Submittal Transmittal

design coordinates, inc.

Southern Star Aeropack Project
FIT Brgy. Pagaspas, Tanauan Batangas
contract package no. : CP27 S,D and I for ACS * refer to approved submittal schedule dated June 01, 2021

transmittal to: DESIGN COORDINATES, INC. from: COMSEC

I Construction Project Managers Contractor

submittal no. : AERO-CP27-SUT-010 previous no. :

 new submittal date :06-01-21
 resubmittal ___ 1st ___
2nd ___ 3rd date :
qty. title / description / manufacturer specs. section, title and paragraph / drawing, detail reference

1 Power Supply CTSPS140/CTSPS14DPCB see attached

name, title and signature of contractor's authorized representative date received date required +/-
from contractor from contractor *
Mario C. Umil 06-01-21 06-01-21 0
Kevin Joseph S. Diocales
received by: DESIGN COORDINATES, INC.
Construction Project Managers
other remarks on above submission :

transmittal to: date received received by:

Consultant MPI by consultant MPI
II from: DESIGN COORDINATES, INC. Consultant 04Jun2021
Construction Project Managers 02-Jun-21
other remarks on above submission :

transmittal to: DESIGN COORDINATES, INC. from: MPI

Consultant
III Construction Project Managers
action (encircle one) w/comment
A approved B approved as noted C revise and resubmit as noted D disapproved / new submittal required
Notes

SAME COMMENT AND APPROVAL WITH STAR-CP09B-SUT-025

name, title and signature of approving authority date returned date required from +/-
by consultant consultant *
18-Jun-21 13-Jun-21 -5

Kevin Joseph S. Diocales

G.Telan / M.Melendez received by: DESIGN COORDINATES, INC.
Construction Project Managers
other remarks on above submission :

date returned date required +/-

transmittal to : to contractor by contractor*
IV Contractor COMSEC 19-Jun-21 15-Jun-21 -4
from : DESIGN COORDINATES, INC.
Construction Project Managers received by: COMSEC
Contractor
copies : Owner Architect Quantity Surveyor Others

DCI-SUT rev. 01 Page 1 of 1

pioneer
design coordinates, inc. suite 202, itc building 337 sen.gil puyat ave., makati city 1209  phone: +63 2 8961981-84
people
fax: +63 2 8999276  email: [email protected]  website: www.dci.com.ph
construction project managers
 Submittal Transmittal
design coordinates, inc.
Southern Star Project
FIT Brgy. Pagaspas, Tanauan Batangas
contract package no. : CP-09B ACS Power Supply * refer to approved submittal schedule dated May 05, 2021

transmittal to: DESIGN COORDINATES, INC. from: COMSEC

I Construction Project Managers Contractor

submittal no. : Star CP-09-B-SUT- 025 previous no. :

 new submittal date :05-05-21
 resubmittal ___ 1st ___
2nd ___ 3rd date :
qty. title / description / manufacturer specs. section, title and paragraph / drawing, detail reference

1 ACS Power Supply CTSPS14D/CTSPS14DPCB with Enclosure (Brand:IOT) see attached

name, title and signature of contractor's authorized representative date received date required +/-
from contractor from contractor *
Mario C. Umil 07 May 2021 05-05-21 -2
Type text here Jim Mercado
Gerry Lee received by: DESIGN COORDINATES, INC.
Construction Project Managers
other remarks on above submission :

transmittal to: date received received by:

Consultant MPI by consultant MPI
II from: DESIGN COORDINATES, INC. Consultant
10MAY21

Construction Project Managers 10 May 2021

other remarks on above submission :

transmittal to: DESIGN COORDINATES, INC. from: MPI

Consultant
III Construction Project Managers
action (encircle one)
w/comment
A approved B approved as noted C revise and resubmit as noted D disapproved / new submittal required
Notes

SEE COMMENTS INSIDE

name, title and signature of approving authority date returned date required from +/-
by consultant consultant *
12 May 2021 19 May 2021 5
Judy Tenorio
G.Telan / M.Melendez received by: DESIGN COORDINATES, INC.
Construction Project Managers
other remarks on above submission :

date returned date required +/-

transmittal to : to contractor by contractor*
IV Contractor COMSEC 12 May 2021 19 May 2021 5
from : DESIGN COORDINATES, INC.
Construction Project Managers received by: COMSEC
Contractor
copies : Owner Architect Quantity Surveyor Others

DCI-SUT rev. 01 12 May 2021 Page 1 of 1

pioneer
design coordinates, inc. suite 202, itc building 337 sen.gil puyat ave., makati city 1209  phone: +63 2 8961981-84
people
fax: +63 2 8999276  email: [email protected]  website: www.dci.com.ph
construction project managers
 ”Creating Embedded Intelligence in Things”

1. Coordinate with other trades prior implementation.

2. Ensure proper wiring management upon installation .
3. Provide proposed location of this power supply

Specications:
INPUT REQUIREMENTS
CTSPS14D
Input Voltage Voltage Ranges 230Vac+10%-15%
Inrush Current 40A peak maximum (Measuring at 230VAC and full load cold start)
Input Frequency 47-63Hz

CTSPS14DPCB OUTPUT REQUIREMENTS

12May21 Output Voltage 13.8V

Minimum Current 0A

CTSPS14D WITH
ENCLOSURE
Maximum Current
Peak Current
Max. Line Regulation
3A
3.5A
± 1%

CTSPS14DPCB Ripple & Noise

Tolerance
±1%p-p or 120mV
2%

POWER SUPPLY 12VDC 3A ELECTRICAL CHARACTERISTICS

Output voltage return to within 1% in Less than
Transient Response 2.5ms for a 50% dynamic load peak which does
not exceed a 5% voltage deviation
Turn-on and turn-off overshoot should not exceed
Overshoot 3% over nominal voltage
Maximum 20W Continuous Output with LED Indicator for Operating Status.
Air Convection. Efficiency 70% typical, -65% minimum (Measuring at 230V and full load)

Turn on Delay 0.2 second maximum at 230 VAC

Hold Up Time 20 ms minimum at 230 VAC and full at rated maximum load

Adjustability Output user adjustable ±5% minimum

Power Supply On and Green LED designated as 'LED 1' on the PCB. when this LED
DC Good Signal is on, it indicates that the supply is operating and DC out good.

ELECTRICAL CHARACTERISTICS
Dimensions (mm) 130(L) x 98(W) x 42(H)
Weight Maximum Weight is 0.5Kg
Identification All identication labels must be laser printed and be heat
resistant fail type

ENVIRONMENTAL REQUIREMENTS
•Battery and Auxiliary Out •AC Input Connector
Operating Temperature 0°C~45°C
Pin1 AC LINE
L N FG V GND Storage Temperature -20°C ~70°C
(AC)
Pin2 AC NEUTRAL
Operating Humidity 5% ~ 90% RH, Non condensing
Pin3 GND
Storage Humidity 5% ~ 95% RH, Non-condensing
L BATT.
SAFETY AND EMI REQUIREMENTS
N •Main Input Connector
Standards EN60950,EN 501301-4, EN50081, EN54-4:1997
Pin1 +V OUT
I/P-OP: 3KVAC/min
Pin2 -V OUT
Hi-Pot I/P-FG: 1.5KVAC/min
Cut-out Current: 3.5mA Max

Copyright @ 2014 Internet Of Things Philippines Inc. All rights reserved