TSW202

PRELIMINARY DATASHEET

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
 PRELIMINARY DATASHEET // TSW202

HARDWARE

FRONT VIEW

Power socket Ethernet LEDs SFP ports

SFP status LEDs

Power LED PoE powered Status

Ethernet ports LED

BACK VIEW

Grounding Reset Integrated

screw Button DIN Rail

RJ45 LED MEANING

Orange LED on: link established Green LED on: link established
10/100 Mbps 1000 Mbps
Orange LED blinking: active connection

POWER SOCKET PINOUT

Power / Red wire Ground / Black wire

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 2
 PRELIMINARY DATASHEET // TSW202

FEATURES

ETHERNET
8 x RJ45 ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover"

2 x SFP ports

IEEE 802.1p, IEEE 802.1Q, 802.3az

PoE OUT
PoE ports Port 1 - 8

PoE standards 802.3af and 802.3at

PoE Max Power per Port (at PSE) 30 W

Total PoE Power Budget (at PSE) 240 W

Maximum Ethernet cable length 100 m

PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking) 20 Gbps

Packet buffer 512 KB

MAC address table size 8K entries

Jumbo frame support 10000 bytes

SYSTEM CHARACTERISTICS

RAM 128MB DDR3

FLASH storage 16MB serial flash

SERVICES
Ethernet/IP Yes

SNMP V2,V3 Yes

Profinet Yes

NETWORK

Loop protection Yes

Forwarding table Yes

Energy Efficient Ethernet

Yes
(IEEE 802.3az) compliant

VLAN configuration Yes

Number of Static Manual LAGs

8/8
and # of members

Supported Multicast groups 512

Port Mirroring Yes

MRP Client/Manager modes Yes

STP/RSTP Yes

Cable diagnostic Yes

PoE Management Yes

Port Settings, (Enable/disable,

Yes
link speed control)

Port isolation Yes

Static routing Yes

Jumo frames Yes

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 3
 PRELIMINARY DATASHEET // TSW202

IPv6 support,
Yes
DHCPv6, Static IPv6

DHCP client Yes

Storm control Yes

QOS
Priority queuing SP/WFQ/WRR

Rate Limiting Yes

DSCP Yes

IEEE 802.1p COS Yes

TOS Yes

WRR (Weighted Round Robin) Yes

Strict Priority queue technology Yes

POWER

Connector 2-pin industrial DC power socket

Input voltage range 7 - 57 VDC

Input voltage range for PoE 44 - 57 VDC

Power consumption Idle: 3 W / PoE Max: 250 W

PHYSICAL INTERFACES

Ethernet 8 x RJ45 ports, 10/100/1000 Mbps

Fiber 2 x SFP ports

Status LEDs 1 x Power LED, 1 x Aux LED, 16 x Ethernet Status LEDs, 2x SFP status LEDs

Power 1 x 2-pin industrial DC power socket

Reset Software reset button

Grounding Screw terminal

PHYSICAL SPECIFICATION

Casing material Anodized aluminum housing and panels

Dimensions (W x H x D) 132 x 44.2 x 122 mm

Weight 610 g

Mounting options Integrated DIN rail bracket or wall mounting (additional kit needed), flat surface placement.

OPERATING ENVIRONMENT
Operating temperature -40 °C to 75 °C

Operating humidity 10 % to 90 % non condensing

Ingress Protection Rating IP30

CERTIFICATION & APPROVALS

Regulatory CE, CB, RCM, FCC, IC

SAFETY
Standards EN 55032:2015+A1:2020; EN 55035:2017+A11:2020; EN IEC 61000-6-2:2019

ESD EN 61000-4-2:2009

Radiated Immunity EN IEC 61000-4-3:2020

EFT EN 61000-4-4:2012

Surge Immunity
EN 61000-4-5:2014+A1:2017
(AC Mains Power Port)

CS EN 61000-4-6:2014

DIP EN IEC 61000-4-11:2020

Standards IEC 62368-1:2018

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 4
 PRELIMINARY DATASHEET // TSW202

WHAT'S IN THE BOX?

STANDARD PACKAGE CONTAINS

• TSW202
• QSG (Quick Start Guide)
• Packaging box

TSW202

STANDARD ORDER CODES

PRODUCT CODE HS CODE HTS CODE PACKAGE CONTAINS

TSW202 000000 851762 8517.62.00 Standard package
For more information on all available packaging options – please contact us directly.

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 5
 PRELIMINARY DATASHEET // TSW202

TSW202 SPATIAL MEASUREMENTS & WEIGHT

MAIN MEASUREMENTS
W x H x D dimensions for TSW202:
Device housing*: 132 x 44.2 x 122 mm
Box: 173 x 71 x 148 mm
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

TOP VIEW
The figure below depicts the measurements of TSW202 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of TSW202 and its components as seen from the right side:

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 6
 PRELIMINARY DATASHEET // TSW202

FRONT VIEW
The figure below depicts the measurements of TSW202 and its components as seen from the front panel side:

REAR VIEW
The figure below depicts the measurements of TSW202 and its components as seen from the back panel side:

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 7
 PRELIMINARY DATASHEET // TSW202

MOUNTING SPACE REQUIREMENTS

The figure below depicts an approximation of the device's dimensions when cables and antennas are attached:

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 8