CA3161

August 1997 BCD to Seven Segment Decoder/Driver

Features Description
• TTL Compatible Input Logic Levels The CA3161E is a monolithic integrated circuit that performs
the BCD to seven segment decoding function and features
• 25mA (Typ) Constant Current Segment Outputs
constant current segment drivers. When used with the
• Eliminates Need for Output Current Limiting Resistors CA3162E A/D Converter the CA3161E provides a complete
digital readout system with a minimum number of external
• Pin Compatible with Other Industry Standard parts.
Decoders
• Low Standby Power Dissipation . . . . . . . . 18mW (Typ)

Ordering Information
TEMP. PKG.
PART NUMBER RANGE (oC) PACKAGE NO.

CA3161E 0 to 70 16 Ld PDIP E16.3

Pinout Functional Block Diagram

CA3161

SEGMENT DRIVER OUTPUTS

(PDIP) 13
6 a
23
BCD INPUTS

TOP VIEW 12
2 b
22 INPUT BCD TO 11
1 BUFFERS 7 SEGMENT CONSTANT c
21 DECODER CURRENT 10
7 SEGMENT d
20 9
DRIVERS e
BCD INPUTS

15
f
21 1 16 V + 14
g
SEGMENT DRIVER OUTPUTS

22 2 15 f BIAS
CIRCUITRY
NC 3 14 g

NC 4 13 a

NC 5 12 b 8 GND 16
BCD INPUTS

23 6 11 c
V+
20 7 10 d
9 e SEGMENT
GND 8
a-g
a
f b
g
e c
d

SEGMENT DRIVER SEGMENT

IDENTIFICATION

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. File Number 1079.3
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
9-5
 CA3161

Absolute Maximum Ratings Thermal Information

DC VSUPPLY (Between Terminals 1 and 10) . . . . . . . . . . . . . . +7.0V Thermal Resistance (Typical, Note 2) θJA (oC/W)
Input Voltage (Terminals 1, 2, 6, 7). . . . . . . . . . . . . . . . . . . . . . +5.5V PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Output Voltage Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150oC
Output “Off”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7V Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC
Output “On” (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +10V Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC

Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . .0oC to 75οC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES:
1. This is the maximum output voltage for any single output. The output voltage must be consistent with the maximum dissipation and
derating curve for worst case conditions. Example: All segments “ON”, 100% duty cycle.
2. θJA is measured with the component mounted on an evaluation PC board in free air.

Electrical Specifications TA = 25oC

PARAMETER TEST CONDITIONS MIN TYP MAX UNITS

VSUPPLY Operating Range, V + 4.5 5 5.5 V

Supply Current, l+ (All Inputs High) - 3.5 8 mA

Output Current Low (VO = 2V) 18 25 32 mA

Output Current High (VO = 5.5V) - - 250 µA

Input Voltage High (Logic “1” Level) 2 - - V

Input Voltage Low (Logic “0” Level) - - 0.8 V

Input Current High (Logic “1”) 2V -30 - - µA

Input Current Low (Logic “0”) 0V -40 - - µA

Propagation Delay Time, tPHL - 2.6 - µs

tPLH - 1.4 - µs

9-6
 CA3161

TRUTH TABLE

BINARY INPUTS OUTPUTS

STATE 23 22 21 20 a b c d e f g DISPLAY
0 L L L L L L L L L L H

1 L L L H H L L H H H H

2 L L H L L L H L L H L

3 L L H H L L L L H H L

4 L H L L H L L H H L L

5 L H L H L H L L H L L

6 L H H L L H L L L L L

7 L H H H L L L H H H H

8 H L L L L L L L L L L

9 H L L H L L L L H L L

10 H L H L H H H H H H L

11 H L H H L H H L L L L

12 H H L L H L L H L L L

13 H H L H H H H L L L H

14 H H H L L L H H L L L

15 H H H H H H H H H H H
BLANK

9-7
 CA3161

All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com

Sales Office Headquarters

NORTH AMERICA EUROPE ASIA
Intersil Corporation Intersil SA Intersil (Taiwan) Ltd.
P. O. Box 883, Mail Stop 53-204 Mercure Center Taiwan Limited
Melbourne, FL 32902 100, Rue de la Fusee 7F-6, No. 101 Fu Hsing North Road
TEL: (407) 724-7000 1130 Brussels, Belgium Taipei, Taiwan
FAX: (407) 724-7240 TEL: (32) 2.724.2111 Republic of China
FAX: (32) 2.724.22.05 TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029

9-8