Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    Inspection Periods 3M™ DBI-SALA® Lad-Saf™ Vertical Fall-Arrest Cable System and Type 1 Device

    Uploaded by

    Sagar Raut
    The document discusses inspection periods for 3MTM DBI-SALA® Lad-SafTM vertical fall arrest cable systems and Type 1 devices. It provides inspection intervals for Lad-SafTM System Type One, Lad-SafTM System Type Two, and Lad-SafTM Sleeves. Inspections are important to ensure ongoing safe use and should be done according to standards and manuals by users before/after use and inspectors every few years or months depending on the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Inspection Periods 3M™ DBI-SALA® Lad-Saf™ Vertical Fall-Arrest Cable System and Type 1 Device

    Uploaded by

    Sagar Raut
    99 views2 pages
    The document discusses inspection periods for 3MTM DBI-SALA® Lad-SafTM vertical fall arrest cable systems and Type 1 devices. It provides inspection intervals for Lad-SafTM System Type One, Lad-SafTM System Type Two, and Lad-SafTM Sleeves. Inspections are important to ensure ongoing safe use and should be done according to standards and manuals by users before/after use and inspectors every few years or months depending on the system.

    Original Description:

    Inspection Periods 3M™ DBI-SALA® Lad-Saf™ Vertical Fall-Arrest Cable System and Type 1 Device

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses inspection periods for 3MTM DBI-SALA® Lad-SafTM vertical fall arrest cable systems and Type 1 devices. It provides inspection intervals for Lad-SafTM System Type One, Lad-SafTM System Type Two, and Lad-SafTM Sleeves. Inspections are important to ensure ongoing safe use and should be done according to standards and manuals by users before/after use and inspectors every few years or months depending on the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views2 pages

    Inspection Periods 3M™ DBI-SALA® Lad-Saf™ Vertical Fall-Arrest Cable System and Type 1 Device

    Uploaded by

    Sagar Raut
    The document discusses inspection periods for 3MTM DBI-SALA® Lad-SafTM vertical fall arrest cable systems and Type 1 devices. It provides inspection intervals for Lad-SafTM System Type One, Lad-SafTM System Type Two, and Lad-SafTM Sleeves. Inspections are important to ensure ongoing safe use and should be done according to standards and manuals by users before/after use and inspectors every few years or months depending on the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    May 2020

    Inspection Periods 3M™ DBI-SALA® Lad-Saf™ Vertical Fall-Arrest


    Cable System and Type 1 Device
    Inspections of the DBI-SALA® Lad-Saf™ Vertical Fall-Arrest Cable System and DBI-SALA® Lad-Saf™
    Cable Sleeve (Type 1 Device) are an important part of an effective safety program. The frequency of the
    inspections as well as who should perform these activities are critical issues.

    To ensure the ongoing safe use of these products, inspections shall be completed at the below intervals
    as recommended by 3M™ Fall Protection as the manufacturer of the DBI-SALA® Lad-Saf™ system and
    aligned with the requirements of Australian and New Zealand Standard AS/NZS 1891.4 specifically
    relating to Vertical Lifelines dependent on the type of Lad-Saf™ system installed.

    Lad-Saf™ System Type One – Current System

    1. Inspection by the user1 before and after use as per the specific User Instruction Manual.
    2. Inspection by a height safety equipment inspector2 not exceeding three (3) years (based on the
    structure inspection criteria) as per the specific User Instruction Manual.
    3. In harsh or unique environments more frequent inspections may be required.
    Lad-Saf™ System Type Two – Previous System

    1. Inspection by the user1 before and after use as per the specific User Instruction Manual.
    2. Inspection by a height safety equipment inspector2 not exceeding twelve (12) months as per the
    specific User Instruction Manual.
    3. In harsh or unique environments more frequent inspections may be required.

    Lad-Saf™ Sleeve – Type 1 Device


    1. Inspection by the user1
    before and after use as per the specific User Instruction Manual.
    2. Inspection by a height safety equipment inspector2 every 6 months as per the specific User
    Instruction Manual.
    3. In harsh or unique environments more frequent inspections may be required.

    For further information, please refer to the relevant standard, the product Instructions for Use, contact
    your local 3M Fall Protection Sales Representative or contact 3M Fall Protection Customer Service at
    [email protected] or on: 1800 245 002

    1Height Safety Operator – a person who is able to perform harness based work at heights under the direct
    supervision of a height safety supervisor. If the person is not competent to carry out this inspection it is to be
    undertaken by another person who is competent.

    2 Height Safety Equipment Inspector – a person who has completed the 3M™ Lad-Saf™ Installation Course, holds a
    valid Installer’s Certificate, is competent in the skills needed to detect faults in height safety equipment and to determine
    remedial action and to document the inspection.

    Competent Person – A person who has, through a combination of training, qualification and experience, acquired
    knowledge and skills enabling that person to correctly perform a specified task.

    3M, DBI-SALA and Lad-Saf are


    trademarks of 3M. © 3M 2020.

    You might also like