4 - Column Design

spColumn v7.
00
Computer program for the Strength Design of Reinforced Concrete Sections
Copyright - 1988-2022, STRUCTUREPOINT, LLC.
All rights reserved
y
x
Licensee stated below acknowledges that STRUCTUREPOINT (SP) is not and cannot be responsible for either the accuracy or adequacy of the material
supplied as input for processing by the spColumn computer program. Furthermore, STRUCTUREPOINT neither makes any warranty expressed nor implied
with respect to the correctness of the output prepared by the spColumn program. Although STRUCTUREPOINT has endeavored to produce spColumn error
free the program is not and cannot be certified infallible. The final and only responsibility for analysis, design and engineering documents is the licensee's.
Accordingly, STRUCTUREPOINT disclaims all responsibility in contract, negligence or other tort for any analysis, design or engineering documents prepared
in connection with the use of the spColumn program. Licensed to: NLE, NLE. License ID:
STRUCTUREPOINT - spColumn v7.00 Page | 2
Licensed to: NLE, NLE. License ID: 12/7/2022
c:\users\nle\desktop\structural analysis and design\on-going 2022\charity\2203-0012_muril...\c1.col 7:34 AM
Contents
1. General Information .........................................................................................................................................3
2. Material Properties...........................................................................................................................................3
2.1. Concrete...................................................................................................................................................3
2.2. Steel .........................................................................................................................................................3
3. Section.............................................................................................................................................................3
3.1. Shape and Properties...............................................................................................................................3
3.2. Section Figure ..........................................................................................................................................4
4. Reinforcement .................................................................................................................................................4
4.1. Bar Set: ASTM A615 ................................................................................................................................4
4.2. Confinement and Factors .........................................................................................................................4
4.3. Arrangement.............................................................................................................................................4
4.4. Bars Provided...........................................................................................................................................5
5. Factored Loads and Moments with Corresponding Capacity Ratios...............................................................5
6. Diagrams .........................................................................................................................................................6
6.1. PM at θ=0 [deg] ........................................................................................................................................6
6.2. PM at θ=90 [deg] ......................................................................................................................................7
6.3. PM at θ=263 [deg] ....................................................................................................................................8
6.4. MM at P=0 [kN].........................................................................................................................................9
6.5. MM at P=87 [kN].....................................................................................................................................10
List of Figures
Figure 1: Column section.....................................................................................................................................4
1. General Information
File Name c:\users\nle\desktop\structural
analysi...\c1.col
Project Murillo 2 Storey Apt w/ RD
Column C1
Engineer ---
Code ACI 318-11
Bar Set ASTM A615
Units Metric
Run Option Investigation
Run Axis Biaxial
Slenderness Not Considered
Column Type Structural
Capacity Method Moment capacity
2. Material Properties
2.1. Concrete
Type Standard
f'c 21 MPa
Ec 21538.1 MPa
fc 17.85 MPa
εu 0.003 mm/mm
β1 0.85
2.2. Steel
Type Standard
fy 228 MPa
Es 200000 MPa
εyt 0.00114 mm/mm
3. Section
3.1. Shape and Properties
Type Rectangular
Width 250 mm
Depth 400 mm
Ag 100000 mm2
Ix 1.33333e+009 mm4
Iy 5.20833e+008 mm4
rx 115.47 mm
ry 72.1688 mm
Xo 0 mm
Yo 0 mm
3.2. Section Figure
y
x
Rectangular 250 x 2.00% reinf.

400 mm
Figure 1: Column section
4. Reinforcement
4.1. Bar Set: ASTM A615
Bar Diameter Area Bar Diameter Area Bar Diameter Area
mm mm2 mm mm2 mm mm2
#3 9.53 70.97 #4 12.70 129.03 #5 15.88 200.00
#6 19.05 283.87 #7 22.23 387.10 #8 25.40 509.68
#9 28.65 645.16 #10 32.26 819.35 #11 35.81 1006.45
#14 43.00 1451.61 #18 57.33 2580.64
4.2. Confinement and Factors

Confinement type Tied
For #10 bars or less #3 ties
For larger bars #3 ties
Capacity Reduction Factors

Axial compression, (a) 0.8
Tension controlled ɸ, (b) 0.9
Compression controlled ɸ, (c) 0.65
4.3. Arrangement
Pattern Sides different
Bar layout Rectangular
Cover to Transverse bars
Clear cover ---
Bars ---
Total steel area, As 2000 mm2

Rho 2.00 %
Minimum clear spacing 52 mm
4.4. Bars Provided

Bars Clear cover
mm
Top 3 #5 40
Bottom 3 #5 40
Left 2 #5 40
Right 2 #5 40
5. Factored Loads and Moments with Corresponding Capacity Ratios

NOTE: Calculations are based on "Moment Capacity" Method.
No. Demand Capacity Parameters at Capacity Capacity

Pu Mux Muy ɸPn ɸMnx ɸMny NA Depth εt ɸ Ratio
kN kNm kNm kN kNm kNm mm
1 341.57 -0.35 -0.82 341.57 -21.52 -50.09 133 0.00265 0.748 0.02
2 2.87 1.60 -1.21 2.87 40.79 -30.80 118 0.00468 0.879 0.04
3 164.96 19.00 -0.06 164.96 87.12 -0.27 101 0.00728 0.900 0.22
4 212.38 -18.11 2.22 212.38 -86.26 10.60 153 0.00458 0.873 0.21
5 20.08 3.41 22.50 20.08 5.88 38.86 63 0.00711 0.900 0.58
6 86.85 -3.42 -28.55 86.85 -5.21 -43.50 68 0.00632 0.900 0.66
6. Diagrams
6.1. PM at θ=0 [deg]
6.2. PM at θ=90 [deg]

6.3. PM at θ=263 [deg]

6.4. MM at P=0 [kN]

6.5. MM at P=87 [kN]

4 - Column Design

Uploaded by

Copyright:

Available Formats

4 - Column Design

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4 - Column Design

Uploaded by

Copyright:

Available Formats

spColumn v7.

3.2. Section Figure

Rectangular 250 x 2.00% reinf.

Figure 1: Column section

4.2. Confinement and Factors

Capacity Reduction Factors

Total steel area, As 2000 mm2

4.4. Bars Provided

5. Factored Loads and Moments with Corresponding Capacity Ratios

No. Demand Capacity Parameters at Capacity Capacity

6.2. PM at θ=90 [deg]

6.3. PM at θ=263 [deg]

6.4. MM at P=0 [kN]

6.5. MM at P=87 [kN]

You might also like