ninety nine only
thousand eight
hundred and sixteen
only


and ninety seven
only

and forty six only

and thirty one only
only

and thirty six only

hundred fifty and
Rupees thirty nine 2158.35

and twenty paise
only

twelve and forty five
paise only
and ten paise only


ten paise only

only
Rupees two 75041.64
thousand three
hundred sixteen and
ten paise only

hundred sixty two

hundred nine and
seventy paise only

thousand five
hundred eighty nine
Rupees one 19925.32
thousand one
hundred ninteen
Rupees one 2315.81

thousand one
hundred thirty five
and twenty paise
only
hundred eighty four

hundred forty four
and ninety paise
only

hundred sixty six
1219280.76
and fifteen only
thousand and eighty
four only

thousand one
hundred and thirty
six only

thousand eight
hundred and sixteen
only
thousand eight
hundred and forty
seven only


and sixty four only

and seventy one
only
thousand nine
hundred and fifty
four only

and ninety seven
only

and forty six only

and thirty one only
hundred and sixty
nine only

hundred fifty and

hundred twenty two
thousand five
hundred eighty two
only
and twenty paise
only
thousand three
hundred fifty one
only

forty five and
seventy paise only
five paise only
Rupees four 6419.25
hundred twenty
seven and ninety
five paise only
six hundred forty
seven and thirty five
paise only
124705.37
Rupees two
thousand nine
hundred thirty
seven and seventy
paise only


and ten paise only


ten paise only

only
five paise only

hundred fifty and
five paise only
eighty eight and
Rupees one thousnd 518685.18

one hundred
ninteen and forty
paise only
Rupees one 59575.30

thousand one
hundred thirty five
and twenty paise
only

thousand six and
ten paise only

eighty seven and
sixty paise only


thousand five
hundred twenty
seven and twenty
five paise only

hundred eighty four
hundred forty four
and ninety paise
only

hundred sixty six
Rupees one 61411.62

thousand three and
ninety five paise
only
Rupees one 73272.65
thousand one
hundred fifty three
and ninety paise
only
only

hundred and fifty
nine only
fifty paise only

Rupees one 409514
and sixty five only

hundred and thirty
only

hundred and fifteen
only
and eight hundred
only

thousand only
Rupees twenty six 766521.00

thousand four
hundred and fifty
only
Rupees thirty two 259048
thousand three
hundred and eighty
one only
Rupees thirty two

thousand three
hundred and eighty
one only
7448545
hundred and
fourteen only
hundred and sixty
only

hundred and six
only

hundred and fifty
three only
hundred and sixty
two only

and fourteen only

and twenty three
only

and thirty three only

and forty three only
Ruupees one 21833.98

hundred and sixty
six only

and eighty only

and ninety three
only

and seven only

and twenty one only
thousand and eighty
four only

thousand one
hundred and thirty
six only

thousand one
hundred and eighty
seven only
thousand two
hundred and thirty
nine only

thousand two
hundred and ninety
only

thousand eight
hundred and sixteen
only
thousand eight
hundred and forty
seven only

thousand eight
hundred and
seventy seven only

thousand nine
hundred and seven
only
thousand nine
hundred and thirty
seven only

thousand eight and
sixteen only

thousand eight
hundred and forty
seven only

thosuand eight
hundred and
seventy seven only
thousand nine
hundred and seven
only


and sixty four only

and seventy one
only
and seventy eight
only

and eighty five only

thousand nine
hundred and fifty
four only

and seventy four
only
and ninety seven
only

and forty six only

and thirty one only

only
hundred and sixty
nine only

hundred and sixteen
only
Rupees nine 6831.00

hundred seventeen
and seventy five
paise only
Extra item
hundred fifty and

hundred seventy
eight and sixty paise
only
Rupees four 3779.59
hundred twenty two
thousnd five
hundred seventeen
and twenty paise
only

and twenty paise
only
thousand three
hundred fifty one
only

forty five and
seventy paise only
five paise only
Rupees four 4279.50
hundred twenty
seven and ninety
five paise only

and ten paise only
only


only
505349.46

hundred six and
twenty five paise
only
hundred fifty seven
only
eighty eight and

thousdand one
hundred ninteen
Rupees one 31955.88

thousand one
hundred thirty five
and twenty paise
only
thousand two
hundred thirty three
and seventy five
paise only

forty eighty and
seventy five paise
only
ten paise only

eighty two and fifty
five paise only

eighty one and forty
paise only

ousand five hundred twenty seven and twenty
250224.64
five paise only
Rupees forty and 8023.09

sixty five paise only
hundred eighty four

hundred forty four
and ninety paise
only
hundred sixty six
Rupees one 2409.48

thousand three and
ninety five paise
only
Rupees one 9554.29

thousand one
hundred fifty three
and ninety paise
only
only

nine and thirty paise
only

hundred and fifty
nine only

and twenty five
paise only

thousand four
hundred nine and
ninety paise only
thousand four
hundred nine and
ninety paise only
ee thousand seven hundred thirty and
1,577,676.00
seventy paise only

thousand nine
hundred forty one
Rupees one 60161.40

thousand five
hundred forty two
thosuand seven
hunred ninety eight
and seventy only

thousand four
hundred five and
ninety paise only
nine hundred twenty
eight and fifty five
paise only
thousand and eight
hundred only

thousand only
11200744.40
Rupees Eight fifty 4748.58
one

thousand four
hundred and fifty
nine only

only

five paise only
Rupees seven lakhs 1450000.00
and twenty five
thousand only
1628820.21
only

only

and seventeen only

and thirty seven
only

hundred and twenty
eight only

thousand four
hundred and fifty
nine only
thousand seven
hundred and sixty
eight only

thousand one
hundred and twenty
nine only

thousand seven
hundred and twenty
nine only
thousand nine
hundred and
seventy three only

and fourteen only

and fourteen only

only

thousand seven
hundred fifty one
and sixty five paise
only
and ten paise only

only

Rupees ninety and 1442556.00

twenty five paise
only #REF! 13986 1,998.00
Extra item
only
and eighty paise
only
Rupees eighty five 1127217.06

only
hundred sixty two

hundred eighty four
hundred forty four
and ninety paise
only
Rupees one 83080.80

thousand one
hundred fifty three
and ninety paise
only
only

hundred and fifty
nine only
Rupees sixtey eight 1092.80

thousand only
Extra item
and ninety seven
only
Extra item

and thirty six only
Extra item

hundred and sixteen
only
Extra item
7298732.94
thousand six
hundred and eighty
nine only

thousand three
hundred and sixty
only
Rupees one 58050.00
thousand three
hundred and fifty
only
Rupee nine hundred 40592.00
and forty four only
Rupees one 38070.00
thousand two
hundred sixty nine
only
and forty three only
thousand four
hundred and eighty
one only
Rupees one 78384.00
thousand seven
hundred and four
only
Rupees one 79464.00
thousand eight
hundred and six
only
and thirteen only
Rupees four 9918.00
thousand nine
hundred and fifty
nine only
and thirty seven
only
Rupess three 65100.00
thousand and one
hundred

thousand eight
hundred and sixty
six only

hundred seventy five
and seventy paise
only
and eighty paise
only
Rupees two 45311.20
thousand eight
hundred thirty one
only
Rupees three 654.10

hundred twenty
seven and five paise
only
Rupees three 663.90
hundred thirty one
only
thousand three
hundred and ninety
five only
thousand three
hundred and ninety
five only
Rupees one 2550.00
thousand two
hundred and
seventy five only
and twenty five only
Rupees four 4020.00

thousand and
twenty only
Rupees four 4675.00

thousand six
hundred and
seventy five only
hundred ninety four
only
hundred twenty one
and sixty five paise
only
Rupees thiry one 775.00
only
Rupees forty and 16463.25

sixty five paise only

sixty seven and

sixty five and five
paise only

hundred eighty four
and ninety paise
only
hundred thirty four
only
and twenty three
only
Rupees four 4723.50
hundred seventy two
and thirty five paise
only
twelve and sixty five
paise only
eighty seven and
ninteen and fifteen
paise only
only
Rupees fifty six and 848.25
fifty five paise only
Rupees one 67239.25
only
hundred eight and
hundred ninety four
and fifteen paise
only
Rupees four 9448.00
hundred seventy two
Rupees ten and 976.50
eighty five paise only
Rupees twelve and 494.00
Rupees fourteen and 296.00
eighty paise only
Rupees one 24750.00
thousand six
hundred and fifty
only
Rupees one 73775.00

thousand one
hundred and thirty
five only
Rupees one 45875.00
thousand eight
hundred and thirty
five only
thirty six and thirty
five paise only
only

eighty one and fifty
five paise only

thirtee and ten paise
eighty one and forty
paise only
Rupees fourty and 409.00

ninety paise only
hundred and fifteen
only

forty two and ninety
five paise only

seventy nine and
ninety five paise
only

sixtee and twenty
paise only
eight nine and five
paise only

hundred eighty five

fourty eight and fifty
five paise only

and seventy only

ninety six and fourty
paise only
hundred fifty one
hundred twelve and
ninety paise only
sixty and ten paise
only
eighty and forty
paise only
Rupees four 9949.32
hundred twenty
eight and eighty five
paise only
one and fifty paise
only
eighty five and fifty
paise only
Rupees seven 750.75
hundred fifty and
seventy five paise
only
thirty eight and five
paise only

twenty five and forty
five paise only

hundred and fifty
two only

eighty six and thirty
two paise only
Rupees one 55440.00

thousand one
hundred eight and
eighty paise only
twenty two and
ninety five paise
only
hundred sixty one
only
and ten paise only
thousand and
twenty seven only
ninety three and
ninety five paise
only
Rupees one 24036.00
thousand six
hundred two and
fourty paise only

sixteen and twenty
five paise only
hundred twenty
seven and five paise
only
hundred twenty
three and thirty five
paise only
hundred fifty five
and seventy paise
only
hundred eighty two
and five paise only
eighty five and fifty
paise only
thousand six
hundred thirty four
and ten paise only

eight thousand four
hundred twenty two
thousand seven
hundred eighteen
eight hundred fifty
and seventy paise
only
Rupees eight 86838
thousand six hundred
eighty three and
seventy five paise only
thousand nine
hundred eleven and
eighty paise only
thousand seven
hundred twenty and
ninety paise only

five hundred five
and fifteen paise
only
thousand eight
hundred forty five
and five paise only
and five paise only

thousand three
hundred and ninety
seven only
thousand fourty
three and ten paise
only
thousand three
hundred eighty four
eight six and thirty
paise only
five and eighty five
paise only
fourty seven and
fourty paise only
hundred one and
five paise only
hundred fourty two
and seventy paise
only
hundred fifty one
and seventy paise
only
seventy six and
thirty paise only
Rupess seven and 35.50
ten paise
Rupees nine and ten 45.50
paise only
Rupees ten and 162.75
eighty five paise only
Rupees twelve and 1235.00
Rupees fourteen and 1480.00
eighty paise only
and twenty five
paise only
and twenty paise
only
and seventy paise
only
Rupees sixty nine 347.50
Rupees seventy one 1069.50
Rupees seventy two 7225.00
and twenty five
paise only
Rupees seventy four 7495.00
only
eighteen and thirty
paise only
twenty one and
ninety paise only
Rupees three 396.55
hundred ninety six
only
Rupees four 428.20
hundred twenty
eight and twenty
paise only
and seventy five
paise only
eighty four and
seventy paise only
Rupees seven 749.90
hundred fourty nine
and ninety paise
only
fourty seven and
seventy five paise
only
seventy and ninety
five paise only
five and eighty paise
only
fourty and sixty five
paise only
ninety eight and
seventy five paise
only
hundred eighty four
and ninety paise
only
seventeen and
twenty paise only
ninety eight and fifty
paise only
Rupees one 4781.40
thousand one
hundred ninety five
and thirty five paise
only

eight hundred fourty
nine and sixty paise
only
Rupees four 8040.00

thousand and
twenty only

eighteen and ninety
five paise only

ten and sixty five
paise only

hundred twenty one
and ninety paise
only
Rupees one 12456.60
thousand thirty
eight and five paise
only
Rupees one 12456.60
thousand thirty
eight and five paise
only
Rupees one 28214.40
thousand one
hundred seventy five
fifty three and ninety
five paise only
hundred twenty
seven and ninety
paise only

thousand six
hundred fifty five
and twenty paise
only
Rupees forty eight 96000.00
thousand only
Rupees Seven laksh 750000

fifty thousand only
fifty thousand only
thousand only

and ten thousand
only
Rupees twenty 20000.00

thousand only
Rupees forty 80000.00
thousand only

thousand only

thousand only

thousand only
thousand only
thousand only
Rupees eighty 80000.00

thousand only

thousand only
thousand only
Rupees eighty 80000.00

thousand only
thousand only

and nintey thousand
only

and forty thousand
only
thousand two
hundred and twenty
only

thousand two
hundred and
seventy only
thousand two
hundred and
seventy only

twenty thousand six
hundred and twenty
only
Rupees eighty two 82400.00

thousand and four
hundred only
twelve thousand and
seventy only

thousand two
hundred and ninety
only
Rupees twenty nine 29380.00

thousand three
hundred and eighty
only
forty five thousand
and nine hundred
only

ninety five only
Rupees nine 9300.00

hundred and thirty
only
Rupees one 11300.00
thousand one
hundred and thirty
only
Rupees one 13800.00

thousand three
hundred and eighty
only
Rupees one 28125.00

thousand eight
hundred and
seventy five only

thousand four
hundred and fifty
only

thousand and one
hundred only

thousand and sixty
seven only

thousand eight
hundred and twelve
only
thousand and eighty
eight only
Rupees one 3446.00

thousand seven
hundred and twenty
three only

thousand and five
hundred only

thousand seven
hundred and twenty
five only

and sixty only
9575758.42
159687518.49

Boq

Uploaded by

Copyright:

Available Formats

Boq

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Boq

Uploaded by

Copyright:

Available Formats

Schedule A

53 2.00 Approx. size 1600x600x750 mm Job 10000

D). SUB ESTIMATE FOR SIGNAGE WORKS

59 4 WALL/ PILLAR MOUNTED NS 1 Nos. 6900

63 35 Facia Board NS 1 Sqmt. 14000

67 15 Manufacturing, supplying and fixing of S.S.Plate of followin size made of 2 mm NS 1 Kg 900

71 16 Installation of Split Air Conditioners. APSS 1 No. 1500

Ceiling Rail-The telescopic ceiling rails shall be made of aluminium extrusions

Idler is high strength reinforced plastic consisting of an outside sleeve and

Windows:-Plain aluminium sliding glass windows

88 2 GATE COUNETR-950mm WIDE--Stainless steel kick plate, NS 1 Each 188500

92 13 HAND DRIER-Supplying and placing of automatic electrically operated Hand Dryer in

1. ON/OFF MODE: The drier goes on when hands approach, automatically,

93 8 SUBHEAD V - MODULAR STORAGE ITEMS--FULL HEIGHT STORAGE-- NS 1 Each 24611.84

94 8 OVERHEAD STORAGES--Supplying and placing of overhead storage of size NS 1 Each 9595.03

Table Top:- Work Surface:Top thickness should be 35 mm Membrane finish,

The handle in the drawers shall be made of injection moulded polypropylene.

All wheels will be of moulded synthetic non-marking rubber tyred with

Identification Plate:Plate of size 100 mm X 80 mm X 1.5 mm thick Aluminium

Stringers system in all steel construction hot dipped galvanized of

Providing and fixing Access Floor panel of 600x600x32 mm medium

120 1 Supply of NTP Server with accessories NS 1 Each 150000

135 1 Charges for Training and documentation NS 1 Lot 452000

136 2 BAGGAGE SCANNERSupply, Installation, Integration, Testing and NS 1 Set 3592745

138 1 K) SUB ESTIMATE FOR FIRE FIGHTING APSS 1 Set 390000

143 14 SUB HEAD - II - (HYDRANTS SYSTEM) APSS 1 Each 8125

150 1 SITC of sprinkler installation valve 9.84 1 Each 9500

FM-200 Seamless Cylinder CCOE Approved, (100 Ltrs.) (Siemens)

193 75 FM-200 Gas (1,1,1,2,3,3,3 Hepta fluro propane) manufactured by NS 1 Kg 5081

195 1 Manual Operated Control Head NS 1 Nos 12703

196 1 Manual Activation Mechanical box. NS 1 Nos 8469

198 1 Corner Pulleys (6 nos.), End of Line (2 nos.) NS 1 Nos 7622

204 1 Manual Abort Switch (Raval) NS 1 Nos 6351

205 2 Conventional Smoke Detector with base (Raval) NS 1 Nos 3260

206 1 Conventional Hooter. (Raval) NS 1 Nos 7622

207 120 2C x 1.5 Sq.mm Cable NS 1 Mtr. 169

208 1 Piping, fittings & supports, etc. NS 1 Lot 119971

235 12 Supply of 40A 2 Pole RCCB 30mA, ASR-ELEC- 1 Each 2700

Supply and Transportation of 12W Down lighter with system lumens of

264 2 Supply of LED aviation light luminaire. NS 1 Each 8188

273 2 Supply & fixing of electro-Mechanical counter. ASR-ELEC- 1 Nos. 16000

285 3 Supply & fixing of 24 Port switches. ASR-ELEC- 1 Each 5200

10.Jerk (m/sec.sq) 0.7-1.5 (adjustable at site)

Outgoing:- Each Outgoing feeder consist with the following

Protection Release Microprocessor Based (PRMB-1)

Protection Release Microprocessor Based (PRMB-3)

Protection Release Thermal-Magnetic Based (PRTM)

The outgoing feeders as indicated in SLD shall have suitable range of

1034 2 Capacitor Panel (150 kVAR) NS 1 Set 250174

Note:The capacitor panel shall also stipulate the following

MDB- 1 (Terminal Block)

METERING & INDICATION

METERING & INDICATION

1039 1 NS 1 Set 278406

METERING & INDICATION

MDB - 4 (Fire Pump) as described above

1041 1 Main Feeder Piller for Approach Lighting NS 1 Set 62207

Supply, Installation, testing & Commissioning of Module mounting Structure

Qty Vide Page No 2 of MB No 27/A