Roboti (E) 42

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

Robot + !

Cost Savings through Intelligent Robotization for the 21st Century


Advantage of using robots
• FANUC Robots will provide your factories with a wide range of advantages.

Increased Productivity Improved Work Reliability


Collaborative Operation
• Robots are able to handle • Robots are highly durable and
products that are too heavy can be relied on for a
and unsafe for humans to lift. long-term operation.
• Robots are able to operate • Robots are able to perform
faster than humans. complex tasks and operations
• Robots can work nights, week- on behalf of humans.
ends, holidays, and in“lights • No sudden surprises such as
out”facilities without a rest. sick leave or retirement exists.

Higher Product Quality Reduced Costs


Spot Welding
• Robots are more accurate • Replacing manual operations
than manual labor. with robots can reduce
• Robots provide higher product personnel costs.
quality more consistently than • Easier system or process
manual labor. changeover can be realized.

Various application of robots


• FANUC has a wide range of robot types and models available for various applications.
• Various features are available for FANUC robots to make a maximum use of robot flexibilities.

Load/unload Arc Welding Bin Picking Logistics/Warehouse

Assembly Deburring Pharmaceuticals Food Packing

Error Proofing Laser Cutting Washing Painting


FANUC Robot + series

CRX-5+A CRX-10+A CRX-10+A/L CRX-20+A/L CRX-25+A CR-35+B SR-3+A SR-6+A SR-3+A/U M-1+A M-2+A DR-3+B

Collaborative Robot
FANUC Robot CRX series CRX-5*A CRX-10*A CRX-10*AL CRX-20*AL CRX-25*A
Controlled axes 6
Max.payload at wrist 5kg 10kg 20kg 25kg(Max.30kg)
994mm, 1988mm 1249mm, 2498mm 1418mm, 2836mm 1889mm, 3778mm
Motion range(X,Y) (To end of flange) (To end of flange) (To end of flange) (To end of flange)
(J4=+90deg.) (J4=+90deg.) (J4=+90deg.) (J4=+90deg.)
Y

Repeatability ±0.03mm ±0.04mm ±0.05mm


Mass 25kg 40kg 41kg 135kg
Installation Floor, Upside-down, Angle
X
Matching controller R-30*B Mini Plus
Application Handling, Assembling, Arc welding

FANUC Robot CR-35+B CR-35*B


Controlled axes 6
Max.payload at wrist 35kg(Max.50kg)
1831mm(35kg payload mode) , 3266mm
Motion range(X,Y)
1643mm(50kg payload mode) , 3266mm
Y

Repeatability ±0.03mm
Mass 386kg
Installation Floor
X Matching controller R-30*B Plus(A-cabinet)
Application Handling, Assembling

SCARA Robot
FANUC Robot SR series SR-3*A SR-3*A/H SR-6*A SR-6*A/H SR-12*A SR-20*A
Controlled axes 4 3 4 3 4
Max.payload at wrist 3kg 6kg 12kg 20kg
Motion range(X,Y) 400mm, 800mm 650mm, 1300mm 900mm, 1800mm 1100mm, 2200mm
Stroke(Z) 200mm 210mm 300mm (option:450mm)
J1+J2 axis ±0.01mm ±0.02mm
Y

Repeatability J3 stroke ±0.01mm


J4 axis ±0.004° ±0.004° ±0.005°
Mass 19kg 17kg 30kg 28kg 53kg 64kg
Installation Floor, Wall
X Matching controller R-30*B Compact Plus
Application Handling

FANUC Robot SR series SR-3*A/C SR-6*A/C SR-3*A/U


Controlled axes 4
Max.payload at wrist 3kg 6kg 3kg
Motion range(X,Y) 400mm, 800mm 650mm, 1300mm 350mm, 700mm
Stroke(Z) 200mm 210mm 140mm
J1+J2 axis ±0.01mm
Y

Repeatability J3 stroke ±0.01mm


J4 axis ±0.004°
Mass 21kg 32kg 27kg
Installation Floor, Wall Ceiling
X Matching controller R-30*B Compact Plus
Application Handling, Clean room Handling

Delta Robot
FANUC Robot M-1+A /0.5A /0.5S /0.5AL /0.5SL
Controlled axes 6 4 6 4
Max.payload at wrist 0.5kg(option:1kg)
Motion range(X,Y) φ280mm, 100mm φ420mm, 150mm
Repeatability ±0.02mm
Mass(without stand) 17kg 14kg 20kg 17kg
Installation Floor, Ceiling, Angle
Y

X Matching controller R-30*B Mate Plus (Standard, open air)


Application Handling, Assembling Handling Handling, Assembling Handling

FANUC Robot M-2+A /3S /3SL


Controlled axes 4
Max.payload at wrist 3kg
Motion range(X,Y) φ800mm, 300mm φ1130mm, 400mm
Repeatability ±0.03mm
Mass 130kg
Installation Ceiling
Y

X
Matching controller R-30*B Plus
(A-cabinet)/R-30*B Mate Plus
(standard, open air)
Application Handling

FANUC Robot M-3+A /6S /12H


Controlled axes 4 3
Max.payload at wrist 6kg(option:8kg) 12kg
Motion range(X,Y) φ1350mm, 500mm
Repeatability ±0.03mm
Mass 160kg 155kg
Installation Ceiling
Y

Matching controller R-30*B Plus


(A-cabinet)/R-30*B Mate Plus
(standard, open air)
X
Application Handling

FANUC Robot DR-3+B /6 STAINLESS /8L


Controlled axes 4
Max.payload at wrist 6kg 8kg
Motion range(X,Y) φ1200mm, 450mm φ1600mm, 500mm
Repeatability ±0.03mm
Mass 250kg 170kg
Installation Ceiling
Y

Matching controller R-30*B Plus(A-cabinet), R-30*B Mate Plus(standard) R-30*B Plus(A-cabinet), R-30*B Mate Plus(standard, open air)
X
Application Handling
LR Mate 200+D/4S LR Mate 200+D LR Mate 200+D/7L LR-10+A/10 ARC Mate 100+D/16S ARC Mate 100+D ARC Mate120+D ARC Mate120+D/35 ARC Mate120+D/12L M-20+B/25
M-10+D/16S M-10+D/12 M-20+D/25 M-20+D/35 M-20+D/12L

Mini Robot
FANUC Robot LR Mate 200+D 200*D /4S /14L
/7L
FANUC Robot ARC Mate 50+D
FANUC Robot ER-4+A ER-4*A
Controlled axes 6
Max.payload at wrist 7kg 4kg 14kg 4kg
911mm(load capacity<12kg), 1643mm
Motion range(X,Y) 717mm, 1274mm 911mm, 1643mm 550mm, 970mm 550mm, 970mm
820mm(load capacity≧12kg), 1643mm
Y
Repeatability ±0.01mm
Mass 25kg 27kg 20kg 27kg 20kg
Installation Floor, Upside-down, Angle Floor, Upside-down
Matching controller R-30*B Mate Plus(standard, open air) R-30*B Mate Plus (standard, open air)
X Application Handling, Assembling, Arc welding, Sealing, Mold release spray, Deburring Handling, Assembling

FANUC Robot LR Mate 200+D /7WP /7C /7LC /7H


Controlled axes 6 5
Max.payload at wrist 7kg
Motion range(X,Y) 717mm, 1274mm 911mm, 1643mm 717mm, 1274mm
Y Repeatability ±0.01mm
Mass 25kg 27kg 24kg
Installation Floor, Upside-down, Angle
Matching controller R-30*B Mate Plus(standard, open air)
X Application Handling, Washing Handling, Assembling, Clean room Handling

Small/Medium Size Robot


FANUC Robot LR-10+A /10
Controlled axes 6
Max.payload at wrist 10kg
Motion range(X,Y) 1101mm, 1988mm
Y Repeatability ±0.02mm
Mass 46kg
Installation Floor, Upside-down, Angle
Matching controller R-30*B Mate Plus (standard, open air)
X Application Handling, Assembling, Sealing, Mold release spray, Deburring

Arc Welding Robot, Small/Medium Size Robot


FANUC Robot ARC Mate 100+D ARC Mate 100*D
/16S /10L /8L
FANUC Robot M-10+D M-10*D/12
Controlled axes 6
Max.payload at wrist 16kg 12kg 10kg 8kg
Motion range (X,Y) 1103mm, 1977mm 1441mm, 2616mm 1636mm, 3006mm 2032mm, 3762mm
Repeatability ±0.02mm ±0.03mm
Y

Mass 145kg 150kg 180kg


Installation Floor, Upside-down, Angle * Floor, Upside-down for 4BK
Matching controller R-30*B Plus(A-, B-cabinet), R-30*B Mate Plus(standard)
X Application Handling, Assembling, Arc welding, Sealing, Deburring

FANUC Robot ARC Mate 120+D ARC Mate 120*D


/35 /12L
FANUC Robot M-20+D M-20*D/25
Controlled axes 6
Max.payload at wrist 25kg 35kg 12kg
Motion range(X,Y) 1831mm, 3461mm 1831mm, 3461mm 2272mm, 4343mm
Repeatability ±0.02mm ±0.03mm
Y

Mass 250kg
Installation Floor, Upside-down, Angle
Matching controller R-30*B Plus(A-, B-cabinet) , R-30*B Mate Plus
(standard)
X
Application Handling, Assembling, Arc welding, Sealing, Deburring

Small/Medium Size Robot


FANUC Robot M-20+B /25 /25C /35S
Controlled axes 6
Max.payload at wrist 25kg 35kg
Motion range(X,Y) 1853mm, 3345mm 1445mm, 2591mm
Repeatability ±0.02mm
Y

Mass 210kg 205kg


Installation Floor, Upside-down, Angle
Matching controller R-30*B Plus (A-, B-cabinet), R-30*B Mate Plus(standard)
X Application Handling, Assembling, Arc welding, Sealing, Deburing Handling, Assembling, Clean room Handling, Assembling, Arc welding, Sealing, Deburing
M-710+D/50M M-710+C/20L M-800+A/60 R-1000+A/80F R-2000+C/210F R-2000+C/165R R-2000+D/210FH R-2000+C/270F

Small/Medium Size Robot


FANUC Robot M-710+D /50M /70

FANUC Robot M-710+C /12L /20L /20M /50S /50H


Controlled axes 6 5
Max.payload at wrist 50kg 70kg 12kg 20kg 20kg 50kg 50kg
Motion range(X,Y) 2606mm, 4758mm 2104mm, 3788mm 3123mm, 5609mm 3110mm, 5583mm 2582mm, 4609mm 1359mm, 2043mm 2003mm, 3451mm
Repeatability ±0.06mm ±0.03mm ±0.06mm ±0.03mm
Y

Mass 600kg 580kg 540kg 530kg 545kg 540kg


Installation Floor, Upside-down, Angle Floor, Upside-down
Matching controller R-30*B Plus
(A-, B-cabinet)/R-30*B Mate Plus
(standard)

X Application Handling, Assembling, Arc welding, Sealing, Spot welding, Deburing, Laser cutting Handling
* R-30*B Mate Plus controller(standard)is not available for /50H.
FANUC Robot M-800+A /60
Controlled axes 6
Max.payload at wrist 60kg
Motion range(X,Y) 2040mm, 3221mm
Repeatability ±0.015mm
Y

Mass 820kg
Installation Floor

X
Matching controller R-30*B Plus
(A-, B-cabinet)
Application Laser machining, Handling, Assembling, Sealing

FANUC Robot R-1000+A /80F /100F /130F /120F-7B /80H


Controlled axes 6 7 5
Max.payload at wrist 80kg 100kg 130kg 120kg 80kg
Motion range(X,Y) 2230mm, 3738mm 2230mm, 3779mm 2230mm, 3465mm
Repeatability ±0.03mm
Y

Mass 620kg 665kg 675kg 790kg 610kg


Installation Floor, Upside-down
R-30*B Plus
(A-, B-cabinet)
Matching controller R-30*B Plus
(A-, B-cabinet)
R-30*B Mate Plus
(standard)
X
Application Handling, Assembling, Sealing, Spot welding Handling

Large Size Robot


FANUC Robot R-2000+D /100FH /165FH /210FH

FANUC Robot R-2000+C /165F /210F /240F /125L


Controlled axes 6
Max.payload at wrist 100kg 165kg 210kg 165kg 210kg 240kg 125kg
Motion range
(X,Y) 2605mm, 3315mm 2655mm, 3414mm 3100mm, 4304mm
Repeatability ±0.05mm
Y

Mass 1150kg 1090kg 1115kg


Installation Floor
Matching controller R-30*B Plus
(A-, B-cabinet)/R-30*B Mate Plus(standard)
X
Application Handling, Assembling, Sealing, Spot welding, Press to press handling, Deburring

FANUC Robot R-2000+C /270F /210L /165R /210R /270R /100P /100PH
Controlled axes 6
Max.payload at wrist 270kg(option:300kg) 210kg 165kg 210kg 270kg 100kg
Motion range
(X,Y) 2655mm, 3414mm 3100mm, 4304mm 3095mm, 4733mm 3540mm, 5623mm
Repeatability ±0.05mm
Mass 1320kg 1350kg 1370kg 1590kg 1470kg 1495kg
Y

Installation Floor Rack


R-30*B Plus(A-, B-cabinet)
Matching controller R-30*B Plus(A-, B-cabinet) R-30*B Plus
(A-,B-cabinet)
X R-30*B Mate Plus(standard)
Application Handling, Assembling, Sealing, Spot welding, Press to press handling, Deburring Press to press handling

FANUC Robot R-2000+C /190S /220U /190U /210WE


Controlled axes 6
Max.payload at wrist 190kg 220kg 190kg 210kg
Motion range
(X,Y) 2040mm, 3170mm 2518mm, 3414mm 3100mm, 4304mm 2450mm, 3415mm
Repeatability ±0.03mm ±0.05mm ±0.10mm
Y

Mass 1120kg 1020kg 1400kg 1180kg


Installation Floor, Upside-down Upside-down Floor
Matching controller R-30*B Plus
(A-, B-cabinet)
X
Application Handling, Assembling, Sealing, Spot welding, Press to press handling, Deburring Washing
M-900+B/360 M-900+B/700 M-1000+A M-2000+A/2300 M-2000+A/1700L M-410+C/185 P-40+A P-350+A/45 P-250+B/15 P-1000+A

Large Size Robot


FANUC Robot M-900+B /360 /360E /280L /280 /330L /700 /700E /400L
Controlled axes 6
Max.payload at wrist 360kg 280kg 330kg 700kg 400kg
Motion range
(X,Y) 2655mm, 3308mm 3103mm, 4200mm 2655mm, 3308mm 3203mm, 3539mm 2832mm, 3288mm 3704mm(*), 4621mm
Repeatability ±0.1mm
Y

Mass 1540kg 1600kg 1700kg 1780kg 2800kg 3030kg 3150kg


Installation Floor, Upside-down, Angle Floor
Matching controller R-30*B Plus
(A-,B-cabinet) R-30*B Plus
(B-cabinet)
X
Application Handling, Assembling, Sealing, Spot welding, Press to press handling, Deburring

*: Wrist motion is restricted when the wrist payload is over 300kg.

FANUC Robot M-1000+A M-1000*A


Controlled axes 6
Max.payload at wrist 1000kg
Motion range(X,Y) 3253mm, 4297mm
Repeatability ±0.10mm
Y

Mass 5300kg
Installation Floor
Matching controller R-30*B Plus
(A-,B-cabinet)
Application Handling
X

FANUC Robot M-2000+A /1200 /900L /2300 /1700L


Controlled axes 6
Max.payload at wrist 1200kg(option:1350kg) 900kg 2300kg 1700kg
Motion range(X,Y) 3734mm, 4683mm 4683mm, 6209mm 3734mm, 4683mm 4683mm, 6209mm
Repeatability ±0.18mm ±0.27mm
Y

Mass 8600kg 9600kg 11000kg 12500kg


Installation Floor

X Matching controller R-30*B Plus


(A-, B-cabinet)
Application Handling

Palletizing Robot
FANUC Robot M-410+C /110 /185 /315 /500

FANUC Robot M-410+B /140H /700


Controlled axes 4 5 4
Max.payload at wrist 110kg 140kg 185kg 315kg 500kg 700kg
Motion range(X,Y) 2403mm, 2238mm 2850mm, 3546mm 3143mm, 2958mm
Repeatability ±0.05mm
Y

Mass 1030kg 1200kg Pedestal type 1600kg(*1) No pedestal 1330kg(*2) Pedestal type 2410kg(*1) No pedestal 1910kg(*2) 2700kg(*1)
Installation Floor
X Matching controller R-30*B Plus
(A-, B-cabinet)
Application Handling
*1:Controller mass(120kg) is included. *2:Controller mass(120kg) is not included.

Paint Robot
FANUC Robot P-40+A, 350+A, 250+B P-40*A P-350*A/45 P-250*B/15
Controlled axes 6
Max.payload at wrist 5kg 45kg 15kg
Motion range(X,Y) 1300mm, 2308mm 2606mm, 4575mm 2800mm, 5272mm
Repeatability ±0.03mm ±0.06mm ±0.2mm
Y

Mass 110kg 590kg 530kg


Installation Floor, Upside-down, Wall, Rack, Angle Floor, Upside-down, Wall, Rack, Angle Floor, Upside-down, Wall, Rack, Angle
X Matching controller R-30*B Mate Plus R-30*B Plus(A-cabinet)
Application Painting

FANUC Robot P-1000+A P-1000*A


Controlled axes 7
Max.payload at wrist 10kg
(1500mm/s), 15kg
(1200mm/s)
Motion range
(X,Y) 3396mm, 4396mm
(Metal arm) 3348mm, 4343mm
(Plastic arm)
Repeatability ±0.5mm
Y

Mass 700kg
Installation Wall
X Matching controller R-30*B Plus(A-cabinet)
Application Painting
High
Reliability

Features of FANUC Robot

High Support Various


Efficiency Applications
High Reliability
Reliable Zero Down Time
FANUC designs and manufacturers all robot components Zero Down Time combines various
with the highest quality and durability, including mechanical functions useful for preventive
arms, servo motors, controllers, software, and sensors. maintenance and helps to improve
production efficiency by controlling
these functions from a centralized
server. This allows failures to be
“Predictable” .
Predictable
Diagnostic features can inform you of conditions in which a
robot may fail, allowing for preventative maintenance on the Easy to Repair
robot before a failure.
・Robot mechanical units are designed for easy maintenance.
・Diagnostic features can estimate causes of failure,
assisting your quick repair.

High Efficiency
Learning Robot Visual Tracking
The Learning Robot provides Through Visual Tracking the
smooth and high-speed motion by robot tracks and picks parts
suppressing robot vibration. This moving on a conveyor by utilizing
enhances the robot’ s productivity the vision sensor located
and the efficiency of a production upstream. Multiple robots
line, which contributes to reduced connected via a network can
overall system costs. Also the automatically divide the workload
Learning Robot enhances the among the robots, allowing for
performance of handling a heavy automation in various picking
jig or workpiece, which causes robot vibration. and packing processes.

Support Various Applications


Collaborative Robot Network Function
The collaborative robot immediately OPC UA, MTConnect, Modbus
and safely stops when it comes in communication etc. are
contact with a human operator, supported. PC and PLC etc. can
allowing for safe operation in the input/output robot data.
same workspace without safety ROS interface is also supported.
fences. This provides production
efficiency and cost savings on labor
at your factory.
Additionally, lead through operation
and teaching are available.
Force Sensor/Deburring-Polishing
The Six-Axis Force Sensor,
*RVision - Integrated Robot Vision equipped on the robot’ s wrist,
enables a contouring motion of
Vision hardware is integrated in the the robot tool while maintaining a
robot controller as standard. 2D designated pushing force to the
compensation, 3D compensation, part. The force-controlled robot
color sorting, error proofing, bar contributes to automating
code reading, etc. can be realized processes such as deburring of
just by connecting Camera or 3D machined part edges and
sensor on the controller. polishing of part surfaces.
Also, vision teaching and camera
viewing can be done on the robot
teach pendant.

Bin Picking ROBOGUIDE


The Bin Picking Robot equipped ROBOGUIDE is a powerful PC
with a vision sensor automates simulation software providing
the picking process of randomly system layout, programming and
piled parts in a bin. The parts do accurate simulation tools for
not need to be arranged in design and evaluation of various
advance, eliminating the need for robot systems.
positioning fixtures. It also allows
for easy part changeover. The Bin
Picking Robot enables unmanned
part handling in your factories.
Controller
R-30*B Plus Controller R-30*B Mini Plus R-30*B Mate Plus Controller R-30*B Compact
A-Cabinet B-Cabinet Controller Standard Type Open Air Type Plus Controller

Rated Supply NRTL(UL1740)


110-120V AC +10%, -15%
Voltage 200−575V AC +10% -15% 200-240V AC +10%, -15%
200−230V AC +10% -15% 200-240V AC +10% -15%
Except NRTL(IEC60204-1)
50/60Hz ±1Hz, 3-phase 100-120V AC +10%, -10% 50/60Hz ±1Hz, 1-phase/3-phase 50/60Hz ±1Hz, 1-phase
200-240V AC +10%, -15%
50/60Hz ±1Hz 1-phase

Mass of Controller 120−140kg 180−200kg 20kg 40kg 20kg 9kg


Dimensions 470x322x400 370x350x200
600x470x500 740x550x1100 410x277x370 440x260x85.5
(W×D×H) 470x402x400 *1 370x350x356 *1
Overvoltage Overvoltage Category Ⅲ, Overvoltage Category Ⅱ, Overvoltage Category Ⅱ,Ⅲ, *3
Category / Pollution Degree 3, Pollution Degree 2, *2 Pollution Degree 2, *2
Pollution degree IEC60664-1, IEC/UL61010-1 IEC60664-1, IEC/UL61010-1 IEC60664-1, IEC/UL61010-1
Protection Class IP54 IP20
Emergency stop Emergency stop function PL=e, Cat4(ISO13849-1) SIL3(IEC61508)
Position/Speed check function PL=d, Cat3(ISO13849-1) SIL2(IEC61508)
External Memory USB, PCMCIA USB
Fieldbus FL-net, DeviceNet, PROFIBUS, PROFINET, F L - n e t , D e v i c e N e t ,
FL-net, DeviceNet, PROFIBUS, PROFINET, CC-Link,
CC-Link, EtherNet/IP, EtherCAT PROFIBUS, PROFINET, CC-
CC-Link IE, EtherNet/IP, EtherCAT
Open Air Type also supports CC-Link IE. Link, EtherNet/IP, EtherCAT

:For the correspondence between robot models and controller, please check the description of each robot models.

1:Dimension is varied due to robot types

2:This controller is an open air type, and should be installed in a “Pollution degree 2”environment regulated by IEC 60664-1, IEC/UL61010-1.“Pollution
degree 2”means a clean, office-like environment.

3:Overvoltage Category Ⅱ per IEC 60664-1. Overvoltage Category Ⅲ per IEC/UL 61010-1.

Safety & Reliability Service & Support


Industrial Standards Excellent Maintenance Services
Conformance for Safety
FANUC service team delivers customer trust and confidence
and Environment based on direction of service Maximizing Uptime ,
The FANUC Robot * series is manufactured at Global Service and Lifetime maintenance .
fully automated and robotized factories under
strict quality control, and meets ISO:9001
certifications. Conforming to the spirit of “Service First”, FANUC provides lifetime maintenance to its products
The FANUC Robot * series is compliant with for as long as they are used by customers, through more than 270 service locations supporting
more than 100 countries and regions throughout the world.
the European, American, Korean, etc. safety
standards, and has been certified with the CE, Maximizing Uptime
NRTL and KCs marking (with options for each
specification). TÜV marking and TÜV EMC
marking are attached when the European
specification for the robot is chosen.
Global Lifetime
Service Maintenance

FANUC ACADEMY
FANUC ACADEMY offer a variety of intensive robot training courses, from introductory
to advanced knowledge and skills for teaching, operation, engineering and
maintenance of FANUC robots and their applications. Hands-on training provides your
employees with the skills needed to operate and maintain your factory automation.

● Headquarters 3580, Shibokusa, Oshino-mura, Minamitsuru-gun


Yamanashi, 401-0597, JAPAN
Phone: (+81)555-84-5555 https://www.fanuc.co.jp/
● Overseas Affiliated Companies
FANUC America Corporation Phone: (+1)248-377-7000 https://www.fanucamerica.com/
FANUC Europe Corporation, S.A. Phone: (+352)727777-1 https://www.fanuc.eu/
SHANGHAI-FANUC Robotics CO., LTD. Phone: (+86)21-5032-7700 https://www.shanghai-fanuc.com.cn/
KOREA FANUC CORPORATION Phone: (+82)55-278-1200 https://www.fkc.co.kr/
TAIWAN FANUC CORPORATION Phone: (+886)4-2359-0522 https://www.fanuctaiwan.com.tw/
FANUC INDIA PRIVATE LIMITED Phone: (+91)80-2852-0057 https://www.fanucindia.com/
FANUC SINGAPORE PTE. LTD. Phone: (+65)6567-8566 https://www.fanuc.com/fsp/
FANUC THAI LIMITED Phone: (+66)2-714-6111 https://www.fanuc.com/fth/
FANUC MECHATRONICS (MALAYSIA) SDN. BHD. Phone: (+60)3-3082-1222 https://www.fanuc.com/fmm/
PT. FANUC INDONESIA Phone: (+62)21-4584-7285 https://www.fanuc.com/fin/
FANUC OCEANIA PTY. LIMITED Phone: (+61)2-8822-4600 https://www.fanucoceania.com.au/
FANUC SOUTH AFRICA (PROPRIETARY) LIMITED Phone: (+27)11-392-3610 https://fanuc.co.za/

All specifications are subject to change without notice.


No part of this catalog may be reproduced in any form.
The products in this catalog are controlled based on Japan's“Foreign Exchange and Foreign Trade Law". The
export from Japan may be subject to an export license by the government of Japan. Further, re-export to
another country may be subject to the license of the government of the country from where the product is
re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States 1995
government. Should you wish to export or re-export these products, please contact FANUC for advice. Robot i(E)-42, 2023.11, Printed in Japan

You might also like