RM84

miniature relays
88
RM84 RM84-...-01 ❶
• CTI 250
• 5000 V / 10 mm reinforced insulation
• For PCB and plug-in sockets
• AC and DC coils, insulation class F: 155 °C
• Available special versions: with transparent cover ❶;
MINIATURE

with the increased dielectric strength of the contact clearance ❷

• Compliance with standard EN 60335-1
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts 2 CO, 2 NO ❷
Contact material AgNi, AgNi/Au hard gold plating, AgSnO2
Rated / max. switching voltage AC 250 V / 400 V
Min. switching voltage 5 V AgNi, 5 V AgNi/Au hard gold plating, 10 V AgSnO2
Rated load (capacity) AC1 8 A / 250 V AC
AC15 3 A / 120 V 1,5 A / 240 V (B300)
DC1 8 A / 24 V DC (see Fig. 3)
DC13 0,22 A / 120 V 0,1 A / 250 V (R300)
Motor load acc. to UL 508 1/3 HP 240 V AC, 3,6 FLA, single-phase motor ❸
AC3 acc. to IEC 60947-4-1 0,37 kW 240 V AC, single-phase motor
Min. switching current 5 mA AgNi, 2 mA AgNi/Au hard gold plating, 10 mA AgSnO2
Max. inrush current 15 A AgSnO2
Rated current 8A
Max. breaking capacity AC1 2 000 VA
Min. breaking capacity 0,3 W AgNi, 0,05 W AgNi/Au hard gold plating, 1 W AgSnO2
Contact resistance ≤ 100 mΩ
Max. operating • at rated load AC1 600 cycles/hour
frequency • no load 72 000 cycles/hour
Coil data
Rated voltage 50/60 Hz AC 12, 24, 48, 60, 110, 115, 120, 220, 230, 240 V
DC 3, 5, 6, 9, 12, 18, 24, 36, 48, 60, 110 V
Must release voltage AC: ≥ 0,15 Un DC: ≥ 0,1 Un
Operating range of supply voltage see Tables 1, 2 and Fig. 4, 5
Rated power consumption AC 0,75 VA
DC 0,4 ... 0,48 W
Insulation according to EN 60664-1
Insulation rated voltage 400 V AC
Rated surge voltage 4 000 V 1,2 / 50 µs
Overvoltage category III
Insulation pollution degree 3
Dielectric strength • between coil and contacts 5 000 V AC type of insulation: reinforced
• contact clearance 1 000 V AC type of clearance: micro-disconnection
2 000 V AC contacts 2 NO, type of clearance: full-disconnection ❷
• pole - pole 2 500 V AC type of insulation: basic
Contact - coil distance • clearance ≥ 10 mm
• creepage ≥ 10 mm
General data
Operating / release time (typical values) 7 ms / 3 ms
Electrical life • resistive AC1 > 105 8 A, 250 V AC
(number of cycles) • cosφ see Fig. 2
• DC L/R=40 ms > 105 0,15 A, 220 V DC
Mechanical life (cycles) > 3 x 107
Dimensions (L x W x H) / Weight 29 x 12,7 x 15,7 mm / 14 g
Ambient temperature • storage -40...+85 oC
(non-condensation and/or icing) • operating AC: -40...+70 oC DC: -40...+85 oC -20...+70 oC ❶
Cover protection category IP 40 ❶ or IP 67 EN 60529
Environmental protection RTII ❶ or RTIII EN 61810-7
Shock resistance 20 g
Vibration resistance (NO/NC) 10 g / 5 g 10...150 Hz
Solder bath temperature max. 270 oC
Soldering time max. 5 s
The data in bold type relate to the standard versions of the relays. ❶ Relate to the special versions - relays with transparent cover, only available with
IP 40 and RTII, operating temperature -20...+70 °C. See ”Ordering codes”. ❷ Relate to the special versions - relays with two normally open contacts
2 NO, with increased contact gap - dielectric strength 2000 V AC, only available with DC coils. See ”Ordering codes”. ❸ For single phase motors for
110-120 V AC do not use motors with higher FLA than given for 240 V AC.

www.relpol.com.pl Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
 RM84
miniature relays
89

Dimensions Connection diagrams (pin side view)

MINIATURE
12,7
12,7
7,5

5 5 15,2 2,5 15,7 3,9

29

2 CO 2 NO
15,7

Terminal (pin) A1(1); A2(2) 22(3); 21(4); 24(5);

12(6); 11(7); 14(8)
[mm] Ø 0,6 0,5 x 0,9
Drilling hole:
3,9

• for relays Ø 1,3 + 0,1 mm

• for sockets Ø 1,5 + 0,1 mm

Pinout (solder side view)

2 CO 2 NO

5 5 15,2 2,5 5 20,2 2,5

2,5

2,5

8 × Ø 1,3 2,5 6 × Ø 1,3 2,5

Mounting, sockets and accessories for relays

Relays RM84 ❹ are designed for: • direct PCB mounting • plug-in sockets.

Accessories
Sockets Retainer Spring Description Additional
for RM84 / retractor clips wire clips plates features
Screw terminals sockets, 35 mm rail mount (acc. to EN 60715) or on panel mounting (one M3 screw)
GZT80 GZT80-0040 GZM80-0041 GZT80-0035 modules ❻, strips ❼
GZM80 GZT80-0040 GZM80-0041 GZT80-0035 modules ❻, strips ❼
GZS80 GZS-0040 GZM80-0041 TR modules ❻, strips ❼
GZF80 – GZM80-0041 – –
Spring terminals sockets, 35 mm rail mount (acc. to EN 60715)
GZMB80 ❺ GZMB80-0040 GZM80-0041 TR modules ❻
Sockets for PCB
EC 50 – MP16-2 ❽, MH16-2 – –
PW80 – MH16-2 – –
MP16-2 ❽,
GD50 – – –
MH16-2, GD-0016
❹ For relays with transparent cover: the distance at least 5 mm between the relays mounted side by side. ❺ Sockets GZMB80: wire connection - see
page 361. ❻ Signalling / protecting modules type M... - see page 376. ❼ Interconnection strips ZGGZ80 - see page 377. ❽ Plastic clips MP16-2.

Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]

 RM84
miniature relays
90
MINIATURE

AC1

N - electrical life
at AC1

DC1

In = 8 A

www.relpol.com.pl Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
 RM84
miniature relays
91

Coil data - DC voltage version Table 1

Coil resistance Coil operating range

Rated voltage Acceptable
Coil code at 20 °C V DC
V DC resistance

MINIATURE
Ω min. (at 20 °C) max. (at 20 °C)
1003 3 22 ± 10% 2,1 7,6
1005 5 60 ± 10% 3,5 12,7
1006 6 90 ± 10% 4,2 15,3
1009 9 200 ± 10% 6,3 22,9
1012 12 360 ± 10% 8,4 30,6
1018 18 710 ± 10% 12,6 45,9
1024 24 1 440 ± 10% 16,8 61,2
1036 36 3 140 ± 10% 25,2 91,8
1048 48 5 700 ± 10% 33,6 122,4
1060 60 7 500 ± 10% 42,0 153,0
1110 110 25 200 ± 10% 77,0 280,0
The data in bold type relate to the standard versions of the relays.

Coil data - AC 50/60 Hz voltage version Table 2

Coil resistance Coil operating range

Rated voltage Acceptable
Coil code at 20 °C V AC 50 Hz
V AC resistance
Ω min. (at 20 °C) max. (at 20 °C)
5012 12 100 ± 10% 9,6 13,2
5024 24 400 ± 10% 19,2 28,8
5048 48 1 550 ± 10% 38,4 57,6
5060 60 2 600 ± 10% 48,0 72,0
5110 110 8 900 ± 10% 88,0 132,0
5115 115 9 600 ± 10% 92,0 138,0
5120 120 10 200 ± 10% 96,0 144,0
5220 220 35 500 ± 10% 176,0 264,0
5230 230 38 500 ± 10% 184,0 276,0
5240 240 42 500 ± 15% 192,0 288,0
The data in bold type relate to the standard versions of the relays.

Interface relays
PI84 (PI85)
set: relay RM84 (RM85)
+ socket GZT80
(GZM80, GZMB80)
- see pages 198-225

Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]

 RM84
miniature relays
92

Ordering codes

Cover protection
category
MINIATURE

Type Contact Number and type Connection Coil code Cover Special
material of contacts mode version

R M 8 4 — — — —

Contact material

20 - AgNi
23 - AgNi/Au hard gold plating
30 - AgSnO2 see Tables 1, 2 page 91

Number and type of contacts

12 - 2 CO
22 - 2 NO Cover

without marks - standard cover (no transparent, white colour)

01 - transparent cover (special version, without signs recognitions) ❶
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Special version

without marks - basic version,

Connection mode dielectric strength of contact clearance 1000 V AC
(51) - contacts 2 NO, increased contact gap
5 - for PCB and sockets - dielectric strength 2000 V AC ❷

❶ 01: special version - relay with transparent cover, only available with IP 40 and RTII, operating temperature -20...+70 °C ❷ (51): special version
- relay with two normally open contacts 2 NO, with increased contact gap - dielectric strength 2000 V AC, only available with DC coil

Examples of ordering code:

RM84-3012-25-5024 relay RM84, for PCB and sockets, two changeover contacts,contact material AgSnO2,
coil voltage 24 V AC 50/60 Hz, in standard cover (no transparent, white colour) IP 40
RM84-2012-25-1012-01 relay RM84, for PCB and sockets, two changeover contacts, contact material AgNi, coil
voltage 12 V DC with transparent cover (special version, without signs recognitions)
IP 40
RM84-2322-35-1024 (51) relay RM84, special version with increased contact gap, for PCB and sockets, two nor-
mally open contacts, contact material AgNi/Au hard gold plating, coil voltage 24 V DC,
in standard cover (no transparent, white colour) IP 67

www.relpol.com.pl Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]